7404 00 99 — Waste and scrap, of copper alloys (excl. of copper-zinc alloys, ingots or other similar unwrought shapes, of remelted waste and scrap of copper alloys, ashes and residues containing copper alloys, and waste and scrap of primary cells, primary batteries and electric accumulators)
Waste and scrap, of copper alloys (excl. of copper-zinc alloys, ingots or other similar unwrought shapes, of remelted waste and scrap of copper alloys, ashes and residues containing copper alloys, and waste and scrap of primary cells, primary batteries and electric accumulators)
Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.
Where it sits in the nomenclature
Section XV. Base metals and articles of base metal
- 74Copper and articles thereof
- 7404Waste and scrap, of copper (excl. ingots or other similar unwrought shapes, of remelted copper waste and scrap, ashes and residues containing copper, and waste and scrap of primary cells, primary batteries and electric accumulators)
- 7404 00Waste and scrap, of copper (excl. ingots or other similar unwrought shapes, of remelted copper waste and scrap, ashes and residues containing copper, and waste and scrap of primary cells, primary batteries and electric accumulators)
- 7404 00 99you are here
Codes inside
Only the ten-digit code carries a duty rate
| Code | Name | Duty |
|---|---|---|
| 7404 00 990 0 | Waste and scrap, of copper alloys (excl. of copper-zinc alloys, ingots or other similar unwrought shapes, of remelted waste and scrap of copper alloys, ashes and residues containing copper alloys, and waste and scrap of primary cells, primary batteries and electric accumulators) | 0% |
Explanatory notes to heading 7404 3 paragraphs
Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.
7404 Copper waste and scrap
The provisions of the HS Explanatory Note to heading 7204 relating to waste and scrap are applicable, mutatis mutandis, to this heading, other than copper slag, copper scale and copper
residues dealt with in heading 2620. The copper waste of this heading includes sludge obtained by drawing copper and containing mainly copper powder mixed with lubricant used in drawing. This heading does not cover ingots or similar untreated forms of remelted copper waste and scrap (heading 7403).
Official text adopted by a Recommendation of the EEC Board
Notes to chapter 74 — Copper and articles thereof 14 items
Note
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
1. The terms used in this chapter mean:
(a) “refined copper” means a metal containing not less than 99.85 % by weight of copper or a metal containing not less than 97.5 % by weight of copper, provided that the content by weight of each other element does not exceed the limits specified in the following table:
Other elements
Element
Maximum content, wt.%
Ag
silver
0.25
As
arsenic
0.5
Cd
cadmium
1.3
Cr
chromium
1.4
Mg
magnesium
0.8
Pb
lead
1.5
S
sulfur
0.7
Sn
tin
0.8
Te
tellurium
0.8
Zn
zinc
1.0
Zr
zirconium
0.3
Other elements* (each of them)
0.3
* Other elements include, for example, Al, Be, Co, Fe, Mn, Ni, Si
(b) "copper alloys" means metal alloys, other than unrefined copper, in which copper is greater in mass than any other element, provided that:
(i) the mass content of at least one of the other elements exceeds the limit indicated in the above table; or
(ii) the total content of other elements exceeds 2.5 % by weight.
(c) "ligatures" means alloys containing, among other elements, more than 10 % by weight of copper, not suitable for deformation in the cold state and used mainly as additives in the manufacture of other alloys or as oxidants, desulphurators or for other similar purposes in non-ferrous metallurgy. However, copper phosphide (copper phosphorus) containing more than 15 % by weight of phosphorus is classified in heading 2853.
Subheading notes
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
1. The terms used in this group have the following meanings:
(a) “copper and zinc (brass)-based alloys” means alloys of copper and zinc, whether or not containing other elements. If other elements are present, then:
zinc by weight must exceed each of these other elements.
- in the presence of nickel, its content should not exceed 5 wt.% (see copper-nickel-zinc alloys (neusilbers)); and
- in the presence of tin, its content should not exceed 3 wt.% (see copper-tin alloys (bronzes)).
(b) “alloys based on copper and tin (bronze)” means alloys of copper and tin containing or not containing other elements. In the presence of other elements, the tin content by weight exceeds the content by weight of each of these elements, except when the content of tin 3 wt.% or more zinc content by weight may exceed the content by weight of tin, but it should be less than 10 wt.%.
(c) "alloys based on copper, nickel and zinc (neusilbers)" means alloys of copper, nickel and zinc, whether or not containing other elements. The nickel content is 5 wt.% or more (see copper-zinc alloys (brass)).
(d) “copper and nickel-based alloys” means alloys of copper and nickel containing or not containing other elements, but in any case with a content not exceeding 1% by weight of zinc. In the presence of other elements, the nickel content by weight exceeds the content by weight of each of these elements.
The right code is in the HS code search.