4410 11 30 — Particle board of wood, whether or not agglomerated with resins or other organic binding substances, surface-covered with melamine-impregnated paper (excl. oriented strand board and waferboard, fibreboard and cellular wood panels)

4410 Particle board, oriented strand board (OSB) and similar board (for example, waferboard) of wood or other ligneous materials, whether or not impregnated with resins or other organic binding substances: – Of wood: 4410 11 – – Particle board 4410 12 – – Oriented strand board (OSB) 4410 19 – – Other 4410 90 – Other

Particle board is a flat product of different length, width and thickness, made by pressing or extrusion. Slabs are usually made from wood chips or shavings obtained by mechanical grinding of round timber or wood waste. They can also be made from other wood materials.

such as particles obtained from bagasse, bamboo, cereal straw or flax or hemp shives. Particle board is agglomerated by the addition of an organic binder, usually a thermosetting resin, amounting to not more than 15% of the weight of the board. The chips, particles or other elements forming the particle board of this heading can easily be distinguished at the edges of the board with the naked eye. However, in some cases microscopic examination may be required to distinguish the particles and other elements from the ligno-cellulosic fibres forming the fibreboard of heading 4411. The heading also covers: (1) Oriented strand board, made of layers of thin wood strands the length of which is at least 2 times their width. The strands are mixed with binders (usually water-resistant), such as isocyanate or phenolic resins, and laid in layers forming a thick mat in which, to give the board its elastic-mechanical properties, the strands in the surface layers are usually oriented lengthwise and those in the inner layers are oriented crosswise or laid randomly. The mat is subjected to heat and pressure to produce a solid, uniform, strong structural board. (2) Waferboard, made of thin wood wafers the length of which is less than 2 times their width. The wafers are mixed with binders (usually water-resistant), such as isocyanate or phenolic resins, and laid randomly, thus forming a thick mat. The mat is subjected to heat and pressure to produce a solid, uniform structural board of high strength and water resistance. Particle board of this heading is usually sanded. Moreover, it may be impregnated with one or more substances not required for the agglomeration of the materials forming the board but giving it additional properties, for example, impermeability to water, resistance to rot or insect attack, resistance to ignition or the spread of fire, resistance to chemical agents or electric current, increased density. In the latter case the quantity of impregnating substances is considerably increased. Extruded boards may have internal channels running along their entire length. The heading also covers laminated wood panels consisting of: (1) a particle board faced on one or both sides with fibreboard; (2) several particle boards, whether or not faced on one or both sides with fibreboard; (3) several particle boards and several fibreboards assembled in any order. Goods of this heading are classified here whether or not they have been worked to obtain the profiles of goods of heading 4409; they may be curved, corrugated, perforated, cut or formed to shapes other than square or rectangular, and are classified here whether or not their surface, edges or ends have been worked, faced or coated (for example, with textile material, plastics, paint, paper or metal) or subjected to any

other operation, provided that these operations do not give them the essential character of articles of other headings. The heading does not cover: (a) plates or strips or tape of plastics containing wood flour as a filler (Chapter 39); (b) veneered particle board and similar board (for example, oriented strand board and waferboard), whether or not they have internal channels running along their full length (heading 4412); (c) cellular wood panels faced on both sides with particle board (heading 4418); (d) board of ligneous materials agglomerated with cement, plaster or other mineral binding substances (heading 6808). The heading further excludes goods having the character of articles or parts of articles more specifically described in other headings, whether or not obtained directly by pressing, extrusion or moulding or by other processes.

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) wood in the form of chips, chips, sawdust or powder used principally in perfumery, pharmacy or for insecticidal, fungicidal or similar purposes (heading 1211);

(b) bamboo or other woody materials principally used for weaving, untreated, split or unsplit, not sawn or sawn along or cut or cut in length (heading 1401);

(c) wood in the form of chips, chips, sawdust or powder used principally for dyeing or tanning (heading 1404);

(d) activated charcoal (heading 3802);

(e) articles of heading 4202;

(f) goods of Chapter 46;

(g) Shoes or parts thereof of Chapter 64;

(h) goods of Chapter 66 (e.g. umbrellas, canes and parts thereof);

(ij) the goods of heading 6808;

(k) jewelry of heading 7117;

(l) goods of Section XVI or XVII (e.g. parts of machinery, casings, lids, machinery and apparatus and articles of master coachmen);

(m) goods of Title XVIII (e.g. watch cases, musical instruments and parts thereof);

(n) parts of firearms (heading 9305);

(o) articles of Chapter 94 (e.g. furniture, fixtures and lighting equipment, prefabricated constructions);

(p) Articles of Chapter 95 (e.g. toys, games, sports equipment);

(q) articles of Chapter 96 (e.g., pipes and parts thereof, buttons, pencils, monopores, bipeds, tripods and the like), with the exception of wooden housings and pens for articles of heading 9603; or

(r) Articles of Chapter 97 (e.g. works of art).

2. In this chapter, the term “pressed wood” means wood that has undergone chemical or physical treatment (when the layers are joined together, the treatment must be greater than necessary for simple bonding of the layers), resulting in increased density or hardness together with improved mechanical strength or resistance to chemical or electrical effects.

3. Headings 4414 to 4421 cover articles of the corresponding description of chipboards or similar boards, fibreboards, layered or pressed wood, similar to wood products.

4. The articles of heading 4410, 4411 or 4412 may be given the profile characteristic of the articles of heading 4409 and may be curved, corrugated, perforated, cut or shaped in a different shape than square or rectangular, or subjected to any other treatment, provided that this does not give them the properties of the articles of other headings.

5. Heading 4417 does not include tools whose blade, working edge, working surface or other working part is made of any of the materials listed in note 1 to Chapter 82.

6. Subject to the provisions of Note 1 above, and unless the context otherwise requires, the term “wood” in the headings of this Chapter also applies to bamboo and other woody materials.

Subheading notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. For the purposes of subheading 4401 31, the expression ‘wood pellets’ means by-products, such as cutter shavings, sawdust or chips, of the mechanical wood-processing industry, furniture-making industry or other wood-transformation activities, which have been agglomerated either directly by compression or by the addition of a binder in a proportion not exceeding 3 % by weight. Such pellets are cylindrical, with a diameter not exceeding 25 mm and a length not exceeding 100 mm.

2. For the purposes of subheading 4401 32, the expression ‘wood briquettes’ means by-products such as cutter shavings, sawdust or chips, of the mechanical wood processing industry, furniture making or other wood transformation activities, which have been agglomerated either directly by compression or by addition of a binder in a proportion not exceeding 3 % by weight. Such briquettes are in the form of cubiform, polyhedral or cylindrical units with the minimum cross-sectional dimension greater than 25 mm.

3. For the purposes of subheading 4407 13, ‘S-P-F’ refers to wood sourced from mixed stands of spruce, pine and fir where the proportion of each species varies and is unknown.

4. For the purposes of subheading 4407 14, ‘Hem-fir’ refers to wood sourced from mixed stands of Western hemlock and fir where the proportion of each species varies and is unknown.

Additional notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of heading 4405, the term “wood flour” means wood powder not more than 8 wt.% of which is retained on a sieve with holes of 0.63 mm.

2. В подсубпозициях 4418 11 100 0, 4418 21 100 0 и 4420 90 910 0 термин «древесина тропических пород» означает древесину следующих пород: аукумея Клайна, триплохитон твердосмольный, энтандрофрагма цилиндрическая, энтандрофрагма полезная, кайя иворензис, мимузопс Геккеля, хлорофора высокая, или африканское тиковое дерево, энтандрофрагма ангольская, мансония высокая, иломба, или пикнантус анголезский, ловоа (виды), терминалия пышная, лофира крылатая, шорея с темно-красной древесиной, шорея с бледно-красной древесиной, шорея бакау, древесина различных видов шореи, парашореи, пентакме, заболонная древесина шореи всех видов, парашорея, шорея фагуцина и другие виды шореи, фрагрэа душистая, двукрылоплодник, гонистилюс Варбурга, дриабаланопс ароматный, или камфорное дерево, тик, jongkong, интсия Бейкера, диера тонкоребристая, коомпассия, вирола суринамская, махогониевое, или красное дерево (Swietenia spp.), феба пористая, бальза, палисандр Рио, палисандр Пара и бразильское розовое дерево.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. В подсубпозициях 4403 49 950 2, 4407 29 150 2, 4407 29 830 1, 4407 29 850 1, 4407 29 950 1, 4408 39 550 1, 4408 39 550 5, 4408 39 550 8, 4408 39 700 1, 4408 39 850 1, 4408 39 850 5, 4408 39 850 8, 4408 39 950 1, 4408 39 950 5, 4408 39 950 8, 4412 10 000 1, 4412 10 000 4, 4412 31 900 1, 4412 41 000 1, 4412 51 000 1, 4412 91 000 1 термин «древесина тропических пород» означает древесину следующих пород: митрагина прилистниковая, кайя иворензис, афрормозия (виды), брахистегия (виды), фрагрэа душистая, карапа гвианская, или крабовое дерево, aningre, туррэантус африканский, лофира крылатая, balau, бальза, гварея пахучая с бледно-розовой древесиной, гварея пахучая с розовато-коричневой древесиной, приория копаифера, цедрела (виды), пиптадения африканская, шорея (виды), ловоа (виды), афзелия, терминалия иворенская, кордия Гоэлда, сырное дерево, fuma, кратоксилон древовидный, иломба, или пикнантус анголезский, феба пористая, паратекома, хлорофора высокая, или африканское тиковое дерево, бразильский копал, диера тонкоребристая, кариниана легалис, jongkong, дриабаланопс ароматный, или камфорное дерево, коомпассия, двукрылоплодник (виды), энтандрофрагма Кандолля, цистантера макоцветная, koto, шорея с бледно-красной древесиной, терминалия пышная, кордия (виды), плантимисциум (виды), махогониевое, или красное дерево, мимузопс Геккеля, квалеа (один из видов), мансония высокая, тарриетия (виды), шорея бакау, хопея (виды), интсия Бейкера, merpauh, анизоптера (виды), moabi, тарриетия полезная, триплохитон твердосмольный, аукумея Клайна, onzabili, orey, ovengkol, озиго, или пахилобус бутнеров, птерокарпус гибонский, драконтомелум дао, палисандр Гватемала, палисандр Пара, палисандр Рио, бразильское розовое дерево, эуксилофора парэнзис, pau marfim, альстония конгензис, тетрамериста оголенная, вохизия гондурасская, гонистилюс Варбурга, энтандрофрагма цилиндрическая, бомбакопсис, псевдосиндора болотная, энтандрофрагма полезная, sucupira, suren, tauari, тик, энтандрофрагма ангольская, госсвейлеродендрон бальзамный, вирола суринамская, древесина различных видов шореи, парашореи и пентакме, заболонная древесина шореи всех видов, парашорея, шорея фагуцина.

2. For the goods of heading 4407:

- the humidity index is determined in accordance with ISO 4470-81 (GOST 16588-91) and (or) national standards, as well as certified and other methods (methods) of measurements that meet the requirements of the legislation of the member states of the Eurasian Economic Union in the field of ensuring uniformity of measurements;

the thickness is determined in millimeters at any place of the length of the timber, but not closer than 150 mm from the end;

The width is defined in millimeters:

in trimmed with parallel edges - in any place of the length of the timber, where there is no obsol, but not closer than 150 mm from the end;

in uncircumcised, unilaterally trimmed - in the middle of the length of the timber as a half-sum of the widths of both strata (excluding bark and club), and fractions up to 5 mm are not taken into account, fractions of 5 mm or more are considered for 10 mm;

in trimmed with non-parallel edges - in the middle of the length of the timber on a formation that does not contain obsol.