4418 11 — Изделия столярные и плотницкие, деревянные, строительные, включая ячеистые деревянные панели, панели напольные собранные, гонт и дранку кровельные: окна, балконные двери и их рамы: из древесины тропических пород

4418 Builders' joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes (+): 4418 10 – Windows, French-windows and their frames 4418 20 – Doors and their frames and thresholds

4418 40 – Shuttering for concrete constructional work 4418 50 – Shingles and shakes 4418 60 – Posts and beams – Assembled flooring panels: 4418 73 – – Of bamboo or with at least the top layer (wear layer) of bamboo 4418 74 – – Other, for mosaic floors 4418 75 – – Other, multilayer 4418 79 – – Other – Other: 4418 91 – – Of bamboo 4418 99 – – Other

This heading covers woodwork, including articles of wood marquetry or inlaid wood, used in the construction of any kind of building, etc., in the form of assembled goods or as recognisable unassembled pieces (for example, prepared with tenons, mortises, dovetails or other similar joints for assembly), whether or not with their metal fittings such as hinges, locks, etc. Goods of this heading may be of ordinary wood or of particle board or similar board, fibreboard, laminated wood or densified wood (see Note 3 to this Chapter). The term "joinery" applies more particularly to builders' fittings (such as doors, windows, shutters, stairs, door or window frames), whereas the term "carpentry" refers to woodwork (such as beams, rafters and roof struts) used for structural purposes or in supports, scaffolding, etc., and includes assembled shuttering for concrete constructional work. However, plywood panels, even if surface-treated for use as concrete shuttering, are classified in heading 4412. Builders' carpentry also includes glue-laminated timber, i.e., structural timber obtained by gluing together several layers of wood, the grain of which should be essentially parallel. In curved members the layers are arranged so that the applied load is perpendicular to the plane of each layer; the layers of a straight glue-laminated beam lie in parallel planes. The heading also covers cellular wood panels, which resemble in appearance the blockboard and battenboard described in the Explanatory Note to heading 4412, but in which the blocks or battens forming the core are spaced at intervals and arranged either parallel or in a lattice. In some cases the panels may consist of facing sheets separated by an internal frame running along the edges only. The spaces between them may be filled with sound-insulating or heat-insulating materials (for example, cork, glass wool, wood pulp, asbestos). The facing sheets may be of wood, particle board or similar board, fibreboard or plywood, and the panels (like those of heading 4412) may be faced with base metal. Panels of this kind are relatively light,

but strong, and are used for the manufacture of partitions, doors and sometimes furniture. The heading also covers solid blocks, strips, friezes, etc., assembled into flooring panels (including parquet panels) or tiles, whether or not bordered. The heading further covers flooring panels or tiles consisting of blocks, strips, friezes, etc., assembled on a support of one or more layers of wood, known as "multilayer" parquet flooring panels. The top layer (wear layer) is usually made of two or more rows of strips making up the panel. These panels or tiles may be tongued and grooved at the ends to facilitate assembly. Roofing shingles are wood sawn lengthwise, usually more than 5 mm thick at one end (the butt) and less than 5 mm thick at the other end (the tip). Shingles may be sawn so that their edges are parallel; the butt may be sawn at right angles to the edges or be rounded or of another shape. One of the faces may be sanded along its full length from butt to tip or have grooves cut along its full length as well. Roofing shakes are wood obtained by splitting short pulpwood logs or bolts by hand or by machine. As a result of splitting, the natural grain of the wood becomes visible on the faces of the shakes. Shakes are sometimes sawn lengthwise through their thickness to obtain two shakes, each having one face formed by splitting and the other by sawing. The heading does not cover: (a) plywood panels, veneered panels or similar laminated wood panels used as flooring panels, to the surface of which a thin layer of veneer has been fixed so that they imitate an assembled flooring panel of heading 4418 (heading 4412); (b) wall cupboards, with or without a back, even if designed to be nailed or otherwise fixed to the ceiling or wall (heading 9403); (c) prefabricated buildings (heading 9406). Subheading Explanatory Note. Subheading 4418 74 Assembled flooring panels for mosaic floors are prefabricated panels which consist of a number of individual square or rectangular elements and may include "cabochons" (small square, rectangular, triangular, lozenge-shaped or otherwise shaped wooden pieces used as fillers to achieve the desired pattern). The strips are laid according to a certain pattern, for example, chequered, basket-weave or herringbone (see the examples below).

Pattern of "cage" Pattern of "tree" Pattern of "tree"

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) wood in the form of chips, chips, sawdust or powder used principally in perfumery, pharmacy or for insecticidal, fungicidal or similar purposes (heading 1211);

(b) bamboo or other woody materials principally used for weaving, untreated, split or unsplit, not sawn or sawn along or cut or cut in length (heading 1401);

(c) wood in the form of chips, chips, sawdust or powder used principally for dyeing or tanning (heading 1404);

(d) activated charcoal (heading 3802);

(e) articles of heading 4202;

(f) goods of Chapter 46;

(g) Shoes or parts thereof of Chapter 64;

(h) goods of Chapter 66 (e.g. umbrellas, canes and parts thereof);

(ij) the goods of heading 6808;

(k) jewelry of heading 7117;

(l) goods of Section XVI or XVII (e.g. parts of machinery, casings, lids, machinery and apparatus and articles of master coachmen);

(m) goods of Title XVIII (e.g. watch cases, musical instruments and parts thereof);

(n) parts of firearms (heading 9305);

(o) articles of Chapter 94 (e.g. furniture, fixtures and lighting equipment, prefabricated constructions);

(p) Articles of Chapter 95 (e.g. toys, games, sports equipment);

(q) articles of Chapter 96 (e.g., pipes and parts thereof, buttons, pencils, monopores, bipeds, tripods and the like), with the exception of wooden housings and pens for articles of heading 9603; or

(r) Articles of Chapter 97 (e.g. works of art).

2. In this chapter, the term “pressed wood” means wood that has undergone chemical or physical treatment (when the layers are joined together, the treatment must be greater than necessary for simple bonding of the layers), resulting in increased density or hardness together with improved mechanical strength or resistance to chemical or electrical effects.

3. Headings 4414 to 4421 cover articles of the corresponding description of chipboards or similar boards, fibreboards, layered or pressed wood, similar to wood products.

4. The articles of heading 4410, 4411 or 4412 may be given the profile characteristic of the articles of heading 4409 and may be curved, corrugated, perforated, cut or shaped in a different shape than square or rectangular, or subjected to any other treatment, provided that this does not give them the properties of the articles of other headings.

5. Heading 4417 does not include tools whose blade, working edge, working surface or other working part is made of any of the materials listed in note 1 to Chapter 82.

6. Subject to the provisions of Note 1 above, and unless the context otherwise requires, the term “wood” in the headings of this Chapter also applies to bamboo and other woody materials.

Subheading notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. For the purposes of subheading 4401 31, the expression ‘wood pellets’ means by-products, such as cutter shavings, sawdust or chips, of the mechanical wood-processing industry, furniture-making industry or other wood-transformation activities, which have been agglomerated either directly by compression or by the addition of a binder in a proportion not exceeding 3 % by weight. Such pellets are cylindrical, with a diameter not exceeding 25 mm and a length not exceeding 100 mm.

2. For the purposes of subheading 4401 32, the expression ‘wood briquettes’ means by-products such as cutter shavings, sawdust or chips, of the mechanical wood processing industry, furniture making or other wood transformation activities, which have been agglomerated either directly by compression or by addition of a binder in a proportion not exceeding 3 % by weight. Such briquettes are in the form of cubiform, polyhedral or cylindrical units with the minimum cross-sectional dimension greater than 25 mm.

3. For the purposes of subheading 4407 13, ‘S-P-F’ refers to wood sourced from mixed stands of spruce, pine and fir where the proportion of each species varies and is unknown.

4. For the purposes of subheading 4407 14, ‘Hem-fir’ refers to wood sourced from mixed stands of Western hemlock and fir where the proportion of each species varies and is unknown.

Additional notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of heading 4405, the term “wood flour” means wood powder not more than 8 wt.% of which is retained on a sieve with holes of 0.63 mm.

2. В подсубпозициях 4418 11 100 0, 4418 21 100 0 и 4420 90 910 0 термин «древесина тропических пород» означает древесину следующих пород: аукумея Клайна, триплохитон твердосмольный, энтандрофрагма цилиндрическая, энтандрофрагма полезная, кайя иворензис, мимузопс Геккеля, хлорофора высокая, или африканское тиковое дерево, энтандрофрагма ангольская, мансония высокая, иломба, или пикнантус анголезский, ловоа (виды), терминалия пышная, лофира крылатая, шорея с темно-красной древесиной, шорея с бледно-красной древесиной, шорея бакау, древесина различных видов шореи, парашореи, пентакме, заболонная древесина шореи всех видов, парашорея, шорея фагуцина и другие виды шореи, фрагрэа душистая, двукрылоплодник, гонистилюс Варбурга, дриабаланопс ароматный, или камфорное дерево, тик, jongkong, интсия Бейкера, диера тонкоребристая, коомпассия, вирола суринамская, махогониевое, или красное дерево (Swietenia spp.), феба пористая, бальза, палисандр Рио, палисандр Пара и бразильское розовое дерево.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. В подсубпозициях 4403 49 950 2, 4407 29 150 2, 4407 29 830 1, 4407 29 850 1, 4407 29 950 1, 4408 39 550 1, 4408 39 550 5, 4408 39 550 8, 4408 39 700 1, 4408 39 850 1, 4408 39 850 5, 4408 39 850 8, 4408 39 950 1, 4408 39 950 5, 4408 39 950 8, 4412 10 000 1, 4412 10 000 4, 4412 31 900 1, 4412 41 000 1, 4412 51 000 1, 4412 91 000 1 термин «древесина тропических пород» означает древесину следующих пород: митрагина прилистниковая, кайя иворензис, афрормозия (виды), брахистегия (виды), фрагрэа душистая, карапа гвианская, или крабовое дерево, aningre, туррэантус африканский, лофира крылатая, balau, бальза, гварея пахучая с бледно-розовой древесиной, гварея пахучая с розовато-коричневой древесиной, приория копаифера, цедрела (виды), пиптадения африканская, шорея (виды), ловоа (виды), афзелия, терминалия иворенская, кордия Гоэлда, сырное дерево, fuma, кратоксилон древовидный, иломба, или пикнантус анголезский, феба пористая, паратекома, хлорофора высокая, или африканское тиковое дерево, бразильский копал, диера тонкоребристая, кариниана легалис, jongkong, дриабаланопс ароматный, или камфорное дерево, коомпассия, двукрылоплодник (виды), энтандрофрагма Кандолля, цистантера макоцветная, koto, шорея с бледно-красной древесиной, терминалия пышная, кордия (виды), плантимисциум (виды), махогониевое, или красное дерево, мимузопс Геккеля, квалеа (один из видов), мансония высокая, тарриетия (виды), шорея бакау, хопея (виды), интсия Бейкера, merpauh, анизоптера (виды), moabi, тарриетия полезная, триплохитон твердосмольный, аукумея Клайна, onzabili, orey, ovengkol, озиго, или пахилобус бутнеров, птерокарпус гибонский, драконтомелум дао, палисандр Гватемала, палисандр Пара, палисандр Рио, бразильское розовое дерево, эуксилофора парэнзис, pau marfim, альстония конгензис, тетрамериста оголенная, вохизия гондурасская, гонистилюс Варбурга, энтандрофрагма цилиндрическая, бомбакопсис, псевдосиндора болотная, энтандрофрагма полезная, sucupira, suren, tauari, тик, энтандрофрагма ангольская, госсвейлеродендрон бальзамный, вирола суринамская, древесина различных видов шореи, парашореи и пентакме, заболонная древесина шореи всех видов, парашорея, шорея фагуцина.

2. For the goods of heading 4407:

- the humidity index is determined in accordance with ISO 4470-81 (GOST 16588-91) and (or) national standards, as well as certified and other methods (methods) of measurements that meet the requirements of the legislation of the member states of the Eurasian Economic Union in the field of ensuring uniformity of measurements;

the thickness is determined in millimeters at any place of the length of the timber, but not closer than 150 mm from the end;

The width is defined in millimeters:

in trimmed with parallel edges - in any place of the length of the timber, where there is no obsol, but not closer than 150 mm from the end;

in uncircumcised, unilaterally trimmed - in the middle of the length of the timber as a half-sum of the widths of both strata (excluding bark and club), and fractions up to 5 mm are not taken into account, fractions of 5 mm or more are considered for 10 mm;

in trimmed with non-parallel edges - in the middle of the length of the timber on a formation that does not contain obsol.