EAEU HS code

7308 90 980 9 — Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel: other: other: other

Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel: other: other: other

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

Duty rate

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit

Not applicable

Requirements and measures

Veterinary and sanitary control1
Conformity assessment8

None: russian bans and restrictions, dual use, EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT

22%

The general import rate in Russia: Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025). This code is not named on the 10% VAT list (Decree No. 908) or the exemption list (No. 1042). The list of medical goods No. 688 is not checked here.

Where it sits in the nomenclature

Section XV. Base metals and articles of base metal

73Articles of iron or steel
7308Structures and parts of structures "e.g., bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, roofing frameworks, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns", of iron or steel; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of iron or steel (excl. prefabricated buildings of heading 9406)
7308 90Structures and parts of structures, of iron or steel, n.e.s. (excl. bridges and bridge-sections, towers and lattice masts, doors and windows and their frames, thresholds for doors, props and similar equipment for scaffolding, shuttering, propping or pit-propping)
7308 90 98Other: other
7308 90 980 9you are here

Compare the description of your goods with the neighbouring codes on the subheading line above.

Explanatory notes to heading 7308 3 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

7308 Structures (excluding prefabricated buildings of heading 9406) and parts of structures (for example, bridges and bridge-sections, lock-gates, towers, lattice masts, roofs, building trusses, doors and windows and their frames and thresholds for doors, shutters, balustrades, pillars and columns), of iron or steel; plates, rods, angles, shapes, tubes and the like, of iron or steel, prepared for use in structures (+): 7308 10 – bridges and bridge-sections 7308 20 – towers and lattice masts 7308 30 – doors, windows and their frames and thresholds for doors 7308 40 – equipment for metal scaffolding, shuttering, retaining walls or pit-propping

7308 90 – other This heading covers assembled or unassembled metal structures, as well as parts thereof. For the purposes of this heading, these structures are characterised by the fact that once they are put in position, they generally remain in that position. They are usually made up from rectangular and round bars, rods, tubes, angles, shapes, sheets and plates, hoop, strip, forgings or castings, by riveting, bolting, welding, etc. Such structures sometimes incorporate products of other headings, such as wire mesh or expanded metal sheets of heading 7314. Parts of structures include clamps and other devices specially designed for assembling metal structural elements of round cross-section (tubular or other). These devices usually have protuberances with tapped holes into which, at the time of assembly, screws are inserted to fix the clamps to the tubes. Apart from the structures and parts of structures mentioned in the heading, the heading also covers such articles as: pit head frames and superstructures; adjustable or telescopic props, tubular props, extensible coffering beams, tubular scaffolding and similar equipment; sluice gates, piers, breakwaters and moles; lighthouse superstructures; masts, gangways, rails, bulkheads, etc., for ships; balconies and verandahs; shutters, gates, sliding doors; assembled railings or balustrade fencing; level-crossing gates and similar barriers; frameworks for greenhouses and hot-frames; large-scale shelving for assembly and permanent installation in shops, workshops, storehouses, etc.; counters and stands; certain protective crash barriers for motorways, made of sheet metal, angles or shapes. The heading also covers such parts as flat-rolled products, "wide flats", including so-called universal plates, strip, angles, rods, shapes and tubes, which have been subjected to preparatory operations (e.g., drilled, bent or notched) for use in structures. In addition, the heading covers products consisting of individual rolled bars twisted together, which are also used for reinforcing or prestressing concrete. The heading excludes: (a) Assembled sheet piling (heading 7301). (b) Coffering panels for concrete work, having the character of moulds (heading 8480). (c) Structures clearly identifiable as parts of machinery (Section XVI). (d) Structures of Section XVII, such as railway or tramway track fixtures and fittings and mechanical signalling equipment of heading 8608; chassis frames of railway rolling-stock, etc., or of vehicles (Chapter 86 or 87) and floating structures of Chapter 89. (e) Mobile shelving (heading 9403).

Explanation of the subheading. Subheading 7308 30 This subheading also covers steel doors for all types of dwellings.

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 73 — Articles of iron or steel 3 items

Notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72.

2. In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

Additional note

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. Drilling pipes are used for descent into a borehole and lifting a rock-destroying tool, transferring rotation, creating an axial load on the tool, supplying a washing fluid or compressed air to the bottom. There are ordinary, weighted and leading drill pipes.

Ordinary drill pipes (heading 7304) - usually one-piece round cross-section, are connected by means of drill locks or semi-locks with special large conical threads.

Weighted drill pipes (heading 8431) are usually round or square cross-sections with an increased wall thickness; they are also connected by thread and serve to increase the stiffness of the lower part of the column and to place a load on the rock-destroying tool.

Leading drill pipes (heading 8431) - multifaceted cross-section, are placed at the top of the column of drill pipes and transmit it rotation from the rotator of the drilling rig.

Classification rulings for this code (31)

Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.

The flange is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for mounting bolts around the circumference, is designed to fasten the segments of the steel tower of a wind power plant to each other.

Full description

To bring the lower flange of the second segment into a complete form is connected by welding with the main body of the second segment of the tower (this delivery is not included), the welding sites are grinded, polished, cleaned, then an anti-corrosion coating is applied to them, then the segments of the steel tower are mated with each other using a bolt connection.

The main characteristics of the flange: an external diameter of 5000 mm, an internal diameter of 4439 mm, a diameter of holes for fastening bolts around the circle - 68 mm, the number of bolts - 108 pieces (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - a single ring forging followed by hardening.

GRI 1 and 6

Full description

To bring the lower flange of the upper segment into a finished form is connected by welding with the main body of the fourth segment of the tower (this delivery is not included), the welding sites are polished, polished, cleaned, then an anti-corrosion coating is applied to them, then the segments of the steel tower are mated with each other using a bolt connection.

The main characteristics of the flange: external diameter - 4700 mm, internal diameter - 4346 mm, the diameter of the holes for fastening bolts around the circle - 52 mm, the number of bolts - 116 pieces (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - solid ring forging with subsequent hardening.

GRI 1 and 6

Full description

To bring the bottom flange of the third segment into its final form is connected by welding with the main body of the third segment of the tower (this delivery is not included), the welding sites are polished, polished, cleaned, then an anti-corrosion coating is applied to them, then the segments of the steel tower are mated with each other using a bolt connection.

The main characteristics of the flange: an external diameter of 5000 mm, an internal diameter of 4533 mm, a diameter of holes for fastening bolts around the circle - 52 mm, the number of bolts - 116 pieces (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - a single ring forging with subsequent hardening.

GRI 1 and 6

Full description

To bring the upper flange of the second segment into a complete form is connected by welding with the main body of the second segment of the tower (this delivery is not included), the welding sites are sanded, polished, cleaned, then an anti-corrosion coating is applied to them, then the segments of the steel tower are mated with each other using a bolt connection.

The main characteristics of the flange: an external diameter of 5000 mm, an internal diameter of 4533 mm, the diameter of the holes for fastening bolts around the circle - 60 mm, the number of bolts - 116 pieces (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - a single ring forging with subsequent hardening.

GRI 1 and 6

Full description

To bring the bottom flange of the first segment into a complete form, the welding method is connected to the main body of the first segment of the tower (this delivery is not included), the welding places are sanded, polished, cleaned, then an anti-corrosion coating is applied to them, then the flange of the tower is connected to the anchor basket of the tower using a bolt connection.

The main characteristics of the flange: an external diameter of 5298 mm, an internal diameter of 4592 mm, the diameter of the holes for fastening bolts around the circle - 48 mm, the number of bolts - 116 pieces (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - solid ring forging with subsequent hardening.

GRI 1 and 6

Full description

To bring the upper flange of the first segment into a complete form is connected by welding with the main body of the first segment of the tower (this delivery is not included), the welding sites are sanded, polished, cleaned, then an anti-corrosion coating is applied to them, then the segments of the steel tower are mated with each other using a bolt connection.

GRI 1 and 6

Full description

To bring the upper flange of the fourth segment into a finished form is connected by welding with the main body of the fourth segment of the tower (this delivery is not included), the welding sites are polished, polished, cleaned, then an anti-corrosion coating is applied to them, then the segments of the steel tower are mated with each other using a bolt connection.

The main characteristics of the flange: an external diameter of 4700 mm, an internal diameter of 4346 mm, the diameter of the holes for fastening bolts around the circle - 52 mm, the number of bolts - 116 pieces (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - solid ring forging with subsequent hardening.

GRI 1 and 6

Full description

To bring the upper flange of the third segment into a complete form is connected by welding with the main body of the third segment of the tower (this delivery is not included), the welding sites are sanded, polished, cleaned, then an anti-corrosion coating is applied to them, then the segments of the steel tower are mated with each other using a bolt connection.

The main characteristics of the flange: an external diameter of 5000 mm, an internal diameter of 4606 mm, a diameter of holes for fastening bolts around the circle - 60 mm, the number of bolts - 116 pieces (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - a single ring forging with subsequent hardening.

GRI 1 and 6

Full description

To bring the lower flange of the upper segment into a finished form is connected by welding with the main body of the upper segment of the tower (this delivery is not included), the welding sites are grinded, polished, cleaned, then an anti-corrosion coating is applied to them, then the segments of the steel tower are mated with each other using a bolt connection.

The main characteristics of the flange: an external diameter of 3878 mm, an internal diameter of 3498 mm, a diameter of holes for fastening bolts around the circle - 39 mm, the number of bolts - 140 (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - a single ring forging with subsequent hardening.

GRI 1 and 6

Full description

To bring the lower flange of the fourth segment into a complete form, the welding method is connected to the main body of the fourth segment of the tower (this delivery is not included), the welding sites are polished, polished, cleaned, then an anti-corrosion coating is applied to them, then the segments of the steel tower are mated with each other using a bolt connection.

GRI 1 and 6

The flange is designed to fasten the segments of the steel tower of a wind power plant to each other.

Full description

It is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for fastening bolts around the circle. To bring the flange to the finished form, the flange is welded to the segment of the turret body (this delivery is not included), the welding sites are grinded, polished, cleaned, then an anti-corrosion coating is applied to them, then the segments of the steel tower are mated with each other using a bolt connection.

The main characteristics of the flange: external diameter 5000 mm, internal diameter 4490 mm, fabrication material - low-alloy steel , manufacturing methods - solid ring forging, hardening, stamping, welding.

GRI 1 and 6

The flange is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for fastening bolts around the circle.

Full description

It is designed to fasten the segments of the steel tower of the wind power plant to each other. To bring the flange to the finished form, the flange is welded to the segment of the turret body (this delivery is not included), the welding sites are grinded, polished, cleaned, then an anti-corrosion coating is applied to them, then the segments of the steel tower are mated with each other using a bolt connection.

The main characteristics of the flange: the fabrication material is low-alloy steel, an external diameter of 5000 mm, an internal diameter of 4672 mm, the diameter of the holes for fastening bolts around the circle is 45 mm, the number of bolts for fastening is 120 pcs (this delivery is not included). The method of making the flange is a single ring forging with subsequent hardening.

Packed in film.

GRI 1 and 6

Full description

The main characteristics of the flange: an external diameter of 5000 mm, an internal diameter of 4479 mm, a diameter of holes for fastening bolts around the circle - 68 mm, the number of bolts - 108 pieces (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - a single ring forging with subsequent hardening.

GRI 1 and 6

Full description

The main characteristics of the flange: external diameter - 4700 mm, internal diameter - 4371 mm, the diameter of the holes for fastening bolts around the circle - 45 mm, the number of bolts - 120 pcs. (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - solid ring forging with subsequent hardening.

GRI 1 and 6

The flange is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for fastening bolts around the circle.

Full description

The main characteristics of the flange: the fabrication material is low-alloy steel, an external diameter of 5000 mm, an internal diameter of 4375 mm, the diameter of the holes for fastening bolts around the circle is 68 mm, the number of bolts for fastening is 108 pieces (this delivery is not included). The method of making the flange is a single ring forging with subsequent hardening.

Packed in film.

GRI 1 and 6

Full description

The main characteristics of the flange: an external diameter of 5000 mm, an internal diameter of 4558 mm, the diameter of the holes for fastening bolts around the circle - 60 mm, the number of bolts - 116 pieces (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - a single ring forging with subsequent hardening.

GRI 1 and 6

Full description

The main characteristics of the flange: an external diameter of 4700 mm, an internal diameter of 4371 mm, a diameter of holes for fastening bolts around the circle - 45 mm, the number of bolts - 120 pcs. (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - a single ring forging with subsequent hardening.

GRI 1 and 6

The flange is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for fastening bolts around the circle.

Full description

It is designed to fasten the segments of the steel tower of the wind power plant to each other. To bring the flange to the finished form, the flange is welded to the segment of the tower body (this delivery is not included), the welding places are grinded, polished, cleaned, then an anti-corrosion coating is applied to them, then the flange is connected with bolts to the base of the wind turbine gondola frame.

The main characteristics of the flange: the fabrication material is low-alloy steel, an external diameter of 3878 mm, an internal diameter of 3498 mm, the diameter of the holes for fastening bolts around the circle is 39 mm, the number of bolts for fastening is 140 pieces (this delivery is not included). The method of making the flange is a single ring forging with subsequent hardening.

Packed in film.

GRI 1 and 6

Full description

The main characteristics of the flange: an external diameter of 5298 mm, an internal diameter of 4594 mm, the diameter of the holes for fastening bolts around the circle - 48 mm, the number of bolts - 104 pieces (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - solid ring forging with subsequent hardening.

GRI 1 and 6

The flange is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for fastening bolts around the circle.

Full description

The main characteristics of the flange: the fabrication material is low-alloy steel, an external diameter of 5000 mm, an internal diameter of 4589 mm, the diameter of the holes for fastening bolts around the circle is 52 mm, the number of bolts for fastening is 120 pcs (this delivery is not included). The method of making the flange is a single ring forging with subsequent hardening.

Packed in film.

GRI 1 and 6

The flange is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for fastening bolts around the circle.

Full description

It is designed to fasten the segments of the steel tower of the wind power plant to each other. To bring the flange to the finished form, the flange is welded to the segment of the tower body (this delivery is not included), the welding places are grinded, polished, cleaned, then an anti-corrosion coating is applied to them, then the flange of the tower is connected to the anchor basket of the tower using a bolt connection.

The main characteristics of the flange: the fabrication material is low-alloy steel, an external diameter of 5298 mm, an internal diameter of 4572 mm, the diameter of the holes for fastening bolts around the circle is 48 mm, the number of bolts for fastening is 112 pieces (this delivery is not included). The method of making the flange is a single ring forging with subsequent hardening.

Packed in film.

GRI 1 and 6

Full description

GRI 1 and 6

Full description

The main characteristics of the flange: an external diameter of 5000 mm, an internal diameter of 4621 mm, the diameter of the holes for fastening bolts around the circle - 52 mm, the number of bolts - 120 pcs. (not included in the kit), the fabrication material - low-alloy steel, manufacturing methods - one-piece ring forging with subsequent hardening.

GRI 1 and 6

The flange is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for fastening bolts around the circle.

Full description

The main characteristics of the flange: the material of manufacture is low-alloy steel, an external diameter of 5000 mm, an internal diameter of 4471 mm, the diameter of the holes for fastening bolts around the circle is 60 mm, the number of bolts for fastening is 116 pcs (this delivery does not include). The method of making the flange is a single ring forging with subsequent hardening.

Packed in film.

GRI 1 and 6

The flange is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for fastening bolts around the circle.

Full description

Packed in film.

GRI 1 and 6

The flange is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for fastening bolts around the circle.

Full description

Packed in film.

GRI 1 and 6

Full description

GRI 1 and 6

Full description

GRI 1 and 6

The flange is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for fastening bolts around the circle.

Full description

Packed in film.

GRI 1 and 6

Full description

GRI 1 and 6

The flange is a ring that has a groove for installing conjugated elements, a side on the outer edge, holes for fastening bolts around the circle.

Full description

The main characteristics of the flange: the fabrication material is low-alloy steel, an external diameter of 5000 mm, an internal diameter of 4471 mm, the diameter of the holes for fastening bolts around the circle is 60 mm, the number of bolts for fastening is 116 pieces (this delivery is not included). The method of making the flange is a single ring forging with subsequent hardening.

Packed in film.

GRI 1 and 6

What import requires

Veterinary and sanitary control

Goods fall under supervision by their type and characteristics

Sanitary and epidemiological supervision (control)
rule for the whole chapter 73
Материалы, изделия и оборудование, контактирующие с пищевыми продуктами; Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры
Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

Постановление № 2425Единый перечень продукции: сертификация и декларирование в РФ
- Средства индивидуальной защиты (бронеодежда) — certificate of conformity (part of the heading) · ГОСТ 34286-2017
- Листы металлические профилированные кровельные с полимерным покрытием (металлочерепица) — certificate of conformity (part of the heading) · ГОСТ Р 58153-2018
ТР ТС 002/2011Safety of high-speed rail transport
- Металлические стойки для опор контактной сети электрифицированных железных дорог — certificate of conformity
- Ригели жестких поперечин устройств подвески контактной сети электрифицированных железных дорог — certificate of conformity
ТР ТС 003/2011Safety of railway transport infrastructure
- Металлические стойки для опор контактной сети электрифицированных железных дорог — certificate of conformity
- Ригели жестких поперечин устройств подвески контактной сети электрифицированных железных дорог — certificate of conformity
ТР ЕАЭС 043/2017About requirements to means of ensuring fire safety and fire extinguishing
- Воздуховоды — certificate of conformity
ТР ЕАЭС 050/2021About safety of products intended for civil defense and protection from emergency situations of natural and man-made character
- металлоконструкции временных наплавных мостов — certificate of conformity

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

Payments on import

Duty for this code: 6%. On top of the duty, on import into Russia you pay VAT of 22% of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

Import VAT in EAEU countries

Russia22%Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025)
Kazakhstan16%Tax Code of Kazakhstan, Art. 503(1), from 01.01.2026
Belarus20%Tax Code of Belarus, Art. 122
Armenia20%Tax Code of the Republic of Armenia
Kyrgyzstan12%Tax Code of the Kyrgyz Republic

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

Calculate the whole deal →Quick payment estimate →

OKPD2 code

The match is set for the whole subheading, by the first six digits of the code

24.33.30 — Панели многослойные из листового стального плакированного проката
25.11.23 — Конструкции и детали конструкций прочие, листы, прутки, уголки, профили и аналогичные изделия из черных металлов или алюминия

Correspondence keys of the Russian Ministry of Economic Development, edition of 20.07.2023. The ministry’s caveat: Ключи отражают возможные соответствия между кодами на уровне первых шести знаков ТН ВЭД ЕАЭС (основанной на ГС) и кодами ОКПД 2 (основанного на КПЕС) по состоянию на 1 января 2022 года. Предлагаемые соответствия не являются исчерпывающими и предназначены для использования в качестве вспомогательного материала для облегчения работы по установлению возможных вариантов корреляции кодов классификаторов в отношении соответствующих категорий товаров.

Настоящие переходные ключи (сопоставительные таблицы) разработаны на основе данных агентства Евростат Комиссии Европейского союза по корреляции кодов Гармонизированной системы описания и кодирования товаров (ГС) 2022 года и Статистической классификации продукции по видам экономической деятельности в Европейском союзе (КПЕС) 2008 года. Ключи отражают возможные соответствия между кодами на уровне первых шести знаков ТН ВЭД ЕАЭС (основанной на ГС) и кодами ОКПД 2 (основанного на КПЕС) по состоянию на 1 января 2022 года. Предлагаемые соответствия не являются исчерпывающими и предназначены для использования в качестве вспомогательного материала для облегчения работы по установлению возможных вариантов корреляции кодов классификаторов в отношении соответствующих категорий товаров. Услуги не являются объектом классификации в ТН ВЭД ЕАЭС и не включены в переходные ключи. По мере внесения изменений в ОКПД 2 и ТН ВЭД ЕАЭС переходные ключи при необходимости подлежат актуализации.

The right code is in the HS code search.