7419 80 — Изделия из меди прочие: прочие

7419 Other copper products (+): 7419 10 - chains and parts thereof - other: 7419 91 - cast, shaped, stamped or forged, but not subjected to further processing 7419 99 - other

This heading covers all articles of copper other than those covered by the preceding headings of this Chapter or by Note 1 to Section XV, by Chapter 82 or 83, or by any other heading of the Nomenclature. The heading includes, inter alia: (1) Safety pins and other pins (other than hat pins and other ornamental pins and drawing pins) of copper, not elsewhere specified or included. (2) Reservoirs, tanks, vats and similar containers of copper, for the storage and transport of any material, of any capacity, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment (see the Explanatory Notes to headings 7309 and 7310). (3) Containers for compressed or liquefied gas (see the Explanatory Note to heading 7311). (4) Chain and parts thereof, of copper (see the Explanatory Note to heading 7315), other than chain having the character of imitation jewellery (e.g., watch chains and other chains) (heading 7117). (5) Articles of copper of the kinds listed in the Explanatory Notes to headings 7325 and 7326. (6) Anodes for electroplating, of copper or of copper alloys (e.g., brass) (see Part (A) of the Explanatory Note to heading 7508). (7) Tubes and pipes to which ribs or fins are attached, e.g., by welding, not elsewhere specified or included. (8) Cloth, grill and netting of copper wire and expanded metal of copper. (9) Springs, other than clock or watch springs of heading 9114. The heading excludes:

(a) fabric of metallic thread used in clothing, as furniture fabric or for similar purposes (heading 5809); (b) finished metal plates of wire mesh used for soldering (heading 8311); (c) wire fabric used in hand sieves or lattices (heading 9604).

Explanation of the subheading. Subheading 7419 91 Explanations to subheadings 7326 11 and 7326 19 apply, mutatis mutandis, to this subheading. In the case of cast or molded articles, traces of the tile may be removed.

Note

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. The terms used in this chapter mean:

(a) “refined copper” means a metal containing not less than 99.85 % by weight of copper or a metal containing not less than 97.5 % by weight of copper, provided that the content by weight of each other element does not exceed the limits specified in the following table:

Other elements

Element

Maximum content, wt.%

Ag

silver

0.25

As

arsenic

0.5

Cd

cadmium

1.3

Cr

chromium

1.4

Mg

magnesium

0.8

Pb

lead

1.5

S

sulfur

0.7

Sn

tin

0.8

Te

tellurium

0.8

Zn

zinc

1.0

Zr

zirconium

0.3

Other elements* (each of them)

0.3

* Other elements include, for example, Al, Be, Co, Fe, Mn, Ni, Si

(b) "copper alloys" means metal alloys, other than unrefined copper, in which copper is greater in mass than any other element, provided that:

(i) the mass content of at least one of the other elements exceeds the limit indicated in the above table; or

(ii) the total content of other elements exceeds 2.5 % by weight.

(c) "ligatures" means alloys containing, among other elements, more than 10 % by weight of copper, not suitable for deformation in the cold state and used mainly as additives in the manufacture of other alloys or as oxidants, desulphurators or for other similar purposes in non-ferrous metallurgy. However, copper phosphide (copper phosphorus) containing more than 15 % by weight of phosphorus is classified in heading 2853.

Subheading notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. The terms used in this group have the following meanings:

(a) “copper and zinc (brass)-based alloys” means alloys of copper and zinc, whether or not containing other elements. If other elements are present, then:

zinc by weight must exceed each of these other elements.

- in the presence of nickel, its content should not exceed 5 wt.% (see copper-nickel-zinc alloys (neusilbers)); and

- in the presence of tin, its content should not exceed 3 wt.% (see copper-tin alloys (bronzes)).

(b) “alloys based on copper and tin (bronze)” means alloys of copper and tin containing or not containing other elements. In the presence of other elements, the tin content by weight exceeds the content by weight of each of these elements, except when the content of tin 3 wt.% or more zinc content by weight may exceed the content by weight of tin, but it should be less than 10 wt.%.

(c) "alloys based on copper, nickel and zinc (neusilbers)" means alloys of copper, nickel and zinc, whether or not containing other elements. The nickel content is 5 wt.% or more (see copper-zinc alloys (brass)).

(d) “copper and nickel-based alloys” means alloys of copper and nickel containing or not containing other elements, but in any case with a content not exceeding 1% by weight of zinc. In the presence of other elements, the nickel content by weight exceeds the content by weight of each of these elements.