8421 99 000 6 — Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases: parts: other: other: other

8421 Centrifuges, including centrifugal dryers; filtering or purifying machinery and apparatus, for liquids or gases: – Centrifuges, including centrifugal dryers: 8421 11 – – Cream separators 8421 12 – – Clothes-dryers 8421 19 – – Other – Filtering or purifying machinery and apparatus for liquids: 8421 21 – – For filtering or purifying water 8421 22 – – For filtering or purifying beverages other than water 8421 23 – – Oil or petrol-filters for internal combustion engines 8421 29 – – Other – Filtering or purifying machinery and apparatus for gases: 8421 31 – – Intake air filters for internal combustion engines 8421 39 – – Other – Parts: 8421 91 – – Of centrifuges, including centrifugal dryers 8421 99 – – Other

This heading covers: (I) Machines employing centrifugal force to separate substances in whole or in part by reason of their different densities, and machinery designed to remove moisture from wet materials. (ii) Units and equipment for filtering or purifying liquids or gases, other than, for example, filter funnels, milk filter nets, paint filter nets (usually Chapter 73). (I) CENTRAFUGES, INCLUDING CENTROPIGN DRIES Most of these units consist mainly of a perforated plate, drum, basket or chamber, etc., rotating with high frequency in a fixed housing, usually cylindrical. Centrifugal force presses the materials placed inside the drum against its walls. In some types of centrifuges, substances of different densities are collected at different levels using a series of dividing cones. In other types, the solids remain in the rotating perforated drum, basket, etc., and the liquid stains are removed. Devices of the latter type can also be used to impregnate materials with liquids (for example, during painting or cleaning). This heading covers (1) Centrifugal dryers for laundry, dyeing workshops, pulp and paper machines, mills, etc.

(2) Sugar-refining centrifuges. (3) Cream separators and centrifugal milk clarifiers. (4) Centrifuges for purifying oils, wines, spirits, etc. (5) Centrifuges for dewatering or dewaxing petroleum products. (6) Centrifuges for dehydrating wines, animal fats, starch, etc. (7) Centrifuges for the manufacture of nitrocellulose. (8) Separators for yeast cultures. (9) Centrifuges for the chemical industry (e.g., high-speed extractors for antibiotics). (10) Centrifuges used mainly in laboratories, in which the liquids separate into upper layers, enabling them to be decanted. (11) Centrifuges for separating plasma from blood. (12) Centrifuges for drying radioactive sludge. (13) Centrifugal honey extractors. PARTS Subject to the general provisions regarding the classification of parts (see the General Explanatory Note to Section XVI), parts of centrifuges are also classified in this heading (e.g., plates, bowls, baskets, chambers and casings). This heading excludes certain types of equipment in the operation of which centrifugal force is used, such as: (a) special centrifuges known as "gas" centrifuges, designed for the separation of uranium isotopes (heading 8401); (b) centrifugal pumps for liquids (heading 8413); (c) centrifugal air pumps and blowers (heading 8414); (d) centrifugal sifting machines for the milling industry (heading 8437); (e) centrifugal casting machines for metal (e.g., for cast iron pipes) (heading 8454) or for unset cement (e.g., for casting concrete pipes) (heading 8474); (f) centrifugal grinding machines (heading 8474); (g) spin dryers for the manufacture of semiconductor wafers (heading 8486). (II) FILTERING OR PURIFYING MACHINERY AND APPARATUS FOR LIQUIDS OR GASES Many kinds of filtering or purifying units of this heading are stationary appliances with no moving parts. This heading covers filters and purifiers of all types (physical or mechanical, chemical, magnetic, electromagnetic, electrostatic, etc.). The heading covers not only large industrial installations but also filters for internal combustion engines and for small domestic appliances. Nevertheless, this heading excludes filter funnels, milk strainers and vessels, tanks, etc., merely fitted with screens of metal or other material, as well as general-purpose vessels, tanks, etc., even if intended for use as filters after a layer of gravel, sand, charcoal, etc., has been placed in them.

In general, filtering units and equipment of this heading are divided into two types according to whether they are intended for liquid or gas. (A) Units, etc. for filtration and purification of liquids, including water softeners. Filters for cleaning liquids of this group separate solid, fat, colloidal and other particles from the liquid, for example, by passing it through a sheet, diaphragm or a mass of porous material (for example, fabric, felt, wire fabric, leather, ceramics, porcelain, kieselgur, sintered metal powders, asbestos, paper pulp, charcoal, soot, sand). When treating drinking water, some of these materials (e.g. porcelain and charcoal) remove bacteria, etc., during the filtration process; therefore, the filters made of them are sometimes called "water purifiers". Filters are also used to remove liquids from materials in the form of suspensions (for example, from ceramic materials or ore concentrates). This heading covers filters for the purification of fluids of gravitational, suction (or vacuum) or press types. This includes, inter alia: (1) Household water filters: Household press-type filters are designed for installation on main pipes or taps and usually consist of a cylindrical ceramic filter element enclosed in a metal housing. Gravitational filters are of the same type, but they are often large. This heading does not cover filters made mainly of ceramics or glass (Chapter 69 or 70, respectively). (2) Candle filters for the production of chemical textile materials . . These filters consist of a corrosion-resistant casing that houses a textile material element that filters the spinning solution. (3) Oil filters for internal combustion engines, machine tools, etc. There are two main types: (i) filters with a filter element from layers of felt, metal mesh, steel "wool", etc.; (ii) filters with permanent magnets or electromagnets to remove iron particles from the oil. (4) Boiler water filters. These filters are usually large vessels with several layers of filtering materials placed on top of each other. In addition to the intake and exhaust pipes, a system of tubes and valves is provided for cleaning the filter elements with a stream of water supplied in the transverse direction. (5) Filter presses. They consist of a horizontal series of filter chambers formed by easily removed vertical plates and frames coated with a filtering material (tissue, cellulose, etc.). Filter parts are connected by either a screw or a press mechanism. The liquid is pumped through the cells by a pump. Cameras can be heated from the inside by steam, etc. The filter is removed from the filter and the sediment is collected in the space between the plates. Filter presses are used to filter and purify many liquids (for example, in the chemical industry, in the sugar industry, in brewing, in wine production, in oil purification, in ore enrichment, in the production of ceramics, chemical threads, etc.).

(6) Rotating drum vacuum filters. These filters consist of a cylinder covered with a filter cloth or mesh. They are installed in tanks with liquid to be filtered. The liquid is sucked into the drum, and special mechanical devices remove solid sediment from the geripheral surfaces. (7) Intermittent vacuum filters: These filters consist of a series of "flips" or chambers, each coated with a filter cloth and connected to a common vacuum line. The filter is immersed in a tank of liquid, then a vacuum is created. (8) Chemical water purifiers, that is, permutite or zeolite softeners and lime water purifiers. (9) Electromagnetic water purifiers. In these devices, the action of a variable magnetic field does not allow calcium salts contained in water to crystallize and form a sediment on the walls of the pipes. Instead, the salts form a sludge that is easily removed. This heading also includes dialyzers, filters of a special type having a semi-permeable membrane through which the liquid passes by diffusion and is thus separated from colloidal particles. (B) Units, etc. for filtration or purification of gases. These gas filters and purifiers are designed to separate solid or liquid particles from gases or to isolate valuable products (for example, coal dust, metal particles, etc., extracted from the flue gases) or to remove harmful substances (for example, the release of dust, the removal of resins, etc. from gas calls or smokes, the removal of oils from steam engines). These include: (1) Filters and cleaners that use only mechanical or physical methods. In the first type, as in the case of liquid filters, the separation element has a porous surface or is a porous mass (feel, fabric, metal sponge, glass wool, etc.). In the second type, separation is provided by a sharp decrease in the speed of particles moving with the gas, which are then collected under the action of gravity, captured by the oil surface, etc. Filters of this type often have fans or use water jets. Filters of the first type include: (i) air filters for Oranium internal sg engines. They often combine both systems described above; (ii) bag filters. These filters consist of a series of bag-like fabric filter elements and are often provided with a shaking mechanism that causes the trapped particles to fall to the bottom of the bags; (iii) screen filters. These filters are an endless filter mesh moving on two rollers and stretched across the chamber through which the gases pass. The screen is cleaned by a scraper mechanism; (iv) rotating drum filters, such as in sandblasting installations. They usually consist of filter drums where sucked.

air. As the drum rotates, its surface is cleaned by a scraper which removes the deposit. Filters of the second type include: (v) dust collectors, smoke filters, etc., fitted with various baffle elements to reduce the velocity of the particles in the gas stream, e.g., deflectors, perforated partitions with staggered openings, circular or spiral paths with deflectors, and cones formed of superimposed baffle rings; (vi) cyclones, usually in the form of sheet-metal cones enclosed in a cylindrical casing. The gases are fed into the narrow part of the cone through a tangential pipe, and the velocity of the turbulent currents thus created decreases sharply as the gas approaches the wider part of the cone. As a result, the dust falls to the bottom of the container. (2) Electrostatic filters for air or other gases, in which the essential element is a series of vertical wires charged with static electricity. The dust contained in the air passes through the device, is attracted to the wires and remains on them. The dust is removed periodically. (3) Gas absorbers or absorption towers. These are used for purifying producer gas, coal gas, etc. They consist of tall metal columns containing coke or other packing materials. Water sprayers are fitted at the top. (4) Other chemical filters and purifiers for air or gases (including catalytic converters which transform the carbon monoxide contained in the exhaust gases of motor vehicles). This category also covers the following apparatus used in the nuclear industry: air filters specially designed for the extraction of radioactive dust (of the physical or electrostatic type); activated carbon purifiers for trapping radioactive iodine; ion-exchange apparatus for the separation of radioactive elements, including units operating by electrodialysis; separators for irradiated fuel or process effluents operating on the ion-exchange principle or chemical separators (using solvents, precipitation, etc.). PARTS Subject to the general provisions regarding the classification of parts (see the General Explanatory Note to Section XVI), the heading covers parts of the types of filters and purifiers described above. These include, inter alia: filtering elements for discontinuous vacuum filters; casings, frames and plates for filter presses; rotating drums for liquid and gas filters; deflectors and perforated plates for gas filters. It should be noted, however, that filter blocks of paper pulp fall in heading 4812 and that many other filtering elements (ceramics, fabrics, felt, etc.) are classified according to the material of which they are made. The heading also excludes: (a) gaseous diffusion apparatus for the separation of uranium isotopes (heading 8401);

(b) air conditioning installations of heading 8415 or air dryers of heading 8479; (c) presses for winemaking, cider production, etc. (heading 8435); (d) artificial kidney (dialysis) apparatus (heading 9018).

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) millstones, grinding stones or other articles of Chapter 68;

(b) equipment or devices (e.g. pumps) of ceramic materials and ceramic parts of machinery or devices of any material (Chapter 69);

(c) laboratory glassware (heading 7017); equipment, devices or other articles for technical purposes or parts thereof of glass (heading 7019 or 7020);

(d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81);

(e) vacuum cleaners of heading 8508;

(f) electromechanical household appliances of heading 8509; digital cameras of heading 8525;

(g) radiators for articles of Section XVII; or

(h) manual mechanical brushes for floor cleaning, without engine (heading 9603).

2. Subject to the provisions of Note 3 to Section XVI and Note 11 to this Chapter, a machine or device which meets the description in one or more of headings 8401 to 8424 or heading 8486 and at the same time the description in one or more headings 8425 to 8480 is included in the relevant heading of the first series of headings or in heading 8486 as the case may be, and not in the second series.

(A) However, heading 8419 does not cover:

(i) seed germination equipment, incubators or brooders (heading 8436);

(ii) machinery for wetting grains (heading 8437);

(iii) diffusion apparatus for the extraction of sugary juice (heading 8438);

(iv) equipment for the heat treatment of textile yarn, textile materials or finished textile articles (heading 8451); or

machining equipment, assemblies or laboratory equipment in which temperature change, even if necessary, is an auxiliary process.

(B) Heading 8422 does not cover:

(i) sewing machines for sewing bags or similar packagings (heading 8452); or

(ii) office equipment of heading 8472.

(C) Heading 8424 does not cover:

(i) paint-blasting printing presses (heading 8443); or

(ii) water jet cutting machines (heading 8456).

3. A machine for processing any material which corresponds to the description of heading 8456 and simultaneously to the description of heading 8457 to 8461, 8464 or 8465 is classified in heading 8456.

4. Heading 8457 covers only metalworking machines other than lathes (including multipurpose lathes) which may perform different types of machining operations by:

(a) the automatic replacement of tools from a tool store or similar device in accordance with the processing program(s);

(b) the automatic application simultaneously or sequentially of different processing heads operating at a fixed workpiece (assembly single-position machines); or

(c) automatic movement of the workpiece to various processing heads (multi-position machines).

5. For the purposes of heading 8462, the term “longitudinal cutting line” for flat products means a process line consisting of a winder, a correct device, a longitudinal cutting device and a winder. The term “cross-cutting line” for flat products means a process line consisting of a unwinder, a correct device and a cutting device.

6. (A) For the purposes of heading 8471, the term “computers” means machines capable of:

(i) store the processing program or programs and at least the information currently necessary to execute the program;

(ii) be freely reprogrammable according to user requirements;

(iii) perform user-defined arithmetic calculations; and

(iv) perform, without human intervention, a processing program requiring the computer to modify its actions by making logical decisions during processing.

(B) Computing machines can be made in the form of systems consisting of a different number of individual blocks.

(C) Subject to the provisions of Notes (D) and (E) below, a block shall be treated as part of a computing system if it satisfies all of the following conditions:

(i) exclusively or principally used in a computing system;

(ii) is capable of being connected to the central processing unit either directly or through one or more other units; and

(iii) is capable of receiving or presenting information in such form (codes or signals) as may be used by the system.

Separately presented computer units are classified in heading 8471.

However, keyboards, X-Y-coordinate input devices and disk storage units which satisfy the conditions laid down in Notes (B) (ii) and (B) (iii) above are in all cases to be regarded as blocks of heading 8471.

(D) Heading 8471 does not cover the following devices, presented separately, even if they meet all the conditions of Note 6(C) above:

(i) printers, copiers, facsimile machines, combined or not;

(ii) apparatus for receiving or transmitting voice, images or other data, including apparatus for providing communications over a wired or wireless communication network (for example, on a local or wide area network);

(iii) loudspeakers and microphones;

(iv) television cameras, digital cameras and video recording cameras;

(v) monitors and projectors not combined with television reception equipment.

(E) Machines containing or working in conjunction with a computer and performing specific functions other than information processing are classified in the headings according to their specific functions or, if this is not possible, in the residual headings.

7. Heading 8482, inter alia, covers polished steel balls whose maximum and minimum diameter does not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is smaller. Other steel balls are classified in heading 7326.

8. A machine which is used for more than one purpose shall be classified as if its primary purpose were the only one.

Subject to the provisions of Note 2 to this Chapter and Note 3 to Section XVI, a machine whose primary purpose is not described in any heading or a machine in which none of its functions is primary is classified in heading 8479, unless the context otherwise provides. Heading 8479 also includes machinery for the manufacture of ropes or ropes (e.g. knitting machines) from metal wire, textile yarn or other materials or from a combination of such materials.

9. For the purposes of heading 8470, the term “pocket” applies only to devices not exceeding 170 x 100 x 45 mm.

10. For the purposes of heading 8485, the term additive manufacturing (also referred to as 3D printing) means the formation of physical objects based on a digital model by successively adding and layering, sealing and curing a material (e.g., metal, plastics or ceramics).

Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machines as described in heading 8485 are classified in that heading and no other heading of the Nomenclature.

11. (A) Notes 12(a) and 12(b) to Chapter 85 also apply to the terms “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this note and in heading 8486. However, in this note and in heading 8486, the term "semiconductor devices" also applies to photosensitive semiconductor devices and LEDs.

(B) In this note and in heading 8486, the term “plane display panel production” covers the fabrication of a flat panel of substrates. It does not cover the production of glass or the installation of printed circuit boards or other electronic components on flat panels. The term "flat display panel" does not apply to cathode ray tube technology.

(C) Heading 8486 also includes machinery and apparatus used exclusively or principally for:

(i) producing or eliminating defects in masks and patterns;

assemblies of semiconductor devices or electronic integrated circuits;

(iii) lifting, manipulating, loading or unloading boules, plates, semiconductor devices, electronic integrated circuits and flat display panels.

(D) Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machinery meeting the description in heading 8486 is classified in this heading and in no other heading of the Nomenclature.

Subheading notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. For the purposes of subheading 8465 20, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.

2. For the purposes of subheading 8471 49, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).

3. For the purposes of subheading 8481 20, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481.

4. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.

Additional notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheadings 8407 10 and 8409 10, the term “aviation engines” shall apply only to engines intended for assembly with an air or rotor.

2. В подсубпозицию 8471 70 300 0 также включаются устройства считывания компакт-дисков, являющиеся запоминающими устройствами вычислительных машин, которые предназначены для считывания сигналов с CD-ROM, аудиокомпакт-дисков и фотокомпакт-дисков и снабжены разъемом для наушников, регулятором громкости или кнопкой пуск/стоп.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheading 8482 10 900 1, the term “gross mass” means the total mass of the goods with all kinds of packaging materials and packagings ensuring their safety during storage and transport. The total weight of the goods does not include the mass of packaging materials or containers that are clearly suitable for reuse.

2. For the purposes of subheading 8415 81 001 0, the term “special production facilities” means premises in which the maintenance of precise values of temperature and humidity is due to the operational requirements of the equipment installed therein, such as machines, computers, switching equipment, surgical equipment, etc., or to the operations performed therein.

3. In subheadings 8427 20 190 1, 8427 90 000 1 and 8436 80 100 1, the date of manufacture shall be determined on the basis of the technical documentation of the manufacturer (technical passport, instruction manual) and the manufacturer's plate, which shall be fixed in a conspicuous, easily accessible place of the machinery and shall not be replaced during operation. If the manufacturer's technical documentation and the manufacturer's plate contain conflicting information about the date of manufacture or there is no information about the manufacturer of the equipment on the date of manufacture, then this technique is considered a technique, since the release of which more than 3 years have passed.

If the manufacturer's information indicates only the year of manufacture, then the date of manufacture of the equipment is considered 1 July of the year of manufacture; if the month and year of manufacture are indicated, the date of manufacture is the 15th day of the month specified in the manufacturer's information.

4. For the purpose of classification of goods in subheading 8482 10 900 1 in the states, whose territories constitute the customs territory of the Eurasian Economic Union, when applying the term "French border of the country of importation", the country of import is understood as the customs territory of the Eurasian Economic Union.

5. For the purpose of subheading 8407 10 000 3, the term “take-off power” means the maximum power developed by an aircraft piston engine.

“Take-off power” is specified in the technical documentation and (or) accompanying documents, measured in kilowatts or horsepower (1 kW corresponds to 1.35962 hp).

6. В подсубпозиции 8421 99 000 5 термин «элементы мембранные рулонного типа для фильтрования или очистки жидкостей» означает устройства цилиндрической формы, состоящие из:

- internal plastic perforated tube on which spirally wound membrane bags;

- drainage material located between membrane bags and glued to them on three sides.

The membrane package consists of a twice folded band of membrane containing an extruded grid inside.

At the ends of the membrane roll-type element, fixing discs and sealing cuffs can be installed.

7. For the purposes of subheading 8415 20 000 2, the term “in a single enclosure” refers to air conditioning units (air conditioners) in which all the elements are combined in a single enclosure, frame or platform.

The term "in a single housing" also applies to air conditioning units (air conditioners) in which the refrigeration compressor, which is part of a given air conditioning unit (air conditioner), is located separately, that is, not combined with the rest of the elements in one housing, on one frame or on one platform.