8448 49 00 — Auxiliary machinery for use with machines of heading 8444, 8445, 8446 or 8447 (for example, dobbies, Jacquards, automatic stop motions, shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of this heading or of heading 8444, 8445, 8446 or 8447 (for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald frames, hosiery needles): parts and accessories of weaving machines (looms) or of their auxiliary machinery: other

8448 Auxiliary machinery for use with machines of heading 8444, 8445, 8446 or 8447 (for example, dobbies, Jacquards, automatic stop motions, shuttle changing mechanisms); parts and accessories suitable for use solely or principally with the machines of this heading or of heading 8444, 8445, 8446 or 8447 (for example, spindles and spindle flyers, card clothing, combs, extruding nipples, shuttles, healds and heald-frames, hosiery needles): – Auxiliary machinery for machines of heading 8444, 8445, 8446 or 8447: 8448 11 – – Dobbies and Jacquards; card reducing, copying, punching or assembling machines for use therewith 8448 19 – – Other 8448 20 – Parts and accessories of machines of heading 8444 or of their auxiliary machinery – Parts and accessories of machines of heading 8445 or of their auxiliary machinery: 8448 31 – – Card clothing 8448 32 – – Of machines for preparing textile fibres, other than card clothing 8448 33 – – Spindles, spindle flyers, spinning rings and ring travellers 8448 39 – – Other – Parts and accessories of weaving machines (looms) or of their auxiliary machinery: 8448 42 – – Reeds for looms, healds and heald-frames 8448 49 – – Other – Parts and accessories of machines of heading 8447 or of their auxiliary machinery:

8448 51 - Platinums, needles and other elements for the formation of loops, seams, stitches, weaves 8448 59 - other

This heading includes: (I) All auxiliary machinery and equipment which perform, separately or simultaneously, a function complementary to that of the machinery referred to in heading 8444, 8445, 8446 or 8447 (in particular spinning machines, looms, knitting machines or embroidery machines). These auxiliary machines can either extend the capabilities of the main machines (as in the case of remis lifting coaches to and Jacquard machines), or mechanically perform a specific function necessary for the normal operation of the main machine (as in the case of stop mechanisms at the break of the base or duck, machines for tying the base). (II) Parts of machinery of this heading and parts of machinery of heading 8444, 8445, 8446 or 8447 (see general provisions to section XVI). (III) Miscellaneous accessories used with machines of heading 8444, 8445, 8446 or 8447 or of this heading; in general, the term "accessions" refers to equipment which is not an integral part of machinery which is interchangeable and must be replaced frequently (for example, by reason of rapid wear and tear or, if necessary, replacement for different types of work). (A) Auxiliary Equipment to this category of goods includes: (1) Auxiliary equipment for use with spinning machines, for example, automatic devices that remove fully wound packs and replace them with empty cartridges, as well as mobile devices for installing rows of empty cartridges. (2) Stands or frames for weaving navoi. These struts hold the weaving navoi in the process of slicing or during the winding of the weaving navoi; in some cases they hold the weaving navoi in the process of weaving. (3) Remis lifting carriages and jacquard machines, which are used to obtain more complex weaving on the loom than is possible without these mechanisms. Remis lifting carriages control the lifting of a large number of remises, and Jacquard machines provide the lifting of individual threads of the base. They are controlled by several slats with protruding pins that form cardboard, or in many cases (notably Jacquard machines) – a set of perforated cards loosely connected to form continuous cardboard. These pins or needles, some of which begin to move in accordance with the perforation of the cards, actuate the mechanism of lifting the threads of the base. Similar mechanisms (Verdol machines) work with continuous punch tapes. (4) Mechanisms for installation on Jacquard machines for the purpose of leaving certain cards in place when more than one thread is inserted. This reduces the number of cards required and increases the speed of weaving. (5) Machines for cross-linking perforated cards to be assembled into cardboard ready for use on Jacquard machines.

(6) Warp or weft stop motions. These mechanisms cause the immediate stopping of the loom in the event of breakage of a warp thread or a weft thread; and also weft package feelers for ensuring continuous feeding of the weft threads by changing the package when necessary. This heading covers equipment of this type whether electric or non-electric. (7) Knotters. These are small mechanisms mounted on the loom above the sheet of warp threads and used for joining them in case of breakage during weaving. This heading excludes the warp-tying or warp-drawing-in machines of heading 8445. (8) Leno devices, which, during weaving, cross certain warp threads to form loops through which the weft threads pass. They are used for producing gauze and other leno fabrics. (9) Swivel shuttle mechanisms. These devices enable a swivel shuttle to pass between certain warp threads to produce stitched patterns. (10) Warp pile devices. These devices, by alternating movement of the reed, form loops on one or both sides of the fabric (terry fabrics, etc.). (11) Selvedge-forming machines. When a wide loom is used for the simultaneous production of several narrow fabrics, these machines produce a leno weave or overstitch the edge of the fabrics at which the weft threads are to be cut to separate the narrow fabrics. (12) Devices containing photoelectric cells, which detect defects in articles during knitting, in yarn during winding on a warping machine, etc., and stop the machine with which they are used when a defect is detected. (13) Automatic cop-changing devices for looms. (14) Mechanisms for inserting drop wires into automatic stop motions. (15) Warp protectors for warping, sizing and knitting machines. (16) Bobbin holders. (17) Grid bars and beaters (beater blades) for opening machines, and beaters for mechanical quilting machines. (18) Cylinders and drums for mechanical quilting machines, and for carding or combing machines. (19) Agitators, drums and cylinders for wool-washing machines or oiling machines. (20) Drafting systems for drawing frames, roving frames or ring spinning frames, and cylinders for them. (21) Mechanical yarn clearers of simple construction for winding machines, designed for removing knots and other yarn defects. Some of the above devices may form an integral part of certain looms (Jacquard looms, automatic looms and

etc.). On a separate presentation, they are classified in this heading not as auxiliary equipment but as parts of machinery of heading 8444, 8445, 8446 or 8447. (b) PARTS AND PRACTICES This category of goods includes: (1) Spoolers for holding bolts in the process of resting. (2) Spinner spindles and rods for spinning machines. (3) Centrifugal circles (often plastic) in which chemical threads are laid in the form of cakes during their production. (4) Crests for comb machines; falling combs, that is, needle slats used on rowing tape machines. (5) A needle-shaped headset (including narrow tapes known as needle tapes) with wire needles and an all-metal saw-shaped headset. (6) Runners, which are open rings mounted on the spinning rings of the spinning frame to ensure the torsion necessary for the formation of yarn. (7) Molding tips, filters, etc., used in the molding of chemical filaments, including those made of precious metals, but excluding those made of ceramics (heading 6909) or glass (heading 7020). (8) Guides for thread (but not of glass or ceramics, see headings 7020 and 6909, or consisting wholly of ag ata or other precious or semi-precious stones, see heading 7116). (9) Weaving waxes, from which the threads of the base are wound in the process of weaving. (10) Byrd for looms (including adjustable expanding rows). They make the surf of each refinement to the previous one in the process of weaving. (11) Frames on which remakes of looms are mounted. (12) Shuttles, with the exception of spools on which yarn (thread) is wound. (13) Metallic galleys, both plate-shaped and made of two twisted wire segments, with eyes through which the base threads pass, and metal garters that connect the remise frames to the yawning mechanism. This heading does not cover straps and garters of yarn or cords (heading 5911). (14) Faces, thin metal weights with holes at the upper ends for attachment to each arcade cord of the loom. (15) Frame and cassette boards, i.e. perforated boards (usually made of wood or vulcanized fiber) used with Jacquard or similar machines. (16) Jacquard machine hooks: A large number of these special latching hooks are used in Jacquard machines to connect arcade cords to frame cords. (17) Knitting machine needles, such as hook needles, including knives to cut pile and needles of canvas dissolution machines, tongue needles (called

also latch needles), with one or two latches, compound needles in which the latch is replaced by a sliding closing element, tubular needles, hook needles for chain-stitch machines. (18) Needle bars, combs, pushers, etc., of machines for making tulle or lace and of embroidery machines. (19) Jacks for knitting machines. (20) Elastic sleeves of plastics for pressure rollers. (21) Shuttles for weaving looms (loom shuttles), embroidery machines and net-making machines. (22) Sinkers for knitting machines, e.g., holding-down sinkers, forming sinkers, knock-over sinkers, comb sinkers, double-nosed sinkers, yarn-guiding sinkers, Jacquard sinkers. These parts are made of thin steel plates approximately 0.1 – 2 mm thick with a very wide variety of profiles, which assist the needles (mainly bearded or latch needles) in forming the loops. (23) Auxiliary loop-forming devices, e.g., wave mechanisms, their guides, pattern mechanism knives, spreaders, pins and pushers. (24) Weavers' beams, sectional beams and beam trays, beam brakes and automatic beam let-off regulators. (25) Plates and hanging hooks of knives, and teeth for combs. (26) Templates for weaving machines. (27) Shuttle boxes. (28) Steel parts used on looms for forming loops, including parts with a cutting edge. (29) Hooks for chain-stitch (shuttleless) machines. (30) Needle beds of circular hosiery machines, knock-over sinkers, cams and sinkers for flat knitting machines, needle cams and needle cylinders for circular knitting machines. (31) Needles for lace and tulle machines, and hooks for net-making machines. (32) Needles and frames for embroidery machines. (33) Spindles for braiding and winding machines. (34) Thread brake (tension) devices and reeds for warping machines and for mechanical sizing machines. (35) Needles, plates, "knives" and knife frames for dobbies or Jacquard machines. (36) Magazines (lifting, rotary, etc.) for automatic shuttle changing. (37) Magazines for automatic changing of weft packages. (38) Drop wires (thin plates) for automatic warp stop motions. This heading also excludes, inter alia:

(a) pumps used for the molding of chemical threads (heading 8413); (b) filters used in the molding of chemical threads (heading 8421); (c) sewing machine needles (heading 8452); (d) recorded information carriers for the control of jacquard or similar machines (heading 8523); (d) pelvis for ribbon or eweeds (classified according to the materials of which they are made); (e) price rods (simplicitous rods made of metal (classes of which are made of spongs) with similar materials (shafts) which are used in accordance with spongs and with spouting materials (grades)

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) millstones, grinding stones or other articles of Chapter 68;

(b) equipment or devices (e.g. pumps) of ceramic materials and ceramic parts of machinery or devices of any material (Chapter 69);

(c) laboratory glassware (heading 7017); equipment, devices or other articles for technical purposes or parts thereof of glass (heading 7019 or 7020);

(d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81);

(e) vacuum cleaners of heading 8508;

(f) electromechanical household appliances of heading 8509; digital cameras of heading 8525;

(g) radiators for articles of Section XVII; or

(h) manual mechanical brushes for floor cleaning, without engine (heading 9603).

2. Subject to the provisions of Note 3 to Section XVI and Note 11 to this Chapter, a machine or device which meets the description in one or more of headings 8401 to 8424 or heading 8486 and at the same time the description in one or more headings 8425 to 8480 is included in the relevant heading of the first series of headings or in heading 8486 as the case may be, and not in the second series.

(A) However, heading 8419 does not cover:

(i) seed germination equipment, incubators or brooders (heading 8436);

(ii) machinery for wetting grains (heading 8437);

(iii) diffusion apparatus for the extraction of sugary juice (heading 8438);

(iv) equipment for the heat treatment of textile yarn, textile materials or finished textile articles (heading 8451); or

machining equipment, assemblies or laboratory equipment in which temperature change, even if necessary, is an auxiliary process.

(B) Heading 8422 does not cover:

(i) sewing machines for sewing bags or similar packagings (heading 8452); or

(ii) office equipment of heading 8472.

(C) Heading 8424 does not cover:

(i) paint-blasting printing presses (heading 8443); or

(ii) water jet cutting machines (heading 8456).

3. A machine for processing any material which corresponds to the description of heading 8456 and simultaneously to the description of heading 8457 to 8461, 8464 or 8465 is classified in heading 8456.

4. Heading 8457 covers only metalworking machines other than lathes (including multipurpose lathes) which may perform different types of machining operations by:

(a) the automatic replacement of tools from a tool store or similar device in accordance with the processing program(s);

(b) the automatic application simultaneously or sequentially of different processing heads operating at a fixed workpiece (assembly single-position machines); or

(c) automatic movement of the workpiece to various processing heads (multi-position machines).

5. For the purposes of heading 8462, the term “longitudinal cutting line” for flat products means a process line consisting of a winder, a correct device, a longitudinal cutting device and a winder. The term “cross-cutting line” for flat products means a process line consisting of a unwinder, a correct device and a cutting device.

6. (A) For the purposes of heading 8471, the term “computers” means machines capable of:

(i) store the processing program or programs and at least the information currently necessary to execute the program;

(ii) be freely reprogrammable according to user requirements;

(iii) perform user-defined arithmetic calculations; and

(iv) perform, without human intervention, a processing program requiring the computer to modify its actions by making logical decisions during processing.

(B) Computing machines can be made in the form of systems consisting of a different number of individual blocks.

(C) Subject to the provisions of Notes (D) and (E) below, a block shall be treated as part of a computing system if it satisfies all of the following conditions:

(i) exclusively or principally used in a computing system;

(ii) is capable of being connected to the central processing unit either directly or through one or more other units; and

(iii) is capable of receiving or presenting information in such form (codes or signals) as may be used by the system.

Separately presented computer units are classified in heading 8471.

However, keyboards, X-Y-coordinate input devices and disk storage units which satisfy the conditions laid down in Notes (B) (ii) and (B) (iii) above are in all cases to be regarded as blocks of heading 8471.

(D) Heading 8471 does not cover the following devices, presented separately, even if they meet all the conditions of Note 6(C) above:

(i) printers, copiers, facsimile machines, combined or not;

(ii) apparatus for receiving or transmitting voice, images or other data, including apparatus for providing communications over a wired or wireless communication network (for example, on a local or wide area network);

(iii) loudspeakers and microphones;

(iv) television cameras, digital cameras and video recording cameras;

(v) monitors and projectors not combined with television reception equipment.

(E) Machines containing or working in conjunction with a computer and performing specific functions other than information processing are classified in the headings according to their specific functions or, if this is not possible, in the residual headings.

7. Heading 8482, inter alia, covers polished steel balls whose maximum and minimum diameter does not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is smaller. Other steel balls are classified in heading 7326.

8. A machine which is used for more than one purpose shall be classified as if its primary purpose were the only one.

Subject to the provisions of Note 2 to this Chapter and Note 3 to Section XVI, a machine whose primary purpose is not described in any heading or a machine in which none of its functions is primary is classified in heading 8479, unless the context otherwise provides. Heading 8479 also includes machinery for the manufacture of ropes or ropes (e.g. knitting machines) from metal wire, textile yarn or other materials or from a combination of such materials.

9. For the purposes of heading 8470, the term “pocket” applies only to devices not exceeding 170 x 100 x 45 mm.

10. For the purposes of heading 8485, the term additive manufacturing (also referred to as 3D printing) means the formation of physical objects based on a digital model by successively adding and layering, sealing and curing a material (e.g., metal, plastics or ceramics).

Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machines as described in heading 8485 are classified in that heading and no other heading of the Nomenclature.

11. (A) Notes 12(a) and 12(b) to Chapter 85 also apply to the terms “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this note and in heading 8486. However, in this note and in heading 8486, the term "semiconductor devices" also applies to photosensitive semiconductor devices and LEDs.

(B) In this note and in heading 8486, the term “plane display panel production” covers the fabrication of a flat panel of substrates. It does not cover the production of glass or the installation of printed circuit boards or other electronic components on flat panels. The term "flat display panel" does not apply to cathode ray tube technology.

(C) Heading 8486 also includes machinery and apparatus used exclusively or principally for:

(i) producing or eliminating defects in masks and patterns;

assemblies of semiconductor devices or electronic integrated circuits;

(iii) lifting, manipulating, loading or unloading boules, plates, semiconductor devices, electronic integrated circuits and flat display panels.

(D) Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machinery meeting the description in heading 8486 is classified in this heading and in no other heading of the Nomenclature.

Subheading notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. For the purposes of subheading 8465 20, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.

2. For the purposes of subheading 8471 49, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).

3. For the purposes of subheading 8481 20, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481.

4. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.

Additional notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheadings 8407 10 and 8409 10, the term “aviation engines” shall apply only to engines intended for assembly with an air or rotor.

2. В подсубпозицию 8471 70 300 0 также включаются устройства считывания компакт-дисков, являющиеся запоминающими устройствами вычислительных машин, которые предназначены для считывания сигналов с CD-ROM, аудиокомпакт-дисков и фотокомпакт-дисков и снабжены разъемом для наушников, регулятором громкости или кнопкой пуск/стоп.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheading 8482 10 900 1, the term “gross mass” means the total mass of the goods with all kinds of packaging materials and packagings ensuring their safety during storage and transport. The total weight of the goods does not include the mass of packaging materials or containers that are clearly suitable for reuse.

2. For the purposes of subheading 8415 81 001 0, the term “special production facilities” means premises in which the maintenance of precise values of temperature and humidity is due to the operational requirements of the equipment installed therein, such as machines, computers, switching equipment, surgical equipment, etc., or to the operations performed therein.

3. In subheadings 8427 20 190 1, 8427 90 000 1 and 8436 80 100 1, the date of manufacture shall be determined on the basis of the technical documentation of the manufacturer (technical passport, instruction manual) and the manufacturer's plate, which shall be fixed in a conspicuous, easily accessible place of the machinery and shall not be replaced during operation. If the manufacturer's technical documentation and the manufacturer's plate contain conflicting information about the date of manufacture or there is no information about the manufacturer of the equipment on the date of manufacture, then this technique is considered a technique, since the release of which more than 3 years have passed.

If the manufacturer's information indicates only the year of manufacture, then the date of manufacture of the equipment is considered 1 July of the year of manufacture; if the month and year of manufacture are indicated, the date of manufacture is the 15th day of the month specified in the manufacturer's information.

4. For the purpose of classification of goods in subheading 8482 10 900 1 in the states, whose territories constitute the customs territory of the Eurasian Economic Union, when applying the term "French border of the country of importation", the country of import is understood as the customs territory of the Eurasian Economic Union.

5. For the purpose of subheading 8407 10 000 3, the term “take-off power” means the maximum power developed by an aircraft piston engine.

“Take-off power” is specified in the technical documentation and (or) accompanying documents, measured in kilowatts or horsepower (1 kW corresponds to 1.35962 hp).

6. В подсубпозиции 8421 99 000 5 термин «элементы мембранные рулонного типа для фильтрования или очистки жидкостей» означает устройства цилиндрической формы, состоящие из:

- internal plastic perforated tube on which spirally wound membrane bags;

- drainage material located between membrane bags and glued to them on three sides.

The membrane package consists of a twice folded band of membrane containing an extruded grid inside.

At the ends of the membrane roll-type element, fixing discs and sealing cuffs can be installed.

7. For the purposes of subheading 8415 20 000 2, the term “in a single enclosure” refers to air conditioning units (air conditioners) in which all the elements are combined in a single enclosure, frame or platform.

The term "in a single housing" also applies to air conditioning units (air conditioners) in which the refrigeration compressor, which is part of a given air conditioning unit (air conditioner), is located separately, that is, not combined with the rest of the elements in one housing, on one frame or on one platform.