8475 29 00 — Machines for assembling electric or electronic lamps, tubes or cathode-ray tubes or gas-discharge lamps, in glass envelopes; machines for manufacturing or hot working glass or glassware: machines for manufacturing or hot working glass or glassware: other

8475 Machines for assembling electric or electronic lamps, tubes or cathode-ray tubes or discharge lamps, in glass envelopes; machines for manufacturing or hot working glass or glassware: 8475 10 – machines for assembling electric or electronic lamps, tubes or cathode-ray tubes or discharge lamps, in glass envelopes – machines for manufacturing or hot working glass or glassware: 8475 21 – – machines for making optical fibres and preforms thereof 8475 29 – – other 8475 90 – parts

This heading covers machinery for the assembly of electric or electronic lamps, tubes or cathode ray tubes or gas discharge lamps in glass bulbs. It also includes machinery for the manufacture or

hot treatment of stacks or glass articles (other than furnaces of heading 84 17 or 8514). (I) Machines for assembly of electric or electronic lamps, tubes or electronic ray tubes or gas-discharge lamps in glass tubes This category of goods includes: (A) Machines for vacuum sealing bulbs. (B) Rotary machines for automatic assembly of incandescent lamps or radio lamps. These machines generally include equipment for heat treatment of glass (e.g. gas burners with blowing or press sealing devices for sealing glass bulbs), but remain in this heading even if they do not include such equipment for processing glass. In addition, this heading also includes equipment for the assembly of electric incandescent lamps, the constituent parts of which are connected by conveyors, and which includes glass heat treatment equipment, pumps and lamp testing devices (see note 4 to section XVI). However, this heading does not include machinery used exclusively for the manufacture of metal parts of components of lamps or cathode ray tubes (for example, for the cutting or mounting of shielding nets, anodes or support elements (heading 8462), for the manufacture of metal filaments by spiral wounding (heading 8463), and for the welding of shielding nets or electrodes (heading 8468 or 8515)). (II) Machinery for the manufacture or hot treatment of glass or glassworking products of this heading are those machines which process glass (including molten quartz and other molten silica) which has been heated to a softened or liquid state. These machines mainly use casting, pulling, rolling, crimping, blowing, modeling, molding, etc. Machines for treating glass in a solid state (even if it is slightly heated to facilitate the operation) do not fall into this heading (heading 8464). (A) Machines for the manufacture of flat sheet glass This category of goods includes: (1) Machines for the manufacture of flat glass by the ejection of flat strips. A roughly shaped sheet of glass is captured by a special device; then the sheet is captured by rollers and is pulled vertically or horizontally as it passes through the glass annealing furnace. The resulting continuous tape is cut into sheets (mechanically or with the help of hot wire heated by electric current). (2) Machines for the manufacture of float glass. When manufactured by the float process method, the glass spreads horizontally on the surface of the molten medium to obtain an infinite glass tape, which is later cut into parts during the manufacturing process. (B) Other machines for hot glass treatment include:

(1) Machines for making bottles, etc. These include a wide variety of machines, ranging from simple mechanical devices for molding and blowing (driven by dilution or compressed air and using separate shapes) to automatic feeding machines of continuous action (with two rotating plates, one of which is made for coarse casting, and the other for finishing). (2) Special machines and presses for molding various glass articles (e.g. paving stones, shingles, insulators, blanks for optical glasses and hollow glass products), but excluding general-purpose presses (heading 8479). (3) Machines for drawing, molding or blowing glass tubes or pipes, as well as special machines for drawing pipes made of quartz glass. (4) Machines for the manufacture of glass beads, in particular machines in which pieces cut from tubes are rounded, rolled in heated rotating drums. (5) Machinery for the manufacture of fiberglass or glass threads. These machines fall into the following three main categories: (i) Glass filament machines for weaving. "" These machines contain a small electric furnace that is loaded with glass balls. The bottom of the furnace is a filter, having about a hundred very small holes; the threads are oiled as they come out of these holes and are connected using a special device for the formation of a tourniquet. It is wound on a rotating drum, which ensures continuous movement of the threads forward; (ii) Fiber-making machines. . These machines are equipped with an electric furnace and a filter, such as those mentioned above, but additionally, devices are also used to supply compressed air on each side in the form of converging jets. These jets perform a dual function: pull and break the threads. The fibres fall through the sprayed oilizer on a rotating perforated drum; the suction device located inside the b araban provides the connection of the fibers and the formation of a straight line that is wound into the bobbin; (iii) Special machines for making glass padding. The molten glass is poured onto a heated rotating disc; it sticks to the disk corrugated and is pulled into the fibers by centrifugal force. (6) Machines for blowing out flasks or for making other glass parts of electric lighting lamps or tubes, or electronic lamps or tubes, etc. (e.g., base blocks, support elements for filaments, rods). (7) Machines for the manufacture of optical fiber and its blanks. Subject to the general provisions relating to the classification of parts (see the general provisions of Section XVI), parts of machinery of this heading are classified in this heading. This heading also excludes: (a) hand-made glass-blowers (heading 8205);

(b) certain machines for the manufacture of hardened glass in which ordinary sheet glass is placed between heated plates and then sharply cooled (heading 8419); (c) forms for the manufacture of glass by hand or by hand (heading 8480).

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) millstones, grinding stones or other articles of Chapter 68;

(b) equipment or devices (e.g. pumps) of ceramic materials and ceramic parts of machinery or devices of any material (Chapter 69);

(c) laboratory glassware (heading 7017); equipment, devices or other articles for technical purposes or parts thereof of glass (heading 7019 or 7020);

(d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81);

(e) vacuum cleaners of heading 8508;

(f) electromechanical household appliances of heading 8509; digital cameras of heading 8525;

(g) radiators for articles of Section XVII; or

(h) manual mechanical brushes for floor cleaning, without engine (heading 9603).

2. Subject to the provisions of Note 3 to Section XVI and Note 11 to this Chapter, a machine or device which meets the description in one or more of headings 8401 to 8424 or heading 8486 and at the same time the description in one or more headings 8425 to 8480 is included in the relevant heading of the first series of headings or in heading 8486 as the case may be, and not in the second series.

(A) However, heading 8419 does not cover:

(i) seed germination equipment, incubators or brooders (heading 8436);

(ii) machinery for wetting grains (heading 8437);

(iii) diffusion apparatus for the extraction of sugary juice (heading 8438);

(iv) equipment for the heat treatment of textile yarn, textile materials or finished textile articles (heading 8451); or

machining equipment, assemblies or laboratory equipment in which temperature change, even if necessary, is an auxiliary process.

(B) Heading 8422 does not cover:

(i) sewing machines for sewing bags or similar packagings (heading 8452); or

(ii) office equipment of heading 8472.

(C) Heading 8424 does not cover:

(i) paint-blasting printing presses (heading 8443); or

(ii) water jet cutting machines (heading 8456).

3. A machine for processing any material which corresponds to the description of heading 8456 and simultaneously to the description of heading 8457 to 8461, 8464 or 8465 is classified in heading 8456.

4. Heading 8457 covers only metalworking machines other than lathes (including multipurpose lathes) which may perform different types of machining operations by:

(a) the automatic replacement of tools from a tool store or similar device in accordance with the processing program(s);

(b) the automatic application simultaneously or sequentially of different processing heads operating at a fixed workpiece (assembly single-position machines); or

(c) automatic movement of the workpiece to various processing heads (multi-position machines).

5. For the purposes of heading 8462, the term “longitudinal cutting line” for flat products means a process line consisting of a winder, a correct device, a longitudinal cutting device and a winder. The term “cross-cutting line” for flat products means a process line consisting of a unwinder, a correct device and a cutting device.

6. (A) For the purposes of heading 8471, the term “computers” means machines capable of:

(i) store the processing program or programs and at least the information currently necessary to execute the program;

(ii) be freely reprogrammable according to user requirements;

(iii) perform user-defined arithmetic calculations; and

(iv) perform, without human intervention, a processing program requiring the computer to modify its actions by making logical decisions during processing.

(B) Computing machines can be made in the form of systems consisting of a different number of individual blocks.

(C) Subject to the provisions of Notes (D) and (E) below, a block shall be treated as part of a computing system if it satisfies all of the following conditions:

(i) exclusively or principally used in a computing system;

(ii) is capable of being connected to the central processing unit either directly or through one or more other units; and

(iii) is capable of receiving or presenting information in such form (codes or signals) as may be used by the system.

Separately presented computer units are classified in heading 8471.

However, keyboards, X-Y-coordinate input devices and disk storage units which satisfy the conditions laid down in Notes (B) (ii) and (B) (iii) above are in all cases to be regarded as blocks of heading 8471.

(D) Heading 8471 does not cover the following devices, presented separately, even if they meet all the conditions of Note 6(C) above:

(i) printers, copiers, facsimile machines, combined or not;

(ii) apparatus for receiving or transmitting voice, images or other data, including apparatus for providing communications over a wired or wireless communication network (for example, on a local or wide area network);

(iii) loudspeakers and microphones;

(iv) television cameras, digital cameras and video recording cameras;

(v) monitors and projectors not combined with television reception equipment.

(E) Machines containing or working in conjunction with a computer and performing specific functions other than information processing are classified in the headings according to their specific functions or, if this is not possible, in the residual headings.

7. Heading 8482, inter alia, covers polished steel balls whose maximum and minimum diameter does not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is smaller. Other steel balls are classified in heading 7326.

8. A machine which is used for more than one purpose shall be classified as if its primary purpose were the only one.

Subject to the provisions of Note 2 to this Chapter and Note 3 to Section XVI, a machine whose primary purpose is not described in any heading or a machine in which none of its functions is primary is classified in heading 8479, unless the context otherwise provides. Heading 8479 also includes machinery for the manufacture of ropes or ropes (e.g. knitting machines) from metal wire, textile yarn or other materials or from a combination of such materials.

9. For the purposes of heading 8470, the term “pocket” applies only to devices not exceeding 170 x 100 x 45 mm.

10. For the purposes of heading 8485, the term additive manufacturing (also referred to as 3D printing) means the formation of physical objects based on a digital model by successively adding and layering, sealing and curing a material (e.g., metal, plastics or ceramics).

Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machines as described in heading 8485 are classified in that heading and no other heading of the Nomenclature.

11. (A) Notes 12(a) and 12(b) to Chapter 85 also apply to the terms “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this note and in heading 8486. However, in this note and in heading 8486, the term "semiconductor devices" also applies to photosensitive semiconductor devices and LEDs.

(B) In this note and in heading 8486, the term “plane display panel production” covers the fabrication of a flat panel of substrates. It does not cover the production of glass or the installation of printed circuit boards or other electronic components on flat panels. The term "flat display panel" does not apply to cathode ray tube technology.

(C) Heading 8486 also includes machinery and apparatus used exclusively or principally for:

(i) producing or eliminating defects in masks and patterns;

assemblies of semiconductor devices or electronic integrated circuits;

(iii) lifting, manipulating, loading or unloading boules, plates, semiconductor devices, electronic integrated circuits and flat display panels.

(D) Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machinery meeting the description in heading 8486 is classified in this heading and in no other heading of the Nomenclature.

Subheading notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. For the purposes of subheading 8465 20, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.

2. For the purposes of subheading 8471 49, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).

3. For the purposes of subheading 8481 20, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481.

4. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.

Additional notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheadings 8407 10 and 8409 10, the term “aviation engines” shall apply only to engines intended for assembly with an air or rotor.

2. В подсубпозицию 8471 70 300 0 также включаются устройства считывания компакт-дисков, являющиеся запоминающими устройствами вычислительных машин, которые предназначены для считывания сигналов с CD-ROM, аудиокомпакт-дисков и фотокомпакт-дисков и снабжены разъемом для наушников, регулятором громкости или кнопкой пуск/стоп.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheading 8482 10 900 1, the term “gross mass” means the total mass of the goods with all kinds of packaging materials and packagings ensuring their safety during storage and transport. The total weight of the goods does not include the mass of packaging materials or containers that are clearly suitable for reuse.

2. For the purposes of subheading 8415 81 001 0, the term “special production facilities” means premises in which the maintenance of precise values of temperature and humidity is due to the operational requirements of the equipment installed therein, such as machines, computers, switching equipment, surgical equipment, etc., or to the operations performed therein.

3. In subheadings 8427 20 190 1, 8427 90 000 1 and 8436 80 100 1, the date of manufacture shall be determined on the basis of the technical documentation of the manufacturer (technical passport, instruction manual) and the manufacturer's plate, which shall be fixed in a conspicuous, easily accessible place of the machinery and shall not be replaced during operation. If the manufacturer's technical documentation and the manufacturer's plate contain conflicting information about the date of manufacture or there is no information about the manufacturer of the equipment on the date of manufacture, then this technique is considered a technique, since the release of which more than 3 years have passed.

If the manufacturer's information indicates only the year of manufacture, then the date of manufacture of the equipment is considered 1 July of the year of manufacture; if the month and year of manufacture are indicated, the date of manufacture is the 15th day of the month specified in the manufacturer's information.

4. For the purpose of classification of goods in subheading 8482 10 900 1 in the states, whose territories constitute the customs territory of the Eurasian Economic Union, when applying the term "French border of the country of importation", the country of import is understood as the customs territory of the Eurasian Economic Union.

5. For the purpose of subheading 8407 10 000 3, the term “take-off power” means the maximum power developed by an aircraft piston engine.

“Take-off power” is specified in the technical documentation and (or) accompanying documents, measured in kilowatts or horsepower (1 kW corresponds to 1.35962 hp).

6. В подсубпозиции 8421 99 000 5 термин «элементы мембранные рулонного типа для фильтрования или очистки жидкостей» означает устройства цилиндрической формы, состоящие из:

- internal plastic perforated tube on which spirally wound membrane bags;

- drainage material located between membrane bags and glued to them on three sides.

The membrane package consists of a twice folded band of membrane containing an extruded grid inside.

At the ends of the membrane roll-type element, fixing discs and sealing cuffs can be installed.

7. For the purposes of subheading 8415 20 000 2, the term “in a single enclosure” refers to air conditioning units (air conditioners) in which all the elements are combined in a single enclosure, frame or platform.

The term "in a single housing" also applies to air conditioning units (air conditioners) in which the refrigeration compressor, which is part of a given air conditioning unit (air conditioner), is located separately, that is, not combined with the rest of the elements in one housing, on one frame or on one platform.