9010 60 — Projection screens

9010 Apparatus and equipment for photographic (including cinematographic) laboratories, not specified or included elsewhere in this Chapter; negatoscopes; projection screens: 9010 10 – apparatus and equipment for automatically developing photographic (including cinematographic) film or photographic paper in rolls or for automatically printing onto photographic paper in rolls 9010 50 – other apparatus and equipment for photographic (including cinematographic) laboratories; negatoscopes

9010 60 – projection screens 9010 90 – parts and accessories

(I) APPARATUS AND EQUIPMENT FOR PHOTOGRAPHIC (INCLUDING CINEMATOGRAPHIC) LABORATORIES, NOT SPECIFIED OR INCLUDED ELSEWHERE IN THIS CHAPTER This category includes: (A) Automatic machines for developing photographic film in rolls or for printing developed film on photographic paper in rolls. (B) Special tanks for developing films. They may be of metal, plastics, ceramics, etc.; they usually incorporate devices such as supporting rods, baskets for removing films from the solution. Some developing tanks are also used for washing, fixing and rinsing films. (C) Special dishes (of plastics, stainless steel, enamelled sheet steel, etc.) clearly designed for use in photography, but excluding articles which can also be used for other purposes (e.g., for general use in laboratories or hospitals). (D) Negative washing tanks, including rotary washers. (E) Print dryers, glazers and dryer-glazers (single-sided, double-sided, rotary types, etc.); drying machines (hand-operated, etc.); rubber squeegee rollers; polished stainless steel plates and chromium-electroplated plates, clearly designed for fitting in these articles or used separately. (F) Printing frames, including vacuum printing frames (of metal or of metal and wood), for contact printing; printing machines (for professional or amateur photographers, etc.); illuminated frames, without developing device, for exposure only. (G) Film-cutting machines and apparatus of the kind used in photographic (including cinematographic) laboratories. (H) Special retouching frames for negatives. (IJ) Presses for dry transfer of pigment prints, for use in photography. (K) Specialised machines and apparatus used in cinematographic laboratories, such as: (1) film developing machines, whether or not automatic; (2) machines for slitting or trimming film (e.g., for cutting 35 mm film into two 16 mm films); (3) cinematographic printers and cinematographic enlargers and reducers (optical printers); (4) machines producing optical effects; (5) sound-control units for editing and synchronising sound films;

(6) Recording apparatus which reproduces on paper tape a "slowed-down" and enlarged image of the sound track on the film, for use in synchronising and dubbing; (7) film-cleaning machines; machines for treating worn negatives before reprinting; combined cleaning and treating machines; negative-cleaning machines; (8) waxing machines for applying a thin coat of wax along both edges of the emulsion-coated side of the film; (9) splicers (joining presses) (hand- or pedal-operated, etc.); (10) film-editing equipment. It may be fitted with a sound head and a viewing head. Such apparatus may be used, for example, for synchronising picture and sound. Separately presented viewing heads and devices fitted with sound heads, which are used together with film viewers on synchronising tables, also fall in this heading. However, separately presented sound heads are excluded from this heading (heading 8522); (11) machines for numbering film copies by perforation; (12) film-handling editing tables; they are fitted with reel rewinding devices. Special film rewinders for rewinding negatives (e.g., after printing); film measurers and footage counters for checking the length of films (separately presented counting mechanisms are excluded, see heading 9029); (13) titling machines; (14) film viewers for editing printed cinematographic film. These viewers may be combined with sound-recording or sound-reproducing apparatus. (L) Viewers for still images, used for examining photographic negatives in photographic laboratories. (M) Specialised equipment used in reproduction work (other than photocopying apparatus of heading 8443), e.g., apparatus for developing specially sensitised paper by ammonia vapour. (II) NEGATOSCOPES Negatoscopes are used mainly for examining medical radiographs or X-ray photographs. They may be of very different types, ranging from wall-mounted light boxes to automatic radiograph viewers fed from a cassette. (III) PROJECTION SCREENS These screens are used in cinemas, schools, lecture halls, etc. They include projection screens for three-dimensional presentation; also portable screens, rolled up and packed in a case or contained in boxes, for mounting on tripods, on tables or for suspension from the ceiling.

They are often made of fabric coated with white or silver paint or with glass beads (microspheres), or of sheets of plastics; these fabrics or sheets are usually perforated. However, to fall in this heading they must be clearly identifiable (e.g., by means of borders or rims, eyelets for suspension). PARTS AND ACCESSORIES Subject to the provisions of Notes 1 and 2 to this Chapter (see the General Explanatory Note), parts and accessories identifiable as suitable for use solely or principally with the apparatus and equipment of this heading are also classified here. This heading also excludes: (a) photographic studio equipment (including cinematographic studios), such as lighting apparatus, reflectors, floodlights, electric lamps and tubes of all kinds, sound-effects equipment, microphone booms, scenery, etc.; these fall in their appropriate headings; (b) screens for half-tone or similar printing (headings 3705, 9001, 9002, etc., as the case may be); (c) machines of all kinds for cutting paper or paperboard (heading 8441); (d) apparatus for projecting or drawing mask patterns on sensitised semiconductor materials (heading 8486); (e) loudspeakers, microphones and audio-frequency electric amplifiers, other than those presented with any of the apparatus of this heading and forming an integral part thereof (heading 8518); (f) cameras for recording documents on microfilm, microfiche or other microforms (heading 9006); (g) X-ray fluorescent and intensifying screens (heading 9022); (h) exposure calculating discs and rules (heading 9017); exposure meters, photometers, densitometers, colour temperature meters (heading 9027); (ij) hand-operated stamps for numbering (heading 9611).

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) articles used in machinery, appliances or for other technical purposes, made of vulcanised rubber other than hard rubber (heading 4016), natural or composite leather (heading 4205) or textile material (heading 5911);

(b) support belts or other supporting articles of textile materials, the purposeful effect of which on the supported or fixed organ is only due to their elasticity (for example, bandages for pregnant women, chest bandages, abdominal bandages, joint or muscle locks) (Section XI);

(c) refractory articles of heading 6903; ceramic articles for laboratory, chemical or other technical purposes of heading 6909;

(d) optically raw glass mirrors of heading 7009 or of base or precious metal mirrors other than optical elements (heading 8306 or Chapter 71);

(e) the goods of heading 7007, 7008, 7011, 7014, 7015 or 7017;

(f) parts of general use referred to in Note 2 to Section XV of base metals (Section XV) or similar products of plastics (Chapter 39); however, articles specifically intended for use exclusively in implants used in medicine, surgery, dentistry or veterinary medicine are to be classified in heading 9021;

(ж) насосы с измерительными приборами товарной позиции 8413; счетное или контрольное оборудование, приводимое в действие силой тяжести взвешиваемого груза, или поставляемые отдельно разновесы для весов (товарная позиция 8423); подъемное или погрузочно-разгрузочное оборудование (товарные позиции 8425 – 8428); машины всех видов для резки бумаги или картона (товарная позиция 8441); приспособления для регулирования положения обрабатываемых деталей или инструмента на станках или водоструйных резательных машинах товарной позиции 8466, включая приспособления с оптическими элементами для считывания показаний приборов (например, «оптические» делительные головки), но за исключением тех устройств, которые сами по себе являются исключительно оптическими приборами (например, юстировочные телескопы); счетные машины (товарная позиция 8470); клапаны и другая арматура товарной позиции 8481; машины и аппаратура (включая аппаратуру для проецирования или нанесения рисунка маски на сенсибилизированные полупроводниковые материалы) товарной позиции 8486;

(з) прожекторы или фары, используемые на велосипедах или моторных транспортных средствах (товарная позиция 8512); портативные электрические фонари товарной позиции 8513; кинематографические аппараты для записи, воспроизведения или повторной записи звука (товарная позиция 8519); звуковые головки (товарная позиция 8522); телевизионные камеры, цифровые камеры и записывающие видеокамеры (товарная позиция 8525); радиолокационная аппаратура, радионавигационная аппаратура или радиоаппаратура дистанционного управления (товарная позиция 8526); соединители для волокон оптических, волоконно-оптических жгутов или кабелей (товарная позиция 8536); цифровые аппараты управления товарной позиции 8537; лампы герметичные направленного света товарной позиции 8539; волоконно-оптические кабели товарной позиции 8544;

(ij) floodlights or headlights of heading 9405;

(k) articles of Chapter 95;

(l) monopores, bipeds, tripods and similar articles of heading 9620;

(m) volume measuring tanks classified by the material from which they are made; or

(n) coils, reels or similar carriers (which are to be classified according to the material of which they are made, for example, in heading 3923 or in section XV).

2. Subject to the provisions of Note 1, parts and accessories to machinery, apparatus, tools or articles in this Chapter shall be classified according to the following rules:

(a) parts and accessories which are goods falling in one of the headings of this Chapter or of Chapter 84, 85 or 91 (other than heading 8487, 8548 or 9033) are in all cases classified in the relevant headings;

(b) other parts and accessories intended to be used exclusively or principally in a particular type of machine, tool or apparatus or in several machines, tools or apparatus falling under the same heading (including machinery, tools or apparatus of heading 9010, 9013 or 9031) are included with those machines, tools or apparatus;

(c) all other parts and accessories fall in heading 9033.

3. Notes 3 and 4 to section XVI also apply to this chapter.

4. Heading 9005 does not include telescopic sights for mounting weapons, telescopic periscopes for submarines or tanks, or sight-tubes fitted to machines, devices, instruments or apparatus of this Chapter or Section XVI; such telescopic sights and sight-tubes are classified in heading 9013.

5. Measuring or control optical devices, devices or machines which, but for this note, could be included in both heading 9013 and heading 9031 are classified in heading 9031.

6. For the purposes of heading 9021, the term “orthopedic devices” means devices for:

prevention or correction of bodily deformities; or

Supporting or fixing body parts after illness, surgery, or injury.

Orthopedic appliances include shoes and special insoles made for the correction of orthopedic conditions, provided that they are either (1) made to order standards, or (2) mass-produced, represented by one object and not in pairs and designed to be equally suitable for any foot.

7. Heading 9032 covers only:

(a) instruments and devices for the automatic control of the flow rate, level, pressure or other variable parameters of liquids or gases, or for the automatic control of temperature, whether or not their action is based on an electrical phenomenon varying according to the parameter to be regulated, which are designed to bring this parameter to the desired value and to keep it stable against disturbances, constantly or periodically measuring the actual value; and

(b) automatic regulators of electrical quantities and devices or devices for the automatic regulation of non-electrical quantities, the operation of which is based on an electrical phenomenon varying depending on the parameter to be regulated, which are designed to bring this parameter to the desired value and keep it stable from disturbances, constantly or periodically measuring the actual value.

Additional note

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. Термин «электронные» в подсубпозициях 9015 10 100 0, 9015 20 100 0, 9015 30 100 0, 9015 40 100 0, 9015 80 110 0, 9015 80 190 0, 9024 10 110 0, 9024 10 130 0, 9024 10 190 0, 9024 80 110 0, 9024 80 190 0, 9025 19 200 0, 9025 80 400 0, 9026 10 210 0, 9026 10 290 0, 9026 20 200 0, 9026 80 200 0, 9027 10 100 0, 9030 20 910 0, 9030 33 100 0, 9030 89 300 0, 9031 80 320 0, 9031 80 340 0, 9031 80 380 0 и 9032 10 200 0 означает приборы и аппараты, которые включают в себя одно или несколько изделий товарной позиции 8540, 8541 или 8542. Однако это не должно относиться к изделиям товарной позиции 8540, 8541 или 8542, функцией которых является исключительно выпрямление тока или которые входят в состав блока питания приборов или аппаратов.