3214
Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings; non-refractory surfacing preparations for façades, indoor walls, floors, ceilings or the like
The heading name is in English, from the EU Combined Nomenclature. The ten-digit code names are machine-translated: that detail belongs to the EAEU tariff alone and no official English version exists. A few are still in Russian because our quality check rejected their translation. Customs goes by the Russian text of the EAEU tariff; translations have no legal force.
Codes inside the heading, and their duty rates
5 codes — the whole list. The duty rate is quoted as it stands in the tariff; the customs processing fee and VAT are counted separately.
| Code | Name | Duty |
|---|---|---|
| 3214 10 100 1 | Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings: glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics: polyurethane mounting foam in aerosol containers | 5% |
| 3214 10 100 9 | Glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics; painters' fillings: glaziers' putty, grafting putty, resin cements, caulking compounds and other mastics: other | 5% |
| 3214 10 900 0 | Painter's fillings | 5% |
| 3214 90 000 1 | Other: for the manufacture of aircraft engines (CCT EAEU note 5) | 0% |
| 3214 90 000 9 | Other: other | 5% |
Classification rulings on this heading
Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.
5 classification rulings on codes in this heading. Below are 4 of them, across 2 codes inside the heading.
3214 10 100 9
Grounds: GRI 1 and 6
Mastic adhesive ".." in the form of a viscous paste-like homogeneous mass from yellow to brown, which includes: synthetic resins (phenoloformaldehyde resin, polyvinyl chloride resin, epoxy-diane uncured) 15.7% polychloroprene rubber 7.1%, organic solvents (toluene, acetone, gasoline) 52.8%, mineral fillers (chael) 24.4%.
Full descriptionCollapse the description
It is used for gluing linoleum, PVC and ceramic tiles, parquet, carpet, rubber coatings, sealing gaskets on concrete, wooden surfaces, as well as on fiberboard, chipboard and drywall. Method of application: before use, mix the mastic thoroughly, on surfaces cleaned of dust and dirt using a spatula or brush with a hard pile, apply an even layer of mastic at the rate of 100-200 ml per 1 square meter, withstand 5-10 minutes, then press the adhesive material for 1-2 minutes. Packed with 20 liters in a eurobucket equipped with a lid, marked with information for the consumer.
3214 90 000 9
Grounds: GRI 3(b) and 6
The drug in the form of a homogeneous viscous mass from colorless to light yellow color, which includes: polymethylene polyphenyl polyisocyanate (CAS No. 9016-87-9) 20%, polyetherpolyol (CAS No. 9082-00-2) 45%, recinolein (CAS No. 2540-54-7) 5%, ethyl acetate (CAS No. 141-78-6) 30%.
Full descriptionCollapse the description
The drug is applied with brushes, rollers or spraying method and is used as a finishing coating for waterproofing building structures from metal, concrete and other porous materials, when applied to the surface of building structures forms an elastic, durable, chemical-resistant, waterproof film. Packed with a net weight of 5, 10 or 20 kg in metal buckets, marked with a curing accelerator in a bottle of 0.1 liters.
3214 10 100 9
Grounds: GRI 1 and 6
Polyurethane sealant is a three-component system (component "A", component "B", component "C"), designed to seal seams, cracks, joints.
Full descriptionCollapse the description
The composition of the component "A" (uniform opaque mass of light yellow) includes: polymethylene polyphenyl polyisocyanate (CAS No. 9016-87-9) 40%, polyesterpolyol (CAS No. 9082-00-2) 60%.
The composition of the component "B" (uniform transparent viscous mass of light yellow) includes: recinolein (CAS No. 2540-54-7) 90%, glycerin (CAS No. 56-81-5) 10%.
The composition of the component "C" (uniform viscous mass of gray color) includes: quenched lime (CAS No. 1305-62-0) 98%, silica (CAS No. 7631-86-9) 2%. Before use, to obtain the finished drug, it is necessary: to add water in a ratio of 1: 1 to the component "C", then mix the components "A", "B" and "C" in a ratio of 1.5: 2: 1. Component "A", component "B" and component "C" are supplied together and are defined as components that complement each other, packaged: component "A" in buckets of metal net weight of 6 kg, component "B" in buckets of metal net weight of 8 kg, component "C" in buckets of plastic net weight of 2 kg, marked.
3214 90 000 9
Grounds: GRI 1 and 6
Polyurethane primer is a two-component preparation (component "A", component "B") in the form of a homogeneous low-viscosity transparent mass.
Full descriptionCollapse the description
The composition of the component "A" (uniform low-viscosity transparent mass with a brown hue) includes: polymethylene polyphenyl polyisocyanate (CAS No. 9016-87-9) 55%, ethyl acetate (CAS No. 141-78-6).
The composition of the component "B" (uniform low-viscosity transparent mass with a yellow hue) includes: recinolein (CAS No. 2540-54-7) 40%, polyesterpolyol (CAS No. 9082-00-2) 10%, ethyl acetate (CAS No. 141-78-6) 50%. Before use, to obtain the finished drug, it is necessary to mix component "A" and component "B" in a ratio of 1: 1 by weight. The finished preparation is applied to the surface of concrete or other porous bases (brick, plaster, foam blocks, wood) with brushes, rollers or by spraying. It is used for hardening, dusting, hydrophobization of concrete, as a soil for other polymer coatings, anticorrosion protection of metal structures, as well as various porous bases.
When applied to the surface of concrete, plaster, brick, wood and other porous building materials, it impregnates the surface of the base, cures and forms a durable waterproof polymer layer 0.5-5 mm thick (on porous bases up to 3-5 cm). Component "A" and Component "B" are supplied jointly and are defined as complementary components, packaged in 9 or 18 kg polyethylene canisters or in metal buckets of 4.5 kg each marked.
HS code opinion
Tariff and non-tariff restrictions, grounds for the code under the GRI and EEC rulings.
HS code opinion →Neighbouring headings in chapter 32
For bans, requirements and permits on the code, check the goods.