4012 11 000 0 — Retreaded or used pneumatic tyres of rubber; solid or cushion tyres, tyre treads and tyre flaps, of rubber: retreaded tyres: for motor cars (including station wagons and racing cars)

4012 Retreaded or used pneumatic tyres and casings of rubber; solid or cushion tyres and casings, tyre treads and tyre flaps, of rubber (+): – Retreaded tyres and casings: 4012 11 – – Of a kind used on motor cars (including station wagons and racing cars) 4012 12 – – Of a kind used on buses or motor vehicles for the transport of goods 4012 13 – – Of a kind used on aircraft 4012 19 – – Other 4012 20 – Used pneumatic tyres and casings 4012 90 – Other

The heading covers retreaded pneumatic tyres and casings of rubber and used pneumatic tyres and casings of rubber, suitable either for further use or for retreading. Solid tyres and casings are fitted, for example, on wheeled toys and mobile furniture. Semi-pneumatic tyres and casings, which are solid tyres having a sealed internal air space, are used on wheelbarrows and trolleys. Tyre treads are bonded to the carcasses of pneumatic tyres and casings and usually have a ribbed pattern. They are used for retreading pneumatic tyres and casings. The heading also covers interchangeable tyre treads, which are made in the form of rings and fitted to the carcass of the tyre or casing for which they are intended. Tyre flaps are used to protect the inner tube from the metal rim or the ends of the spokes. The heading excludes solid or semi-pneumatic tyres and casings of products of Chapter 39, for example, of polyurethane (generally Section XVII), and worn-out tyres and casings not suitable for retreading (heading 4004). Subheading Explanatory Notes. Subheadings 4012 11, 4012 12, 4012 13, 4012 19 and 4012 20 For the purposes of subheadings 4012 11, 4012 12, 4012 13 and 4012 19, the expression "retreaded tyres and casings" means tyres and casings from whose carcass the worn tread has been removed and on which a new tread is formed by one of two methods: (i) the tread is moulded from unvulcanised rubber on the tyre carcass, or (ii) a vulcanised tread is bonded to the carcass by means of a vulcanisable rubber strip. Such tyres and casings may be tyres and casings on which only the tread has been renewed, on which the tread and the upper parts of the sidewalls have been renewed, or on which the tread and the sidewalls (wholly or partly) have been renewed. Used tyres and casings of subheading 4012 20 may have been regrooved, whereby the worn (but still visible) tread grooves are deepened by cutting. Such regrooving is normally carried out on tyres and casings used on heavy vehicles (for example, buses or motor vehicles for the transport of goods). Used tyres and casings which have been regrooved do not fall in subheadings 4012 11, 4012 12, 4012 13 and 4012 19. Tyres and casings of subheadings 4012 11, 4012 12, 4012 13, 4012 19 and 4012 20 may also have been siped, whereby transverse and

diagonal grooves are added by cutting to the existing tread pattern. Such siping does not affect the classification of retreaded tyres and casings in subheadings 4012 11, 4012 12, 4012 13, 4012 19 or of used tyres and casings in subheading 4012 20. However, new pneumatic tyres and casings which have been siped are classified in the appropriate subheadings of heading 4011.

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. Unless otherwise specified in the context, throughout the Nomenclature, the terms “rubber” and “rubber” mean the following products, whether vulcanized or non-volcanized, solid or non-solid: natural rubber, balata, gutta perch, guayula, chicle and similar natural resins, synthetic rubber, oil-derived factis and the same materials in regenerated form.

2. This group does not include:

(a) goods of Section XI (textiles and textile articles);

(b) Shoes or parts thereof of Chapter 64;

(c) headgear or parts thereof (including bathing caps) of Chapter 65;

(d) mechanical or electrical devices, or parts thereof of Section XVI (including electrical goods of all kinds), of solid rubber;

(e) articles of Chapter 90, 92, 94 or 96; or

(f) articles of Chapter 95 (other than sports gloves, gloves, mittens and articles of headings 4011 to 4013).

3. For the purposes of headings 4001 to 4003 and 4005, the term “primary forms” means the following forms:

(a) liquids and pastes (including latex subvulcanized or non-vulcanized and other dispersions and solutions);

(b) irregularly shaped blocks, chunks, piles, powders, granules, crumbs and similar bulk forms.

4. In Note 1 to this Chapter and in heading 4002, the term synthetic rubber means:

(a) unsaturated synthetic substances irreversibly transformed by sulfur vulcanization into non-thermoplastic substances, which do not rupture at a temperature of 18–29 °C when stretched 3 times their original length, and, when stretched 2 times within 5 minutes, return to a length not exceeding the original length by more than one and a half times. In this test, it is allowed to add substances necessary for the formation of cross-links, in particular, activators or accelerators of vulcanization. Substances listed in note 5 (B) (ii) and (iii) are also allowed. However, any substances not intended for cross-linking, such as diluents, plasticizers and fillers, shall not be allowed;

(b) thioplasty (TM); and

(c) natural rubber modified by grafting or mixing with plastics, depolymerized natural rubber, mixtures of unsaturated synthetic substances with saturated synthetic high molecular weight polymers, provided that all of the above products meet the requirements of paragraph 4(a) above of this note for vulcanization, elongation and resizing.

5. (A) Headings 4001 and 4002 do not include rubber or a mixture of rubbers if they were mixed with:

(i) vulcanizing agents, accelerators, moderators or activators (other than those which have been added to prepare dulacanized rubber latex);

pigments or other colouring agents other than those used for identification purposes only;

(iii) plasticizers or fillers (other than mineral oil in the case of oil-filled rubber), reinforcing agents, organic solvents or any other substances other than those referred to in paragraph 5(B).

(B) The presence of the following substances in rubber or a mixture of rubbers shall not affect their classification as heading 4001 or 4002 provided that such rubber or a mixture of rubber retains its essential property of the raw material:

(i) emulsifiers or antiadhesives;

(ii) small amounts of degradation products of emulsifiers;

(iii) very small amounts of heat-sensitive agents (mainly for the preparation of thermally sensitive rubber latexes), cationic surfactants (usually for the preparation of electropositive rubber latexes), antioxidants, coagulants, rubber-to-crumb agents, frost-resistant agents, peptisers, anticoagulants, stabilizers, viscosity-regulating agents, or similar special-purpose additives.

6. For the purposes of heading 4004, the term “waste, trimmings and scraps” means waste, trimmings and scraps produced in the manufacture or treatment of rubber and articles thereof which are absolutely unusable as such by cuts, wear or other causes.

7. Threads consisting entirely of vulcanized rubber having a cross-sectional dimension greater than 5 mm are classified as strips or ribbons, rods or profiles in shape in heading 4008.

8. Heading 4010 covers conveyor belts, drive belts or belting of fabric impregnated, coated or duplicated with rubber or of fabric made of textile yarn or cord impregnated or coated with rubber.

9. For the purposes of headings 4001, 4002, 4003, 4005 and 4008, the terms “plates”, “sheets” and “bands or tapes” mean only plates, sheets and strips or ribbons and blocks of regular geometric shape, not cut or cut into rectangular (including square) shapes, being or not finished articles with embossed or unembossed or otherwise treated surface, other than materials cut into pieces of another shape or subjected to further processing.

For the purposes of heading 4008, the terms “bars” and “shaped profiles” mean only articles not cut or cut in length with a treated or untreated surface but without further treatment.

Additional note

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. Sleeves, gloves or mittens impregnated or coated with porous rubber, in which textile materials, woven or machine or hand knitted, felt or felt or nonwoven materials are presented merely for reinforcement purposes, belong to Chapter 40, even if they:

- made of textile materials, woven or machine or hand knitted (other than those of heading 5906), felt or felt or nonwoven materials impregnated or coated with porous rubber, or

- made of unimpregnated or uncoated textile materials, woven or machine or hand knitted, felt or felt or nonwoven materials and subsequently impregnated or covered with porous rubber.

(Note 3 (c) to chapter 56 and note 5, last paragraph, to chapter 59.)