Skip to content
IMEXP.RU
EAEU HS code

7326 90 980 7 — Other articles of iron or steel: other: other articles of iron or steel: other: other: other

Other articles of iron or steel: other: other articles of iron or steel: other: other: other

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

Duty rate
7.5%

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit
Not applicable
Requirements and measures
19

None: EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT
VAT-exempt or 22%

Exempt if it is a medical device on the exemption list. Otherwise 22%.

Where it sits in the nomenclature

Section XV. Base metals and articles of base metal

  1. 73Articles of iron or steel
  2. 7326Articles of iron or steel, n.e.s. (excl. cast articles)
  3. 7326 90Articles of iron or steel, n.e.s. (excl. cast articles or articles of iron or steel wire)
  4. 7326 90 98Other: other articles of iron or steel: other
  5. 7326 90 980 7you are here

Compare the description of your goods with the neighbouring codes on the subheading line above.

Explanatory notes to heading 7326 3 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

7326 Other articles of ferrous metals (+): - forged or stamped, but without further processing: 7326 11 - grinding balls and similar products for mills 7326 19 - - other 7326 20 - articles of wire made of ferrous metal 7326 90 - other

This heading covers all articles of iron or steel obtained by forging or punching, by cutting or stamping or by other processes such as folding, assembling, welding, turning, rolling or perforating, other than articles included in the preceding headings of this Chapter or covered by Note 1 to Section XV, or included in Chapter 82 or 83, or more specifically covered elsewhere in the Nomenclature. The heading includes: (1) Horseshoes; heel and toe plates for footwear, with or without fixing studs; climbing irons for poles; ventilation grilles; Venetian blinds; fixing rings for helmets and hard hats; steel accessories for electrical wiring (e.g., props, brackets, cantilevers); fittings for suspending or connecting insulator strings (suspension rods, yokes, consoles, eyes or rings with pin connections, ball couplings, hangers, tension clamps, etc.); uncalibrated steel balls (see Note 6 to Chapter 84); fence posts, tent poles, tethering pegs for livestock, etc.; rings for garden fences, supports for trees, peas, etc.; turnbuckles for tying wire fences; roofing tiles (other than those used in building and falling in heading 7308) and gutters; clamping rings or collars (hose clips) used for fixing flexible tubes or hoses to rigid pipes, taps, etc.; hangers, stays and similar supports for fixing piping (other than clamps and other devices designed for assembling tubular elements of metal structures, which fall in heading 7308); measures of capacity (other than household measures – heading 7323); bushes; road bollards; forged hooks, e.g., for cranes; snap hooks for any purpose; ladders and step-ladders; trestles; chaplets or core supports (other than moulding nails – see heading 7317) for foundry mould cores; artificial flowers or foliage of iron or steel (but excluding articles of heading 8306 and imitation jewellery of heading 7117). (2) Articles of wire, such as snares, traps, mousetraps, eel pots, etc.; wire ties for fodder, etc.; rim tapes for tyres; paired or twin wire for healds of textile machinery, obtained by soldering two single wires together; nose rings for animals; mattress hooks, butchers' hooks, gutter hangers, etc.; waste-paper baskets. (3) Certain tool boxes and cases, not specially shaped or fitted to contain particular tools with or without their accessories (see the Explanatory Note to heading 4202); boxes for herbaria and other collections, trinket boxes; vanity cases or powder boxes; cigarette cases, tobacco boxes, etc., but excluding containers of heading 7310, household containers (heading 7323) and ornaments (heading 8306).

The heading also covers vacuum cup holders (suction cups), consisting of a base, a handle, a lever and a rubber disc, which are designed for temporarily gripping an object (glass, in particular) so that it can be moved. The heading excludes forgings which constitute articles falling in other headings of the Nomenclature (e.g., identifiable parts of machinery or mechanical appliances), or rough forgings which require further working, while retaining the essential character of the finished articles. The heading also excludes: (a) Articles of heading 4202. (b) Reservoirs, tanks, vats and similar containers of heading 7309 or 7310. (c) Cast articles of iron or steel (heading 7325). (d) Office or stationery equipment, e.g., book-ends, inkwells, pen-stands, blotting pads, paperweights and stands for office stamps (heading 8304). (e) Statues, vases, urns and crosses used for decorative purposes (heading 8306). (f) Large-scale shelving for permanent installation in shops, workshops, storehouses, etc. (heading 7308) and shelved furniture of heading 9403. (g) Wire frames for the manufacture of textile or paper lampshades (heading 9405). Subheading Explanatory Note. Subheadings 7326 11 and 7326 19 After forging or stamping, the articles of these subheadings may be subjected to the following finishing or surface treatment: removal of burrs and other stamping defects by rough cleaning, forging, chipping or filing, removal of scale by pickling in acid; simple sand-blasting; rough scalping or rough whitening and other operations designed solely to reveal defects in the metal; application of rough coatings of graphite, oil, tar, red lead or similar products intended to protect against corrosion; stamping, punching, printing, etc., of simple inscriptions such as trade marks.

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 73 — Articles of iron or steel 3 items

Notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72.

2. In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

Additional note

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. Drilling pipes are used for descent into a borehole and lifting a rock-destroying tool, transferring rotation, creating an axial load on the tool, supplying a washing fluid or compressed air to the bottom. There are ordinary, weighted and leading drill pipes.

Ordinary drill pipes (heading 7304) - usually one-piece round cross-section, are connected by means of drill locks or semi-locks with special large conical threads.

Weighted drill pipes (heading 8431) are usually round or square cross-sections with an increased wall thickness; they are also connected by thread and serve to increase the stiffness of the lower part of the column and to place a load on the rock-destroying tool.

Leading drill pipes (heading 8431) - multifaceted cross-section, are placed at the top of the column of drill pipes and transmit it rotation from the rotator of the drilling rig.

EEC classification decisions (2)

Binding in all EAEU member states: if the goods match the description, the decision fixes the code

Classification rulings for this code (23)

Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.

The workbench (desktop) is a metal structure made of ferrous metals and aluminum alloy, designed to fix a stationary electrocution saw on it (it is not included in the delivery), with the help of which metal, wood and other materials are processed on the workbench.

Full description

Structurally, the workbench consists of the base of the desktop, made of aluminum alloy (1 pcs.), tubular support unregulated steel legs (3 pcs.); tubular support adjustable steel leg (1 pcs.); steel tubular extensions of the desktop with side supports for workpiece (2 pcs.); a set of fasteners (2 pcs.).

The package includes end wrench "3 in 1" (end wrench 13 mm / key / hexagon 4 mm / cruciform screwdriver) - 1 pc.; screw with hexagonal head (M8 x 45) - 4 pcs.; lining washer - 4 pcs. The weight of ferrous metal workbench elements is about 12 kg (63.5%), of aluminum glory about 6.9 kg (36.5%).

Technical characteristics: the size of the workbench folded 1578x140x190 mm, the height of the assembled workbench 824 mm, load up to 250 kg, weight 18.9 kg, packed in a cardboard box.

GRI 1 and 6

Металлическое изделие цилиндрической формы (высотой в собранном виде 190 см, диаметром 40 см) с декоративным элементом в верхней части конструкции, представляет собой садовую арку, служащую для поддерживания стеблей вьющихся растений.

Full description

Возможна установка садовой арки, как в больших цветочных горшках, так и на участках сада путем втыкания концевых частей арок в грунт или в землю. Конструкция садовой арки включает в себя расположенные в поперечных плоскостях 3 яруса замкнутой округлой формы (образованные соединением стальных трубок, диаметром 13 мм), которые объединены вертикально расположенными стальными трубками (диаметром 13 мм). Все элементы конструкции изготовлены из холоднокатанной стали (сталь SPCC) методом штамповки и последующего сгибания для придания им различной формы и имеют порошковое покрытие.

Изделие весом 1,82 кг поставляется в разобранном виде в комплекте с крепежными изделиями (12 шурупов) и инструкцией по сборке; упаковано в прозрачный пакет с этикеткой.

GRI 1 and 6

Широкополосный листовой поглотитель СВЧ энергии (далее – Поглотитель) является тонким, гибким, листовым материалом, который применяется в качестве сверхширокополосного термостойкого сверхвысокочастотного поглотителя энергии (СВЧ поглотитель электромагнитных волн).

Full description

Поглотитель изготавливается из силиконовой резиновой смеси методом высокотемпературного прессования (формование под прессом горячей вулканизации). В состав смеси входят порошок железа карбонильного с размерами частиц менее 5 микрометров (85% массы) и силиконовая резина (15% массы). В процессе изготовления образуется тонкий гибкий лист с размерами 250х250х1 мм. Основные свойства по поглощению радиоволн обеспечивает большое содержание железа карбонильного, силиконовая резина является связующим компонентом. Поглотитель используется в радиолокационном, радиоэлектронном, измерительном оборудовании, безэховых камерах и т.п. для поглощения энергии электромагнитных волн в диапазоне частот от 0,1 до 50 ГГц (коэффициент поглощения (ослабления) до 28 дБ).

GRI 1, 3(b) and 6

Forging according to the sketch is a product of corrosion-resistant steel with a carbon content of not more than 0.08%, chromium 17.0-19.0%, nickel 9.0-11.0%, titanium not more than 0.7%.

Full description

It has the shape of a cylinder with a diameter of 527 mm, with a hole with a diameter of 267 mm, a height of 420 mm. The product is made of blacksmith ingot, which has undergone the following processing: sludge on the blacksmith press of the heated workpiece; firmware on the blacksmith press; free forging; heat treatment in the furnace to obtain the required mechanical properties; mechanical treatment of the surface of the part on the metal-cutting lathe (cutting) to give the product a geometry close to the contour of the final product.

Designed for the manufacture of feed water pipe for high pressure heater for power plants. For the production of the final product (pipe of feed water), the forging will be subjected to further machining with the removal of metal from the workpiece on the lathe (changes are subject to the outer surface of the forging, the inner surface of the hole, the end side is shaped to pair with the body of the high pressure heater), as a result of which the workpiece undergoes significant changes.

GRI 1 and 6

Forging according to the sketch is a product of corrosion-resistant steel with a carbon content of not more than 0.08%, chromium 17.0-19.0%, nickel 9.0-11.0%, titanium not more than 0.7%.

Full description

It has the shape of a cylinder with a diameter of 395 mm with a hole with a diameter of 265 mm, a height of 220 mm. The product is made of blacksmith ingot, which has undergone the following processing: sludge on the blacksmith press of the heated workpiece; firmware on the blacksmith press; free forging; heat treatment in the furnace to obtain the required mechanical properties; mechanical treatment of the surface of the part on the metal-cutting lathe (cutting) to give the product a geometry close to the contour of the final product.

Designed for the manufacture of an exit pipe for a high pressure heater for power plants. For the production of the final product (exit pipe), the forging will be subjected to further machining with the removal of metal from the workpiece on the lathe-screw, radial-drilling machines, as a result of which the workpiece undergoes significant changes.

GRI 1 and 6

Forging according to the sketch is a product of corrosion-resistant steel with a carbon content of not more than 0.08%, chromium 17.0-19.0%, nickel 9.0-11.0%, titanium not more than 0.7%.

Full description

It has the shape of a cylinder with a diameter of 330 mm, with a hole with a diameter of 121 mm, a height of 285 mm. The product is made of blacksmith ingot, which has undergone the following processing: sludge on the blacksmith press of the heated workpiece; firmware on the blacksmith press; free forging; heat treatment in the furnace to obtain the required mechanical properties; mechanical treatment of the surface of the part on the metal-cutting lathe (cutting) to give the product a geometry close to the contour of the final product.

Designed for the manufacture of a steam input pipe for a high pressure heater for power plants. For the production of the final product (steam input pipe), the forging will be subjected to further machining with the removal of metal from the workpiece on the lathe-screw, radial-drilling machines, as a result of which the workpiece undergoes significant changes.

GRI 1 and 6

A product consisting of thirteen threaded spikes (made of ferrous metals by forging, stamping, heat treatment, size: length 54.67 mm, diameter 4.69 mm, cap diameter 9.84 mm), fixed using metal nuts on the bottom of the polypropylene plate (size: length 297 mm, width 132 mm), to the upper side of which are attached two straps of polyester with plastic buckles for fixing the product on the sole of the user's shoes.

Full description

Designed for the impact of spikes, which are the working part of the product, on the surface of the lawn in order to aerate it (saturation with air, oxygen), as well as to move the user on the filling floor during construction (repair) work. The product is delivered in disassembled form, the package includes 2 plates, 26 spikes, 26 nuts, 4 straps, 4 buckles (in order to assemble two products for one pair of shoes), 1 key, packed in a colored box.

GRI 1, 3(b) and 6

The product of cylindrical shape, made of steel mesh, is designed to purify water from rust, sand, silt, etc.

Full description

Installed in the water purification filter (not included in the package), which is installed in cold and hot water supply systems. The product is made by cutting the mesh to the desired size, folding it into a cylinder of the required diameter and subsequent welding on top. The ends of the grid are not processed during production. Bottom, cover, other elements of the product are absent.

Technical characteristics: length 45.5 mm; diameter - 17.5 mm; dimensions of holes in the grid - 430 microns, product weight - 1.52 grams.

GRI 1 and 6

Шары мелющие стальные для шаровых мельниц изготовлены методом поперечно-винтовой горячей прокатки на шаропрокатном стане с последующей термической обработкой (закалкой и отпуском).

Full description

Технологический процесс производства шаров мелющих стальных заключается в нагреве цилиндрической стальной заготовки в нагревательной печи до температуры 900-1100 градусов, прокатки заготовки в клети шаропрокатного стана между двумя вращающимися валками, на поверхности которых выполнены винтовые ручьи. В результате прокатки длинная цилиндрическая заготовка, двигаясь непрерывно, деформируется таким образом, что получается ряд шаровых профилей, которые при выходе из валков по желобу скатываются в бассейн с водой, где они интенсивно охлаждаются и закаливаются.

Характеристики шара: Условный диаметр (округленный до стандартного ряда диаметр шара)- 100 мм. Номинальный диаметр 104,0 мм. Предельное отклонение от номинального диаметра + 4,0 мм. Группа твердости- 4. Номинальная расчетная масса шара 4,62 кг. Маркировка отсутствует.

GRI 1 and 6

Forging according to the sketch is a product of corrosion-resistant steel with a carbon content of not more than 0.08%, chromium 17.0-19.0%, nickel 9.0-11.0%, titanium not more than 0.7%.

Full description

It has the shape of a cylinder with a diameter of 1810 mm, a height of 520 mm. The product is made of forge ingot, which has undergone the following processing: sludge on the forge press of the heated workpiece; free forging; heat treatment in the furnace to obtain the required mechanical properties; mechanical treatment of the surface of the part on a metal-cutting lathe (cutting) to give the product geometry close to the contour of the final product. Designed for the manufacture of a pipe board for a high pressure heater for power plants.

For the production of the final product (pipe board) forging will be subjected to further machining with the removal of metal from the workpiece on the lathe-carousel, horizontal-drill, radial-drill, horizontal-drilling machines, drill holes for heat exchange pipes are made. As a result of such processing, the workpiece undergoes significant changes.

GRI 1 and 6

The rectangular grille is made of sheet galvanized steel with a thickness of 0.8 mm by cutting, flexible, welding methods followed by powder staining.

Full description

Grid size 300x500x35 mm. The grille has six fastening holes with a diameter of 5 mm. The grille is used in industrial and civil construction and is intended for installation in ventilation, air conditioning and smoke removal systems of buildings and structures. There is a sticker on the bar with information for the consumer. The grille is packed in stretch film.

GRI 1 and 6

The product, which is a steel blank convex hemispherical shape, made of sheet metal, which will be used for the manufacture of the "bottom of the lower assembly", fixed by a welded joint on the cylindrical shells of the hydrocracking reactor of the oil refinery.

Full description

In the manufacture of the workpiece, the following main technological operations are used: heating, stamping, heat treatment, control of size and shape, welding, destroying and non-destructive control, ploughing, welding (weeping). The nominal wall thickness of the product is 130 mm, the overall diameter of the product is 4165 mm, the height is 1502 mm, the diameter of the draft hole in the central part of the workpiece is 870±20 mm, the weight is 19955 kg.

GRI 1, 2(a) and 6

The product, which is a steel blank convex hemispherical shape, made of sheet metal, which will be used for the manufacture of the "bottom of the top assembly", fixed by a welded joint on the cylindrical shells of the hydrocracking reactor of the oil refinery.

Full description

In the manufacture of the workpiece, the following main technological operations are used: heating, stamping, heat treatment, control of size and shape, welding, destroying and non-destructive control, ploughing, welding (weeping). The nominal wall thickness of the product is 130 mm, the overall diameter of the product is 4299 mm, the height is 1641 mm, the diameter of the draft hole in the central part of the workpiece is 1550±20 mm, the weight is 22048 kg.

GRI 1, 2(a) and 6

The product, which is a steel blank convex hemispherical shape, made of sheet metal, which will be used for the manufacture of the "bottom of the top assembly", fixed by a welded joint on the cylindrical shells of the hydrocracking reactor of the oil refinery.

Full description

In the manufacture of the workpiece, the following main technological operations are used: heating, stamping, heat treatment, control of size and shape, welding, destroying and non-destructive control, ploughing, welding (weeping). Nominal wall thickness of the product 130 mm, overall diameter of the product 4277 mm, height 1641 mm, diameter of the rough hole in the central part of the workpiece 1550±20 mm, weight 21974 kg.

GRI 1, 2(a) and 6

The product, which is a steel blank convex hemispherical shape, made of sheet metal, which will be used for the manufacture of the "bottom of the lower assembly", fixed by a welded joint on the cylindrical shells of the hydrocracking reactor of the oil refinery.

Full description

In the manufacture of the workpiece, the following main technological operations are used: heating, stamping, heat treatment, control of size and shape, welding, destroying and non-destructive control, ploughing, welding (weeping). The nominal wall thickness of the product is 130 mm, the overall diameter of the product is 4180 mm, the height is 1534 mm, the diameter of the draft hole in the central part of the workpiece is 770±20 mm, the weight is 22488 kg.

GRI 1, 2(a) and 6

The product, which is a steel blank convex hemispherical shape, made of sheet metal, which will be used for the manufacture of the "bottom of the top assembly", fixed by a welded joint on the cylindrical shells of the hydrocracking reactor of the oil refinery.

Full description

In the manufacture of the workpiece, the following main technological operations are used: heating, stamping, heat treatment, control of size and shape, welding, destroying and non-destructive control, ploughing, welding (weeping). The nominal wall thickness of the product is 130 mm, the overall diameter of the product is 4299 mm, the height is 1641 mm, the diameter of the draft hole in the central part of the workpiece is 1550±20 mm, the weight is 22048 kg.

GRI 1, 2(a) and 6

The product, which is a steel blank convex hemispherical shape, made of sheet metal, which will be used for the manufacture of the "bottom of the lower assembly", fixed by a welded joint on the cylindrical shells of the hydrocracking reactor of the oil refinery.

Full description

In the manufacture of the workpiece, the following main technological operations are used: heating, stamping, heat treatment, control of size and shape, welding, destroying and non-destructive control, ploughing, welding (weeping). The nominal wall thickness of the product is 130 mm, the overall diameter of the product is 4153 mm, the height is 1546 mm, the diameter of the draft hole in the central part of the workpiece is 710 ± 20 mm, the mass is 20586 kg.

GRI 1, 2(a) and 6

Forging according to the sketch is a product of corrosion-resistant steel with a carbon content of not more than 0.08%, chromium 17.0-19.0%, nickel 9.0-11.0%, titanium not more than 0.7%.

Full description

It has the shape of a cylinder with a diameter of 395 mm, a height of 145 mm. The product is made of forge ingot, which has undergone the following processing: sludge on the forge press of the heated workpiece; free forging; heat treatment in the furnace to obtain the required mechanical properties; mechanical treatment of the surface of the part on a metal-cutting lathe (cutting) to give the product geometry close to the contour of the final product. Designed for the manufacture of a cover for a high pressure heater for power plants.

For the production of the final product (pipe cover), forging undergoes significant changes (subject to further machining with the removal of metal from the workpiece on the lathe-screw, holes are made for draining condensate).

GRI 1 and 6

Forging according to the sketch is a product of corrosion-resistant steel with a carbon content of not more than 0.08%, chromium 17.0-19.0%, nickel 9.0-11.0%, titanium not more than 0.7%.

Full description

It has the shape of a cylinder size 570x670x158 mm. The product is made of forge ingot, which has undergone the following processing: sludge on the forge press of the heated workpiece; free forging; heat treatment in the furnace to obtain the required mechanical properties; mechanical treatment of the surface of the part on a metal-cutting lathe (cutting) to give the product geometry close to the contour of the final product. Designed for the manufacture of a hatch cover for a high pressure heater for power plants.

For the production of the final product (laze hatch cover), the forging will be subjected to further machining with the removal of metal from the workpiece on the milling-drilling-washing, radial-drilling machines (carving holes are made), as a result of which the workpiece undergoes significant changes.

GRI 1 and 6

Forging according to the sketch is a product of corrosion-resistant steel with a carbon content of not more than 0.08%, chromium 17.0-19.0%, nickel 9.0-11.0%, titanium not more than 0.7%.

Full description

It has the shape of a cylinder with a diameter of 1810 mm, with a hole with a diameter of 1380 mm, a height of 1440 mm. The product is made of blacksmith ingot, which has undergone the following processing: sludge on the blacksmith press of the heated workpiece; firmware on the blacksmith press; free forging; heat treatment in the furnace to obtain the required mechanical properties; mechanical treatment of the surface of the part on the metal-cutting lathe (cutting) to give the product a geometry close to the contour of the final product.

Designed for the manufacture of a water chamber shell for a high pressure heater for power plants. For the production of the final product (water chamber finning), the forging will be subjected to further machining with the removal of metal from the workpiece on the lathe-carousel, horizontal-drill, horizontal-draining machines, as a result of which the workpiece undergoes significant changes.

GRI 1 and 6

Forging according to the sketch is a product of corrosion-resistant steel with a carbon content of not more than 0.08%, chromium 17.0-19.0%, nickel 9.0-11.0%, titanium not more than 0.7%.

Full description

It has the shape of a cylinder (diameter - 1810 mm, height - 405 mm). The product is made of forge ingot, which has undergone the following processing: sludge on the forge press of the heated workpiece; free forging; heat treatment in the furnace to obtain the required mechanical properties; mechanical treatment of the surface of the part on a metal-cutting lathe (cutting) to give the product geometry close to the contour of the final product. Designed for the manufacture of water chamber cover for high pressure heater for power plants.

For the production of the final product (water chamber cover), the forging will be subjected to further machining with the removal of metal from the workpiece on the lathe-carousel, radial-drill, horizontal-draining machines, as a result of which the workpiece undergoes significant changes.

GRI 1 and 6

Steel grinding balls for mills are metal products of spherical shape, made in compliance with the correct geometric shape, with the absence of chips and cracks.

Full description

Balls are used in grinding and crushing equipment (mills) when grinding various materials. Balls are made of heated workpiece by rolling using calibrated rollers with screw cutting. The main stages of ball production are as follows. Workpieces from the loading device on roller rollers continuously pass through the heating inductors of the induction furnace, where they are heated to 1100 - 1150 degrees Celsius. After leaving the setting rollers, the workpiece is fed into the rollers of the working cage of the ball rolling mill, where the rolling of the workpiece is carried out.

During rolling, the rod rotates and moves progressively along its axis. The balls coming out of the working cage come to the draining trough and are transferred to the heat treatment site. After the holiday, the balls arrive at the packaging site, where they are packaged in “big begs” or metal containers.

Technical characteristics: material of manufacture - carbon steel 77; conventional diameter of the ball - 40 mm; nominal diameter of the ball - 41.5 mm; maximum deviation from the nominal diameter of the ball - up to 2.0 mm; design nominal mass of the ball - 0.294 kg.

GRI 1 and 6

Бронежилет открытого ношения, предназначенный для защиты жизненно важных органов человека по классу Бр-1 и холодного оружия по специальному классу защиты «С».

Full description

Бронежилет состоит из универсального чехла, двух стальных бронеэлементов (грудного и спинного), двух пенополиэтиленовых демпферных панелей (грудной и спинной), двух антирикошетных льняных панелей, сумки для переноски из синтетического влагостойкого материала, паспорта. Чехол бронежилета выполнен из высокопрочной синтетической ткани и состоит из переда и спинки, соединенных между собой плечиками и поясными хлястиками, которые закрепляются на передней части чехла застежками на лентах «велькро». Бронеэлементы вставляются во вшитые карманы чехла бронежилета.

Основное свойство бронежилету придают стальные бронеэлементы, изготовленные из горячекатанного листового проката с дальнейшей обработкой (лазерная резка, вальцевание, порошковое окрашивание).

GRI 1, 3(b) and 6

What import requires

Russian bans and restrictions

May apply

Whether a measure applies to your goods is determined by the provisos in the “code” column. Measures are taken from the register as of the date the act was published; the act is named on every line

  • 3920 10 890 9 3926 90 970 9 5407 10 001 0 6211 33 6211 43 6914 90 000 0 7326 19 100 0 7326 19 900 9 7326 90 920 9 7326 90 980 7Out of RussiaProhibited

    Товары двойного назначения

    Средства индивидуальной защиты от стрелкового оружия и осколков, а также бронеэлементы для них из металлических сплавов, сверхвысокомолекулярного полиэтилена или композиционных материалов

    Countries: Австралия, Албания, Андорра, Багамские Острова, Великобритания, государства — члены ЕС, Исландия, Канада, Лихтенштейн, Микронезия, Монако, Новая Зеландия, Норвегия, Республика Корея, Сан-Марино, Северная Македония, Сингапур, США, Тайвань, Украина, Черногория, Швейцария, Япония

    Постановление Правительства РФ от 09.03.2022 № 313 — until Dec 31, 2027

Veterinary and sanitary control

Goods fall under supervision by their type and characteristics

  • Sanitary and epidemiological supervision (control)

    rule for the whole chapter 73
    Материалы, изделия и оборудование, контактирующие с пищевыми продуктами; Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры

    Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

  • Veterinary control (supervision)

    Оборудование и приспособления для перевозки, разведения, временной передержки животных всех видов, а также оборудование для транспортировки сырья (продукции) животного происхождения, бывшие в употреблении

    Such goods need a veterinary certificate, and the manufacturing plant must be on the register of third-country establishments. Check the supplier in the register →

    Решение Коллегии Евразийской экономической комиссии от 20.01.2020 № 13

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

  • Постановление № 2425Единый перечень продукции: сертификация и декларирование в РФ
    • Средства индивидуальной защиты (бронеодежда) — certificate of conformity (part of the heading) · ГОСТ 34286-2017
    • Конвекторы отопительные чугунные — certificate of conformity · ГОСТ 31311-2022, ГОСТ Р 53583-2009
    • Конвекторы отопительные стальные — certificate of conformity · ГОСТ 31311-2022, ГОСТ Р 53583-2009
  • ТР ТС 007/2011Safety of products intended for children and adolescents
    • изделия из металла (ванна, тазик и другие изделия для выполнения туалета) для ухода за детьми — certificate of conformity (part of the heading)
  • ТР ТС 001/2011Safety of railway rolling stock
    • Тяговый хомут автосцепки — certificate of conformity
  • ТР ТС 002/2011Safety of high-speed rail transport
    • Тяговый хомут автосцепки — certificate of conformity
  • ТР ТС 032/2013Safety of equipment operating under excessive pressure
    • Начало действия редакции - 03.04.2022 г. 6. Трубопроводы и арматура, имеющие расчетное давление свыше 0,05 МПа, номинальный диаметр более 25 мм, предназначенные для сжатых, сжиженных, растворенных под давлением газов и паров и используемые для рабочих сред группы 1 См. пред. ред. — declaration of conformity or certificate of conformity
    • Начало действия редакции - 03.04.2022 г. 7. Трубопроводы и арматура, имеющие расчетное давление свыше 0,05 МПа, номинальный диаметр более 32 мм и произведение значения расчетного давления и значения номинального диаметра, составляющее свыше 100 МПа·мм, предназначенные для сжатых, сжиженных, растворенных под давлением газов и паров и используемые для рабочих сред группы 2 См. пред. ред. — declaration of conformity or certificate of conformity
    • Начало действия редакции - 03.04.2022 г. 8. Трубопроводы и арматура, имеющие расчетное давление свыше 0,05 МПа, номинальный диаметр более 25 мм и произведение значения расчетного давления и значения номинального диаметра, составляющее свыше 200 МПа·мм, предназначенные для жидкостей и используемые для рабочих сред группы 1 См. пред. ред. — declaration of conformity or certificate of conformity
    • Начало действия редакции - 03.04.2022 г. 9. Трубопроводы и арматура, имеющие расчетное давление свыше 1 МПа, номинальный диаметр более 200 мм и произведение значения расчетного давления и значения номинального диаметра свыше 500 МПа·мм, предназначенные для жидкостей и используемые для рабочих сред группы 2 См. пред. ред. — declaration of conformity or certificate of conformity
  • ТР ЕАЭС 043/2017About requirements to means of ensuring fire safety and fire extinguishing
    • Карабины пожарные — declaration of conformity
    • Водосборники рукавные — declaration of conformity
    • Сетки всасывающие пожарные — declaration of conformity

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

How it is done in practice

Valid documents in the EAEU unified register for subheading 7326 90: certificates 2,059, declarations 7,034.

By technical regulation
ТР ТС 032/20137,990ТР ТС 010/2011568ТР ТС 018/2011253ТР ТС 020/2011141ТР ТС 004/201192
Schemes
2д6,0264с1,5681д8151с2183с189The letter after the scheme number shows the form: certification or declaration of conformity.
Most active certification bodies
ОС «ВладСерт» АНО Центр экспертизы и сертификации «Техкранэнерго»ООО Центр сертификации ТАТСЕРТОрган по сертификации продукции машиностроения, взрывозащищённого оборудования и бытовой техники Ассоциации экспертов по сертификации и испытаниям продукции Сертификационный центр НАСТХОЛ
Manufacturers outside the EAEU
China484Germany65Italy37Türkiye37United States24United Kingdom20

Manufacturers of these goods →Check a supplier’s document by its number →

Dual use

Expert review needed

Goods fall under control by their technical characteristics, regardless of the code. Supplying without a licence when one is required is a criminal offence

  • Раздел 1 · Категория 1. Специальные материалы и связанные с ними оборудование и снаряжение

    • Системы, оборудование и компоненты → Бронежилеты и компоненты для них:1.1.5.2 Жесткие пластины для бронежилетов, обеспечивающие класс баллистической защиты, равный IIIA или менее в соответствии со стандартом Национального института юстиции США NIJ 0101.06 (июль 2008 г.) или эквивалентными стандартами

  • Раздел 1 · Категория 8. Морское дело

    • Системы, оборудование и компоненты → Судовые системы, оборудование и компоненты: → Системы, оборудование и компоненты, специально разработанные или модифицированные для подводных аппаратов и разработанные для эксплуатации на глубинах, превышающих 1000 м:8.1.2.1.3 Оптоволоконные трос-кабели связи и соединители для них, усиленные элементами из синтетических материалов;

  • Раздел 4 · вывоз по соображениям национальной безопасности · Категория 8. Транспортные средства

    • Системы, оборудование и компоненты8.1.5 Конструкции из металлических или неметаллических материалов либо их комбинаций, шлемы, нательная бронезащита и ее компоненты, предназначенные для обеспечения баллистической защиты от поражения огнем стрелкового оружия

Checked: one control list of six: dual-use goods (Russian Government Decree No. 1299 of 19.07.2022). The other five lists (nuclear, nuclear dual-use, missile, chemical, biological) are not checked here.

Payments on import

Duty for this code: 7.5%. On top of the duty, on import into Russia you pay VAT of 22% (unless the goods are VAT-exempt) of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

Import VAT in EAEU countries

  • Russia22%
  • Kazakhstan16%
  • Belarus20%
  • Armenia20%
  • Kyrgyzstan12%

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

May be VAT-exempt

The exemption under list No. 1042 applies if the goods match the description and are registered as a medical device:

  • 7326 — Трости, костыли, опоры (в том числе ходунки, манежи, палки-опоры) 93 9670
  • 7326 — Специальные средства для самообслуживания и ухода за инвалидами (в том числе подушки и матрацы профилактические, противопролежневые и ортопедические, кровати медицинские с подъемными приспособлениями, фиксаторами, стулья и кресла функциональные, на колесиках, со съемными элементами, поручни, оборудование для подъема и перемещения, специальные приспособления для пользования средствами личной гигиены), специальные средства при нарушениях функции выделения (в том числе уропрезервативы, мочеприемники, мешки для сбора мочи, катетеры, ремни для крепления мешков для сбора мочи, вешалки-крючки для крепления мочеприемников, калоприемники, мешки, пластины и фильтры к калоприемникам, кольца защитные и эластичные полукольца, стержни для стомы, очистители для кожи, нейтрализаторы запаха, анальные тампоны, тампоны для стомы, ирригационные системы и рукава для стомы, пояса крепления калоприемников)
  • 7326 — Приспособления для захвата и передвижения предметов (в том числе держатели для посуды, ключей, инструмента, телефонной трубки, манжеты-держатели, противоскользящие и магнитные ленты, коврики, зажимы, крюки на длинной ручке, палки со щипцами и магнитами)
Calculate the whole deal →Quick payment estimate →

The right code is in the HS code search.