7609 00 — Aluminium tube or pipe fittings "e.g., couplings, elbows, sleeves"
Aluminium tube or pipe fittings "e.g., couplings, elbows, sleeves"
Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
Where it sits in the nomenclature
Section XV. Base metals and articles of base metal
Explanatory notes to heading 7609 2 paragraphs
Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.
7609 Aluminum pipe or tube fittings (e.g. couplings, knees, flanges)
The provisions of the Explanatory Notes to headings 7307 and 7412 apply, mutatis mutandis, to this heading. The heading excludes: (a) Clamps and other devices specially designed for assembling parts of structures (heading 7610). (b) Hangers and brackets for supporting pipes; aluminium bolts and nuts used for assembling or fixing tubes or pipes (heading 7616). (c) Fittings with valves, taps, cocks, etc. (heading 8481).
Official text adopted by a Recommendation of the EEC Board
Notes to chapter 76 — Aluminium and articles thereof 6 items
Subheading notes
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
1. The terms used in this chapter mean:
(a) "non-alloy aluminum" means a metal containing at least 99 % by weight of aluminium, provided that the mass content of each of the other elements does not exceed the limits specified in the following table:
Other elements
Element
Maximum content, wt.%
Fe+Si
(iron plus silicon)
1.0
Other elements (each of them)
0.1
Other elements include, for example, Cr, Cu, Mg, Mn, Ni, Zn.
Copper content is allowed in quantities greater than 0.1 wt.%, but not more than 0.2 wt.%, provided that the content of chromium or manganese is not more than 0.05 wt.%.
(b) "aluminum alloys" means metal alloys in which the aluminium content by mass exceeds that of each of the other elements contained in the alloy, provided that:
(i) the mass content of at least one of the other elements or iron and silicon taken together will exceed the mass limit indicated in the table; or
(ii) the total content of other elements is more than 1% by weight.
2. Notwithstanding the provisions of note 9 (c) to section XV, for the purposes of subheading 7616 91, the term “wire” means only articles rolled up or not rolled into coves and with any shape of cross-section not exceeding 6 mm.
Additional note
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
1. In subheading 7601 20 200, the following terms mean:
- "slabs" - raw products having a continuous cross-section throughout the length in the form of rectangles or other polygons, with a width of more than 800 mm, a thickness of more than 280 mm and a length always exceeding the width and thickness. These products are intended for rolling;
- "tickets" - raw products having a continuous cross-section in the form of circles (including "flattened circles"), with a diameter of more than 125 mm. These products are designed for extruding.
Additional note of the Eurasian Economic Union
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
1. For the purposes of subheading 7606 12 200 2, the term “multilayer panels” means a flat, multilayered material consisting of two outer aluminium sheets coated and one or more layers of filler forming an inner layer or core.
How it is done in practice
Valid documents in the EAEU unified register for subheading 7609 00: certificates 30, declarations 182.
- By technical regulation
- ТР ТС 032/2013129ТР ЕАЭС 043/201746ТР ТС 010/201118ТР ТС 018/201113ТР ТС 012/20115
- Schemes
- 1д894д526д193с183д15The letter after the scheme number shows the form: certification or declaration of conformity.
- Most active certification bodies
- Учреждение «Республиканский центр сертификации и экспертизы лицензируемых видов деятельности» Министерства по чрезвычайным ситуациям Республики БеларусьНП РУП «Белорусский государственный институт стандартизации и сертификации»ООО «Центр Сертификации и Испытаний»
- Manufacturers outside the EAEU
- China50United States14Germany9India5United Kingdom4Italy4
Manufacturers of these goods →Check a supplier’s document by its number →
Codes inside
Only the ten-digit code carries a duty rate
| Code | Name |
|---|---|
| 7609 00 00 | Aluminium tube or pipe fittings (for example, couplings, elbows, sleeves) |
The right code is in the HS code search.