Skip to content
IMEXP.RU
EAEU HS code

8309 90 900 9 — Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal: other: other: other

Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal: other: other: other

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

Duty rate
10%

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit
Not applicable
Requirements and measures
4

None: dual use, EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT
22%

The general import rate in Russia: Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025). This code is not named on the 10% VAT list (Decree No. 908) or the exemption list (No. 1042). The list of medical goods No. 688 is not checked here.

Where it sits in the nomenclature

Section XV. Base metals and articles of base metal

  1. 83Miscellaneous articles of base metal
  2. 8309Stoppers, caps and lids, incl. crown corks, screw caps and pouring stoppers, capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal
  3. 8309 90Stoppers, caps and lids, incl. screw caps and pouring stoppers, capsules for bottles, threaded bungs, bung covers, seals and other packing accessories of base metal (excl. crow corks)
  4. 8309 90 90Stoppers, caps and lids, incl. screw caps and pouring stoppers, capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal (excl. crown corks, capsules of lead and capsules of aluminium of a diameter > 21 mm)
  5. 8309 90 900 9you are here

Compare the description of your goods with the neighbouring codes on the subheading line above.

Explanatory notes to heading 8309 2 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

8309 Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, of base metal: 8309 10 – Crown corks 8309 90 – Other

This heading covers a range of articles of base metal (often with washers or other fittings of plastics, rubber, cork, etc.) used for stoppering or closing drums, barrels, bottles, etc., or for sealing boxes or other packings. The heading includes: (1) Metal stoppers, caps and lids, e.g., crown corks, caps or seals; stoppers, caps and lids of the screw, snap-on, lever, spring and other types, used for stoppering or closing beer bottles, mineral water bottles, jam jars, tubular containers or similar receptacles. The heading does not, however, include spring lever stoppers consisting mainly of plastics, porcelain, etc. (2) Bungs for metal drums. (3) Pouring, drip and non-drip stoppers for bottles of liqueurs, oils, medicines, etc. (4) Tear-off capsules for milk bottles, etc., finished capsules of lead or tin foil used for certain champagne or wine bottles. (5) Stopper covers in the form of discs, etc., cut from sheet metal and fixed to stoppers as a protection. (6) Special wire fittings used to protect the corks of champagne bottles, etc. (7) Seals of all kinds, generally of lead or tin sheet, for protecting packing crates, boxes, buildings, railway wagons, vehicles, etc., including guarantee seals. (8) Box corner protectors. (9) Closures for sacks, bags or similar containers, consisting of one or two steel wires set between two strips of plastics or paper. (10) Lids with a scored tongue and a ring of base metal, used, e.g., for beverage or food cans.

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 83 — Miscellaneous articles of base metal 2 items

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. In this Chapter, parts of articles made of base metals shall be classified in the same headings as the articles to which they belong. However, articles of ferrous metals of heading 7312, 7315, 7317, 7318 or 7320 or similar articles of other base metals (Chapters 74 to 76 and 78 to 81) are not to be regarded as parts of articles of this Chapter.

2. For the purposes of heading 8302, the term “furniture wheels” means furniture wheels or rollers of a diameter (including, where appropriate, a tyre) not exceeding 75 mm or the same wheels or rollers of a diameter (including, where applicable, a tyre) greater than 75 mm, provided that the width of the wheel or tyre mounted on it is less than 30 mm.

What import requires

Russian bans and restrictions

May apply

Whether a measure applies to your goods is determined by the provisos in the “code” column. Measures are taken from the register as of the date the act was published; the act is named on every line

  • 8309 90 900Into RussiaProhibited

    Товары происхождения либо отправления Украины

    Прочие пробки, колпачки и крышки, пробки нарезные, оболочки пробок герметизирующие и прочие упаковочные принадлежности из недрагоценных металлов

    Countries: Украина

    Указ Президента РФ от 22.10.2018 № 592; Постановление Правительства РФ от 29.12.2018 № 1716-83

Veterinary and sanitary control

Goods fall under supervision by their type and characteristics

  • Sanitary and epidemiological supervision (control)

    rule for the whole chapter 83
    Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры

    Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

  • ТР ТС 005/2011Safety of packaging
    • Металлические укупорочные средства (пробки, крышки, колпачки (включая корончатые колпачки, завинчивающиеся колпачки и колпачки с устройством для разливки), кронен-пробки, крышки-высечки, мюзле, скобы) (для укупоривания пищевой и парфюмерно-косметической продукции) — declaration of conformity
    • Комбинированные укупорочные средства (пробки, пробки-крышки, колпачки, крышки, прокладки уплотнительные) (для укупоривания пищевой и парфюмерно-косметической продукции) — declaration of conformity (part of the heading)

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

How it is done in practice

Valid documents in the EAEU unified register for subheading 8309 90: certificates 124, declarations 2,717.

By technical regulation
ТР ТС 005/20112,667ТР ТС 018/2011144ТР ТС 010/20119ТР ТС 020/20112ТР ТС 007/20111
Schemes
4д1,3953д1,0271д1872д4711с45The letter after the scheme number shows the form: certification or declaration of conformity.
Most active certification bodies
ООО «Центр Сертификации Стандарт»НП РУП «Белорусский государственный институт стандартизации и сертификации»ООО «ПРОФИТ»
Manufacturers outside the EAEU
China575Germany46Türkiye36Italy34Poland31France24

Manufacturers of these goods →Check a supplier’s document by its number →

Payments on import

Duty for this code: 10%. On top of the duty, on import into Russia you pay VAT of 22% of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

Import VAT in EAEU countries

  • Russia22%
  • Kazakhstan16%
  • Belarus20%
  • Armenia20%
  • Kyrgyzstan12%

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

Calculate the whole deal →Quick payment estimate →

The right code is in the HS code search.