EAEU HS code

8424 89 000 9 — Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sand blasting machines and similar jet projecting machines: other appliances: other: other

Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sand blasting machines and similar jet projecting machines: other appliances: other: other

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

Duty rate

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit

шт

Item

Requirements and measures

Veterinary and sanitary control1
Conformity assessment20
Dual use3

None: russian bans and restrictions, EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT

VAT-exempt or 22%

Exempt if it is a medical device on the exemption list. Otherwise 22%.

Where it sits in the nomenclature

Section XVI. Machinery and mechanical appliances; electrical equipment; parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles

84Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
8424Mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders, n.e.s.; fire extinguishers, charged or not (excl. fire-extinguishing bombs and grenades); spray guns and similar appliances (excl. electric machines and apparatus for hot spraying of metals or sintered metal carbides of heading 8515); steam or sand blasting machines and similar jet projecting machines; parts thereof, n.e.s.
8424 89Mechanical appliances, whether or not hand-operated, for projecting, dispersing or spraying liquids or powders, n.e.s.
8424 89 00Other appliances: other
8424 89 000 9you are here

Compare the description of your goods with the neighbouring codes on the subheading line above.

Explanatory notes to heading 8424 5 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

8424 Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sand blasting machines and similar jet projecting machines (+): 8424 10 – Fire extinguishers, whether or not charged 8424 20 – Spray guns and similar appliances 8424 30 – Steam or sand blasting machines and similar jet projecting machines – Agricultural or horticultural sprayers: 8424 41 – – Portable sprayers 8424 49 – – Other – Other appliances: 8424 82 – – Agricultural or horticultural 8424 89 – – Other 8424 90 – Parts

This heading covers machinery and appliances for projecting, dispersing or spraying steam, liquids or solid materials (e.g., sand, powders, granules, grit or metal abrasives) in the form of a jet, a dispersion (whether or not in droplets) or a spray. However, this heading excludes machines for cutting by means of a jet of water or of a water-abrasive mixture, designed for high-precision cutting of a wide variety of materials (e.g., stone, composite materials, rubber, glass, metal). These machines generally operate at pressures of 3 000 to 4 000 bar with a water jet, or a water jet to which a fine abrasive has been added, directed at a speed 2 to 3 times the speed of sound (heading 8456). (A) FIRE EXTINGUISHERS, WHETHER OR NOT CHARGED This category of goods includes fire extinguishers (whether or not filled) of the kinds using foam-producing or other charges, including simple extinguishers fitted with taps, valves, percussion caps or other devices for setting the extinguishers in operation. This heading excludes: (a) charges for fire-extinguishers and charged fire-extinguishing grenades (heading 3813); (b) fire pumps, with or without their own tanks, heading 8413 (non-vehicle types) or heading 8705 (vehicle types). (B) SPRAY GUNS AND SIMILAR APPLIANCES Hand-operated spray guns and similar appliances are usually designed for connection to compressed air or steam lines, and also, directly or through piping, to a reservoir containing the material to be sprayed. They are fitted with triggers or other valves to control the flow passing through a nozzle which usually

is adjustable to give a jet or a spray with a wider or narrower angle of spray. They are used for spraying paint (including distemper), varnishes, oils, plastics, cement, metal powders, textile flock, etc. They may also be used to produce a powerful jet of compressed air or steam for cleaning the stonework of buildings, sculptures, etc. This category also covers separately presented hand-operated "anti-set-off" spraying devices designed to be fitted to printing machines, and hand pistols for spraying metals, working either on the principle of feeding compressed air carrying suspended particles, or on a principle combining the action of an electric heater and a jet of compressed air. Hand-operated sprayers fitted with a self-contained electric motor and having a pump and a container for the material to be sprayed (paints, varnishes, etc.) are also classified in this heading. (C) STEAM OR SAND BLASTING MACHINES AND SIMILAR JET PROJECTING MACHINES Sand blasting and similar machines are often of heavy construction and sometimes incorporate compressors. They are used for descaling or cleaning metal articles, for etching or frosting glass, stone and other materials, by projecting against the articles high-pressure jets containing sand, metal abrasive, etc. They are generally fitted with dust extractors for removing residual sand and dust. The heading also covers steam jet appliances used, for example, for degreasing machined metal surfaces, etc. (D) SPRAYERS FITTED WITH NOZZLES, ATOMISERS AND POWDER DISTRIBUTORS These appliances are used for insecticides, fungicides and other chemical products in agriculture, horticulture or in the household. The heading covers appliances with or without built-in reservoirs, hand-operated (including simple sprayers with piston pumps) or operated by foot pedal, and also powder bellows, knapsack sprayers and mobile spraying appliances. The heading also covers self-propelled spraying appliances in which the engine, in addition to supplying power for the pumps and the spraying, may be engaged to provide limited movement of the appliance for working purposes. However, the heading excludes appliances forming part of the motor vehicles of heading 8705. Provided that they incorporate mechanical devices for producing or distributing the spray or for automatically regulating the direction of the jet (including simple mechanisms actuated by water pressure), the heading covers the following types of appliances (fixed, mobile or self-propelled): (1) Sprinklers and sprayers for lawns, orchards, etc. (e.g., rotating and oscillating sprinklers). (2) Hydraulic appliances designed for washing out minerals (e.g., auriferous sand) from hillsides, etc., by projecting a powerful jet of water, and water-jet barking machines used in the paper industry.

The heading also covers mechanical devices for washing the windscreens and headlamps of motor vehicles, and flame-throwers used for destroying weeds or for other agricultural purposes. The heading excludes: (a) insecticides put up in pressurised containers fitted with simple discharge valves (heading 3808); (b) nozzles for hose-pipes (Section XV, or heading 8481 if they are fitted with taps, cocks, valves or other devices for regulating the flow of liquid); (c) medical appliances of heading 9018; (d) scent sprayers and similar toilet sprayers (heading 9616). (E) IRRIGATION SYSTEMS These irrigation systems, consisting of various components connected to one another, generally comprise: (i) a control station (mesh filters, fertiliser injectors, metering valves, check valves, pressure regulators, pressure gauges, air vents, etc.); (ii) an underground network (distribution lines and branch lines which carry the water from the control station to the irrigation area); and (iii) a surface network (drip lines fitted with dripper outlets). Such systems are classified in this heading as functional units as described in Note 4 to Section XVI (see the General Explanatory Note to that Section). The heading also covers: (1) Machines for coating various articles (e.g., lids, cardboard containers, boxes) by spraying them with paraffin wax or molten wax. (2) Electrostatic painting appliances consisting of a spray gun connected to the paint reservoir by a flexible tube through which the paint is fed, and by an electric cable to a high-voltage generator. The electrostatic field formed between the object to be painted and the spray gun attracts to that object the particles of paint atomised by compressed air and prevents their dispersal. (3) Industrial robots specially designed for projecting or spraying liquids or powders. PARTS Subject to the general provisions regarding the classification of parts (see the General Explanatory Note to Section XVI), the heading covers parts of the appliances and apparatus of this heading. Thus, parts falling in this heading include, inter alia, reservoirs for sprayers, spray nozzles, tubes and heads of turbulence sprayers, other than those of the kinds falling in heading 8481. The heading also excludes: (a) hand-operated oil cans and grease guns (heading 8205), and grease guns operated by compressed air and other lubricating equipment with forced feed of lubricant (heading 8467); (b) steam soot blowers for boilers (heading 8404);

(c) furnace burners (heading 8416); (d) machinery for cleaning casks or other containers by means of a jet of water, steam, sand, etc. (heading 8422); (e) ink-jet printing machines (heading 8443); (f) automatic vending machines for spraying aromatic substances, of the perfume-spray type (heading 8476); (g) machinery for spreading mortar or concrete evenly, or for spreading gravel on road or similar surfaces (heading 8479); (h) salt and sand spreaders for snow clearing, designed to be mounted on a lorry (heading 8479); (ij) spraying appliances for etching, developing, stripping resist or cleaning semiconductor wafers and flat panel displays; machines for cleaning and removing contaminants from the metal leads of semiconductor packages prior to electroplating (high-pressure jet cleaning) (heading 8486); (k) electric machines and apparatus for hot spraying of metals or cermets (heading 8515); (l) dental jet drills (heading 90 18) and aerosol therapy apparatus (heading 9019). Subheading Explanatory Notes. Subheading 8424 20 This subheading covers the appliances described in Item (B) of the Explanatory Note to heading 8424. Subheading 8424 41 The term «portable sprayers» means spraying appliances which the user can pull along or carry by a handle or on one or two shoulder straps. This subheading covers pressure sprayers (which may be sold as «spray guns»), consisting of a pressurised reservoir fitted with an integral pressure pump and a funnel, a carrying strap, a flexible hose and a hand-held spray wand fitted with a brass tube and an adjustable nozzle; all the elements of the sprayer have physical characteristics which clearly make them most suitable for use in agriculture or horticulture (e.g., a working pressure of 3 bar, a capacity of 5 l, a nozzle with an adjustable orifice). Other examples of portable sprayers of this subheading are knapsack sprayers with a hand lever pump, motorised knapsack sprayers, motorised knapsack mist-blowers, portable sprayers with rotary atomisers and boom sprayers pulled or pushed by hand. This subheading excludes hot and cold fog generators.

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 84 — Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof 24 items

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) millstones, grinding stones or other articles of Chapter 68;

(b) equipment or devices (e.g. pumps) of ceramic materials and ceramic parts of machinery or devices of any material (Chapter 69);

(c) laboratory glassware (heading 7017); equipment, devices or other articles for technical purposes or parts thereof of glass (heading 7019 or 7020);

(d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81);

(e) vacuum cleaners of heading 8508;

(f) electromechanical household appliances of heading 8509; digital cameras of heading 8525;

(g) radiators for articles of Section XVII; or

(h) manual mechanical brushes for floor cleaning, without engine (heading 9603).

2. Subject to the provisions of Note 3 to Section XVI and Note 11 to this Chapter, a machine or device which meets the description in one or more of headings 8401 to 8424 or heading 8486 and at the same time the description in one or more headings 8425 to 8480 is included in the relevant heading of the first series of headings or in heading 8486 as the case may be, and not in the second series.

(A) However, heading 8419 does not cover:

(i) seed germination equipment, incubators or brooders (heading 8436);

(ii) machinery for wetting grains (heading 8437);

(iii) diffusion apparatus for the extraction of sugary juice (heading 8438);

(iv) equipment for the heat treatment of textile yarn, textile materials or finished textile articles (heading 8451); or

machining equipment, assemblies or laboratory equipment in which temperature change, even if necessary, is an auxiliary process.

(B) Heading 8422 does not cover:

(i) sewing machines for sewing bags or similar packagings (heading 8452); or

(ii) office equipment of heading 8472.

(i) paint-blasting printing presses (heading 8443); or

(ii) water jet cutting machines (heading 8456).

3. A machine for processing any material which corresponds to the description of heading 8456 and simultaneously to the description of heading 8457 to 8461, 8464 or 8465 is classified in heading 8456.

4. Heading 8457 covers only metalworking machines other than lathes (including multipurpose lathes) which may perform different types of machining operations by:

(a) the automatic replacement of tools from a tool store or similar device in accordance with the processing program(s);

(b) the automatic application simultaneously or sequentially of different processing heads operating at a fixed workpiece (assembly single-position machines); or

5. For the purposes of heading 8462, the term “longitudinal cutting line” for flat products means a process line consisting of a winder, a correct device, a longitudinal cutting device and a winder. The term “cross-cutting line” for flat products means a process line consisting of a unwinder, a correct device and a cutting device.

6. (A) For the purposes of heading 8471, the term “computers” means machines capable of:

(i) store the processing program or programs and at least the information currently necessary to execute the program;

(ii) be freely reprogrammable according to user requirements;

(iii) perform user-defined arithmetic calculations; and

(iv) perform, without human intervention, a processing program requiring the computer to modify its actions by making logical decisions during processing.

(B) Computing machines can be made in the form of systems consisting of a different number of individual blocks.

(C) Subject to the provisions of Notes (D) and (E) below, a block shall be treated as part of a computing system if it satisfies all of the following conditions:

(i) exclusively or principally used in a computing system;

(ii) is capable of being connected to the central processing unit either directly or through one or more other units; and

(iii) is capable of receiving or presenting information in such form (codes or signals) as may be used by the system.

Separately presented computer units are classified in heading 8471.

However, keyboards, X-Y-coordinate input devices and disk storage units which satisfy the conditions laid down in Notes (B) (ii) and (B) (iii) above are in all cases to be regarded as blocks of heading 8471.

(D) Heading 8471 does not cover the following devices, presented separately, even if they meet all the conditions of Note 6(C) above:

(i) printers, copiers, facsimile machines, combined or not;

(ii) apparatus for receiving or transmitting voice, images or other data, including apparatus for providing communications over a wired or wireless communication network (for example, on a local or wide area network);

(iii) loudspeakers and microphones;

(iv) television cameras, digital cameras and video recording cameras;

(v) monitors and projectors not combined with television reception equipment.

(E) Machines containing or working in conjunction with a computer and performing specific functions other than information processing are classified in the headings according to their specific functions or, if this is not possible, in the residual headings.

7. Heading 8482, inter alia, covers polished steel balls whose maximum and minimum diameter does not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is smaller. Other steel balls are classified in heading 7326.

8. A machine which is used for more than one purpose shall be classified as if its primary purpose were the only one.

Subject to the provisions of Note 2 to this Chapter and Note 3 to Section XVI, a machine whose primary purpose is not described in any heading or a machine in which none of its functions is primary is classified in heading 8479, unless the context otherwise provides. Heading 8479 also includes machinery for the manufacture of ropes or ropes (e.g. knitting machines) from metal wire, textile yarn or other materials or from a combination of such materials.

9. For the purposes of heading 8470, the term “pocket” applies only to devices not exceeding 170 x 100 x 45 mm.

10. For the purposes of heading 8485, the term additive manufacturing (also referred to as 3D printing) means the formation of physical objects based on a digital model by successively adding and layering, sealing and curing a material (e.g., metal, plastics or ceramics).

Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machines as described in heading 8485 are classified in that heading and no other heading of the Nomenclature.

11. (A) Notes 12(a) and 12(b) to Chapter 85 also apply to the terms “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this note and in heading 8486. However, in this note and in heading 8486, the term "semiconductor devices" also applies to photosensitive semiconductor devices and LEDs.

(B) In this note and in heading 8486, the term “plane display panel production” covers the fabrication of a flat panel of substrates. It does not cover the production of glass or the installation of printed circuit boards or other electronic components on flat panels. The term "flat display panel" does not apply to cathode ray tube technology.

(i) producing or eliminating defects in masks and patterns;

assemblies of semiconductor devices or electronic integrated circuits;

(iii) lifting, manipulating, loading or unloading boules, plates, semiconductor devices, electronic integrated circuits and flat display panels.

(D) Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machinery meeting the description in heading 8486 is classified in this heading and in no other heading of the Nomenclature.

Subheading notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. For the purposes of subheading 8465 20, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.

2. For the purposes of subheading 8471 49, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).

3. For the purposes of subheading 8481 20, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481.

4. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.

Additional notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheadings 8407 10 and 8409 10, the term “aviation engines” shall apply only to engines intended for assembly with an air or rotor.

2. В подсубпозицию 8471 70 300 0 также включаются устройства считывания компакт-дисков, являющиеся запоминающими устройствами вычислительных машин, которые предназначены для считывания сигналов с CD-ROM, аудиокомпакт-дисков и фотокомпакт-дисков и снабжены разъемом для наушников, регулятором громкости или кнопкой пуск/стоп.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheading 8482 10 900 1, the term “gross mass” means the total mass of the goods with all kinds of packaging materials and packagings ensuring their safety during storage and transport. The total weight of the goods does not include the mass of packaging materials or containers that are clearly suitable for reuse.

2. For the purposes of subheading 8415 81 001 0, the term “special production facilities” means premises in which the maintenance of precise values of temperature and humidity is due to the operational requirements of the equipment installed therein, such as machines, computers, switching equipment, surgical equipment, etc., or to the operations performed therein.

3. In subheadings 8427 20 190 1, 8427 90 000 1 and 8436 80 100 1, the date of manufacture shall be determined on the basis of the technical documentation of the manufacturer (technical passport, instruction manual) and the manufacturer's plate, which shall be fixed in a conspicuous, easily accessible place of the machinery and shall not be replaced during operation. If the manufacturer's technical documentation and the manufacturer's plate contain conflicting information about the date of manufacture or there is no information about the manufacturer of the equipment on the date of manufacture, then this technique is considered a technique, since the release of which more than 3 years have passed.

If the manufacturer's information indicates only the year of manufacture, then the date of manufacture of the equipment is considered 1 July of the year of manufacture; if the month and year of manufacture are indicated, the date of manufacture is the 15th day of the month specified in the manufacturer's information.

4. For the purpose of classification of goods in subheading 8482 10 900 1 in the states, whose territories constitute the customs territory of the Eurasian Economic Union, when applying the term "French border of the country of importation", the country of import is understood as the customs territory of the Eurasian Economic Union.

5. For the purpose of subheading 8407 10 000 3, the term “take-off power” means the maximum power developed by an aircraft piston engine.

“Take-off power” is specified in the technical documentation and (or) accompanying documents, measured in kilowatts or horsepower (1 kW corresponds to 1.35962 hp).

6. В подсубпозиции 8421 99 000 5 термин «элементы мембранные рулонного типа для фильтрования или очистки жидкостей» означает устройства цилиндрической формы, состоящие из:

- internal plastic perforated tube on which spirally wound membrane bags;

- drainage material located between membrane bags and glued to them on three sides.

The membrane package consists of a twice folded band of membrane containing an extruded grid inside.

At the ends of the membrane roll-type element, fixing discs and sealing cuffs can be installed.

7. For the purposes of subheading 8415 20 000 2, the term “in a single enclosure” refers to air conditioning units (air conditioners) in which all the elements are combined in a single enclosure, frame or platform.

The term "in a single housing" also applies to air conditioning units (air conditioners) in which the refrigeration compressor, which is part of a given air conditioning unit (air conditioner), is located separately, that is, not combined with the rest of the elements in one housing, on one frame or on one platform.

EEC classification decisions (1)

Binding in all EAEU member states: if the goods match the description, the decision fixes the code

8424 89 000 9Decision No. 55 of May 21, 2024decision text → No. 55, opens in a new tab
Ручное механическое дозирующее распыляющее устройство

Classification rulings for this code (23)

Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.

A spray nozzle for polymeric drugs for oral use with a protective cap in an individual package (hereinafter referred to as the Nozzle) is a device for spraying (spraying) a liquid drug.

Full description

The nozzle consists of the following components: a cap for protection against dust, a pressure mechanism, a horizontal lever, a valve rod, a draw, a cap, a spring, a seal, a piston, a substrate, a spring, a ball, a long pressure mechanism, an insert, a body, a submersible tube. The nozzle is attached to the bottle with the drug (not included) by screwing in a vertical position.

The principle of operation: when manually pressing the dispenser, the air in the body is compressed, then the pressure on the dispenser is removed, the pressure in the body causes the spring to bounce, the steel ball again compacts the body. Then, when pressed on the dispenser, the liquid in the body leaves the liner through the grooves and turns into sprayed particles (dispersions). The nozzle is packed in an individual polymer packaging.

GRI 1 and 6

The equipment is an automatic conveyor type line designed for powder staining of metal products by automatic electrostatic spraying with preliminary preparation of products for painting.

Full description

The line consists of the following main components: a conveyor for transporting products with loading and unloading sites (125 m); a pre-production area (including a degreasing bath, a first wash bath, a second wash bath); a drying furnace for removing moisture residues from products; a system for recognizing the dimensions of products; an automatic powder spray chamber (equipped with automatic (12 pcs.) and hand (2 pcs.) paint pistols, manipulators (2 pcs.)); a polymerization furnace (for the filtration and filtration control system);

Principle of operation: the products are hung on the conveyor suspension nodes and moved to the area of preliminary surface preparation, where degreasing, phosphating and two-stage washing are performed; then the products are moved to the drying furnace and then pass through the system of recognition of the dimensions of the products to determine the optimal mode of operation of the paint equipment; then the products enter the automatic powder spraying chamber for coating by hand at the expense of the electrostatic charge, which the powder particles are obtained at the exit of the powdered pistol cycle, where the pistol is re-covered in high temperature, where the re-covering of the pistol is then applied to the polymericles;

Management and control of the technological process is carried out by the management system.

GRI 1 and 6

The spray nozzle is a spraying device consisting of a spray head, a model ...

Full description

(...) with a protective cap and a piston device, a model ... (...) consisting of: a rod, a lid, a sealer, a gasket, an upper spring, a sleeve, a pusher, a lower spring, a body, a glass, a ball and a siphon tube. It is intended for treatment of the mucous membrane of the nasal and oral cavity by spraying various medical solutions and medicines for individual use. It is used in medical, medical and preventive institutions, hospitals, polyclinics, medical industry, pharmacies, home conditions. It is not intended for use with aromatic, hygienic and perfume products.

The principle of action is based on spraying the medicinal composition through the nozzle, into which it is squeezed under the action of a spring-loaded piston through the channel and subsequent filling of the volume above the piston liquid coming from the tank through the siphon tube, under the action of vacuum during the reverse course of the piston. The piston device is attached to the vial by means of an internal thread. When pressed on the mobile part of the spraying device, the rod moves along with it, compressing the spring.

The piston device, the model ... (...) is packed separately from the spray head, the model ... (...) with a protective cap, in a plastic bag, in an equal number of pieces.

Manufacturer:

GRI 1, 2(a) and 6

The equipment is an automatic conveyor type line designed for powder painting of small metal parts of bus equipment by automatic electrostatic spraying with preliminary preparation of products for painting (maximum dimensions of parts (d / sh / in): 1000x3000x1000 mm).

Full description

The line consists of the following main components: area of manual surface preparation (camera manual surface preparation c lighting system, temperature sensor, motorized gates with electric drive (2 units), exhaust fans with air ducts (2 pcs), hand grinding machines (6 units), dust removal system; air conditioning unit with supply fan, filters, with a gas burner, pressure drop sensors (2 units); electric air valve; service platform; Powder coloring zone (suspended "Power & Free" conveyor of a closed circuit (180 m) with supports; chambers of automatic powder painting (2 pcs.) with a lighting system, Reciprocaters (4 units), automatic (16 pcs) and manual (4 pcs) electrostatic pistols with power supplies (20 pcs) and injectors (20 pcs); cyclone powder paint recovery system, including a powder paint filter with an air duct (2 pcs), exhaust fan (2 pcs), cyclone separator with duct (2 units); central air conditioning unit with supply fan, filters, with a gas burner, heat exchanger, pressure drop sensors (2 pcs), electric air valve (2 units); service platform; pipe chiller, pump, with an expansion tank, stream relay, gauge, thermometer, a set of closing and regulating valves; polymerization zone of the powder coating (powder polymerization oven, equipped with gates with geared motors (2 units), with the exhaust fan, gauge, thermometer; heating unit with inflow fans (2 pcs), filters, gas burner; control system (electric cabinet with touch panel control, air conditioning (2 units), complete with electrical cables and cable channels.

Technological process: past priming workpieces are moved on a trolley (not included in the supply) in the chamber of manual surface preparation for degreasing and correcting defects of cataphoresis coating by grinding; then the workpieces on the trolley (not included in the delivery package) are moved to the loading area of the powder painting area, where they are hung on the load-bearing traverses of the suspension conveyor. The workpieces are moved between the processing areas of the conveyor - a two-track system consisting of a chain and carriages.

Depending on the required color of the products, the workpieces are sent to one of the chambers of automatic powder painting, where they are painted by applying a powder coating on the workpieces. The dust not deposited on the workpiece enters the dust collector through the powder paint recovery system. The drawn air is filtered through a cyclone separator and a powder paint filter. The powder paint applied to the workpieces undergoes further polymerization in a gas drying furnace with active air circulation. Drying of the powder coating is made at a temperature of 200 - 220 ° C, after which the blanks are moved to the cooling zone.

Further, the cooled blanks are transported to the unloading zone, where they are removed from the suspensions by operators. Management and control of the technological process is carried out by the management system. The line is delivered in disassembled form.

GRI 1, 2(a) and 6

Насадка-распылитель представляет собой устройство для распыления, состоящее из распыляющей головки, модель ...

Full description

(...) с защитным колпачком и поршневого устройства, модель ... (...), состоящего из: штока, крышки, уплотнителя, прокладки, верхней пружины, втулки, толкателя, нижней пружины, корпуса, стакана, шарика и сифонной трубки. Предназначена для обработки лекарственным средством слизистой оболочки полости носа и рта путем распыления различных медицинских растворов и лекарственных средств, для индивидуального использования. Применяется в медицинских, лечебно-профилактических учреждениях, больницах, поликлиниках, медицинской промышленности, аптеках, домашних условиях.

Не предназначено для применения с ароматическими, гигиеническими и парфюмерными изделиями.

Принцип действия основан на распылении лекарственной композиции через форсунку, в которую она выдавливается под действием подпружиненного поршня через канал и последующем заполнении объема над поршнем жидкостью, поступающей из емкости по сифонной трубке, под действием вакуума при обратном ходе поршня. Поршневое устройство крепится к флакону из трубчатого боросиликатного стекла с пониженным содержанием бора, емкость флакона по 10 мл или 20 мл, внутренний диаметр горловины 12,9 мм + 0,2 мм через резиновую прокладку и завальцовывается.

При нажатии на подвижную часть устройства для распыления вместе с ним движется шток, сжимая пружину. Поршневое устройство, модель ... (...) упаковано отдельно от распыляющей головки, модель ... (...) с защитным колпачком, в полиэтиленовом пакете, в равном количестве штук. Производитель: ...

GRI 1, 2(a) and 6

Pump (dispenser-sprayer) oral is a device that is designed for spraying liquid drugs (the drug is a dosed spray for ingestion).

Full description

The composition of the device includes the following main components: a plastic case, a pump with a protruding edge, a submersible tube, a tip with an exhaust hole, a protective clip (ring). The device by sealing is installed on the neck of the container with liquid (glass bottle is not included in the package).

Principle of operation: when pressing on the spray nozzle, the force is transmitted to the stem, which, compressing the spring, moves down and pushes under the action of a spring-loaded piston a metered part of the drug from the cavity under the piston through a hole in the channel connected to the spray nozzle. As a result, there is an emission of fine particles from the spray nozzle in the form of a spray. The return of the rod to its original position is made by a spring. In this case, a discharge is created in the cavity of the device, and the liquid from the vial through the siphon tube fills the cavity of the device.

Then the cycle repeats. Geometric dimensions of the device (DhShV) 22x22x66 mm. The device is packaged in a plastic bag and a cardboard box.

GRI 1 and 6

Coater is used in the chemical and pharmaceutical industry and is an installation designed to apply sugar glaze and other shells to the surface of tablets.

Full description

The principle of operation of the coater is to apply a coating solution to the surface of the tablets by spraying it. The installation is disassembled and consists of the following main components: dispenser product spraying system peristaltic pump ..., boat, a container for applied coating with a stirrer of 150 liters, washing system cabinet for placement of pneumoelectric equipment, control panel of the dosing system, air preparation unit two-section (intake section and exhaust section) with a filtration system complete with intake air filters ..., hood system with two-section dust collector (lower section and upper section), equipped with a filtration system complete with exhaust filters, exhaust fan complete with four legs of attachment and body for fan, air system bypass, bypass for the extraction system, device for fixing the spray system, electric cabinets with current frequency converters for the exhaust fan and for the fan of the air preparation system.

Principle of operation: tablets are loaded into the installation boat. After the installation is activated, the tablets located in the perforated rotating drum of the coater make complex orbital movements. At the same time, a suspension of the coating solution is applied to the surface of the tablets by spraying with a given intensity. After completion of the spraying cycle, hot purified air under negative pressure is fed into the perforated drum of the coater and penetrates through the layer of tablets. As a result, the coating solution enveloping the tablet throughout the area is evenly dried.

Further, at the exit of the boat, tablets with a uniform coating are unloaded, homogeneous in color and texture. Main technical parameters: power supply - 400V, 50 Hz, power consumption - 56 kW, rated current -113 A, air flow - 5000 m3 / h, drum diameter 1500 mm, minimum / maximum load - 70/280 kg, minimum / maximum coating thickness 0.1/1 mm.

GRI 1, 2(a) and 6

Full description

(...) с защитным колпачком и поршневого устройства, модель ... (...), состоящего из: штока, крышки, уплотнителя, фиксатора, прокладки, верхней пружины, втулки, толкателя, нижней пружины, корпуса, стакана, шарика и сифонной трубки. Предназначена для обработки лекарственным средством слизистой оболочки полости носа и рта путем распыления различных медицинских растворов и лекарственных средств, для индивидуального использования. Применяется в медицинских, лечебно-профилактических учреждениях, больницах, поликлиниках, медицинской промышленности, аптеках, домашних условиях.

Не предназначено для применения с ароматическими, гигиеническими и парфюмерными изделиями.

GRI 1, 2(a) and 6

Full description

Не предназначено для применения с ароматическими, гигиеническими и парфюмерными изделиями.

Принцип действия основан на распылении лекарственной композиции через форсунку, в которую она выдавливается под действием подпружиненного поршня через канал и последующем заполнении объема над поршнем жидкостью, поступающей из емкости по сифонной трубке, под действием вакуума при обратном ходе поршня. Поршневое устройство крепится к флакону при помощи внутренней резьбы. При нажатии на подвижную часть устройства для распыления вместе с ним движется шток, сжимая пружину. Поршневое устройство, модель ... (...) упаковано отдельно от распыляющей головки, модель ...

(...) с защитным колпачком, в полиэтиленовом пакете, в равном количестве штук. Производитель: ...

GRI 1, 2(a) and 6

The spark and fire extinguishing system is designed to detect sparks and foci of smoldering of fire-hazardous material and extinguish the source of fire.

Full description

Delivered in unassembled and unfinished form (the package does not include water pipes and electrical wires).

The main components of the system: sound, light alarm, water spray nozzle (196 units), water quenching zone (13 units), pumping station, control unit (13 units). The package also includes: tanks, valves, cranes, hoses, detectors, regulators, buttons, filters, thermostats, sensors, connecting boxes, glass protection, communication card, brackets, cables in the amount necessary for the assembly and installation of system components.

Principle of operation: in the production of fuel pellets, fire detectors are placed in places with a high probability of spark formation or high temperature. When a danger occurs, the detectors send a signal to the control unit, from where the sound, light alarm and water extinguishing zones consisting of electromagnetic valves and water spray nozzles are purposefully launched, with the help of which a water thin curtain is created that extinguishes the fire hazardous mass. In case of insufficient pressure, the pumping station is started.

The system is accessed through the control unit.

GRI 1, 2(a) and 6

The dispenser-sprayer oral is a device that is designed for spraying liquid drugs (the drug [name omitted] is a dosed spray for oral administration).

Full description

The pump consists of the following main components: plastic housing, pump with protruding edge, submersible tube, tip with exhaust hole, protective clip (ring). The device by sealing is installed on the neck of the container with liquid (glass bottle is not included in the package).

Principle of operation: when pressing on the spray head, the force is transmitted to the stem, which, compressing the spring, moves down and pushes under the action of a spring-loaded piston a metered part of the drug from the cavity under the piston of the device into a channel connected to the spray nozzle. As a result, fine particles are ejected from the spray head in the form of a spray. The return of the rod to its original position is made by a spring. At the same time, a vacuum is created in the cavity of the device and a liquid from the vial through the siphon tube fills the cavity of the device.

Then the cycle repeats. The device is packaged in a plastic bag and a cardboard box.

GRI 1 and 6

The dispenser-spray nasal is a device that is designed for spraying liquid drugs (the drug [name omitted] - nasal spray dosed).

Full description

The pump consists of the following main components: plastic housing, pump with protruding edge, submersible tube, tip with exhaust hole, safety cap, protective clip (ring). The device by sealing is installed on the neck of the container with liquid (glass bottle is not included in the package).

Principle of operation: when pressing on the spray head, the force is transmitted to the stem, which, compressing the spring, moves down and pushes under the action of a spring-loaded piston a metered part of the drug from the cavity under the piston of the device into a channel connected to the spray nozzle. As a result, fine particles are ejected from the spray head in the form of a spray. The return of the rod to its original position is made by a spring. In this case, a discharge is created in the cavity of the device, and the liquid from the vial through the siphon tube fills the cavity of the device.

Then the cycle repeats. The device is packaged in a plastic bag and a cardboard box.

GRI 1 and 6

The anti-mold cheese treatment plant is designed for the processing of cheese in heads or blocks with a disinfectant solution and their subsequent blowing with a directed stream of dry air to remove excess moisture.

Full description

The installation consists of a drive rollergang, a tunnel for applying a disinfectant solution, a blowing tunnel. The drive rollergang is designed to move heads or blocks of cheese through a disinfection tunnel and blower tunnel. The movement of cheese is carried out by rotating rollers driven by an electric motor with a capacity of 0.55 kW via chain transmission. The receipt of cheese heads into the disinfection tunnel is read by sensors, according to which the disinfectant solution from the container located under the disinfection tunnel is automatically fed to the nozzles of the tunnel by a centrifugal pump and sprayed on the cheese heads.

The output of cheese heads from the disinfection tunnel is also read by sensors, at the signal from which the supply of disinfectant solution to the nozzles is stopped. Next, the cheese heads enter the blow tunnel, where the excess disinfectant solution is blown away by an air pump with special antibacterial filters by a directed flow of dry air under pressure. The receipt and exit of cheese heads from the blow tunnel is controlled by sensors, according to which the blowing process is started or disconnected. The equipment is automated, controlled by a controller and switches between different operating modes without operator intervention.

At the same time, the blowing tunnel is directly included in the technological process, ensuring the removal of excess disinfectant solution applied in the spraying process.

Technical characteristics: drive rollergang: length - 2254.03 mm, height - 975 mm, working weight - 350 kg; tunnel for disinfecting solution: 850x716x1355 mm (DhShV), working weight - 200 kg; blower tunnel: length - 1210 mm, width - 800 mm, working weight: 200 kg; electric power: 10 kW, voltage: 400 V, 50 Hz, equipment performance 5 - 10 cheese heads per minute (depending on the size of the heads). The equipment is supplied in disassembled form together with the components necessary for installation and operation of the installation.

GRI 1, 2(a) and 6

The equipment is designed for coloring aluminum profiles with powder paints by automatic electrostatic spraying in the conveyor clock mode.

Full description

The equipment is disassembled and consists of the following main components: 1. Conveyor system: conveyors of the loading and lifting zone, suspension conveyor for transportation of products with suspended fasteners - 4650 pcs., conveyor of the unloading and descent zone, inclined conveyor on the descent. 2. Cascade pretreatment system: tunnel with baths of chemical treatment, washing and passing - 8 pcs., equipped with a recirculation contour of spraying media, drainage, exhaust air filter, demineralized water preparation unit. 3.

Drying furnace removal of moisture residues: furnace body, insulation layer, fan of circulation of hot air - 5 pcs., blower of exhaust air, chamber of gas heating. 4. The powder spraying cabin with a recirculation system: spray chambers - 2 pcs., interchamber profile rotation system, cyclones of the vortex stream of powder capture - 2 pcs., filtration installation - 2 pcs., progressively - return lifts - 2 pcs. with automatic electrostatic paint pistols - 48 pcs. and electric cabinets - 2 pcs., screw compressor - 2 pcs., powder center of rapid color change from the powder supply station - 2 pcs. 5.

Infrared pre-curing furnace: furnace body, insulation layer, heat exchanger, fan of hot air circulation - 2 pcs., gas heater, exhaust fans with smoke pipes - 2 pcs. 6. Polymerization oven polymer coating: furnace body, insulation layer, gas heating chamber, fans of hot air circulation - 2 pcs. and axial flow - 2 pcs. 7. Electrical control and control system. The line is equipped with a fire extinguishing system - 2 pcs., a maintenance site with safety handrails, metal decking and stairs.

Principle of operation: the profile, fixed on the mounting nodes of the suspension conveyor, undergoes preliminary preparation (chemical surface treatment, degreasing, washing with water, drying) and is sent to the powder coating chambers equipped with automatic spray guns installed on the forward-return lift, which carry out electrostatic application of powder polymer paint throughout the volume of products. Further, to fix the applied powder, the profile is sent to an infrared oven. And then into the polymerization furnace, in which the powder coating is melted under the influence of high temperature and forms a durable polymer coating.

After that, the products are transported to the place of unloading, where they are manually removed from the assembly line suspension units. Main technical parameters: three-phase voltage 380 V ± 10%, frequency 50 Hz, maximum profile size: 200 mm × 200 mm × length 7000 mm; conveyor chain speed: 3.5 m / min (from 0.8 m / min to 5.0 m / min, smoothly adjustable); performance: 3181 pcs. An hour.

GRI 1, 2(a) and 6

The automatic system of external foam washing (performance 10 cubic meters / h) is used in the brewing industry for cleaning and / or disinfection of beer functioning as part of the bottling line in banks of bottling and sealing equipment (objects of washing and disinfecting the main parts of the bottling machine, a rolling machine, a conveyor of a bottling machine and a feeding machine, a conveyor of cans between the bottling and rolling machines, a protective fence for bottling and rolling machines).

Full description

The washing system consists of the following main components: a pumping station (formed by a steel frame on which: a system of suction of water supplied to the treatment facilities (2 pressure increase pumps c external motors with a set of parts that ensure suction), two dosing pumps (supplying a foam solution and disinfecting solution), a valve dosing system of reagents, a water filter); a system of pipelines with integrated zonal (in the places of a particular component) sets of spraying adjustable and slot nozzles rotating washing devices under the control of the switching system (25)

The function of cleaning with foam or the function of supplying a disinfectant solution is installed on the operator panel; the amount of injected foam or disinfectant solution is adjusted automatically by the program.

Principle of operation: the supply and spraying of a detergent foam solution or disinfectant to the surface of the treated objects using dosing pumps (from separately located canisters (not included in the delivery of goods)) and the subsequent supply and spraying of clean cold or hot water on the same treated surfaces (in order to flush the foam or disinfectant) with the help of boost pumps (from the factory pipeline system) are carried out through a system of pipelines with integrated spray nozzles and washers. The goods are delivered at a time in a partially disassembled form.

GRI 1, 2(a) and 6

The device is designed for spraying liquid drugs [name omitted] (sublingual dose, 1.25 mg / dose) and " (sublingual dose, 0.4 mg / dose).

Full description

The device consists of a spray head with a nozzle and a pressure piston mechanism (connector, piston, rod, shell cover, body, ball, spring, locker, sealer, submersible tube). The device by rolling is installed on the neck of the container with liquid (glass bottle - not included in the delivery).

The principle of operation: when pressing on the spray head, the force is transmitted to the stem, which, compressing the spring, moves down and pushes under the action of a spring-loaded piston a metered part of the drug from the cavity under the device's piston into a channel connected to the spray head nozzle. As a result, fine particles are ejected from the spray head to the place of spraying of the drug. The return of the rod to its original position is made by a spring. In this case, a discharge is created in the cavity of the device, and the liquid from the vial through the submersible tube rises into the cavity of the device.

Then the cycle repeats. The devices are packed in a plastic bag and a cardboard box. The cardboard box is marked with a label containing the following information: the name of the manufacturer (manufacturer) and (or) supplier, the name and system number of the goods, the batch number and order number, the number of pieces in one box, information about the consignee.

GRI 1 and 6

Линия порошкового окрашивания с конвейером (далее - Линия) представляет собой комплекс автоматизированного технологического оборудования для ручного окрашивания крупногабаритных деталей (гофробаков трансформаторов и иных деталей) порошковыми красками в тактовом режиме конвейера.

Full description

Основные этапы работы Линии: предназначенная к покраске деталь, закреплённая на конвейере, проходит предварительную подготовку (очистка, обезжиривание, промывка водой, сушка) и направляется в систему окрашивания. В системе окрашивания при помощи ручных пистолетов с распылителем осуществляется электростатическое нанесение порошковой полимерной краски на поверхность детали. В системе полимеризации при заданной температуре частицы окрашенного полимера (краски) расплавляются и впитываются в поверхность обрабатываемой детали.

Под воздействием естественного охлаждения атмосферным воздухом в процессе перемещения конвейером к зоне загрузки/разгрузки деталей происходит окончательное затвердевание слоя краски сформировавшейся на поверхности детали. В состав Линии входят следующие основные компоненты: система предварительной подготовки поверхности из нержавеющей стали (туннель и ванны) с тремя комплектами автоматических дверей; система сушки; система порошкового окрашивания (включая ручные пистолеты для окрашивания (4 шт.)); система полимеризации; тактовая конвейерная система, состоящая из верхнего силового пути и нижнего пути для перемещения тележек в комплекте с конвейерными цепями, возвратно-поступательным движением в агрегате подготовки поверхности, грузоподъёмностью 1300 кг; система электрического управления; комплект технической документации.

Поставка Линии осуществляется в разобранном виде.

GRI 1, 2(a) and 6

Pump (dispenser-sprayer) nasal is a device that is designed for spraying liquid drugs (the drug "..." - nasal spray dosed).

Full description

The device consists of the following main components: plastic housing, pump with protruding edge, submersible tube, tip with exhaust hole, safety cap, protective clip (ring). The device by sealing is installed on the neck of the container with liquid (glass bottle is not included in the package).

Principle of operation: when pressing on the spray head, the force is transmitted to the stem, which, compressing the spring, moves down and pushes under the action of a spring-loaded piston a metered part of the drug from the cavity under the piston of the device into a channel connected to the spray nozzle. As a result, fine particles are ejected from the spray head in the form of a spray. The return of the rod to its original position is made by a spring. In this case, a discharge is created in the cavity of the device, and the liquid from the vial through the siphon tube fills the cavity of the device.

Then the cycle repeats. The device is packaged in a plastic bag and a cardboard box.

GRI 1 and 6

The product is a mechanical hand spraying device consisting of a dispenser (syphon tube 40 mm, glass ball, base, spring (2 pcs), valve, lower and upper piston, gasket, sealing ring, lock, case), spray nozzle (nozzle, actuator) and protective cap.

Full description

The device is designed for metered spraying of the drug, is installed on the neck of the balloon (not included in the package).

Principle of operation: before use, the protective cap is removed, then a spray nozzle is installed on the dispenser; when pressing the spray nozzle, the dispenser rod moves down and squeezes part of the liquid from the cavity through the hole into the channel connected to the spray nozzle; the rod returns to its original position is made by a spring; when the rod returns to its original position in the cavity, the pressure on the ball weakens, and the liquid from the vial through the siphon tube fills the cavity; then the cycle is repeated.

GRI 1 and 6

Помпа для назального спрея тип Е (насадка - распылитель)

Full description

(далее – Насадка - распылитель) представляет собой ручное механическое устройство для распыления жидких лекарственных средств. Насадка - распылитель устанавливается на флаконы с лекарственным средством, при нажатии механизм Насадки - распылителя образует мелкодисперсную аэрозоль для точного дозирования и равномерного распределения содержимого в носовой полости.

Принцип действия: Насадка - распылитель навинчивается на горловину ёмкости с жидкостью (в комплект поставки не входит). При нажатии на распылительную насадку, усилие передаётся на шток, который сжимая пружину, движется вниз и выдавливает под действием подпружиненного поршня дозированную часть препарата из полости под поршнем через отверстие в канал, соединённый с распылительной насадкой. В результате происходит выброс мелкодисперсных частиц из распылительной насадки в виде спрея. Возвращение штока в исходное положение производится пружиной.

При возвращении штока в исходное положение создаётся разряжение и жидкость из флакона через сифонную трубку заполняет полость. Затем цикл повторяется. В состав Насадки - распылителя входят следующие основные компоненты: распыляющая головка с пылезащитным колпачком и поршневое устройство, состоящее из опоры, штока, крышки фиксатора, уплотнителя, пружины, манжеты, корпуса, сифонной погружной трубки. Основные параметры: длина погружной трубки 42 ± 1 мм; внутренний (посадочный) диаметр Насадки – распылителя 18,2 ± 0,3 мм.

GRI 1 and 6

Ручное механическое устройство предназначено для распыления (разбрызгивания) различных жидкостей, средств бытовой химии в виде жидкостей, воды, средств автокосметики и пр..

Full description

Устройство состоит из следующих основных элементов, изготовленных из пластмассы: распылительная форсунка с поворотным механизмом, корпус, нажимной курок, крышка с осевым отверстием в верхнем торце и с резьбой на внутренней стороне, погружная трубка длиной 246 мм, прокладка, поршень, а также стеклянный шарик (обратный клапан) и пружина из нержавеющей стали. Устройство навинчивается на горловину ёмкости (не входит в комплект поставки) посредством внутренней резьбы на крышке.

Принцип действия: при нажатии на нажимной курок поршень поднимается вверх и сжимает пружину. При этом шарик открывает камеру для жидкости, в которую через погружную трубку поступает жидкость, и далее через выпускной канал жидкость проходит через заслонку в распылительную форсунку для распыления. При отпускании нажимного курка шарик блокирует камеру для жидкости, не позволяя ей уходить обратно в погружную трубку, сохраняя фиксированный объём жидкости, который будет распылён при следующем нажатии нажимного курка.

GRI 1 and 6

A spray gun in the form of a plastic bottle with a screwing nozzle, is designed to spray household chemicals for the house from the line of ...

Full description

The product is not intended for spraying aromatic substances, diamondin and similar substances for hygienic purposes. The bottle is made of high-density polyethylene, has an elongated shape, a volume of 500 ml and measured divisions applied to the surface (to obtain solutions of household chemicals of the required concentration). The screw nozzle with a special spray head for setting the off/foam/spray mode consists of the following main elements: casing, valve housing, 28/400 cover, submersible tube, trigger, foam nozzle (parts are made of polypropylene), gasket, valve, piston, nozzle (parts are made of polyethylene), spring (made of acetal).

The screwing nozzle is wound up on the neck of the bottle with the help of a thread, providing a sealed blockage of the bottle.

Principle of operation: when pressing the trigger, the piston and spring move in the direction of the casing, while the valve allowing the household chemical (product) to flow only in one direction, blocks the path for the product through the submersible tube and the product is sprayed through the nozzle. When the user releases the trigger, the spring returns the piston to its original position, and the valve moves to a position that allows the product to rise up the submersible tube, replacing the product sprayed during the previous pressing.

The goods are supplied in cardboard boxes, which contain 30 vials and separately 30 nozzles in three plastic bags.

GRI 1 and 6

The line is equipment designed for powder staining of blanks (iron pumps).

Full description

The method of powder staining is that the paint particles, when passing through the powder-blasting device, are electrostatically charged and sprayed on the workpieces in the form of a cloud aimed at the workpiece. The paint particles are attracted to the grounded workpiece on which they settle. The line consists of the following components: loading station for hanging parts on the suspension; masking area to isolate parts of parts, not subject to staining; paint chamber (dimensions 3700 x 1500 mm); gas drying furnace for polymerization of powder coating (dimensions 3300 x 1500 mm); cooling tunnel (dimensions 3900 x 1500 mm); unloading station for unmasking parts and removing painted parts from suspensions; conveyor for automatic movement of parts between sections of the line (the total length of the conveyor track is 33 m); electro-pneumatic locking devices to suspend the movement of hangings on a moving chain - 7 pcs. ; drying furnace exhaust pipe (Ø 250 mm); supply ventilation unit for cooling parts after drying in the furnace (model ..., power of 3 kW; exhaust ventilation system to remove heated air from the cooling zone outside the room (model ..., power of 3 kW; cyclone separator for primary filtration of powder dust (basic dimensions 4700/5700 x 1600 x 1600 mm); terminal filter for secondary dust filtering after cyclone separator (dimensions 2350 x 2150 mm); main control cabinet (working voltage - 400 V), Control voltage - 24 V, 50 Hz frequency.

The technological process of staining is as follows. The blanks are loaded to the loading station, in which the parts are hung on the suspension. Then, at the masking station, parts of parts that are not subject to painting are manually isolated. The workpieces are moved between the processing areas by the conveyor - a two-track system consisting of a chain and trolleys. Details along the conveyor go to the painting chamber, where staining occurs by applying a powder coating on the workpieces. When the paint passes through the powder-blasting device, they are electrostatically charged with a high voltage of about 10 kV and sprayed as a cloud aimed at the workpiece.

The workpieces pass through the painting chamber at a constant speed, while the paint particles are attracted to the grounded workpiece on which they settle and fix. The settling of the paint on the workpiece occurs until, when a certain thickness is reached, the coating becomes dielectric. The dust not deposited on the workpiece enters the dust collector through the extraction system. The drawn air is filtered through the cyclone separator and the terminal filter. The powder paint applied to the workpieces undergoes further polymerization in a gas drying furnace with active air circulation.

Drying of the powder coating is carried out at a temperature of 180 ° C to 220 ° C, after which the blanks are moved to the cooling tunnel. The conveyor transports the cooled blanks to the unloading station, where they are removed from the suspensions. The control of the line is carried out by the central control cabinet. The line is delivered in disassembled form.

GRI 1, 2(a) and 6

What import requires

Veterinary and sanitary control

Goods fall under supervision by their type and characteristics

Sanitary and epidemiological supervision (control)
rule for the whole chapter 84
Материалы, оборудование, вещества, устройства, применяемые в сфере хозяйственно-питьевого водоснабжения и при очистке сточных вод, в плавательных бассейнах; Продукция машиностроения и приборостроения производственного, медицинского и бытового назначения, кроме запасных частей к транспортным средствам и бытовой технике (за исключением контактирующих с питьевой водой и пищевыми продуктами); Продукция, изделия, являющиеся источником ионизирующего излучения, в том числе генерирующего, а также изделия и продукция (товары), содержащие радиоактивные вещества; Строительное сырье и материалы, в которых гигиеническими нормативами регламентируется содержание радиоактивных веществ, в том числе производственные отходы для повторной переработки и использования в народном хозяйстве, лом черных и цветных металлов (металлолом); Оборудование, материалы для воздухоподготовки, воздухоочистки и фильтрации; Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры
Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

ТР ТС 010/2011Safety of machinery and equipment
- Машины и оборудование для коммунального хозяйства — declaration of conformity or certificate of conformity (part of the heading)
- Оборудование технологическое и аппаратура для нанесения лакокрасочных покрытий на изделия машиностроения — declaration of conformity or certificate of conformity (part of the heading)
ТР ЕАЭС 043/2017About requirements to means of ensuring fire safety and fire extinguishing
- Дозаторы установок пенного пожаротушения — certificate of conformity
- Оросители водяные и пенные спринклерные и дренчерные — certificate of conformity
- Модули установок пожаротушения тонкораспыленной водой автоматических — certificate of conformity
- Модули установок газового пожаротушения автоматических — certificate of conformity
- Модули установок газопорошкового пожаротушения автоматических — certificate of conformity
- Модули установок порошкового пожаротушения автоматических — certificate of conformity
- Распределительные устройства автоматических установок газового пожаротушения — certificate of conformity
- Генераторы огнетушащего аэрозоля — certificate of conformity
- Установки пожаротушения роботизированные — certificate of conformity
- Пеносмесители — declaration of conformity
- Стволы пожарные лафетные — certificate of conformity
- Генераторы пены — certificate of conformity
ТР ТС 004/2011Safety of low-voltage equipment
- утюги, гладильные машины, пароочистители (парогенераторы) — certificate of conformity
- паровые щетки, швабры — certificate of conformity
ТР ТС 020/2011Electromagnetic compatibility of technical means
- утюги, гладильные машины, пароочистители (парогенераторы) — certificate of conformity
- паровые щетки, швабры — certificate of conformity
ТР ЕАЭС 037/2016Restriction of the Use of Hazardous Substances in Electrical and Radio Electronics Products
- утюги, гладильные машины, пароочистители (парогенераторы) — declaration of conformity
- паровые щетки, швабры — declaration of conformity

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

How it is done in practice

Valid documents in the EAEU unified register for subheading 8424 89: certificates 416, declarations 2,213.

By technical regulation: ТР ТС 020/20111,664ТР ТС 010/20111,395ТР ТС 004/2011887ТР ЕАЭС 043/2017200ТР ТС 005/2011148
Schemes: 1д1,7901с2312д1734д1723с153The letter after the scheme number shows the form: certification or declaration of conformity.
Most active certification bodies: РУП «Белорусский государственный институт метрологии»ФГБУ «Всероссийский ордена «Знак Почета» научно-исследовательский институт противопожарной обороны Министерства Российской Федерации по делам гражданской обороны, чрезвычайным ситуациям и ликвидации последствий стихийных бедствий»ФГБОУ ВО «Академия Государственной противопожарной службы Министерства Российской Федерации по делам гражданской обороны, чрезвычайным ситуациям и ликвидациям последствий стихийных бедствий»
Manufacturers outside the EAEU: China1,052Germany95Italy75Türkiye67United States47Poland25

Manufacturers of these goods →Check a supplier’s document by its number →

Dual use

Expert review needed

Goods fall under control by their technical characteristics, regardless of the code. Supplying without a licence when one is required is a criminal offence

Раздел 1 · Категория 1. Специальные материалы и связанные с ними оборудование и снаряжение
- Системы, оборудование и компоненты → Оборудование, специально разработанное или модифицированное для обезвреживания самодельных взрывных устройств, приведенное ниже, а также специально разработанные компоненты и принадлежности для него:1.1.6.2 Подрыватели (разрушители)
Раздел 1 · Категория 3. Электроника
- Системы, оборудование и компоненты3.1.3 Терморегулирующие системы охлаждения диспергированной жидкостью, использующие оборудование с замкнутым контуром для перемещения и регенерации жидкости в герметичной камере, в которой жидкий диэлектрик распыляется на электронные компоненты при помощи специально разработанных распыляющих сопел, применяемых для поддержания температуры электронных компонентов в пределах их рабочего диапазона, а также специально разработанные для них компоненты
Раздел 5 · ввоз по соображениям национальной безопасности · Категория 5. Оборудование для работы со взрывчатыми веществами и обезвреживания взрывных устройств
- Оборудование для обезвреживания и подавления самодельных взрывных устройств5.2.2 Подрыватели (разрушители)

Checked: one control list of six: dual-use goods (Russian Government Decree No. 1299 of 19.07.2022). The other five lists (nuclear, nuclear dual-use, missile, chemical, biological) are not checked here.

Tariff preferences

The code is on the EAEU list of preferential goods: for goods originating in a beneficiary country the duty is lower

Least developed countrieszero rate0%

46 countries

Burkina Faso, Guinea, Eritrea, Congo - Kinshasa, Timor-Leste, Afghanistan, Mauritania, Yemen, Cambodia, Lesotho, Laos, Bangladesh, Nepal, Tanzania, Palestinian Territories, Angola, Benin, Burundi, Haiti, Gambia, Guinea-Bissau, Djibouti, Zambia, Kiribati, Liberia, Madagascar, Malawi, Mali, Mozambique, Niger, Rwanda, Senegal, Myanmar (Burma), Sudan, Sierra Leone, Uganda, Chad, South Sudan, Syria, Solomon Islands, Comoros, Togo, Tuvalu, Ethiopia, Somalia, Central African Republic

The preference requires a document of origin and compliance with the direct consignment rule; customs checks the right to it at declaration.

Payments on import

Duty for this code: 0%. On top of the duty, on import into Russia you pay VAT of 22% (unless the goods are VAT-exempt) of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

Import VAT in EAEU countries

Russia22%Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025)
Kazakhstan16%Tax Code of Kazakhstan, Art. 503(1), from 01.01.2026
Belarus20%Tax Code of Belarus, Art. 122
Armenia20%Tax Code of the Republic of Armenia
Kyrgyzstan12%Tax Code of the Kyrgyz Republic

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

May be VAT-exempt

The exemption under list No. 1042 applies if the goods match the description and are registered as a medical device:

8424 — Оборудование санитарно-гигиеническое, средства перемещения и перевозки 94 5100 (оборудование дезинфекционное; оборудование стерилизационное; оборудование моечное, оборудование для санитарной обработки; оборудование для очистки и обогащения воздуха; средства перемещения и перевозки медицинские (носилки, тележки и другие)

Calculate the whole deal →Quick payment estimate →

OKPD2 code

The match is set for the whole subheading, by the first six digits of the code

28.29.22 — Огнетушители, распылители, пароструйные или пескоструйные машины и аналогичные механические устройства, кроме предназначенных для использования в сельском хозяйстве

Correspondence keys of the Russian Ministry of Economic Development, edition of 20.07.2023. The ministry’s caveat: Ключи отражают возможные соответствия между кодами на уровне первых шести знаков ТН ВЭД ЕАЭС (основанной на ГС) и кодами ОКПД 2 (основанного на КПЕС) по состоянию на 1 января 2022 года. Предлагаемые соответствия не являются исчерпывающими и предназначены для использования в качестве вспомогательного материала для облегчения работы по установлению возможных вариантов корреляции кодов классификаторов в отношении соответствующих категорий товаров.

Настоящие переходные ключи (сопоставительные таблицы) разработаны на основе данных агентства Евростат Комиссии Европейского союза по корреляции кодов Гармонизированной системы описания и кодирования товаров (ГС) 2022 года и Статистической классификации продукции по видам экономической деятельности в Европейском союзе (КПЕС) 2008 года. Ключи отражают возможные соответствия между кодами на уровне первых шести знаков ТН ВЭД ЕАЭС (основанной на ГС) и кодами ОКПД 2 (основанного на КПЕС) по состоянию на 1 января 2022 года. Предлагаемые соответствия не являются исчерпывающими и предназначены для использования в качестве вспомогательного материала для облегчения работы по установлению возможных вариантов корреляции кодов классификаторов в отношении соответствующих категорий товаров. Услуги не являются объектом классификации в ТН ВЭД ЕАЭС и не включены в переходные ключи. По мере внесения изменений в ОКПД 2 и ТН ВЭД ЕАЭС переходные ключи при необходимости подлежат актуализации.

The right code is in the HS code search.