8428 90 800 0 — Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics): other machinery: other
Other lifting, handling, loading or unloading machinery (for example, lifts, escalators, conveyors, teleferics): other machinery: other
Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it
EEC Council Decision No. 80 of 14.09.2021
None: EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.
Whether a measure applies to your goods depends on their characteristics and the shipping documents
Exempt if it is a medical device on the exemption list. Otherwise 22%.
Where it sits in the nomenclature
Section XVI. Machinery and mechanical appliances; electrical equipment; parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
- 84Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
- 8428Lifting, handling, loading or unloading machinery, e.g. lifts, escalators, conveyors, teleferics (excl. pulley tackle and hoists, winches and capstans, jacks, cranes of all kinds, mobile lifting frames and straddle carriers, works trucks fitted with a crane, fork-lift trucks and other works trucks fitted with lifting or handling equipment)
- 8428 90Machinery for lifting, handling, loading or unloading, n.e.s.
- 8428 90 800 0you are here
Explanatory notes to heading 8428 7 paragraphs
Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.
8428 Other lifting, handling, loading or unloading machinery (e.g., lifts, escalators, conveyors, teleferics): 8428 10 – Lifts and skip hoists 8428 20 – Pneumatic elevators and conveyors – Other continuous-action elevators and conveyors, for goods or materials: 8428 31 – – Specially designed for underground use 8428 32 – – Other, bucket type 8428 33 – – Other, belt type 8428 39 – – Other 8428 40 – Escalators and moving walkways 8428 60 – Teleferics, chair-lifts, ski-draglines; traction mechanisms for funiculars 8428 90 – Other machinery
With the exception of lifting and handling machinery of headings 8425 to 8427, this heading covers a wide range of machinery for the mechanical movement of materials, goods, etc. (lifting, conveying, loading, unloading, etc.). They are included in this heading even if they are specifically intended for use in a separate branch of industry, such as agriculture, metallurgy, etc. This heading includes loading -
handling equipment not only for solid materials but also similar equipment for liquids or gases. However, the heading excludes liquid elevators of heading 8413, and also floating docks, caissons and similar marine lifting and salvage appliances working solely on the principle of hydrostatic buoyancy (heading 8905 or 8907). The provisions of the Explanatory Note to heading 8426 apply, mutatis mutandis, to the machinery of this heading as regards self-propelled and other mobile machines, multi-function machines, and lifting, loading, handling, etc., machines designed for use as part of other machines or for mounting on the transport equipment or vessels of Section XVII. The heading covers lifting or handling machines usually employing systems of pulleys, winches or jacks, which often incorporate a large amount of static steel structures, etc. These static structural elements (e.g., pylons specially designed for aerial ropeways, etc.) are classified in this heading when they are presented as parts of a more or less complete handling machine. When presented separately, they fall in heading 8431 provided they are fitted with, or designed to be fitted with, the mechanical elements necessary for the working of the moving parts of the whole installation (wheels, rollers, pulleys, running or guide rails and other parts). Otherwise these structural elements fall in heading 7308. These most complex machines include: (I) MACHINES OF THE DISCONTINUOUS-ACTION TYPE (A) Lifts are usually operated by winch and cable or by a plunger actuated by water, air or oil. They are used for raising or lowering a passenger cage or goods platform between vertical guides and are usually fitted with counterweights. Control, stopping, safety and other equipment, whether or not electrical, is also classified in this heading provided it is presented with the lift. The heading also covers hand-operated lifts. Lifts or hoists driven by rack and pinion also fall in this category. These lifts and hoists consist of a lift car fitted with a motor driving the pinion, and a mast fitted with a toothed rack. On engaging with the pinion, the rack guides the movement of the lift car along the mast downwards or upwards at a controlled speed. This category includes so-called "ship lifts", i.e., very powerful installations using hydraulic systems or jacks to raise a water-filled lock chamber containing a vessel from one canal level to another (replacing conventional locks). (B) Skip hoists are a kind of lift for raising containers of bulk materials along an inclined or vertical shaft. They are used for raising coal from pits, for delivering ore, limestone, fuel, etc., to blast furnaces, lime kilns and other installations. The heading also covers skips for skip hoists, i.e., large metal containers or hoppers, often fitted with automatic
opening bottom. Mine skips are usually equipped with a cab for miners, which is installed on top of the cargo bunker. (B) Certain lifting machines: (1) Lifting mechanisms such as a lifting gate, consisting of a winch mounted on a bipedal or tripod support. (2) Drilling derricks for the lifting of drilling pipes, etc., in the drilling of oil and other wells (other than those installed on trucks, etc., see the HS Explanatory Note to heading 8426). (3) Telfers operate on a principle similar to bridge cranes or bridge overloaders. Lifting trolleys move (sometimes for a considerable distance) on rails fixed on pylons at a certain height. (G) Cable cars are large winch-powered installations designed mainly for the delivery of passengers or goods in the mountains. They consist of load-bearing and traction ropes fixed on pylons, and two cabins (or buckets, containers, etc.) that rise and fall along the load-bearing rope. (D) Funiculars operate on the same principle as cable cars, only their trailers move on rails. In this case, the heading covers only the traction mechanism and the winch and excludes the trailers (heading 8605) and the rail track (heading 7302 or 8608, depending on the type). (E) Wagon rollers are platforms equipped with guide rails or grooves in such a way that the wagon can be placed in the desired position, fixed in this position and then empty it by tilting, overturning or rotating the entire rolling mechanism by means of jacks or other lifting system. This heading also includes wagon-shaking mechanisms which facilitate emptying of bunker-type wagons. (A) Elevators are used to continuously lift the flow of goods or people in a vertical or inclined direction. They consist mainly of a number of carriers of various types, attached at intervals to the connecting device, which rotates as a b infinite circuit. Elevators include: bucket lifts for bulk or granular materials, platform lifts for boxes, parcels, etc., noria for lifting bags, barrels, straw bundles, sheaves and other loads, as well as multi-cab continuous lifts for passengers, etc. (B) Escalators and moving tracks. Conveyors are used to transport goods usually in a horizontal direction, sometimes over very long distances (in mines, quarries and other facilities). They include: (1) Conveyors that move goods continuously by moving load-bearing or pushing elements, for example, bucket, tray, plate conveyors; scraper or screw conveyors (in which materials are fed through the trough, respectively, by a pushing plate or worm); belt, plate, chain and other conveyors. (2) Conveyors consisting of a group of rollers with a drive engine (for example, conveyors that are used to supply steel to a crimping mill). In this
The heading also includes roller conveyors without drive, which are usually installed on bearings (for example, horizontal roller tracks for the transport of boxes and other containers, and gravity roller conveyors). However, this heading does not cover similar equipment not fitted with rollers, such as straight, curved or spiral gutters (heading 7308, 7325 or 7326, depending on the species). (3) Vibrational or swinging conveyors, driven by the oscillating or reciprocating movement of the tray that carries the goods. (D) Pneumatic lifts and conveyors (e.g. pneumatic tube conveyors) in which small containers (for documents, small parts or other articles) or bulk materials (grain, straw, hay, sawdust, pulverized coal, etc.) are transported through the pipe by air (including similar machines for transporting and cleaning grain). (E) Roller supports (with roller wheels for furniture), similar to roller conveyors. They consist of a series of tubular racks, reinforced in the floor of the production room. The top of each support consists of a roller on bearings rotating freely in all directions, so that all supports are a roller table system (for example, to move sheet metal in rolling mills). (F) Cable lifting or towing machines, including endless towing ropes or chains that are in continuous motion. These machines are designed for rolling back wagons (e.g. mine trolleys and rollover trolleys), for towing barges, sledges, etc., for transporting passengers (ski lifts), etc. (III) OTHER SPECIAL OR TRANSPORT MACHINES (A) Mechanisms for moving locomotives or wagons, designed to transfer locomotives, trolleys, etc. from one path to another. (B) Pushers of various types of wagons, e.g.: (1) Apparatus fitted between the rails, usually consisting of two pistons operated by a mechanical actuator, which make reciprocal movement, engage with the axles and push the wagon trolleys forward. (2) Hydraulic plunger or piston machines for pushing mine trolleys into mine cages, etc. (3) Self-propelled single-wheeled cars moving on one rail of the railway track. They should be held by a walking worker in the same way as wheelbarrows. They are driven by small gasoline engines. It should be noted that small tractors, sometimes referred to as “wagon pushers” and used for this purpose, are not included in this heading (heading 8701). (C) Mechanical loaders used for loading coal, ore, excavated earth, pebbles, sand and other bulk materials. These machines are usually used in conjunction with a conveyor or elevator (swinging conveyor-reloader, lift conveyor-reloader and other mechanisms). (D) Auxiliary mechanical devices for manipulating pneumatic, hydraulic or electrical hand tools
(drills, pneumatic hammers and others). These appliances serve to hold the tool or to feed it during work. For example, pneumatic pushers and pneumatic tool feeds; boring and drilling appliances, drill carriages; mechanical balancing devices for suspending the tool during work. However, the heading excludes simple static supports and the like. (E) Industrial robots specially designed for lifting, moving, loading or unloading. (F) Mechanical ladders consisting of extending sections, operated by some mechanism (e.g., a pulley tackle or a winch). (G) Mechanically propelled wheeled platforms (of the dolly type) for mounting and manoeuvring cinematographic cameras. (H) Remote-controlled mechanical manipulators, whether stationary or mobile, for handling radioactive products, consisting of a lever mechanism located outside the protective cell and operated by the hand of the operator, and a lever mechanism located inside the cell which reproduces the movements of the operator. The movement is transmitted by mechanical, hydraulic, pneumatic or electrical devices. Manipulators held in the hands during work (as hand tools) fall in heading 8203, 8204 or 8205. (IJ) Self-propelled or non-self-propelled platforms for container or pallet operations, used at airports for loading and unloading aircraft. This equipment consists essentially of a lifting platform supported by two diagonal crossed beams. The platform is fitted with a moving belt for conveying loads. This equipment is not designed for transporting containers or pallets even over short distances. It is positioned unloaded beside the aircraft and is used only directly at the aircraft. (K) Automatic bottle palletisers – electrically driven machines designed for automatically aligning empty bottles in rows of a given length (using powered or roller conveyors) and then moving the aligned rows onto a pallet for layer stacking. These palletisers, which do not perform filling, closing or sealing operations on bottles, nor the affixing of labels or stickers to bottles, may be used either separately or as part of production lines in combination with other machines performing such functions as filling or packing bottles in heat-shrinkable packing material. (L) Patient lifts. These are devices with a supporting structure and a seat for raising and lowering a seated person, e.g., into a bath or onto a bed. The movable seat is fixed to the supporting structure by means of ropes or chains. (M) Stair lifts. These are lifting devices fitted with a load platform, fixed to the handrail, to the wall or to the steps of a staircase and used for moving disabled persons or wheelchairs with disabled persons down or up the staircase. Lifting or handling devices are often used for furnaces, converters, rolling mills and other installations. For example, machines for charging, positioning or discharging the workpieces; for operating doors, lids, fireboxes and other devices; tipping or tilting machines. When these machines form separate constructionally distinct units which can be clearly identified
from furnaces and other installations, they fall in this heading even if presented together with the furnaces and other installations. The following machines may serve as examples: (1) Coke-oven discharging machines, which move backwards and forwards behind a row of ovens. They are equipped with a mechanical ram which opens the doors and discharges the oven. (2) Ram or piston charging machines for converters of the "Siemens-Martin" type and other units. (3) Special lifting machines for opening the lids of metallurgical roasting or soaking pits or for unloading ingots. (4) Manipulators, tilters and other devices for performing movement operations on ingots, forgings and other articles. (5) Machines used in certain types of furnaces for charging or discharging materials during process operations by means of cylinders fitted with mechanical pushers or rams. It should, however, be noted that this heading excludes lifting or handling machines designed to be fitted in furnaces, converters, etc., or to form a single unit with such installations, provided that they are presented together with the furnaces and other installations, etc. (see headings 8417, 8454, 8455 and others). When presented separately, these machines fall in this heading. It should be noted that this heading also excludes mechanical stokers, mechanical grates and similar appliances (heading 8416). PARTS Subject to the general provisions regarding the classification of parts (see the General Explanatory Note to Section XVI), parts of the machines of this heading fall in heading 8431. This heading also excludes: (a) liquid elevators of the bucket, chain, screw, band or similar types (heading 8413); (b) machinery for sorting, screening, separating or washing earth, stone, ores or other mineral substances in solid form (heading 8474); (c) passenger boarding bridges (heading 8479); (d) machines and apparatus used solely or principally for lifting, handling, loading or unloading boules, wafers, semiconductor devices, electronic integrated circuits or flat panel displays (heading 8486); (e) turntables of heading 8608; (f) dumpers (heading 8704).
Official text adopted by a Recommendation of the EEC Board
Notes to chapter 84 — Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof 24 items
Notes
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
1. This group does not include:
(a) millstones, grinding stones or other articles of Chapter 68;
(b) equipment or devices (e.g. pumps) of ceramic materials and ceramic parts of machinery or devices of any material (Chapter 69);
(c) laboratory glassware (heading 7017); equipment, devices or other articles for technical purposes or parts thereof of glass (heading 7019 or 7020);
(d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81);
(e) vacuum cleaners of heading 8508;
(f) electromechanical household appliances of heading 8509; digital cameras of heading 8525;
(g) radiators for articles of Section XVII; or
(h) manual mechanical brushes for floor cleaning, without engine (heading 9603).
2. Subject to the provisions of Note 3 to Section XVI and Note 11 to this Chapter, a machine or device which meets the description in one or more of headings 8401 to 8424 or heading 8486 and at the same time the description in one or more headings 8425 to 8480 is included in the relevant heading of the first series of headings or in heading 8486 as the case may be, and not in the second series.
(A) However, heading 8419 does not cover:
(i) seed germination equipment, incubators or brooders (heading 8436);
(ii) machinery for wetting grains (heading 8437);
(iii) diffusion apparatus for the extraction of sugary juice (heading 8438);
(iv) equipment for the heat treatment of textile yarn, textile materials or finished textile articles (heading 8451); or
machining equipment, assemblies or laboratory equipment in which temperature change, even if necessary, is an auxiliary process.
(B) Heading 8422 does not cover:
(i) sewing machines for sewing bags or similar packagings (heading 8452); or
(ii) office equipment of heading 8472.
(C) Heading 8424 does not cover:
(i) paint-blasting printing presses (heading 8443); or
(ii) water jet cutting machines (heading 8456).
3. A machine for processing any material which corresponds to the description of heading 8456 and simultaneously to the description of heading 8457 to 8461, 8464 or 8465 is classified in heading 8456.
4. Heading 8457 covers only metalworking machines other than lathes (including multipurpose lathes) which may perform different types of machining operations by:
(a) the automatic replacement of tools from a tool store or similar device in accordance with the processing program(s);
(b) the automatic application simultaneously or sequentially of different processing heads operating at a fixed workpiece (assembly single-position machines); or
(c) automatic movement of the workpiece to various processing heads (multi-position machines).
5. For the purposes of heading 8462, the term “longitudinal cutting line” for flat products means a process line consisting of a winder, a correct device, a longitudinal cutting device and a winder. The term “cross-cutting line” for flat products means a process line consisting of a unwinder, a correct device and a cutting device.
6. (A) For the purposes of heading 8471, the term “computers” means machines capable of:
(i) store the processing program or programs and at least the information currently necessary to execute the program;
(ii) be freely reprogrammable according to user requirements;
(iii) perform user-defined arithmetic calculations; and
(iv) perform, without human intervention, a processing program requiring the computer to modify its actions by making logical decisions during processing.
(B) Computing machines can be made in the form of systems consisting of a different number of individual blocks.
(C) Subject to the provisions of Notes (D) and (E) below, a block shall be treated as part of a computing system if it satisfies all of the following conditions:
(i) exclusively or principally used in a computing system;
(ii) is capable of being connected to the central processing unit either directly or through one or more other units; and
(iii) is capable of receiving or presenting information in such form (codes or signals) as may be used by the system.
Separately presented computer units are classified in heading 8471.
However, keyboards, X-Y-coordinate input devices and disk storage units which satisfy the conditions laid down in Notes (B) (ii) and (B) (iii) above are in all cases to be regarded as blocks of heading 8471.
(D) Heading 8471 does not cover the following devices, presented separately, even if they meet all the conditions of Note 6(C) above:
(i) printers, copiers, facsimile machines, combined or not;
(ii) apparatus for receiving or transmitting voice, images or other data, including apparatus for providing communications over a wired or wireless communication network (for example, on a local or wide area network);
(iii) loudspeakers and microphones;
(iv) television cameras, digital cameras and video recording cameras;
(v) monitors and projectors not combined with television reception equipment.
(E) Machines containing or working in conjunction with a computer and performing specific functions other than information processing are classified in the headings according to their specific functions or, if this is not possible, in the residual headings.
7. Heading 8482, inter alia, covers polished steel balls whose maximum and minimum diameter does not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is smaller. Other steel balls are classified in heading 7326.
8. A machine which is used for more than one purpose shall be classified as if its primary purpose were the only one.
Subject to the provisions of Note 2 to this Chapter and Note 3 to Section XVI, a machine whose primary purpose is not described in any heading or a machine in which none of its functions is primary is classified in heading 8479, unless the context otherwise provides. Heading 8479 also includes machinery for the manufacture of ropes or ropes (e.g. knitting machines) from metal wire, textile yarn or other materials or from a combination of such materials.
9. For the purposes of heading 8470, the term “pocket” applies only to devices not exceeding 170 x 100 x 45 mm.
10. For the purposes of heading 8485, the term additive manufacturing (also referred to as 3D printing) means the formation of physical objects based on a digital model by successively adding and layering, sealing and curing a material (e.g., metal, plastics or ceramics).
Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machines as described in heading 8485 are classified in that heading and no other heading of the Nomenclature.
11. (A) Notes 12(a) and 12(b) to Chapter 85 also apply to the terms “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this note and in heading 8486. However, in this note and in heading 8486, the term "semiconductor devices" also applies to photosensitive semiconductor devices and LEDs.
(B) In this note and in heading 8486, the term “plane display panel production” covers the fabrication of a flat panel of substrates. It does not cover the production of glass or the installation of printed circuit boards or other electronic components on flat panels. The term "flat display panel" does not apply to cathode ray tube technology.
(C) Heading 8486 also includes machinery and apparatus used exclusively or principally for:
(i) producing or eliminating defects in masks and patterns;
assemblies of semiconductor devices or electronic integrated circuits;
(iii) lifting, manipulating, loading or unloading boules, plates, semiconductor devices, electronic integrated circuits and flat display panels.
(D) Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machinery meeting the description in heading 8486 is classified in this heading and in no other heading of the Nomenclature.
Subheading notes
English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.
1. For the purposes of subheading 8465 20, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.
2. For the purposes of subheading 8471 49, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).
3. For the purposes of subheading 8481 20, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481.
4. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.
Additional notes
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
1. For the purposes of subheadings 8407 10 and 8409 10, the term “aviation engines” shall apply only to engines intended for assembly with an air or rotor.
2. В подсубпозицию 8471 70 300 0 также включаются устройства считывания компакт-дисков, являющиеся запоминающими устройствами вычислительных машин, которые предназначены для считывания сигналов с CD-ROM, аудиокомпакт-дисков и фотокомпакт-дисков и снабжены разъемом для наушников, регулятором громкости или кнопкой пуск/стоп.
Additional notes of the Eurasian Economic Union
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
1. For the purposes of subheading 8482 10 900 1, the term “gross mass” means the total mass of the goods with all kinds of packaging materials and packagings ensuring their safety during storage and transport. The total weight of the goods does not include the mass of packaging materials or containers that are clearly suitable for reuse.
2. For the purposes of subheading 8415 81 001 0, the term “special production facilities” means premises in which the maintenance of precise values of temperature and humidity is due to the operational requirements of the equipment installed therein, such as machines, computers, switching equipment, surgical equipment, etc., or to the operations performed therein.
3. In subheadings 8427 20 190 1, 8427 90 000 1 and 8436 80 100 1, the date of manufacture shall be determined on the basis of the technical documentation of the manufacturer (technical passport, instruction manual) and the manufacturer's plate, which shall be fixed in a conspicuous, easily accessible place of the machinery and shall not be replaced during operation. If the manufacturer's technical documentation and the manufacturer's plate contain conflicting information about the date of manufacture or there is no information about the manufacturer of the equipment on the date of manufacture, then this technique is considered a technique, since the release of which more than 3 years have passed.
If the manufacturer's information indicates only the year of manufacture, then the date of manufacture of the equipment is considered 1 July of the year of manufacture; if the month and year of manufacture are indicated, the date of manufacture is the 15th day of the month specified in the manufacturer's information.
4. For the purpose of classification of goods in subheading 8482 10 900 1 in the states, whose territories constitute the customs territory of the Eurasian Economic Union, when applying the term "French border of the country of importation", the country of import is understood as the customs territory of the Eurasian Economic Union.
5. For the purpose of subheading 8407 10 000 3, the term “take-off power” means the maximum power developed by an aircraft piston engine.
“Take-off power” is specified in the technical documentation and (or) accompanying documents, measured in kilowatts or horsepower (1 kW corresponds to 1.35962 hp).
6. В подсубпозиции 8421 99 000 5 термин «элементы мембранные рулонного типа для фильтрования или очистки жидкостей» означает устройства цилиндрической формы, состоящие из:
- internal plastic perforated tube on which spirally wound membrane bags;
- drainage material located between membrane bags and glued to them on three sides.
The membrane package consists of a twice folded band of membrane containing an extruded grid inside.
At the ends of the membrane roll-type element, fixing discs and sealing cuffs can be installed.
7. For the purposes of subheading 8415 20 000 2, the term “in a single enclosure” refers to air conditioning units (air conditioners) in which all the elements are combined in a single enclosure, frame or platform.
The term "in a single housing" also applies to air conditioning units (air conditioners) in which the refrigeration compressor, which is part of a given air conditioning unit (air conditioner), is located separately, that is, not combined with the rest of the elements in one housing, on one frame or on one platform.
Classification rulings for this code (33)
Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.
Система трансформации оркестровой ямы представляет собой подъёмную электромеханическую платформу, которая позволяет трансформировать пространство зрительного зала, изменять уровень оркестровой зоны (уровень ямы -2,4 м), обеспечить дополнительные 3 или 5 рядов зрительских кресел, которые дают суммарно 88 дополнительных зрительских мест (в уровень зала – 0,65 м), а также предоставляет возможность подъёма платформой реквизита, декораций или участников спектакля для обеспечения аудиовизуальных эффектов.
Full descriptionCollapse description
Система трансформации состоит из следующих основных компонентов: мобильная металлическая платформа с деревянным покрытием (несущая металлоконструкция, платформа); система сменных кресел (электродвигатели 2 шт., электромеханические телескопические приводы 8 шт., угловые редукторы 4 шт., карданные валы 14 шт., зрительские кресла 88 мест); боковые направляющие (неподвижные направляющие 4 шт., Т-образные направляющие 4 шт., тележки 4 шт., дорожки 4 шт.; система управления механизмом трансформации (шкаф питания с панелью управления 2 шт., мобильный пульт управления 2 шт., с возможность подключения к панели управления).
Подъёмная платформа перемещаться (вверх/вниз) с помощью подъёмных механизмов, использующий технологию жёсткой толкающей цепи для вертикального перемещения тяжёлых грузов. Подъёмный механизм обеспечивают вертикальное перемещение и подъем. Затем движение происходит приводными валами, которые перемещают внутренние механизмы. Подъёмные механизмы соединены между собой валами, приводимыми в движение угловой трансмиссией, расположенной на оси металлоконструкции, которая будет получать движение от механической трансмиссии, состоящей из валов и карданных шарниров, приводимых в движение 2 двигателями.
Система сменных кресел позволяет изменять конфигурацию платформы от положения кресла для сидения зрителей к размещению кресел в специальных отсеках под полом платформы. Управление системой трансформации осуществляется с электрических щитов с панелью управления или с мообильных пультов управления. Основные технические параметры системы трансформации: площадь поверхности платформы 80м²; вес мобильной платформы 22 000 кг; вес основной рамы платформы (включая приводы, двигатели) 6 000 кг, статистическая нагрузка 500 кг/ м²; время трансформации не более 10 минут; максимальная скорость 0,05 м/с; общая мощность 32 кВт.
Поставляется в разобранном виде.
GRI 1, 2(a) and 6
Ленточный реверсивный конвейер С2 (далее - Конвейер) модель тип поверхностного исполнения предназначен для транспортировки сырого кокса.
Full descriptionCollapse description
Транспортировка кокса осуществляется при помощи ленты из резинотканевого ленточного полотна. Движение ленты Конвейера осуществляется в непрерывном режиме без остановки для загрузки/выгрузки сырого кокса. Во время работы возможно переключение направления движения ленты Конвейера. В состав Конвейера входят следующие основные компоненты: загрузочная станция, линейный став конвейера, разгрузочный узел, приводная станция, лента конвейера (28 м), электрооборудование (комплект кабелей, полевые устройства (датчик схода ленты 4 шт., кнопка аварийного выключения 2 шт. индуктивный датчик скорости, радарный датчик уровня 2 шт.), распределительный шкаф).
Принцип работы: Кокс попадает на конвейер через загрузочное отверстие загрузочной станции и перемещается по линейному ставу конвейера до одного из разгрузочных барабанов, в зависимости от выбранного оператором направления движения, после чего сбрасывается с ленты в соответствующий отсек для хранения.
GRI 1 and 6
The wagon roller with wheel grippers (hereinafter - the tipper) is designed for unloading loose materials from gondola cars, by their rigid fixation and rollover.
Full descriptionCollapse description
The tipper is a rotary cylindrical structure, hereinafter referred to as a rotary frame, on which a loaded railway gondola is placed. After placement, the car is clamped using a series of hydraulic clamps. Then the rotary frame of the Thrower is rotated 180 degrees in the longitudinal direction, while the bulk cargo is poured out of the car into the receiving bunker under the Thrower (not included in the delivery kit). The rotating frame is mounted on supporting rollers that allow it to rotate. Rotation is carried out by the drive unit of the Overturner, which is engaged with the end ring from the drive unit.
The main components of the Overturner are as follows: turning frame, maintenance site, support of the suspension cable, control plates, sleeves with buffers, protective plate, drive unit, hydraulic system of the tipper and wheel gripper, lubricating device for the roller, wheel grip (includes: double capture unit 2 pcs, overhead plates 2 compl., hydraulic system for wheel grip at the outlet, complete lubricating device for wheel grippers, electrical equipment (consisting of: Main operator remote for visualization of processes, distribution cabinets and control cabinets 1 compl., electric heating device, cable products 1 compl.), field devices (sensors, switches, solar cells, sound/light-signalling devices, cable trays 1 compl., Fixing elements in the amount necessary for assembly.
GRI 1 and 6
Portal reklimer is a scraper unloader moving along the rails along the warehouse, designed to disband the stack of bulk materials.
Full descriptionCollapse description
The equipment consists of the following main components: the main portal design; the reclimer movement unit (side trolleys with running wheels); the movement unit (lift) of arrows; the auxiliary (bucket) arrow assembly; the main (rawling) boom assembly; the unloading unit (with a motorized rotary crusher of oversized crushers for grinding lumps of sintered pellets); lubrication systems. It comes complete with bridges and stairs necessary for maintenance, as well as materials for assembly and first start.
Principle of operation: the reclimer moves along the rails along the warehouse by means of running trolleys; the arrows are raised and lowered through the lifting node to ensure contact of the scrapers with the surface of the dump; the motorized chain of the auxiliary boom provides movement of the scraper blades along the scraper blades, which push the material towards the main arrow; the motorized chain of the main arrow blades that draws the material into the unloading node, where it moves when it falls on the damper surface, then the rotor crusher, from where it moves through the control system of the process and the receptor control of the receptor into the secondary control system for the receptor, the receptor for the receptor control of the receptor, the receptor for the transfer of the receptor in the supply chain, begins to the receptor control of the receptor's control system for the receptor, and the receptacle control of the secondary control of the vehicle for the management system is provided separately.
The planned installation site is the building of a bulk storage of granular urea; the transported material is urea. Maximum performance of the reklimer is 400 t / h.
GRI 1, 2(a) and 6
The ECL process crane anode capture device (hereinafter referred to as the Device) is designed to capture a packet of anodes, transport them, load them, unload them in a firing furnace, as well as install anode packets on the conveyor.
Full descriptionCollapse description
All of the above operations are carried out by capturing, fixing and lifting packets of anodes in order to ensure their transportation. The device is installed on the frame of the trolley of the technological bridge crane. The device consists of the following components: lifting device, vertical carriage, capturing anodes. The lifting device is designed to move the vertical carriage of the suspension column using a drum with an integrated geared motor and serves to ensure the movement of the anode gripper up / down.
The vertical carriage consists of a fixed guiding column, a vertical carriage and a suspension column. A fixed column is attached to the frame of the bridge crane trolley. On a fixed column hinged (moving) fixed vertical carriage, which moves along the column on rollers. A suspended column is attached to the vertical carriage, designed to fasten the capture of the anode. Anode capture is designed to hold a packet of anodes of their three anode blocks. The retention of anodes is carried out at the expense of their own weight using levers, lever and locking mechanisms.
The capture case is attached to a suspended column. The maximum load capacity of the anode capture device for packets is 3.5 tons. The maximum load capacity of the lifting device is 7 tons.
GRI 1 and 6
Module of continuous supply and movement of colored powder pigments used in the technological process of production of paints.
Full descriptionCollapse description
The module is a single technological complex and includes the following main components: unpacking station of small packages (6 units); vacuum feeder (6 units); vacuum pump (3 units); pneumatic transporter (6 units); dust collector (6 units); mobile capacity of 1000 liters (6 units); metal platform for installation and maintenance of equipment (1 units); control system (1 units).
Principle of operation: colored powder pigments in packages are served at the unpacking station, where they are unpacked and put into the bunker on a vibration sieve, which ensures sieving, cleaning and staining of the product. The powder on the pneumatic transporter, due to the supply of air created by the vacuum pump and the negative pressure created by the vacuum generator, moves to the dust collector, where the dust part is separated from the powder. When the bunker of the dust collector is completely filled with material, the controller automatically cuts off the air source, the vacuum generator stops working, the shutter of the loading window opens and the powder is poured into the mobile container, to move the powder material for further manufacturing process of paint.
Management and control of the equipment is carried out by a single control system.
Technical characteristics: packaging of raw materials in the unpacking station 2 packets / min. (packages from 10 to 40 kg); pneumatic feed capacity of 3200-6000 kg / h; dust purification input / output 200 g / m3 / 50 mg / m3; compressed air pressure 0.4-0.6 MPa. The module is supplied in a partially disassembled form.
GRI 1, 2(a) and 6
Механизм перемещения анодов предназначен для перемещения в вертикальном направлении ошиновки анодной с обожженными анодами алюминиевого электролизера с целью обеспечения требуемого межполюсного расстояния.
Full descriptionCollapse description
В состав оборудования входят следующие основные компоненты: двигатель асинхронный АИРМ132М4 УХЛ2 (1шт), редуктор червячный (2шт), домкраты (12 шт), муфта (2шт), валы (12 шт), заглушка (2шт), полумуфта (24 шт). Механизм перемещения работает следующим образом: электродвигатель двусторонним валом через муфты передает крутящий момент на выходные валы редукторов червячных. Далее через полумуфты и валы с входных валов редукторов червячных передается крутящий момент на входные валы домкратов. Домкраты перемещают вертикально подвесы, на которых закреплена ошиновка.
Движение ошиновки анодной вверх и вниз определяется направлением перемещение вала электродвигателя. Высота подъема/опускания оборудования (вертикальный ход анодной ошиновки) составляет 300 мм, грузоподъемность 170т.
GRI 1, 2(a) and 6
Механизм перемещения анодов предназначен для перемещения в вертикальном направлении ошиновки анодной с обожженными анодами алюминиевого электролизера с целью обеспечения требуемого межполюсного расстояния.
Full descriptionCollapse description
В состав оборудования входят следующие основные компоненты: двигатель асинхронный (1 шт), редуктор червячный (2 шт), домкраты (12 шт), муфта (2 шт), валы (12 шт), заглушка (2 шт), полумуфта (24 шт). Механизм перемещения работает следующим образом: электродвигатель двусторонним валом через муфты передает крутящий момент на выходные валы редукторов червячных. Далее через полумуфты и валы с входных валов редукторов червячных передается крутящий момент на входные валы домкратов. Домкраты перемещают вертикально подвесы, на которых закреплена ошиновка.
Движение ошиновки анодной вверх и вниз определяется направлением перемещение вала электродвигателя. Высота подъема/опускания оборудования (вертикальный ход анодной ошиновки) составляет 300 мм, грузоподъемность 170 т. Поставка механизма перемещения анодов осуществляется в разобранном виде.
GRI 1, 2(a) and 6
The robotic sorting system is designed to send parcels ordered over the Internet.
Full descriptionCollapse description
The robotic sorting system consists of the following main modules: sorting equipment (sorting robot – 45 pcs), charging station - 3 pcs; communication equipment (wireless communication module – 3 pcs), switchboard; scanning equipment (PC - 3 pcs), PC camera - 6 pcs, scanner, 6 pcs. frame for the scanner - 3 pcs, control unit - 3 units; 3D shuttle (3D shuttle – 20 units) Control unit for the 3D shuttle - 20 pcs. 3D shuttle rack - 40 pcs, Control server -17.3 - 2 units; server equipment (WES server – 3 pieces, RCS server – 2 pieces), monitor 24 inches - 2 pcs, power cabinet, server cabinet - 2 pieces, Uninterruptible power supply for the server - 2 pcs; platform for robots (sorting table – 51 pcs), sorting table type 2 - 3 pcs, mat with labels - 420 pcs; software.
Principle of operation: operators-layers lay out packaged and barcoded cargo units on robot sorters. After scanning, the information from the barcode is sent to the server of the software and hardware complex (hereinafter - the PAK), where it is processed and through the communication equipment a signal is sent to the required robot sorter about the 3D shuttle to which it is necessary to deliver the cargo unit. The robot sorter moves on a platform made of steel sheet, covered with PVC mats with tags, to a 3D shuttle and shelves with containers (containers are not included in the package).
Each container is assigned a specific address. A robot sorter drops a cargo unit onto a 3D shuttle folding panel. By moving along horizontal and vertical linear guides, the folding panel moves to the address basket and unloads the cargo unit. Robotic sorting system comes with a set of fasteners and installation products in the amount necessary for installation.
GRI 1, 2(a) and 6
Загрузочное устройство предназначено для загрузки кассет с рулонами алюминия в двухкамерную печь отжига, выгрузки из печи и установки в назначенное место.
Full descriptionCollapse description
Основные компоненты: тележка поперечного перемещения (для перемещения загрузочного устройства вдоль фронта печи), на которой смонтирована тележка продольного перемещения (для перемещения стеллажа с рулонами алюминия в рабочее пространство печи и обратно); подъемный механизм (для подъема тележки продольного перемещения); стопорный механизм; гидравлическая система; система управления (контроллер, модули ввода и вывода информации, лампы индикаторные и кнопки).
Принцип действия: загрузочное устройство перемещается вдоль фронта печи от стеллажа-накопителя рулонов до загрузочного окна печи, подает кассеты с рулонами в рабочее пространство печи и устанавливает на специальные направляющие. Управление загрузочным устройством осуществляется с пульта управления, установленного на раме тележки поперечного перемещения, при помощи кнопок и ключей управления. Характеристики загрузочного устройства: максимальная грузоподъемность- 35 т, высота подъема- 90 мм, высота платформы от пола- 1155 мм, колея загрузочной машины-1150 мм.
GRI 1 and 6
Rifle rotary bucket reclimer 44m for coal, (hereinafter - Advertiser) - large-sized mobile machine for loading and unloading of bulk materials, which is specialized equipment (mechanical loader used in conjunction with the conveyor) on the rail, designed for taking coal from the stack and equipped with a belt boom and rotary bucket wheel.
Full descriptionCollapse description
The principle of operation of the Advertiser is to move along the coal heap and extract coal using a rotating bucket rotary wheel located at the end of the arrow, followed by feeding to the boom conveyor. On the boom conveyor, coal enters the bulk bin and then on the main conveyor belt (not included in the supply). The Advertiser consists of the following main components: rotary bucket wheel, arrow conveyor, upper part of the structure, lifting mechanism, rotary mechanism frame, rotary mechanism, portal assembly, movement mechanism, cable rotary device, service winch, operator cabin, lower electric room, upper electric room, cable drum, lubrication system, dust suppression system, embedded parts, limiters, platforms and stairs, bunker, lower platform, protection and detection devices, electrical components.
Advertiser is delivered in a disassembled form.
GRI 1, 2(a) and 6
Rifle rotary bucket recliner 44m for coal, (hereinafter - Advertiser) - large-sized mobile machine for loading and unloading bulk materials, which is specialized equipment (mechanical loader used in conjunction with the conveyor) on the rail, designed for taking coal from the stack and equipped with a belt boom and rotary bucket wheel.
Full descriptionCollapse description
The principle of operation of the Advertiser is to move along the coal heap and extract coal using a rotating bucket rotary wheel located at the end of the arrow, followed by feeding to the boom conveyor. On the boom conveyor, coal enters the bulk bin and then on the main conveyor belt (not included in the supply). The Advertiser consists of the following main components: rotary bucket wheel, arrow conveyor, upper part of the structure, lifting mechanism, rotary mechanism frame, rotary mechanism, portal assembly, movement mechanism, cable rotary device, service winch, operator cabin, lower electric room, upper electric room, cable drum, lubrication system, dust suppression system, embedded parts, limiters, platforms and stairs, bunker, lower platform, protection and detection devices, electrical components.
Advertiser is delivered in a disassembled form.
GRI 1, 2(a) and 6
The plant is a comprehensive equipment for overloading, lifting and transferring cathode zinc to the smelting furnace.
Full descriptionCollapse description
The installation consists of the following main components: an internal chain device for receiving a stack of zinc; a lift, which includes a frame, a winch, a cradle; a chain device of the second floor; an automatic control system; a positioning device in the form of a sensor; a set of mounting materials and fasteners in the amount necessary for the assembly of the installation.
Principle of operation: Forklift (not included in the delivery) loads stacked zinc on the internal chain device, after which the positioning device in the form of a sensor is triggered. Then the stack of zinc with the help of a lift is raised to the second floor and transmitted to the chain device of the second floor, which receives the stack and feeds it to the loading mechanism of the smelting furnace. The inner chain device shall be lowered to its starting position on the first floor to receive the next stack.
GRI 1 and 6
Automated system of transportation and storage of pallets is a complex of various transportation and maintenance modules of cyclic and continuous action, providing automatic processing and storage of cargo units on pallets (hereinafter - GE).
Full descriptionCollapse description
Designed for receiving products from production lines, placing them on standard pallets, transporting them to the storage area or unloading area, storing pallets on front shelving (shelving is not included in the delivery package), unloading stored pallets with cargo to the storage line for further unloading. Structurally, the equipment consists of 4 zones: the GE acceptance zone from production; the zone of the high-speed rail transport system; the GE storage zone and empty pallets; the GE expedition zone. The equipment consists of the following main components: crane with two elongated telescopic pitchforks for the Double-Deep system (9 units); rail transportation trolley (15 pcs); rotating table of the rail system (5 pcs); rail track (320 meters); roller conveyor (34 units); chain conveyor (142 units); roller conveyor with lifting device (3 units); roller rotary table (3 pcs); pallet shifter (20 units); fork pallet lift for setting and extraction of a reversible pallet (Stacker / Destacker)
(8 pcs); dispenser - a device for stacking and issuing revolving pallets (8 pieces); module for checking the weight and size characteristics of pallets (4 units); roller conveyor module with lifting device for unloading pallets by hand trolley; chain conveyor module on the rail track (chain conveyor-shuttle); control and power supply system (control of movement of GE / pallet is carried out in automatic mode).
GRI 1 and 6
The roller stand is designed to support and move the workpiece.
Full descriptionCollapse description
The stand is a prefabricated product comprising a folding bearing tubular frame with legs and a support mechanism with a bracket. The support mechanism consists of a ball-roller node. The ball assembly consists of a body, a load ball and rolling bodies. The roller assembly, in turn, consists of a roller shaft and bearings. The support mechanism is used in one of two positions: the movement of the workpiece is carried out using a ball assembly in any direction or a roller assembly in the longitudinal direction.
Principle of operation: the operator installs a stand, with the help of a retractable pipe and a fixation mechanism sets the necessary height and then fixes a roller assembly or ball assembly for the necessary movement of the workpiece. Main characteristics: weight - 6.9 kg, maximum load-bearing capacity - 100 kg, height from 700 to 1150 mm, used with circular table saws.
GRI 1 and 6
The stender is a sealed pipe system with hinge joints and hydraulic actuators, installed on river/sea berths and is designed for the discharge / pouring of oil and dark oil products between tank parks and tankers.
Full descriptionCollapse description
The stander is permanently installed on the loading platform of the berth and connects cargo, bunkering and ballast pipelines to the tanker, while the discharge of oil products from the tanker is carried out using tanker pumps, and tank park pumps are used for filling the tanker (the equipment is not included). The equipment consists of the following main components: drainer stand-up with a connecting flange, by hydraulic controllers, valves and locking system; support of the inner shoulder with a ladder and a service platform; inner shoulder with cable pantograph, hydraulic drive and counterweight; external hydraulic arm; docking clutch with hydraulic drives and emergency shutdown device;
Hydraulic station (consisting of: pressure sensors, flashing beacon (light alarm), loudspeaker (sound alarm), electric shield hydraulic pump - 2 pcs, hand pump, air dehumidifier reverse hydraulic fluid filter, accumulator, hydraulic fluid level indicator, reservoir of hydraulic fluid, blocks of electrohydraulic valves; electric control panel (consisting of: terminal pads, main switch 4 poles 25A 400B, 400/230 V transformer, power supply 230 V AC/24V DC, programmable controller, buttons selector switches, panel switch, signal lights, fuse block, secondary relay, panel heater); parts and materials, necessary for installation and commissioning.
The equipment is supplied in a partially disassembled form.
GRI 1, 2(a) and 6
The stender is a sealed pipe system with hinge joints and hydraulic actuators, installed on river / sea berths and is designed for draining / pouring light oil products between tank parks and tankers.
Full descriptionCollapse description
The stander is permanently installed on the loading platform of the berth and connects cargo, bunkering and ballast pipelines to the tanker, while the discharge of oil products from the tanker is carried out using tanker pumps, and tank park pumps are used for filling the tanker (the equipment is not included). The equipment consists of the following main components: drainer stand-up with a connecting flange, by hydraulic controllers, valves and locking system; support of the inner shoulder with a ladder and a service platform; inner shoulder with cable pantograph, hydraulic drive and counterweight; external hydraulic arm; docking clutch with hydraulic drives and emergency shutdown device;
Hydraulic station (consisting of: pressure sensors, flashing beacon (light alarm), loudspeaker (sound alarm), electric shield hydraulic pump - 2 pcs, hand pump, air dehumidifier reverse hydraulic fluid filter, accumulator, hydraulic fluid level indicator, reservoir of hydraulic fluid, blocks of electrohydraulic valves; electric control panel (consisting of: terminal pads, main switch 4 poles 25A 400B, 400/230 V transformer, power supply 230 V AC/24V DC, programmable controller, buttons selector switches, panel switch, signal lights, fuse block, secondary relay, panel heater); parts and materials, necessary for installation and commissioning.
The equipment is supplied in a partially disassembled form.
GRI 1, 2(a) and 6
The log sorting line is designed to sort logs depending on their characteristics (length, diameter, type of wood).
Full descriptionCollapse description
Sorting logs is carried out by loading them, piece-by-piece separation, determining characteristics, transportation to certain pockets and unloading (dumping) using pushers. The line comes in disassembled form and includes the following main components: log table (3 pcs), step loading device, evaluation device, chain guide, device for moving logs through a metal detector, metal detector, sorting device, a shelf for dumping "lost" logs (2 pcs), trash-scraper, scraping device for garbage collection, operator's cabin with remote control, technical room for electrical panel and hydraulics center, hydraulic manipulator, electric center support structures, service areas and stairs, Hydraulic center, central lubrication system, fence.
Principle of operation: wood is fed to tables for logs. The hydraulic manipulator adjusts the position of these logs if necessary. Next, the logs are piece by piece separated on a step loader and moved to the evaluation device to determine the presence of an obvious defect. The logs are then passed through a metal detector and then transported to a 3D log measurement system (not included in the delivery). After that, the logs are sent to the sorting device, where, according to the results of the measurement system, they are sorted using pushers into the corresponding 60 pockets.
GRI 1, 2(a) and 6
Загрузочное устройство предназначено для загрузки кассет с рулонами алюминия в печь отжига, выгрузки из печи и установки в назначенное место.
Full descriptionCollapse description
Основные компоненты: тележка поперечного перемещения (для перемещения загрузочного устройства вдоль фронта печи), на которой смонтирована тележка продольного перемещения (для перемещения стеллажа с рулонами алюминия в рабочее пространство печи и обратно); подъемный механизм (для подъема тележки продольного перемещения); стопорный механизм; гидравлическая система; система управления (контроллер, модули ввода и вывода информации, лампы индикаторные и кнопки).
Принцип действия: загрузочное устройство перемещается вдоль фронта печи от стеллажа-накопителя рулонов до загрузочного окна печи, подает кассеты с рулонами в рабочее пространство печи и устанавливает на специальные направляющие. Управление загрузочным устройством осуществляется с пульта управления, установленного на раме тележки поперечного перемещения, при помощи кнопок и ключей управления. Характеристики загрузочного устройства: максимальная грузоподъемность- 45 т, высота подъема- 90 мм, высота платформы от пола- 1155 мм, колея загрузочной машины-1150 мм.
GRI 1 and 6
Оборудование представляет собой шести-осевой манипулятор с гидравлическим приводом, предназначенный для механической установки и извлечения элементов внутренней футеровки рудоразмольных мельниц на предприятиях горнодобывающей и горно-обогатительной промышленности.
Full descriptionCollapse description
Оснащен самоходной функцией для перемещения к месту проведения работ, функциями подъёма и перемещения футеровки. В состав оборудования входят следующие основные компоненты: кузов на 4-х колесах с гидравлическим приводом (рабочая платформа /несущий корпус манипулятора); плечо (для соединения кузова с предплечьем и регулировки рабочего положения предплечья) с тележкой для перевозки футеровки; предплечье (для перемещения футеровки к месту установки); запястье (осуществляет зажим и захват футеровки); гидравлическая система; портативный пульт дистанционного управления; подвесной канат для подъема футеровки (цепной такелаж в виде двух цепных строп с крюками); поставляется в комплекте с инструментами и принадлежностями для монтажа и пуско-наладки.
В процессе работы манипулятор осуществляет захват, зажим и рывок для снятия элементов старой футеровки мельницы и захват с зажимом новой футеровки для ее точной установки в требуемое положение: корпус кузова располагается снаружи мельницы и крепится к фундаменту анкерами; при снятии изношенной футеровки используется подъёмный крюк со стропами на переднем конце манипулятора; из шести осей предплечье имеет 3 степени свободы (подъемная, телескопическая и вращательная) и захват имеет 3 степени свободы (горизонтальная качка, разворот в вертикальном положении и тангаж); управление движением платформой осуществляется оператором с дистанционного пульта или гидравлическими рукоятками на кузове, с электрического шкафа управления и панели управления (операционный пульт); контроль и управление процессом захвата осуществляется оператором посредством пульта управления (рукоятка управления на предплечье).
Технические характеристики: грузоподъемность манипулятора 1500 кг, длина хода пллеча 3100 мм, давление 21 Мпа, мощность 40 кВт, скорость движения кузова около 0,4 м/с, проворот предплечья ± 360°, горизонтальный угол проворота запястья (качка) ± 75°, вращательный угол проворота запястья (качка) ± 45°, тангаж запястья +25/-125°, диапазон раскрытия захвата 430-610 мм, грузоподъемность цепного такелажа 3,5 т.
GRI 1, 2(a) and 6
The system is designed to lift and move patients recovering from stroke, amputations, musculoskeletal injuries, brain and spinal cord injuries along the route determined by the installation execution: inside the wards, inside the reception departments of medical and preventive institutions, inside apartments (at home).
Full descriptionCollapse description
The system is disassembled and consists of the following main elements: lifting unit with electric carriage, remote control, automatic coil with electric cable, strutting 650 mm rail ceiling straight (profile 75 mm) 1000 mm - 3 pcs, breaker, stub - 2 pcs, the ceiling rail, adjustable from 100 mm to 2000 mm, system of support of the body (belt supporting, performance options: S, M, L, fasteners (monolith 1 mortgage) in the composition of: scoring anchor - 4 pcs, 5 bolts. 7 pucks. Grover puck - 5 pcs. 2 nuts, operating manual, passport.
Principle of operation: ceiling rails are attached to the ceiling. A lifting block with an electric carriage is installed on the rails. A strut is attached to the lifting block. The patient's body is fixed using the support of the body (the support belt). In this case, the belts (slings) of the support of the body (belt support) are put on the appropriate hooks of the strut. Further, on command from the control panel, the lifting unit by means of an electric drive lifts and moves the strut with the fixed patient to the desired distance.
After carrying out the necessary procedures, the lifting block with the patient fixed on the strut on command from the control panel moves back. Control is carried out by means of continuous influence on the control buttons of the control panel. The system works with a maximum patient weight of no more than 275 kg. The lifting unit with an electric carriage operates from the AC power supply network with a voltage of 230 ± 23 V, a frequency of 50 Hz. Power is supplied by means of an automatic coil with an electric cable.
An automatic coil with an electric cable provides a mechanism for winding the connecting cable. The power consumption of the system is not more than 2460 VA (with a maximum load of 80 kg).
GRI 1, 2(a) and 6
Рельсовая шаржир-машина предназначена перемещения, загрузки/выгрузки заготовок из камерных электрических печей и печей охлаждения в технологическом процессе термообработки заготовок.
Full descriptionCollapse description
Перемещение машины с заготовками осуществляется по сконструированному для данного типа машины рельсовому пути, который обеспечивает большую грузоподъёмность и точность хода. Шаржир-машина состоит из следующих основных компонентов: стальная опорная рама с усиленными колесами, на которой расположена передвижная платформа с поворотной кареткой для кругового перемещения установленных на ней кабины оператора, распределительного шкафа, силовой гидравлической установки, транспортировочных вил; направляющие для перемещения платформы; кабельный барабан с гибким кабелем для передачи электроэнергии.
Платформа передвигается горизонтально по направляющим, расположенным поперечно по отношению продольному передвижению шаржир-машины. Поворотная каретка обеспечивает возможность кругового перемещения установленных на ней частей конструкции на 270 градусов. В качестве навесного оборудования используются транспортировочные вилы, состоящие из четырех вилочных зубьев. Шаржир-машина передвигается по рельсовому пути с помощью с помощью приводного зубчато-реечного механизма, расположенного на одной из концевых балок опорной рамы и зубчатых колес.
Рельсовый путь представляет собой сборную стальную конструкцию и состоит из следующих компонентов: подрельсовое основание; рельсы; зубчатые рейки; крепежные элементы.
Технические характеристики: вес шаржир-машины машины - 20000 кг, длина рельсовыго пути - 85 м, масса рельсового пути около 30000 кг.
Габаритные размеры машины с учетом кабельного барабана (ДхШхВ) - 7535х 7250 х 3400 мм. Машина поставляется в частично разобранном виде, рельсовый путь – в разобранном виде.
GRI 1, 2(a) and 6
Интеллектуальная система перемещения, сортировки, хранения заготовок стекла (далее –интеллектуальная система) предназначена для автоматического перемещения заготовок стекла между обрабатывающим оборудованием (не входит в состав товара).
Full descriptionCollapse description
Основные компоненты: конвейеры 29 шт. (в том числе: загрузочный стол с перемещением, транспортировочные столы, наклоняемые столы, подъемный стол, горизонтальный сортировочный буфер), система управления конвейерами (в том числе: пульты управления, шкафы управления, сканеры QR кодов (оптические), персональный компьютер). Основные действия интеллектуальной системы в технологическом процессе обработки стекла: подача листов стекла со складов хранения на столы резки; последующая передача заготовок стекла на механическую обработку; передача заготовок в печи закаливания или на покрасочную линию.
Контроль за перемещением заготовок стекла осуществляется по идентификационному коду (QR или Bar код), нанесенному на заготовку стекла на столе резки. Транспортируется в разобранном виде.
GRI 1, 2(a) and 6
Rail hydraulic forging manipulator is designed for clamping, holding and performing motor operations with forgings in the forging process on the forging press (the supply is not included).
Full descriptionCollapse description
The manipulator consists of the following main elements: forceps holder, main frame, lifting system, rail frame, traction chain, measuring device, information plates (names), hydraulic system, electrical control system, technical documentation, hand tools and materials for assembly and commissioning.
The main technical characteristics: carrying capacity - 300 kN, the moment of clamping - 600 kNm, parallel lifting of the tick beam - 900-2700 mm, overall dimensions - 11725x4978x4500 mm. The equipment is supplied in a partially disassembled form for ease of transportation.
GRI 1, 2(a) and 6
The lifting rotary table is designed to perform motor operations (lift and turn 360°) with forgings in the technological process of forging blanks on the forging press (it is not included in the delivery).
Full descriptionCollapse description
The table consists of the following main components: base assembly, lifting device, transition plate, loading table, disc spring - 2 pcs., hydraulic cylinder - 2 pcs., reference rotary ring, hydraulic transmission, measuring device, technical documentation and mounting materials for equipment assembly.
Technical characteristics: load capacity - 300 kN, table diameter - 1600 mm, lift speed - 250 mm / s, table speed - 1-3 rpm. The equipment is supplied in a partially disassembled form for ease of transportation.
GRI 1, 2(a) and 6
The system for lifting and moving patients is a rail system designed to move patients along the route determined by the installation execution: inside the wards, inside the apartments (at home), in the reception departments of medical and preventive institutions, from room to room through the doorway.
Full descriptionCollapse description
The system is mounted on the ceiling or to the walls, and in general consists of a lifting unit, a control panel, a charger device, a device for indicating weight, a set of rails and ceiling and / or wall mounts, a patient body support system, a fastening kit. The system is equipped with a body support system, with which the patient's body is fixed and smoothly moves along modular rails with electric power. The lifting unit rotates 360 degrees around the axis of attachment to the rails, maintains magnetic contact with the parking charging station through magnets.
The principle of operation: the body of the lying (or sitting in a wheelchair, chair) patient is fixed using the body support system. The lifting block along the rail track moves to the position above the patient. The loops of the support system are dressed on the appropriate strut hooks, the patient is lifted and moved to the desired distance. After carrying out the necessary procedures, the patient is moved back, the body support system is removed, the lifting unit is moved to the parking place. If necessary, the lifting unit is placed on charging (for this, the charger is connected to the control panel).
Control (lifting and lowering the lifting unit) is carried out from the control panel, using continuous influence on the control buttons of the remote. The system has the function of emergency stop of movement of the lifting unit, has the function of manual emergency descent in case of loss of power supply. The unit operates from a battery built into the lift unit, with a capacity of 13.5Ah/324 Watt*h. The system works with a maximum patient weight of no more than 275 kg. Delivery of the kit is carried out in corrugated cardboard boxes, pasted with tape.
For ease of transportation is supplied in disassembled form.
GRI 1, 2(a) and 6
The automated warehouse complex with pallet shuttles is designed for automated movement and storage of goods with the possibility of their selection and sorting in the warehouse.
Full descriptionCollapse description
It is an automated shuttle system for moving goods inside a rack metal structure using an electronic control system.
Principle of operation: loading, unloading, selection and sorting of goods takes place at 11 stations of selection / sorting, where, through pallet shuttles and elevators on the metal structures of the rack system, goods are transported for manual selection / sorting by a person from storage containers and taken away for placement on the racks of an automated warehouse complex. Navigation of pallet shuttles on the warehouse complex is carried out by reading QR codes during movement and performing logistics operations (loading, unloading, selection and sorting).
The automated warehouse complex includes the following systems and equipment: Shuttle system (pallet shuttle – 8 pcs), charging station for pallet shuttles - 4 pcs, elevator – 2 pcs, QR code on the supporting plate – 1050 pcs; rack system (racks - 660 pallets, steel replacement pallet - 660 pcs, service flooring - 140 m2, Service ladder - 1 pc.; selection / sorting station (guiding pallets - 11 pcs), stop limiter (transport breaker) - 11 pcs, device for checking the dimensions - 11 pcs, code reader - 11 pcs, PLC cabinet complete with cable and cable channel - 12 pcs., operator platform – 14 pcs, LCD screen – 11 pcs, data collection terminal – 11 units; software and hardware complex (computer (APM) - 1 pcs., Shuttle Controller - 1 pc., server - 2 pcs, server cabinet - 1 piece, switchboard - 2 pcs, WiFi access point - 5 pcs, Power distribution cabinet - 1 pc., uninterruptible power supply - 1 pcs., Shuttle control software - 1 pcs., network equipment Ethernet cable cat 6e and connectors 1 set.
Supplied in disassembled form.
GRI 1, 2(a) and 6
The rollover system of wagons is designed for unloading bulk materials (coal) from railway wagons placed in a rollover by turning around its axis by 160 °-170 ° and further transportation by a plate feeder (conveyor).
Full descriptionCollapse description
The equipment consists of the following main components: rotary car roller for 3 cars with hydraulic power plants, rotors with nodes of rotation, with a clamping device, drive system, magnetic system of trappers; wheel clamps for holding wagons in a given place (3 sets); a reverse stop to prevent empty wagons from moving back to the tipper; Reception bunkers with bars, equipped with a wall heating system and vibromotors, to prevent material from sticking to the walls of the bunker (2 sets); plate feeders for moving material from the bunker to the belt conveyor (2 sets); positioner, consisting of a self-propelled machine with a side lever for capturing the coupling device and rail tracks for delivering loaded cars to a given place; wagon pusher, consisting of a self-propelled machine with a side lever for grabbing the coupling device and rail tracks for receiving three laden wagons into the overturner, placing them in a given place and pushing empty wagons out of the overturner;
Dry fog irrigation system to reduce dust formed when loose materials fall from the car into the bunker; electric panels for power supply of all equipment of the wagon unloading line; control cabin (operator) to control the rollover system of cars; auxiliary systems and devices (hydraulic power plants); hydraulic cylinders; block modules; service areas, fences and stairs; automated workstations, servers, controllers; systems: ventilation, filtering, air conditioning, heating, lighting, Fire alarms, fire extinguishing, connections video surveillance, weighing of wagons; sensors, alarms; power cabinets and control cabinets; communications: cables, trays, pipes, Hoses.
Principle of operation: with the help of a positioner, the cars are fed to a position in front of the roller, then the pusher moves three cars into a rotary overturner, which is a rotary cylindrical structure installed on roller support devices that ensure its rotation due to the drive device of the overturner. To prevent the movement of wagons during rollover, hydraulic clamps fix the wagons inside the rollover, ensuring their reliable fixation and contact with the rollover. With the help of a rollover, the wagons are rotated around their axis by 160 °-170 °, as a result of which, the bulk material in the wagons is poured through the grilles into the bunkers located at the bottom of the rollover.
Wagons are fixed in the inverted position to ensure full unloading of the material, after which the wagons are reversed to their original position. The material unloaded from the cars from the bunkers falls on the plate feeder (conveyor), which moves the material to the conveyor belts (not included in the delivery kit) for further transportation. Control of the parameters of the technological process of the station of unloading of wagons is carried out automatically. The wagon rollover system is supplied in disassembled form.
GRI 1, 2(a) and 6
The equipment provides automated in-warehouse movement, delivery, placement, extraction and delivery of palletized goods.
Full descriptionCollapse description
It is an automated shuttle system for moving goods inside a rack metal structure using an electronic control system. The equipment is delivered in disassembled form and consists of the following main components: shelving system (a system of shelving for a four-sided shuttle - 4 levels, 104 storage places, including a ladder for maintenance); decking for maintenance ~ 146 m2; ground fencing - 15.3 m2, with a protective door, with a safety lock; elevator - 2 pcs.; four-sided pallet shuttles - 4 pcs.; charging station - 5 pcs.
(4 stationary sets, 1 mobile emergency kit); wireless operating terminal (tablet); wireless access point; auxiliary tools; transportation system (two-row chain conveyor length 2900 mm - 2 pcs., double-row chain conveyor length of 1500 mm; bracket for LED display; bracket for barcode scanner; steel platform; management system and software (software for the intelligent logistics equipment management system WCS, Intelligent logistic API system and ECS system, main control cabinet, main controller (PLC), field I/O modules, switches/network components, inverter terminal and supplies for field operation, low-voltage electrical equipment (upper level control device, circuit breaker, single-pole switch sensor and connector (photoelectric contactless track door switch), trays and support materials, Barcode scanner, switchboard cabinets, network cables, fiber optic cables, crystal heads, brackets, number of sockets, necessary to put the equipment into operation.
The principle of operation of the equipment is as follows: the pallet is placed on the conveyor line, where the procedure of identification and control of dimensions passes, after which it is transported to the elevator to move to a given level of storage. At the appropriate level, the shuttle takes the pallet and places it in a designated cell of the rack system. The pallet is issued in reverse order: the shuttle removes it from the cell, transfers it to the elevator, then the pallet is transported to the lower level and along the conveyor line is sent to the pallet fence zone.
The executive element of the equipment are robotic four-sided pallet shuttles - autonomous self-propelled devices capable of moving through the rack system in four directions, which allows them to serve cargo storage sites and move between them. The shuttles are equipped with a lifting mechanism for capturing pallets, an accurate positioning system, as well as batteries that ensure autonomous operation with subsequent automatic recharging. Shuttles are controlled wirelessly (Wi-Fi) through a centralized control system.
All elements of the system are managed using a software and hardware complex, including WCS (Warehouse Control System) and ECS (Equipment Control System), as well as API interfaces for integration with external customer information systems without direct participation of personnel.
GRI 1, 2(a) and 6
The equipment is designed to move bridge process cranes from one electrolysis body to another and back, to the repair shop of lifting machines and back, as well as a bridge cathode crane with a suspended load in the form of a cathode or anode devices from electrolysis housings to the capital repair shop of electrolyzers and the breakout site and back with repaired cathode or anode devices.
Full descriptionCollapse description
The equipment consists of the following main components: 1. Transboarder (beam and rails - 2 pcs., flexible support - 2 pcs., rigid support - 2 pcs., lower transverse beam and running mechanism - 4 pcs., staircase with protective fencing 1 - 2 pcs., staircase with protective fencing 2 - 2 pcs., railing - 2 pcs., flipping transboard stop - 2 pcs., current collector and service platform - 2 pcs.); 2 pcs. The locking and alignment device is 4 pcs. (Worm Rail - 4 pcs., the rod fixing - 4 pcs., the rod position sensor - 8 pcs.); 3.
Folding stop - 6 sets (base - 6 pcs., support bracket - 6 pcs., rotary boom - 6 pcs., electric pusher - 6 pcs.); 4. Transboarder troll lines; 5. Operation and control system (control box - 2 units, brake resistor - 2 pcs, distribution box of incoming power supply - 2 pcs., lighting (lighting under the beam) - 4 pcs., sound alarm system - 4 pcs, light alarm system - 11 pcs, end switch - 29 pcs, remote control, cabinet air conditioning - 2 pcs, transformer - 6 pcs, wireless bridge - 2 pcs, button control panel - 2 pcs, sensor laser collision prevention system - 2 pcs, laser distance sensor, absolute encoder - 2 pcs; 6.
Electrical control system of the folding stop of the shop (control cabinet - 2 pieces, terminal box - 6 pieces, end switch - 12 pieces); cables, materials for installation in the amount necessary for putting the equipment into operation.
Principle of operation: if it is necessary to move the bridge crane between workshops, the beams and rails of the lifting device (not included in the delivery) are raised to the upper position, thereby creating space for the passage or stop of the transboard. The transboarder performs a drive into the workshop and fixation with crane tracks located on the walls of the workshop. The crane (not included in the delivery) performs a ride on the transboard. A transboard with a crane moves to a neighboring workshop along the transboard corridor and performs fixation with the crane paths of the neighboring workshop.
Then the crane is moved to the crane paths of the neighboring workshop. The main technical parameters: maximum load capacity of 460 tons, span of 10 m, power of 50 kW.
GRI 1, 2(a) and 6
The lifting device (including folding stops) performs the function of a part of the rail path of the electrolysis body and lifting the beam with rails to the upper position when the transboarder (not included in the delivery) performs operations to move the process crane to the adjacent electrolysis body, to the maintenance and repair site, a cathode crane with cargo to the area of overhaul of electrolyzers.
Full descriptionCollapse description
The lifting device is installed at the intersection of the transboard corridor and the electrolysis housing. One set of lifting device includes the following components: 1. Lifting device (beam and rails - 2 pcs, pedestrian platform - 2 pcs, Pedestrian platform railing - 2 pcs, electric lift - 2 pcs, guiding column - 4 pcs, guide device - 4 pcs, lift rope - 4 pcs, counterweight cable - 4 pcs, cable bracket, counterweight: 4 pcs. upper locking device - 4 pcs, lifting unit - 4 pcs, connecting device of the guiding column - 4 pcs; 2.
Device of locking and alignment (electric motor with worm drive - 4 pcs., worm rack - 4 pcs., rod fixing - 4 pcs., the rod position sensor - 8 pcs.); 3. Folding stop (base - 4 pcs., bracket - 4 pcs., rotary lever - 4 pcs., electric pusher - 4 pcs.); 4. Operation and control system (control cabinet, terminal box - 8 pcs, electric siren alarm - 2 pcs, end switch - 46 pcs); 5. Components for electrical installation (cable tips, wire cable trays, cable screed, hoses, insulating rubber sheet, rubber cement) in the amount necessary for putting the equipment into operation.
The device comes in disassembled form.
Principle of operation: if it is necessary to move the crane between workshops, the beams and rails of the lifting device by means of electric lifts are raised to the upper position using guide devices located on the guide columns, thereby creating space for the passage or stop of the transboard. The main technical parameters: the maximum permissible loading weight is 203 tons, the length of the lifting beam is 14140 mm, the lift speed is ~ 6.3 m / min, the power of the lifting engine ≥ 5.5 kW, the overall dimensions for one set of lifting device (DhShV): 34,824h16,174h16,423 m.
GRI 1, 2(a) and 6
The machine, which is a complex of equipment, is designed to obtain a finished package with banks (bottles), its correct grouping and stacking on empty wooden pallets in several rows according to a given scheme.
Full descriptionCollapse description
The main components of the palletizer: an inlet (feeding) conveyor, consisting of two three-section paths with polymer tapes, equipped with six servo motors; a robotic package distribution system, which is formed by a three-section belt conveyor equipped with three engines and two robot-layer with grippers of the manipulator type; a palletizer lift consisting of movable nodes and mechanisms driven by seven servo drives (sliding table, pushers for moving devices, a lifting platform, a special slat); a supply table (conductors and subconductors are included in the distribution roles of electric conductors);
The principle of operation of the palletizer is as follows: before the input conveyor, the palletizer packages are divided into two lines. In the area of the robotic package distribution system, two robots lay packages according to a given scheme and form a package layer, which is then installed on a wooden palletizer under the influence of functional nodes and mechanisms of the palletizer lift, which is then fed to the drain device (the palletizer is not included in the palletizer delivery kit). The goods are delivered at a time in a partially disassembled form.
GRI 1, 2(a) and 6
Device for capturing anodes of the process crane ECL, brand (hereinafter - the Device) is intended for capturing a package of anodes, their transportation, loading, unloading in the firing furnace, as well as installing packages of anodes on the conveyor.
Full descriptionCollapse description
All of the above operations are carried out by capturing, fixing and lifting packets of anodes in order to ensure their transportation. The device is installed on the frame of the trolley of the technological bridge crane. The device consists of the following components: lifting device, vertical carriage, capturing anodes. The lifting device is designed to move the vertical carriage of the suspension column using a drum with an integrated geared motor and serves to ensure the movement of the anode gripper up / down.
The vertical carriage consists of a fixed guiding column, a vertical carriage and a suspension column. A fixed column is attached to the frame of the bridge crane trolley. On a fixed column hinged (moving) fixed vertical carriage, which moves along the column on rollers. A suspended column is attached to the vertical carriage, designed to fasten the capture of the anode. Anode capture is designed to hold a packet of anodes of their three anode blocks. The retention of anodes is carried out at the expense of their own weight using levers, lever and locking mechanisms.
The capture case is attached to a suspended column. The maximum load capacity of the anode capture device for packets is 3.5 tons. The maximum load capacity of the lifting device is 7 tons.
GRI 1 and 6
What import requires
Russian bans and restrictions
May applyWhether a measure applies to your goods is determined by the provisos in the “code” column. Measures are taken from the register as of the date the act was published; the act is named on every line
- 8428 10 200 9 8428 10 800 0 8428 31 000 0 8428 39 900 1 8428 60 000 0 8428 70 000 1 8428 90 710 0 8428 90 780 0 8428 90 800 0Out of RussiaProhibited
Отдельные виды товаров — временный запрет на вывоз
Машины и устройства для подъема, перемещения, погрузки или разгрузки (например, лифты, конвейеры, канатные дороги) прочие
Постановление Правительства РФ от 09.03.2022 № 311 — until Dec 31, 2027
- 8428 10 200 9 8428 10 800 0 8428 31 000 0 8428 39 900 1 8428 60 000 0 8428 70 000 1 8428 90 800 0Out of RussiaPermit required
Промышленная продукция
Машины и устройства для подъема, перемещения, погрузки или разгрузки (например, лифты, конвейеры, канатные дороги) прочие
Постановление Правительства РФ от 09.03.2022 № 312 — until Dec 31, 2027
Veterinary and sanitary control
Goods fall under supervision by their type and characteristics
Sanitary and epidemiological supervision (control)
rule for the whole chapter 84Материалы, оборудование, вещества, устройства, применяемые в сфере хозяйственно-питьевого водоснабжения и при очистке сточных вод, в плавательных бассейнах; Продукция машиностроения и приборостроения производственного, медицинского и бытового назначения, кроме запасных частей к транспортным средствам и бытовой технике (за исключением контактирующих с питьевой водой и пищевыми продуктами); Продукция, изделия, являющиеся источником ионизирующего излучения, в том числе генерирующего, а также изделия и продукция (товары), содержащие радиоактивные вещества; Строительное сырье и материалы, в которых гигиеническими нормативами регламентируется содержание радиоактивных веществ, в том числе производственные отходы для повторной переработки и использования в народном хозяйстве, лом черных и цветных металлов (металлолом); Оборудование, материалы для воздухоподготовки, воздухоочистки и фильтрации; Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные мерыРешение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154
Conformity assessment
May applyWhether the goods fall under a regulation depends on their name and characteristics. Check them against the list
- ТР ТС 010/2011Safety of machinery and equipment
- Оборудование гаражное для автотранспортных средств и прицепов — certificate of conformity (part of the heading)
- Оборудование подъемно-транспортное, краны грузоподъемные — certificate of conformity (part of the heading)
- Оборудование нефтепромысловое, буровое геолого-разведочное — declaration of conformity or certificate of conformity (part of the heading)
- Оборудование и машины строительные — declaration of conformity or certificate of conformity (part of the heading)
- Оборудование технологическое для предприятий торговли, общественного питания и пищеблоков: оборудование для механической обработки продуктов питания, в том числе оборудование для плодоовощных баз и фабрик-заготовочных; оборудование тепловое для предприятий общественного питания, пищеблоков, а также плодоовощных баз и фабрик-заготовочных — declaration of conformity or certificate of conformity (part of the heading)
- Машины сельскохозяйственные — certificate of conformity (part of the heading)
- Машины для животноводства, птицеводства и кормопроизводства — certificate of conformity (part of the heading)
- Оборудование технологическое для торфяной промышленности — declaration of conformity or certificate of conformity (part of the heading)
- Оборудование технологическое для мукомольно-крупяной, комбикормовой и элеваторной промышленности — declaration of conformity or certificate of conformity (part of the heading)
- Оборудование для вскрышных и очистных работ и крепления горных выработок: комбайны очистные; комплексы механизированные; крепи механизированные для лав; пневмоинструмент — certificate of conformity (part of the heading)
- Оборудование стволовых подъемов и шахтного транспорта: конвейеры шахтные скребковые; конвейеры шахтные ленточные; лебедки шахтные и горнорудные — certificate of conformity (part of the heading)
- ТР ТС 019/2011Safety of personal protective equipment
- Другие средства защиты и спасения с высоты — certificate of conformity (part of the heading)
- ТР ЕАЭС 043/2017About requirements to means of ensuring fire safety and fire extinguishing
- Устройства канатно-спускные пожарные — certificate of conformity
Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.
How it is done in practice
Valid documents in the EAEU unified register for subheading 8428 90: certificates 1,454, declarations 3,802.
- By technical regulation
- ТР ТС 010/20114,075ТР ТС 020/20112,500ТР ТС 004/2011909ТР ТС 019/2011335ТР ТС 012/2011118
- Schemes
- 1д3,0261с8103с4352д3815д201The letter after the scheme number shows the form: certification or declaration of conformity.
- Most active certification bodies
- ТОО «КАЗЭКСПОАУДИТ»Акмолинский филиал АО «Национальный центр экспертизы и сертификации»ООО Центр сертификации ТАТСЕРТ
- Manufacturers outside the EAEU
- China1,658Germany179Italy145Türkiye145South Korea57France48
Manufacturers of these goods →Check a supplier’s document by its number →
Dual use
Expert review neededGoods fall under control by their technical characteristics, regardless of the code. Supplying without a licence when one is required is a criminal offence
Раздел 5 · ввоз по соображениям национальной безопасности · Категория 5. Оборудование для работы со взрывчатыми веществами и обезвреживания взрывных устройств
- Оборудование для работы со взрывчатыми веществами5.1.1 Роботы и компоненты для них, специально разработанные в соответствии со стандартами безопасности для работ с мощными взрывчатыми веществами во взрывоопасной среде (например, удовлетворяющие ограничениям на параметры электроаппаратуры, предназначенной для работы со взрывчатыми веществами во взрывоопасной среде), а также программное обеспечение для них
Раздел 5 · ввоз по соображениям национальной безопасности · Категория 6. Оборудование, применяемое в ядерных целях
- Радиационно стойкие оборудование и системы6.1.2 Роботы и их компоненты, специально разработанные или оцениваемые как радиационно стойкие, чтобы выдерживать общую дозу радиации более 5 x 10 <4> Гр (по кремнию) без ухудшения рабочих характеристик, а также программное обеспечение для них
Checked: one control list of six: dual-use goods (Russian Government Decree No. 1299 of 19.07.2022). The other five lists (nuclear, nuclear dual-use, missile, chemical, biological) are not checked here.
Tariff preferences
The code is on the EAEU list of preferential goods: for goods originating in a beneficiary country the duty is lower
46 countries
Burkina Faso, Guinea, Eritrea, Congo - Kinshasa, Timor-Leste, Afghanistan, Mauritania, Yemen, Cambodia, Lesotho, Laos, Bangladesh, Nepal, Tanzania, Palestinian Territories, Angola, Benin, Burundi, Haiti, Gambia, Guinea-Bissau, Djibouti, Zambia, Kiribati, Liberia, Madagascar, Malawi, Mali, Mozambique, Niger, Rwanda, Senegal, Myanmar (Burma), Sudan, Sierra Leone, Uganda, Chad, South Sudan, Syria, Solomon Islands, Comoros, Togo, Tuvalu, Ethiopia, Somalia, Central African Republic
The preference requires a document of origin and compliance with the direct consignment rule; customs checks the right to it at declaration.
Payments on import
Duty for this code: 0%. On top of the duty, on import into Russia you pay VAT of 22% (unless the goods are VAT-exempt) of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.
Import VAT in EAEU countries
- Russia22%Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025)
- Kazakhstan16%Tax Code of Kazakhstan, Art. 503(1), from 01.01.2026
- Belarus20%Tax Code of Belarus, Art. 122
- Armenia20%Tax Code of the Republic of Armenia
- Kyrgyzstan12%Tax Code of the Kyrgyz Republic
Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all
May be VAT-exempt
The exemption under list No. 1042 applies if the goods match the description and are registered as a medical device:
- 8428 — Оборудование санитарно-гигиеническое, средства перемещения и перевозки 94 5100 (оборудование дезинфекционное; оборудование стерилизационное; оборудование моечное, оборудование для санитарной обработки; оборудование для очистки и обогащения воздуха; средства перемещения и перевозки медицинские (носилки, тележки и другие)
- 8428 — Автомобили с ручным управлением и оборудование к ним (в том числе механизмы для погрузки кресла-коляски, поворотные сиденья, приспособления для закрепления кресла-коляски), устройства для ручного управления (в том числе механические, электрические, пневмогидравлические) и для переоборудования автомобилей)
- 8428 — Специальные средства для самообслуживания и ухода за инвалидами (в том числе подушки и матрацы профилактические, противопролежневые и ортопедические, кровати медицинские с подъемными приспособлениями, фиксаторами, стулья и кресла функциональные, на колесиках, со съемными элементами, поручни, оборудование для подъема и перемещения, специальные приспособления для пользования средствами личной гигиены), специальные средства при нарушениях функции выделения (в том числе уропрезервативы, мочеприемники, мешки для сбора мочи, катетеры, ремни для крепления мешков для сбора мочи, вешалки-крючки для крепления мочеприемников, калоприемники, мешки, пластины и фильтры к калоприемникам, кольца защитные и эластичные полукольца, стержни для стомы, очистители для кожи, нейтрализаторы запаха, анальные тампоны, тампоны для стомы, ирригационные системы и рукава для стомы, пояса крепления калоприемников)
The right code is in the HS code search.