Skip to content
IMEXP.RU
EAEU HS code

8465 91 200 0 — Circular saws for working wood, cork, bone, hard rubber, hard plastics or similar hard materials (excl. machines for working in the hand)

Circular saws for working wood, cork, bone, hard rubber, hard plastics or similar hard materials (excl. machines for working in the hand)

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Duty rate
0%

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit
шт
Item
Requirements and measures
8

None: dual use, EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT
22%

The general import rate in Russia: Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025). This code is not named on the 10% VAT list (Decree No. 908) or the exemption list (No. 1042). The list of medical goods No. 688 is not checked here.

Where it sits in the nomenclature

Section XVI. Machinery and mechanical appliances; electrical equipment; parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles

  1. 84Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
  2. 8465Machine tools, incl. machines for nailing, stapling, glueing or otherwise assembling, for working wood, cork, bone, hard rubber, hard plastics or similar hard materials (excl. machines for working in the hand)
  3. 8465 91Sawing machines for working wood, cork, bone, hard rubber, hard plastics or similar hard materials (excl. machines for working in the hand)
  4. 8465 91 20Circular saws for working wood, cork, bone, hard rubber, hard plastics or similar hard materials (excl. machines for working in the hand)
  5. 8465 91 200 0you are here

Explanatory notes to heading 8465 8 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

8465 Machine-tools (including machines for nailing, stapling, glueing or otherwise assembling) for working wood, cork, bone, hard rubber, hard plastics or similar hard materials: 8465 10 – Machines which can carry out different types of machining operations without tool change between such operations 8465 20 – Machining centres

- Other: 8465 91 - - - mechanical saws 8465 92 - - - planer, milling or planer-wheeling machines 8465 93 - - grinding machines, sand grinding or polishing machines 8465 94 - - flexible or assembly machines 8465 95 - - drilling or bobbing machines 8465 96 - cutting, crushing or shelling machines 8465 99 - other

This heading covers machines for shaping or surface working (including cutting, shaping and assembling) wood (and materials obtained from wood), cork, bone, hardened rubber, hard plastics and similar hard materials (horn, "vegetable ivory" palm wood, mother-of-pearl, ivory, etc.). The heading excludes machines for working materials which, although mentioned in the heading text, do not have the characteristics of hard materials at the moment when their working begins. For this reason, machines for cutting soft plastics or unhardened rubber are excluded (heading 8477). Furthermore, the heading excludes machines for making articles from granules or powder, e.g., machines for moulding plastic materials (heading 8477), machines for agglomerating or moulding particles or fibres of wood or other ligneous material (heading 8479) or other similar machines. Although they may be regarded as machines for working the materials mentioned in the heading text, the heading also excludes machines and appliances the function of which is in general not to work the material or its surface, e.g., machines for drying wood or seasoning it by drying (heading 8419), machines for expanding cork (heading 8419) or machines for pressing, agglomerating or impregnating wood (heading 8479). The machines are generally power-operated, but similar hand- or pedal-operated machines also fall in this heading. The latter can be distinguished from the hand tools of heading 8205 and from the tools for working in the hand of heading 8467 in that they are usually designed for mounting on the floor, a bench, a wall or on another machine, and are therefore provided with a base plate, mounting frame, bed, etc. (A) MACHINES NOT GENERALLY DESIGNED FOR A PARTICULAR INDUSTRY This category includes: (1) Mechanical saws of all types. These work by means of blades or chains, usually provided with teeth. They include: (a) Mechanical saws with a reciprocating tool, e.g., mechanical saws with straight-toothed blades for cross-cutting logs, fret saws, sawing machines with a vertical or horizontal frame for cutting timber into boards. (b) Mechanical saws in which the tool rotates. These include chain saws and band saws, e.g., vertical and horizontal band saws, ripping and edging saws, carriage and table band saws, and also various specialised machines, e.g., multiple band sawing machines for making blocks, strips, friezes, etc., for wooden flooring, and band sawing machines for the paper industry;

(c) mechanical saws in which the tool performs a rotary motion. This large category includes all machines which cut by means of one or more toothed blades moving in a circular motion. It includes, for example, pendulum saws, cut-off saws with straight-line travel of the tool, radial arm saws, block-travel saws for cutting in the longitudinal direction, circular saws for cutting logs, circular cross-cut saws, table saws, sliding table saws, circular saws for cutting panels. (2) Planing-moulding machines and planing machines, which prepare the surface of the workpiece using blades that remove chips from the material. They include machines which work on one or two faces, as well as planing machines which can work up to four faces. (3) Shaping and milling machines, which give the required shape to the workpiece using a profiled rotating tool that removes chips from the material. They include, for example, spindle moulders, single-end tenoning machines, dovetailing machines, slot mortising machines, countersinking machines, milling machines for pattern cutting and for recessing, copying machines (other than lathes), 1-, 2-, 3- or 4-sided moulding machines, profiling machines, rotating-workpiece machines, grooving machines and log milling machines. This category also includes numerically controlled milling machines. (4) Machining centres (see Subheading Note 1 to this Chapter), also known as numerically controlled machining centres. These machines carry out several machining operations and provide automatic tool change from a magazine or other similar device in accordance with a machining programme. This category therefore includes machine-tools which carry out two or more machining operations by automatic tool change from a magazine or other similar device, whereas machine-tools which carry out a single operation with a single tool or with several tools working simultaneously or successively (e.g., multi-spindle drilling machines or multi-tool milling machines) fall in the appropriate subheadings as drilling or milling machines. (5) Grinding, sanding and polishing machines. Grinding machines, which use grinding stones, are used mainly for working articles of hard material, e.g., wood of the "vegetable ivory" palm, hard rubber, horn and ivory. Sanding machines use abrasives to improve the surface finish and also to increase the dimensional accuracy of the work. This category includes oscillating machines, belt sanders using sandpaper, disc sanders using sandpaper, bobbin and drum sanders using sandpaper. This category also includes machines known as finishing machines. Polishing machines impart a lustre by means of belts, drums or flexible rollers and are designed for working workpieces which have previously undergone finishing.

(6) Bending machines, which mechanically change the shape or physical characteristics of the workpiece by acting on its structure. (7) Assembling machines. These include: (a) machines which assemble two or more parts by means of binding agents, adhesives or gummed paper. This category includes veneer splicing machines, assembly machines for gluing strips, panel forming machines, frame clamps, carcass clamps, plywood and laminated wood presses, veneering presses. These machines may also incorporate devices for spreading the adhesive over the surface of the wood; (b) machines which join by means of nails, staples, wire, etc.; (c) machines for joining without binding agents or fasteners, e.g., crimping presses. (8) Drilling machines. They are used exclusively for drilling a round hole by means of a rotating tool (drill or bit). The centre of the tool and that of the hole being drilled lie on a common axis. This category includes single- and multi-spindle drilling machines, knot-boring machines, dowel-hole drilling machines. This category also includes numerically controlled drilling machines. (9) Mortising machines. These machines cut holes of non-cylindrical shape using a chisel, a mortising chain or a bit moved along a set path, e.g., slot mortisers, chisel or chain mortisers. (10) Splitting, punching, chipping, peeling and slicing machines. All these machines work the workpiece mechanically without removing chips from the wood. They include: (a) splitting machines, which break the bond between the fibres by the action of a wedge. They include firewood splitting machines, log splitting machines, root splitting machines, osier, bamboo and rattan splitting machines; (b) punching machines, which obtain the required shape by impact punching, e.g., veneer punching machines; (c) chipping machines, by means of which small pieces of wood of the same size and shape are obtained. They include machines for cutting wood chips, machines for producing small pieces of wood, wood wool machines, as well as firewood splitting and edge trimming machines. However, the heading excludes defibrators for the production of wood pulp (heading 8439); (d) peeling and slicing machines, which use a straight cutting edge to produce thin sheets either by peeling (machines for making thin boards) or by slicing (machines for producing veneers or thin sheets for the manufacture of plywood). This category of equipment also includes veneer peeling machines using straight blades, mitre-cutting machines and core-cutting machines.

(11) Lathes, which are used for shaping the workpiece by rotating it about its own axis, the tool itself not rotating. This category includes lathes of all kinds, including copying lathes. (12) Machines for lopping branches from felled trees or for sawing logs. (13) Barking machines (log decorticators, barking machines for making poles, etc.), other than water-jet barking machines of heading 8424 and barking drums of heading 8479. (14) Knot-boring machines used in working logs (e.g., for use in the preparation of wood pulp). This heading also includes machine-tools which can carry out different types of machining operations without tool change between such operations. Examples are: (1) Combined woodworking machines, combining in one unit several machines performing different functions, used independently of one another. In machines of this type manual handling of the workpiece is required in passing from one operation to another. These machines include surface planing machines combined with devices for performing one or more further operations, and also saw-moulding-mortising machines. (2) Multi-purpose machines in which, unlike the preceding class, no auxiliary manual operation is required once the workpiece has been placed in the machine. These machines include: single-ended tenoning machines with several spindles, double-ended tenoning machines; machines for fitting hardware, for drilling dowel holes, etc.; machines for assembling operations using adhesives and for finishing operations (for producing veneer strips or for making panels from battens). (B) MACHINES SPECIALLY DESIGNED FOR A PARTICULAR INDUSTRY This category of machines includes: (1) Cooperage machines (e.g., stave jointing machines, stave planing machines, stave bending machines, crozing machines for cutting the groove into which the head of the barrel is fitted, or chiming and crozing machines, barrel assembling machines, barrel hooping machines). But the heading excludes appliances for steaming barrels or staves (heading 8419). (2) Machines used in the pencil industry. (3) Machines for mortising or boring railway sleepers. (4) Wood-carving machines, engraving machines, including copying machines. (5) Machines for grinding wood flour. However, the heading excludes defibrators used in the pulp and paper industry (heading 8439). (6) Machines for nailing, stapling, glueing and for otherwise assembling crates, baskets, boxes, barrels, etc. (7) Machines for making wooden buttons.

(8) Machines for making shoes on wooden soles, wooden soles or heels for shoes or boots. (9) Machines for the processing of willow, reed, etc. (peeling, splitting, rounding, etc.), with the exception of machines for the manufacture of baskets or wicker products (heading 8479). This heading covers machines used for processing cork (e.g. sawing, pruning, cutting, polishing), bone, hard rubber, solid plastics and similar solid materials. These machines are constructed according to the same principles as wood processing machines.

PARTS AND ACCESSORIES Subject to the general provisions regarding the classification of parts (see the General Explanatory Note to Section XVI), parts and accessories (other than tools of Chapter 82) of the machines of this heading fall in heading 8466. The heading also excludes: (a) Bamboo crushers, chipping machines for producing wood chips and defibrators used in the manufacture of wood pulp (heading 8439). (b) Machine-tools for working any material by removal of material, by laser or other light or photon beam, ultrasonic or plasma arc processes and other machines of heading 8456. (c) Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor (heading 8467). (d) Machines for cleaning and removing contaminants from the metal leads of semiconductor packages (heading 8486).

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 84 — Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof 24 items

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) millstones, grinding stones or other articles of Chapter 68;

(b) equipment or devices (e.g. pumps) of ceramic materials and ceramic parts of machinery or devices of any material (Chapter 69);

(c) laboratory glassware (heading 7017); equipment, devices or other articles for technical purposes or parts thereof of glass (heading 7019 or 7020);

(d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81);

(e) vacuum cleaners of heading 8508;

(f) electromechanical household appliances of heading 8509; digital cameras of heading 8525;

(g) radiators for articles of Section XVII; or

(h) manual mechanical brushes for floor cleaning, without engine (heading 9603).

2. Subject to the provisions of Note 3 to Section XVI and Note 11 to this Chapter, a machine or device which meets the description in one or more of headings 8401 to 8424 or heading 8486 and at the same time the description in one or more headings 8425 to 8480 is included in the relevant heading of the first series of headings or in heading 8486 as the case may be, and not in the second series.

(A) However, heading 8419 does not cover:

(i) seed germination equipment, incubators or brooders (heading 8436);

(ii) machinery for wetting grains (heading 8437);

(iii) diffusion apparatus for the extraction of sugary juice (heading 8438);

(iv) equipment for the heat treatment of textile yarn, textile materials or finished textile articles (heading 8451); or

machining equipment, assemblies or laboratory equipment in which temperature change, even if necessary, is an auxiliary process.

(B) Heading 8422 does not cover:

(i) sewing machines for sewing bags or similar packagings (heading 8452); or

(ii) office equipment of heading 8472.

(C) Heading 8424 does not cover:

(i) paint-blasting printing presses (heading 8443); or

(ii) water jet cutting machines (heading 8456).

3. A machine for processing any material which corresponds to the description of heading 8456 and simultaneously to the description of heading 8457 to 8461, 8464 or 8465 is classified in heading 8456.

4. Heading 8457 covers only metalworking machines other than lathes (including multipurpose lathes) which may perform different types of machining operations by:

(a) the automatic replacement of tools from a tool store or similar device in accordance with the processing program(s);

(b) the automatic application simultaneously or sequentially of different processing heads operating at a fixed workpiece (assembly single-position machines); or

(c) automatic movement of the workpiece to various processing heads (multi-position machines).

5. For the purposes of heading 8462, the term “longitudinal cutting line” for flat products means a process line consisting of a winder, a correct device, a longitudinal cutting device and a winder. The term “cross-cutting line” for flat products means a process line consisting of a unwinder, a correct device and a cutting device.

6. (A) For the purposes of heading 8471, the term “computers” means machines capable of:

(i) store the processing program or programs and at least the information currently necessary to execute the program;

(ii) be freely reprogrammable according to user requirements;

(iii) perform user-defined arithmetic calculations; and

(iv) perform, without human intervention, a processing program requiring the computer to modify its actions by making logical decisions during processing.

(B) Computing machines can be made in the form of systems consisting of a different number of individual blocks.

(C) Subject to the provisions of Notes (D) and (E) below, a block shall be treated as part of a computing system if it satisfies all of the following conditions:

(i) exclusively or principally used in a computing system;

(ii) is capable of being connected to the central processing unit either directly or through one or more other units; and

(iii) is capable of receiving or presenting information in such form (codes or signals) as may be used by the system.

Separately presented computer units are classified in heading 8471.

However, keyboards, X-Y-coordinate input devices and disk storage units which satisfy the conditions laid down in Notes (B) (ii) and (B) (iii) above are in all cases to be regarded as blocks of heading 8471.

(D) Heading 8471 does not cover the following devices, presented separately, even if they meet all the conditions of Note 6(C) above:

(i) printers, copiers, facsimile machines, combined or not;

(ii) apparatus for receiving or transmitting voice, images or other data, including apparatus for providing communications over a wired or wireless communication network (for example, on a local or wide area network);

(iii) loudspeakers and microphones;

(iv) television cameras, digital cameras and video recording cameras;

(v) monitors and projectors not combined with television reception equipment.

(E) Machines containing or working in conjunction with a computer and performing specific functions other than information processing are classified in the headings according to their specific functions or, if this is not possible, in the residual headings.

7. Heading 8482, inter alia, covers polished steel balls whose maximum and minimum diameter does not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is smaller. Other steel balls are classified in heading 7326.

8. A machine which is used for more than one purpose shall be classified as if its primary purpose were the only one.

Subject to the provisions of Note 2 to this Chapter and Note 3 to Section XVI, a machine whose primary purpose is not described in any heading or a machine in which none of its functions is primary is classified in heading 8479, unless the context otherwise provides. Heading 8479 also includes machinery for the manufacture of ropes or ropes (e.g. knitting machines) from metal wire, textile yarn or other materials or from a combination of such materials.

9. For the purposes of heading 8470, the term “pocket” applies only to devices not exceeding 170 x 100 x 45 mm.

10. For the purposes of heading 8485, the term additive manufacturing (also referred to as 3D printing) means the formation of physical objects based on a digital model by successively adding and layering, sealing and curing a material (e.g., metal, plastics or ceramics).

Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machines as described in heading 8485 are classified in that heading and no other heading of the Nomenclature.

11. (A) Notes 12(a) and 12(b) to Chapter 85 also apply to the terms “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this note and in heading 8486. However, in this note and in heading 8486, the term "semiconductor devices" also applies to photosensitive semiconductor devices and LEDs.

(B) In this note and in heading 8486, the term “plane display panel production” covers the fabrication of a flat panel of substrates. It does not cover the production of glass or the installation of printed circuit boards or other electronic components on flat panels. The term "flat display panel" does not apply to cathode ray tube technology.

(C) Heading 8486 also includes machinery and apparatus used exclusively or principally for:

(i) producing or eliminating defects in masks and patterns;

assemblies of semiconductor devices or electronic integrated circuits;

(iii) lifting, manipulating, loading or unloading boules, plates, semiconductor devices, electronic integrated circuits and flat display panels.

(D) Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machinery meeting the description in heading 8486 is classified in this heading and in no other heading of the Nomenclature.

Subheading notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. For the purposes of subheading 8465 20, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.

2. For the purposes of subheading 8471 49, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).

3. For the purposes of subheading 8481 20, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481.

4. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.

Additional notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheadings 8407 10 and 8409 10, the term “aviation engines” shall apply only to engines intended for assembly with an air or rotor.

2. В подсубпозицию 8471 70 300 0 также включаются устройства считывания компакт-дисков, являющиеся запоминающими устройствами вычислительных машин, которые предназначены для считывания сигналов с CD-ROM, аудиокомпакт-дисков и фотокомпакт-дисков и снабжены разъемом для наушников, регулятором громкости или кнопкой пуск/стоп.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheading 8482 10 900 1, the term “gross mass” means the total mass of the goods with all kinds of packaging materials and packagings ensuring their safety during storage and transport. The total weight of the goods does not include the mass of packaging materials or containers that are clearly suitable for reuse.

2. For the purposes of subheading 8415 81 001 0, the term “special production facilities” means premises in which the maintenance of precise values of temperature and humidity is due to the operational requirements of the equipment installed therein, such as machines, computers, switching equipment, surgical equipment, etc., or to the operations performed therein.

3. In subheadings 8427 20 190 1, 8427 90 000 1 and 8436 80 100 1, the date of manufacture shall be determined on the basis of the technical documentation of the manufacturer (technical passport, instruction manual) and the manufacturer's plate, which shall be fixed in a conspicuous, easily accessible place of the machinery and shall not be replaced during operation. If the manufacturer's technical documentation and the manufacturer's plate contain conflicting information about the date of manufacture or there is no information about the manufacturer of the equipment on the date of manufacture, then this technique is considered a technique, since the release of which more than 3 years have passed.

If the manufacturer's information indicates only the year of manufacture, then the date of manufacture of the equipment is considered 1 July of the year of manufacture; if the month and year of manufacture are indicated, the date of manufacture is the 15th day of the month specified in the manufacturer's information.

4. For the purpose of classification of goods in subheading 8482 10 900 1 in the states, whose territories constitute the customs territory of the Eurasian Economic Union, when applying the term "French border of the country of importation", the country of import is understood as the customs territory of the Eurasian Economic Union.

5. For the purpose of subheading 8407 10 000 3, the term “take-off power” means the maximum power developed by an aircraft piston engine.

“Take-off power” is specified in the technical documentation and (or) accompanying documents, measured in kilowatts or horsepower (1 kW corresponds to 1.35962 hp).

6. В подсубпозиции 8421 99 000 5 термин «элементы мембранные рулонного типа для фильтрования или очистки жидкостей» означает устройства цилиндрической формы, состоящие из:

- internal plastic perforated tube on which spirally wound membrane bags;

- drainage material located between membrane bags and glued to them on three sides.

The membrane package consists of a twice folded band of membrane containing an extruded grid inside.

At the ends of the membrane roll-type element, fixing discs and sealing cuffs can be installed.

7. For the purposes of subheading 8415 20 000 2, the term “in a single enclosure” refers to air conditioning units (air conditioners) in which all the elements are combined in a single enclosure, frame or platform.

The term "in a single housing" also applies to air conditioning units (air conditioners) in which the refrigeration compressor, which is part of a given air conditioning unit (air conditioner), is located separately, that is, not combined with the rest of the elements in one housing, on one frame or on one platform.

Classification rulings for this code (24)

Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.

Battery mating saw console type is designed for accurate sawing of wooden parts at right and other angles.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum.

The composition of the saw includes: rotary base, carriage, plastic body, electric motor with mounted saw disc. The saw is located on the rotating base on which the carriage moves. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The base of the mince saw is fixed on a flat, durable surface with the help of bolts. Before cutting, the processed part is pressed to the base of the tool with a vise. For cutting with pressure (cutting small parts), the operator, taking up the handle, smoothly lowers the handle to the extreme lower position.

To carry out sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the guidelines through the workpiece. On the saw, it is possible to cut at an angle, cutting with a bevel, complex cutting, processing of belts and grounding with a rounded recess. The package with a saw includes: hard alloy saw disc, dust collector, adjusting triangle, vertical clamp, transmitter WUT01. The battery and battery charger are not included in the package.

Technical characteristics: disc diameter - 216 mm, nominal voltage 40 V, idling frequency - 4800 rpm, maximum thickness sawed 2.4 mm, overall dimensions 702 mm × 551 mm × 557 mm, net weight 17.6 kg. The goods are delivered in assembled form in a cardboard box.

GRI 1, 3(b) and 6

The console-type rechargeable disc saw is designed for precise sawing of wooden parts at right and other angles.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. The structure of the saw includes: rotary base, carriage, plastic case, electric brushless engine with saw disc. The saw is located on the rotating base on which the carriage moves. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The base of the mince saw is fixed on a flat, durable surface with the help of bolts. Before cutting, the processed part is pressed to the base of the tool with a vise.

For cutting with pressure (cutting small parts), the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. To carry out sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the guidelines through the workpiece. On the saw, it is possible to cut at an angle, cutting with a bevel, complex cutting, processing of belts and grounding with a rounded recess. The set of deliveries with a saw includes: saw disc, dust collector, angler, vertical clamp, transmitter WUT01.

The battery and battery charger are not included in the package. Specifications: disc diameter - 305 mm, diameter of the landing hole 30 mm, nominal voltage 40 V, idling frequency - 3600 rpm, maximum thickness saw 3.2 mm, overall dimensions 898 mm × 690 mm × 725 mm, net weight 30.5 kg. The goods are delivered in assembled form in a cardboard box.

GRI 1 and 6

The pit saw is designed for accurate sawing of wooden parts.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. The structure of the saw includes: rotary base, carriage, plastic case, electric motor with mounted saw disc, network electric cable. The saw is located on the rotary base along which the carriage moves To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. To indicate the cutting line of the saw disc, a laser is built into the mating saw, powered by AA-type batteries. The base of the miter saw is attached to the support (for example, the workbench - the workbench is not included in the delivery set) with the help of legs in which there are holes through which the miter saw is attached with bolts to a flat and stable surface.

Before cutting, the processed part is pressed to the base of the tool with a vise. For cutting with pressure (cutting small parts), the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. To carry out sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the railing through the workpiece. The package with a saw includes: hard alloy saw disc, dust collector, adjusting triangle, screw clip, side holder - 2 pcs., end key, AA type batteries - 2 pcs.

Specifications: disc diameter -255 -260 mm, power consumption - 1430 W, nominal voltage 220 - 240 V, speed without load - 4300 rpm, overall dimensions 825 x 536 x 633 mm, net weight 21.5 kg. The goods are delivered in assembled form in a cardboard box.

GRI 1, 3(b) and 6

Торцовочная пила предназначена для точного распиливания деревянных деталей.

Full description

При использовании соответствующего пильного диска возможно распиливание деталей из алюминия. В состав пилы входят: поворотное основание, пластиковый корпус, редуктор, шестерни, подшипники, электрический двигатель со смонтированным пильным диском, сетевой электрический кабель. Для управления процессом распиливания к электродвигателю присоединена рукоятка, на которой имеется выключатель пилы. Основание торцовочной пилы крепится к ровной и устойчивой поверхности болтами через отверстия в основании пилы. Перед резанием обрабатываемая деталь прижимается к основанию инструмента тисками.

Для резания с нажимом оператор, взявшись за рукоятку, плавно опускает ручку в крайнее нижнее положение. В комплект с пилой входят: пильный диск, пылесборник, винтовой зажим, регулировочный треугольник, противонаклонная пластина, боковой держатель 2 шт., торцовый ключ.

Технические характеристики: диаметр диска – 255–260 мм, потребляемая мощность - 1650 Вт, номинальное напряжение 230 В, скорость без нагрузки - 4600 об/мин, габаритные размеры 530 мм x 476 мм x 532 мм, вес нетто 12,4 кг.

Товар поставляется в собранном виде в картонной коробке.

GRI 1, 3(b) and 6

The pit saw is designed for accurate sawing of wooden parts.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. The structure of the saw includes: rotary base, plastic body, gearbox, bearings, electric motor with mounted saw disc, network electric cable. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The base of the mince saw is attached to a flat and stable surface, for example, to the workbench (the workbench is not included in the delivery) with bolts through holes in the base of the saw.

Before cutting, the processed part is pressed to the base of the tool with a vise. For cutting with pressure, the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. The set with the saw includes: dust collector, screw clip, side holder - 2 pieces., end key, cut depth limiter. Specifications: disc diameter - 355 mm, power consumption - 1380 W, nominal voltage 230 V, speed without load - 3200 rpm, overall dimensions 596 mm x 550 mm x 630 mm, net weight 34.2 kg. The goods are delivered in assembled form in a cardboard box.

GRI 1, 3(b) and 6

The pit saw is designed for accurate sawing of wooden parts.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. The structure of the saw includes: rotary base, plastic body, gearbox, bearings, electric motor with mounted saw disc, network electric cable. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The base of the mince saw is attached to the workbench (the workbench is not included in the delivery kit) with bolts through holes in the base of the saw. Before cutting, the processed part is pressed to the base of the tool with a vise.

For cutting with pressure, the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. The set of delivery with a saw includes: saw disc, dust collector, screw clip, adjusting triangle, side holder - 2 pcs., end key, adapter for the dust removal system. Specifications: disc diameter -305 mm, power - 1650 W, voltage 220 - 240 V, speed without load - 4000 rpm, overall dimensions 674 x 610 x 607 mm, net weight 17.3 kg. The goods are delivered in assembled form in a cardboard box.

GRI 1, 3(b) and 6

The pit saw is designed for accurate sawing of wooden parts.

Full description

When using the appropriate saw disc, it is also possible to sawn parts from aluminum. The saw is not designed to cut thick aluminum plates or round parts from aluminum. It consists of the following main parts: fixed base, rotary base, rotary base handle, vertical vise, cutting angle scale, guide line, AC collector motor with mounted saw disc, trigger switch, power cord. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The base of the mince saw is fixed on a flat and stable surface (for example, a workbench - a workbench is not included in the delivery) using four bolts, using bolt holes at the base of the tool.

For cutting with pressure, the operator, taking up the handle, smoothly lowers it to the extreme lower position to cut the workpiece. To cut with a sliding saw with push, the operator presses the handle down and feeds the carriage to the guide line (from itself) through the workpiece, moving the saw disc and producing the saw at the required angle.

Technical characteristics: the maximum diameter of the disk is 260 mm, the number of engine speeds without load 3200 rpm, power consumption - 1510 W, voltage 220-240 V.

Overall dimensions: 718 x 640 x 671 mm, weight 23.6 kg. The chip saw is supplied together with a hard alloy saw disc, guides, dust collector, screw clip, end key, ruler.

The goods are packed in a box of cardboard with the marked.

GRI 1, 3(b) and 6

The pit saw is designed for accurate sawing of wooden parts.

Full description

When using the corresponding saw disc, it is possible to sawn aluminum parts, except for thick or round aluminum profiles. The structure of the saw includes the main nodes: a fixed base, a rotary base, an electric motor with a sawed disk mounted, a network electric cable. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The base of the mince saw is attached to a flat and stable surface, for example, to a workbench (the workbench is not included in the delivery) with two bolts through holes in the base of the saw.

Before cutting, the processed part is pressed to the base of the tool with a vise. For cutting with pressure, the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. The set with the saw includes: end key, dust bag, holder, vertical vise, triangular ruler. Technical specifications: the maximum diameter of the saw disc - 260 mm, power consumption - 1650 W, nominal voltage 220 - 240 V, speed without load - 4600 rpm, overall dimensions 530 x 476 x 532 mm, net weight 12.6 kg. The goods are delivered assembled in a cardboard box with the marking on the box.

GRI 1, 3(b) and 6

The pit saw is designed for accurate sawing of wooden parts.

Full description

When using the appropriate saw disc, it is also possible to sawn parts from aluminum. The saw is not designed to cut thick or round aluminum profiles. It consists of the following main parts: a movable rack, a swivel base, a handle for a swivel base, vertical vise, a trigger switch, a cutting angle scale, guiding rulers, an alternating current collector motor with a saw disk mounted. There's no built-in laser. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch.

The base of the mince saw is fixed on a flat and stable surface (for example, a workbench - a workbench is not included in the delivery) using four bolts, using bolt holes at the base of the tool. For cutting with pressure, the operator, taking up the handle, smoothly lowers it to the extreme lower position to cut the workpiece. To cut with a sliding saw with push, the operator presses the handle down and feeds the carriage to the guide line (from itself) through the workpiece, moving the saw disc and producing the saw at the required angle.

Technical characteristics: disc diameter - 260 (for European countries) mm, engine speed without load 3200 rpm, power consumption - 1510 W, voltage 220-240 V.

Overall dimensions: 805x644x660 mm, weight 21.6 kg. The chip saw is supplied together with a hard alloy saw disc, guides, dust collector, screw clip, end key, ruler.

The goods are packed in a box of laminated cardboard with the marking.

GRI 1, 3(b) and 6

The production line for the manufacture of lumber ...

Full description

(hereinafter - the Line) is a complex line with a single control center on a two-level single support structure with fencing, designed for processing round wood into commercial products (lumber) of a certain quality, formed into transport packages for shipment. Complex technological processing at the production line allows for the supply of round wood for sawing, waste processing into chips and sawdust, sorting, formation of drying stacks and commercial transport packages of lumber. The Line includes the following technologically interconnected functional blocks: a log feeding unit for sawing (a cutting machine, a sawmill line, a frame and a guide under the sawmill line, a cutting machine is not included in the supply); a sawing waste collection unit (chips, sawdust) in the composition with a drum cutting machine; a raw lumber sorting unit consisting of 3 disc cutting saws (dry chambers are not included in the supply); a block for the supply of stacks of dry lumber for revision.

GRI 1, 2(a) and 6

Производственная линия по изготовлению обрезных пиломатериалов карусельного типа (далее – Линия) предназначена для изготовления обрезных пиломатериалов (досок) из брёвен.

Full description

В процессе изготовления используются технологически связанные между собой линии (оборудование), выполняющие окорку, распиливание бревен и обрезку боковых обзольных частей доски (кромки). Распиливание брёвен осуществляется с помощью ленточнопильного станка с ленточными пилами, для обрезки и продольного разделения досок в соответствии с заданными размерами используются обрезной и делильный станки с дисковыми пилами. Принцип работы Линии: бревно подаётся на окорочный станок, где происходит удаление коры. Далее бревно поступает на сканер, измеряющий его геометрические размеры, которые передаются в оптимизатор, определяющий схему раскроя бревна.

После измерения бревно подаётся в фрезерно-брусующий станок для получения двухкантного бруса. Двухкантный брус подаётся в ленточнопильный станок, где осуществляется отделение боковых необрезных досок. Далее двухкантный брус снова направляется на сканер и фрезерно-брусующий станок для получения четырёхкантного бруса, который опять поступает в ленточнопильный станок для его распиловки. Данный цикл распиловки может повторяться до 4 –х раз в зависимости от заданных параметров и диаметра бревна. Боковые необрезные лесоматериалы после отделения от бруса сканируются и через накопитель подаются в обрезной станок, который обрезает обзольную часть доски (кромку), после чего обрезная доска может быть продольно разделена на 2 части с помощью делильного станка.

Компоненты Линии, являющиеся её составными частями: Центрирующий транспортер, Окорочный станок, Устройство выгрузки, Замерное устройство, Кантователь бревен, Устройство загрузки бревен, Фрезерно-брусующий станок, Промежуточный транспортер, Ленточнопильный станок, Отделитель досок с кантователем, Роликовый транспортер с брусоперекладчиком, Поперечный цепной транспортер, Роликовый транспортер, Ленточный транспортерр, Ленточный транспортер, Роликовый транспортер, Транспортер-накопитель и ускорительный транспортер, Роликовый механизм, Сбрасыватель центральных пиломатериалов, Сканер, Сертификат CE-безопасности, двери, замки, ограждения, Шкафы ПРА лесопильной линии, Контрольная электроника сервопозиционеров ... лесопильной линии, линии обрезки, Гидростанция линии окорки, лесопильной линии, линии обрезки, Центральная смазка линии окорки лесопильной линии, линии обрезки, ПЛК и интерфейс «человек-машина» лесопильной линии, Система контроля положения ленточной пилы, Поперечный цепной транспортер, Разобщитель досок, Узел сканирования, Транспортер-накопитель с заслонкой сброса, Транспортер загрузки в обрезной станок, Обрезной станок модели, Отделитель реек, Делительный станок, Замедляющий ленточный транспортер, Замедляющий ленточный транспортер, Сбрасыватель пиломатериалов, ... и сканер, Сертификат CE-безопасности, двери, замки, ограждения, Шкафы ПРА линии обрезки, ПЛК и интерфейс «человек-машина» линии обрезки

GRI 1, 3(c) and 6

Automatic sawing machine with numerical program control (NC) is used in the production of windows, doors and other translucent structures and is designed for cutting complex angles of PVC and aluminum profiles.

Full description

The composition of the goods includes the following main components: a mill; two saw units (heads), on which two saw discs are installed, four vertical pneumatic clips and two horizontal pneumatic clips; two rising pneumatic supports for the workpiece, a workpiece supply table with rollanges; a cooling liquid supply system for saw disks (used only when cutting aluminum profiles); an operator control panel with a printer for printing bar codes.

Principle of operation: the operator after launching the necessary saw program on the electronic panel lays profiles (workpieces) on the feed table, where the workpiece is pressed by pneumatic clips and automatically fed into the saw area. The cutting is carried out according to a given program at the required angle with the help of two saw heads: the left sawhead is permanently fixed on the wall, the right sawhead moves at the required distance along the guides that are installed on the wall. Cutting profiles of aluminum and PVC is carried out by the same saw disc without changing the tool.

The saw disc is specifically designed to cut these materials. Next, the printer prints a sticker with the barcode of the finished product. The operator then extracts the profile from the machine and glues a printed sticker with a barcode on it.

Technical characteristics: the weight of the machine 2350 kg, the speed of rotation of the saw disc 2300 rpm, the diameter of the saw disc 600 mm.

GRI 1, 3(c) and 6

The end disc saw is designed for precise sawing of wooden parts.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. The structure of the saw includes: rotary base, carriage, plastic case, electric motor with mounted saw disc, network electric cable. The saw is located on the rotating base on which the carriage moves. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The saw is screwed with four bolts to a flat and stable surface using bolt holes at the base of the saw. To indicate the cutting line of the saw disc, a laser is built into the miter saw.

Before cutting, the processed part is pressed to the base of the tool with a vise. For cutting with pressure (cutting small parts), the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. To carry out sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the railing through the workpiece. The package with a saw includes: saw disc, vertical vise, end key with hexagon, holder, triangular ruler, dust bag. Specifications: disc diameter 216 mm, nominal voltage 220 V, speed without load - 5000 rpm, overall dimensions 755x450x488 mm, net weight 15.5 kg.

The goods are delivered in a cardboard box.

GRI 1 and 6

The site is designed for pruning and processing of the edges of the fiberboard.

Full description

Delivered unassembled.

The main components: control of the density and thickness of the finished plate, transport roller table, resetting device defective plate, longitudinal feed conveyor, machine for longitudinal pruning, grinder of the edge of the waste (4 pcs.), longitudinal unloading conveyor, conveyor for the supply of side saw, machine for cross-cutting, lateral unloading conveyor, stacker, lateral roller lift (2 pcs.), rolling conveyor of the finished pack plate (2 pneumatic cuts.), pneumatic trimming and pneumatic trimming of the plate.

Principle of operation: after the density and thickness control, the fiberboards are moved using the transport system either to the device for resetting the defective plate, or to the machine for longitudinal pruning of the finished plate, where the longitudinal edges are cut with disk saws along a given width, the transverse edges of the plate are similarly trimmed. Pruning edges are processed in shredders. For further disposal with the help of pneumatic transport, small fractions of waste are moved through the filter and then, using a rotary feeder and scraper transporter, to the storage bin.

The electrical equipment of the site consists of control cabinets, a PLC control system based on controllers with a visualization system.

GRI 1 and 6

The end disc saw is designed for precise sawing of wooden parts.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. The structure of the saw includes: rotary base, carriage, plastic case, electric motor with mounted saw disc, network electric cable. The saw is located on the rotating base on which the carriage moves. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The saw is screwed with two bolts to a flat and stable surface, using bolt holes at the base of the saw. Before cutting, the processed part is pressed to the base of the tool with a vise.

For cutting with pressure (cutting small parts), the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. To carry out sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the railing through the workpiece. The package with a saw includes: saw disc, vertical vise, end key with hexagon, holder, triangular ruler, dust bag. Specifications: disc diameter 190 mm, nominal voltage 220 V, speed without load - 6400 rpm, overall dimensions 670x430x458 mm, net weight 14.2 kg.

The goods are delivered in a cardboard box.

GRI 1 and 6

The machine is designed for sawing wood with a saw disk.

Full description

The composition of the sawing machine includes the following main elements: desktop, auxiliary table, legs, supports, wheel supports, beams, support rods, guide rail, scale, guide bar, corner meter rack, asynchronous electric alternating current motor, high voltage switch, terminal box, power cord, saw disc, protective casing. The operator delivers the processed part manually. The machine carries out longitudinal and transverse sawing of the tree. The main technical parameters: electric current voltage 230-240 V, frequency 50 Hz, current strength 9 A, power consumption 2000 W, disk diameter 315 mm, disk landing 30 mm, angle of inclination 0-45° left, sawing depth: 90 ° - 85 mm, 45 ° - 58 mm, idling frequency 2950 rpm, overall dimensions (DhShV) 1670x700x810 mm, weight 54 kg, power cord length 3 m.

The machine comes assembled in a cardboard box complete with a parallel stop, table extension, pusher, key.

GRI 1 and 6

The dry timber trimming, sorting and packaging line with 50 vertical AS Hekotek 1358 sorting pockets (hereinafter referred to as the Line) is a comprehensive continuous line for the processing and packaging of dry timber of a certain quality with a single control center.

Full description

The line consists of equipment technologically linked into a single continuous production complex line mounted on a single frame with support structures, equipped with areas for maintenance and stairs. The Line consists of the following sections: the drying stack unpacking site, the timber supply site for quality determination, the quality determination site, the lumber cutting site, the post-targeting waste processing site, the sorting site, the packing site, the lumber packing site.

The principle of operation of the Line: the supply of dry boards in drying stacks, unpacking, sawing (cutting) to the desired size, which is carried out by a machining machine - trimmer (15 disk saws) and a saw of the butt (1 disk saw), quality determination, sorting, distribution to sorting pockets, processing of end waste into chips and sawdust, the formation of finished transport packages of lumber. The line is equipped with electric and hydraulic centers that ensure the operation and control of the line.

GRI 1 and 6

Battery mating saw console type is designed for accurate sawing of wooden parts at right and other angles.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. It consists of the following main parts: movable rack, rotary base, handle for rotary base, vertical vise, trigger switch, cutting angle scale, guide rulers, saw disc, built-in laser for more accurate sawing. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The base of the mince saw is mounted on a flat and stable surface using four bolts, using bolt holes at the base of the tool.

For cutting with pressure, the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. To carry out sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the guidelines through the workpiece.

The package includes: saw disc, dust collector, screw clamp, side supports, hexagonal key, adjusting triangle, hose for the vacuum system, bluetooth module for wireless connection to the vacuum cleaner.

Technical characteristics: supply voltage - 36 volts, power - 1600 W; diameter saw disc - 305 mm; weight - 30.7 kg; idling frequency - 4400 rpm; overall dimensions - 898 x 690 x 725 mm. The goods are delivered in assembled form in a cardboard box.

GRI 1 and 6

The end disc saw is designed for precise sawing of wooden parts.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. The structure of the saw includes: a movable rack, a swivel base, a handle for a swivel base, vertical vise, a trigger switch, a cutting angle scale, guiding rulers, an alternating current collector motor, a saw disc, a built-in laser for a more accurate saw. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The saw is located on the rotating base on which the carriage moves. The base of the mince saw is mounted on a flat and stable surface using four bolts, using bolt holes at the base of the tool.

Before cutting, the processed part is pressed to the base of the tool with a vise. For cutting with pressure, the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. For sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the guide through the workpiece. The set of deliveries with a saw includes: saw disc, dust collector, screw clip, side supports, hexagonal key, adjusting triangle, hose for the dust removal system.

Technical characteristics: disc diameter - 305 mm; idling frequency - 3200 rpm; power supply voltage - 220 volts; power consumption - 1800 W; net weight - 29.3 kg; overall dimensions - 898 x 664 x 725 mm. The goods are delivered in a cardboard box.

GRI 1 and 6

The console-type discus saw is designed for precise sawing of wooden parts at right and other angles.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. The structure of the saw includes: a movable rack, a swivel base, a handle for a swivel base, vertical vise, a trigger switch, a cutting angle scale, guiding rulers, an AC collector motor, a saw disc, a built-in laser for a more accurate saw, a power cord. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The saw is located on the rotating base on which the carriage moves. The base of the mince saw is mounted on a flat and stable surface using four bolts, using bolt holes at the base of the tool.

Before cutting, the processed part is pressed to the base of the tool with a vise. For cutting with pressure, the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. For sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the guide through the workpiece. On the saw, it is possible to cut at an angle, cutting with a bevel, complex cutting, cutting boards, processing belts and lineage with a rounded recess. Built-in laser indicates the cut line.

Specifications: disc diameter - 305 mm; landing hole diameter 30 mm; idling frequency - 3200 rpm; power supply voltage - 220 volts; power consumption - 1800 W; laser type: red laser 650 nm with maximum power < 1.6 mW.

The package includes: saw disc, dust collector, screw clamp, side supports, hexagonal key, adjusting triangle, hose for the dust removal system. The goods are delivered in a cardboard box.

GRI 1 and 6

The end disc saw is designed for precise sawing of wooden parts.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. The structure of the saw includes: rotary base, carriage, plastic case, electric motor with mounted saw disc, network electric cable. The saw is located on the rotating base on which the carriage moves. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The saw is screwed with bolts to a flat and durable surface, using bolt holes at the base of the saw. Before cutting, the processed part is pressed to the base of the tool with a vise.

For cutting with pressure, the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. To carry out sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the railing through the workpiece. The package with a saw includes: saw disc, vertical vise, hexagonal key, dust bag. Specifications: disc diameter - 216 mm, electric collector motor: voltage 220 - 240 volts, electric motor power - 1200 W; overall dimensions 705x476x521 mm, net weight 13.9 kg.

The goods are delivered in a cardboard box.

GRI 1 and 6

The end disc saw is designed for precise sawing of wooden parts.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. The structure of the saw includes: rotary base, carriage, plastic case, electric motor with mounted saw disc, network electric cable. The saw is located on the rotating base on which the carriage moves. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The saw is screwed with bolts to a flat and durable surface, using bolt holes at the base of the saw. Before cutting, the processed part is pressed to the base of the tool with a vise.

For cutting with pressure, the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. For sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the guide through the workpiece. The package with a saw includes: saw blade, vertical vise, dust bag, six-sided key. Specifications: disc diameter - 260 mm, electric collector motor: voltage 220 - 240 volts, electric motor power - 1450 W; overall dimensions 745 x 497 x 565 mm, net weight 16.4 kg.

The goods are delivered in a cardboard box.

GRI 1 and 6

The end disc saw is designed for precise sawing of wooden parts.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum. It consists of the following main parts: movable rack, swivel base, handle for swivel base, vertical vise, trigger switch, cutting angle scale, guide rulers, AC collector motor, saw disc, built-in laser for more accurate sawing. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The base of the mince saw is mounted on a flat and stable surface using four bolts, using bolt holes at the base of the tool.

Before cutting, the processed part is pressed to the base of the tool with a vise. For cutting with pressure, the operator, taking up the handle, smoothly lowers the handle to the extreme lower position. To carry out sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the railing through the workpiece. The set of deliveries with a saw includes: saw disc, dust collector, screw clip, side supports, hexagonal key, adjusting triangle, hose for the dust removal system.

Technical characteristics: supply voltage - 220 V; disc diameter - 260 mm; power consumption - 1510 W; weight - 26.6 kg; idling frequency - 3200 rpm; overall dimensions - 805 x 644 x 660 mm.

The goods are supplied in a box of laminated cardboard.

GRI 1 and 6

Battery mating saw console type is designed for accurate sawing of wooden parts at right and other angles.

Full description

When using the appropriate saw disc, it is possible to sawn parts from aluminum.

The main components of the product in question are: rotary base, carriage, plastic case, electric brushless engine with mounted saw disc. The saw is located on the rotating base on which the carriage moves. To control the sawing process, a handle is attached to the electric motor, on which there is a saw switch. The base of the mince saw is fixed on a flat, durable surface using four bolts. Before cutting, the processed part is pressed to the base of the tool with a vise. For cutting with pressure, the operator, taking up the handle, smoothly lowers the handle to the extreme lower position.

To carry out sliding cutting with pushing (cutting wide parts), the operator presses the handle down and applies the carriage to the guidelines through the workpiece.

The package includes: saw disc, coal mine, clamping. The battery, battery charger and WUT01 transmitter are not included.

Technical characteristics: supply voltage - 40 volts, power - 1600 W; diameter saw disc - 260 mm; weight (without batteries) - 26.6 kg; idling frequency - 3600 rpm; overall dimensions - 805 x 644 x 660 mm. The goods are delivered in assembled form in a cardboard box.

GRI 1 and 6

What import requires

Russian bans and restrictions

May apply

Whether a measure applies to your goods is determined by the provisos in the “code” column. Measures are taken from the register as of the date the act was published; the act is named on every line

  • 8465Out of RussiaProhibited

    Отдельные виды товаров — временный запрет на вывоз

    Станки (включая машины для сборки с помощью гвоздей, скоб, клея или другими способами) для обработки дерева, пробки, кости, твердой резины, твердых пластмасс или аналогичных твердых материалов

    Постановление Правительства РФ от 09.03.2022 № 311 — until Dec 31, 2027

  • 8465Out of RussiaPermit required

    Промышленная продукция

    Станки (включая машины для сборки с помощью гвоздей, скоб, клея или другими способами) для обработки дерева, пробки, кости, твердой резины, твердых пластмасс или аналогичных твердых материалов

    Постановление Правительства РФ от 09.03.2022 № 312 — until Dec 31, 2027

Veterinary and sanitary control

Goods fall under supervision by their type and characteristics

  • Sanitary and epidemiological supervision (control)

    rule for the whole chapter 84
    Материалы, оборудование, вещества, устройства, применяемые в сфере хозяйственно-питьевого водоснабжения и при очистке сточных вод, в плавательных бассейнах; Продукция машиностроения и приборостроения производственного, медицинского и бытового назначения, кроме запасных частей к транспортным средствам и бытовой технике (за исключением контактирующих с питьевой водой и пищевыми продуктами); Продукция, изделия, являющиеся источником ионизирующего излучения, в том числе генерирующего, а также изделия и продукция (товары), содержащие радиоактивные вещества; Строительное сырье и материалы, в которых гигиеническими нормативами регламентируется содержание радиоактивных веществ, в том числе производственные отходы для повторной переработки и использования в народном хозяйстве, лом черных и цветных металлов (металлолом); Оборудование, материалы для воздухоподготовки, воздухоочистки и фильтрации; Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры

    Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

  • ТР ТС 010/2011Safety of machinery and equipment
    • Станки деревообрабатывающие бытовые — certificate of conformity (part of the heading)
    • Оборудование для переработки полимерных материалов — declaration of conformity or certificate of conformity (part of the heading)
    • Оборудование деревообрабатывающее (за исключением станков деревообрабатывающих бытовых) — declaration of conformity or certificate of conformity (part of the heading)
    • Оборудование технологическое для лесозаготовки, лесобирж и лесосплава (за исключением пил бензиномоторных и цепных электрических) — declaration of conformity or certificate of conformity (part of the heading)
  • ТР ЕАЭС 037/2016Restriction of the Use of Hazardous Substances in Electrical and Radio Electronics Products
    • станки малогабаритные для индивидуального пользования деревообрабатывающие — declaration of conformity

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

How it is done in practice

Valid documents in the EAEU unified register for subheading 8465 91: certificates 458, declarations 1,510.

By technical regulation
ТР ТС 010/20111,683ТР ТС 020/20111,544ТР ТС 004/2011640ТР ЕАЭС 037/2016260
Schemes
1д1,3263с2891с1604д782д72The letter after the scheme number shows the form: certification or declaration of conformity.
Most active certification bodies
ООО «ВИПТЕСТ»ООО «Гильдия Качества»ОС «Центр аналитических технологий «Прогресс»
Manufacturers outside the EAEU
China664Türkiye71Italy42Germany36Taiwan24Austria9

Manufacturers of these goods →Check a supplier’s document by its number →

Tariff preferences

The code is on the EAEU list of preferential goods: for goods originating in a beneficiary country the duty is lower

Least developed countrieszero rate0%
46 countries

Burkina Faso, Guinea, Eritrea, Congo - Kinshasa, Timor-Leste, Afghanistan, Mauritania, Yemen, Cambodia, Lesotho, Laos, Bangladesh, Nepal, Tanzania, Palestinian Territories, Angola, Benin, Burundi, Haiti, Gambia, Guinea-Bissau, Djibouti, Zambia, Kiribati, Liberia, Madagascar, Malawi, Mali, Mozambique, Niger, Rwanda, Senegal, Myanmar (Burma), Sudan, Sierra Leone, Uganda, Chad, South Sudan, Syria, Solomon Islands, Comoros, Togo, Tuvalu, Ethiopia, Somalia, Central African Republic

The preference requires a document of origin and compliance with the direct consignment rule; customs checks the right to it at declaration.

Payments on import

Duty for this code: 0%. On top of the duty, on import into Russia you pay VAT of 22% of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

Import VAT in EAEU countries

  • Russia22%
  • Kazakhstan16%
  • Belarus20%
  • Armenia20%
  • Kyrgyzstan12%

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

Calculate the whole deal →Quick payment estimate →

The right code is in the HS code search.