EAEU HS code

8467 21 100 0 — Drills of all kinds for working in the hand, with self-contained electric motor capable of operation without an external source of power

Drills of all kinds for working in the hand, with self-contained electric motor capable of operation without an external source of power

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Duty rate

8.5%

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit

шт

Item

Requirements and measures

Veterinary and sanitary control1
Conformity assessment9

None: russian bans and restrictions, dual use, EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT

22%

The general import rate in Russia: Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025). This code is not named on the 10% VAT list (Decree No. 908) or the exemption list (No. 1042). The list of medical goods No. 688 is not checked here.

Where it sits in the nomenclature

Section XVI. Machinery and mechanical appliances; electrical equipment; parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles

84Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
8467Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor; parts thereof
8467 21Drills of all kinds for working in the hand, with self-contained electric motor
8467 21 10Drills of all kinds for working in the hand, with self-contained electric motor capable of operation without an external source of power
8467 21 100 0you are here

Explanatory notes to heading 8467 4 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

8467 Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor: – Pneumatic: 8467 11 – – Rotary type (including combined rotary-percussion) 8467 19 – – Other – With self-contained electric motor: 8467 21 – – Drills of all kinds 8467 22 – – Saws 8467 29 – – Other – Other tools: 8467 81 – – Chain saws 8467 89 – – Other – Parts: 8467 91 – – Of chain saws 8467 92 – – Of pneumatic tools 8467 99 – – Other

This heading covers tools comprising an electric motor, a compressed air engine (or a compressed air piston), an internal combustion engine or any other engine (e.g. a small hydraulic turbine); an engine powered by compressed air (a) is normally powered by an external source of compressed air, and in the case of an internal combustion engine, the batteries of the ignition system are sometimes located separately. In pneumatic instruments, the action of compressed air is sometimes supplemented by hydraulic connections. These instruments are classified in this heading only if they are hand tools. The expression "hand tools" means tools that are designed to be held in the hand during use, as well as heavier tools (such as tamping to seal the ground), which are portable, that is, can be lifted and manually carried by the operator m, especially in the process of performing work, and which are also designed to control and direct the movement of the hand during operation. To prevent fatigue during operation caused by exposure to their full weight, such tools can be used with auxiliary support devices (for example, tripods, jack racks, suspended lifting waist). However, some hand tools of this heading have devices enabling them to be temporarily fixed on the pole. When presented together with a support, such instruments are classified in this heading provided that they are in fact “hand tools” as defined above. Some instruments falling under this heading may be equipped with additional devices (e.g. a fan and a dust collector for the removal and collection of dust during operation). This heading does not include tools which, because of their mass, size, etc., are obviously not capable of being held by hand as described above. It also excludes tools (portable or non-portable) equipped with a support plate or other device for fastening on a wall, workbench, floor, etc., tools that are equipped with devices for moving on rails (for example, machines for cutting grooves in railway sleepers or drilling them), and machines moved and controlled from behind by a walking operator, or similar machines on wheels operated by hand, for example, machines for grinding floors made of concrete, marble or wood, etc. In addition, this heading does not include kits consisting of a fixture for securing a working tool with one or more working tools and a separate spark-ignition internal combustion piston engine or a separate electric motor with a flexible drive shaft; a fixture for securing a working tool is classified in heading 8466, an engine with a flexible drive shaft is classified in heading 8407 or 8501, as the case may be, and the working tools are classified in the relevant headings. The instruments of this heading include tools for the processing of various materials and are used in various branches of industry. If the above conditions are met, this heading covers, inter alia: (1) Machines for drilling, cutting threads with a meter or opening openings. (2) Drilling machines, drill hammers and the like. (3) Wrenches, screwdrivers, nuts. (4) Devices for planing, adjustment to a certain size, edges of the plane or similar devices.

(5) Sewing machines, grinding machines using abrasive stones, skins, polishing machines and the like. (6) Machines with wire brushes. (7) Circular saws, chain saws and the like. (8) Various types of hammers, e.g. cutting hammers, scale upholstery hammers, minting hammers, riveting hammers, concrete crushers. (9) Sealing type rivet hammers; rivet cutting devices and other collapsing devices. (10) Sheets for metal sheet (scissor or matrix type). (11) Tampering of molding mixture, rod knocking tool for removing rods from castings, vibrators for casting forms. (12) Tampering for soil compaction in the construction or repair of roads. (13) Automatic shovels. (14) Vibrators for concrete, facilitating its movement and laying. (15) Machines for cutting hedges. (16) Devices for removing scale from boilers having a hydraulic actuator. (17) Compressed-air lubricating pistols for garages, etc. (18) Portable machines for processing lawns, cutting grass, for example, in corners, along walls, curbs, under bushes. Such machines have a built-in motor in a light metal frame and a cutting device, usually consisting of a thin nylon thread. (19) Portable shrubs with built-in motor, drive shaft (rigid or flexible) and working tool holder, presented together with various interchangeable cutting tools, for installation in the holder of the working tool. (20) Cutting materials used in the textile industry. (21) Engraving tools. (22) Manual electric scissors, consisting of a fixed cutting blade and a movable cutting blade operated by an integrated electric motor, used in a clothing workshop, hat workshops, households, etc. PARTS Subject to the general provisions relating to the classification of parts (see the general provisions of Section XVI), this heading also includes parts (other than fixtures for securing the working tool of heading 8466) of the instruments of this heading. This heading also does not cover: (a) grinding, sharpening, polishing, cutting circles and anilological articles of stone, ceramics or agglomerated abrasives (heading 6804); (b) instruments of Chapter 82; (c) air compressors (heading 8414);

(d) appliances for spraying or atomising liquids or powders, hand-operated sprayers, sand blasting machines and similar appliances (heading 8424); (e) electric lawn mowers (heading 8433); (f) electro-mechanical domestic appliances (heading 8509); (g) electric shavers, hair clippers and hair-removing appliances of heading 8510; (h) electro-mechanical hand tools for medical or dental use (heading 9018).

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 84 — Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof 24 items

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) millstones, grinding stones or other articles of Chapter 68;

(b) equipment or devices (e.g. pumps) of ceramic materials and ceramic parts of machinery or devices of any material (Chapter 69);

(c) laboratory glassware (heading 7017); equipment, devices or other articles for technical purposes or parts thereof of glass (heading 7019 or 7020);

(d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81);

(e) vacuum cleaners of heading 8508;

(f) electromechanical household appliances of heading 8509; digital cameras of heading 8525;

(g) radiators for articles of Section XVII; or

(h) manual mechanical brushes for floor cleaning, without engine (heading 9603).

2. Subject to the provisions of Note 3 to Section XVI and Note 11 to this Chapter, a machine or device which meets the description in one or more of headings 8401 to 8424 or heading 8486 and at the same time the description in one or more headings 8425 to 8480 is included in the relevant heading of the first series of headings or in heading 8486 as the case may be, and not in the second series.

(A) However, heading 8419 does not cover:

(i) seed germination equipment, incubators or brooders (heading 8436);

(ii) machinery for wetting grains (heading 8437);

(iii) diffusion apparatus for the extraction of sugary juice (heading 8438);

(iv) equipment for the heat treatment of textile yarn, textile materials or finished textile articles (heading 8451); or

machining equipment, assemblies or laboratory equipment in which temperature change, even if necessary, is an auxiliary process.

(B) Heading 8422 does not cover:

(i) sewing machines for sewing bags or similar packagings (heading 8452); or

(ii) office equipment of heading 8472.

(i) paint-blasting printing presses (heading 8443); or

(ii) water jet cutting machines (heading 8456).

3. A machine for processing any material which corresponds to the description of heading 8456 and simultaneously to the description of heading 8457 to 8461, 8464 or 8465 is classified in heading 8456.

4. Heading 8457 covers only metalworking machines other than lathes (including multipurpose lathes) which may perform different types of machining operations by:

(a) the automatic replacement of tools from a tool store or similar device in accordance with the processing program(s);

(b) the automatic application simultaneously or sequentially of different processing heads operating at a fixed workpiece (assembly single-position machines); or

5. For the purposes of heading 8462, the term “longitudinal cutting line” for flat products means a process line consisting of a winder, a correct device, a longitudinal cutting device and a winder. The term “cross-cutting line” for flat products means a process line consisting of a unwinder, a correct device and a cutting device.

6. (A) For the purposes of heading 8471, the term “computers” means machines capable of:

(i) store the processing program or programs and at least the information currently necessary to execute the program;

(ii) be freely reprogrammable according to user requirements;

(iii) perform user-defined arithmetic calculations; and

(iv) perform, without human intervention, a processing program requiring the computer to modify its actions by making logical decisions during processing.

(B) Computing machines can be made in the form of systems consisting of a different number of individual blocks.

(C) Subject to the provisions of Notes (D) and (E) below, a block shall be treated as part of a computing system if it satisfies all of the following conditions:

(i) exclusively or principally used in a computing system;

(ii) is capable of being connected to the central processing unit either directly or through one or more other units; and

(iii) is capable of receiving or presenting information in such form (codes or signals) as may be used by the system.

Separately presented computer units are classified in heading 8471.

However, keyboards, X-Y-coordinate input devices and disk storage units which satisfy the conditions laid down in Notes (B) (ii) and (B) (iii) above are in all cases to be regarded as blocks of heading 8471.

(D) Heading 8471 does not cover the following devices, presented separately, even if they meet all the conditions of Note 6(C) above:

(i) printers, copiers, facsimile machines, combined or not;

(ii) apparatus for receiving or transmitting voice, images or other data, including apparatus for providing communications over a wired or wireless communication network (for example, on a local or wide area network);

(iii) loudspeakers and microphones;

(iv) television cameras, digital cameras and video recording cameras;

(v) monitors and projectors not combined with television reception equipment.

(E) Machines containing or working in conjunction with a computer and performing specific functions other than information processing are classified in the headings according to their specific functions or, if this is not possible, in the residual headings.

7. Heading 8482, inter alia, covers polished steel balls whose maximum and minimum diameter does not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is smaller. Other steel balls are classified in heading 7326.

8. A machine which is used for more than one purpose shall be classified as if its primary purpose were the only one.

Subject to the provisions of Note 2 to this Chapter and Note 3 to Section XVI, a machine whose primary purpose is not described in any heading or a machine in which none of its functions is primary is classified in heading 8479, unless the context otherwise provides. Heading 8479 also includes machinery for the manufacture of ropes or ropes (e.g. knitting machines) from metal wire, textile yarn or other materials or from a combination of such materials.

9. For the purposes of heading 8470, the term “pocket” applies only to devices not exceeding 170 x 100 x 45 mm.

10. For the purposes of heading 8485, the term additive manufacturing (also referred to as 3D printing) means the formation of physical objects based on a digital model by successively adding and layering, sealing and curing a material (e.g., metal, plastics or ceramics).

Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machines as described in heading 8485 are classified in that heading and no other heading of the Nomenclature.

11. (A) Notes 12(a) and 12(b) to Chapter 85 also apply to the terms “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this note and in heading 8486. However, in this note and in heading 8486, the term "semiconductor devices" also applies to photosensitive semiconductor devices and LEDs.

(B) In this note and in heading 8486, the term “plane display panel production” covers the fabrication of a flat panel of substrates. It does not cover the production of glass or the installation of printed circuit boards or other electronic components on flat panels. The term "flat display panel" does not apply to cathode ray tube technology.

(i) producing or eliminating defects in masks and patterns;

assemblies of semiconductor devices or electronic integrated circuits;

(iii) lifting, manipulating, loading or unloading boules, plates, semiconductor devices, electronic integrated circuits and flat display panels.

(D) Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machinery meeting the description in heading 8486 is classified in this heading and in no other heading of the Nomenclature.

Subheading notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. For the purposes of subheading 8465 20, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.

2. For the purposes of subheading 8471 49, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).

3. For the purposes of subheading 8481 20, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481.

4. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.

Additional notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheadings 8407 10 and 8409 10, the term “aviation engines” shall apply only to engines intended for assembly with an air or rotor.

2. В подсубпозицию 8471 70 300 0 также включаются устройства считывания компакт-дисков, являющиеся запоминающими устройствами вычислительных машин, которые предназначены для считывания сигналов с CD-ROM, аудиокомпакт-дисков и фотокомпакт-дисков и снабжены разъемом для наушников, регулятором громкости или кнопкой пуск/стоп.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheading 8482 10 900 1, the term “gross mass” means the total mass of the goods with all kinds of packaging materials and packagings ensuring their safety during storage and transport. The total weight of the goods does not include the mass of packaging materials or containers that are clearly suitable for reuse.

2. For the purposes of subheading 8415 81 001 0, the term “special production facilities” means premises in which the maintenance of precise values of temperature and humidity is due to the operational requirements of the equipment installed therein, such as machines, computers, switching equipment, surgical equipment, etc., or to the operations performed therein.

3. In subheadings 8427 20 190 1, 8427 90 000 1 and 8436 80 100 1, the date of manufacture shall be determined on the basis of the technical documentation of the manufacturer (technical passport, instruction manual) and the manufacturer's plate, which shall be fixed in a conspicuous, easily accessible place of the machinery and shall not be replaced during operation. If the manufacturer's technical documentation and the manufacturer's plate contain conflicting information about the date of manufacture or there is no information about the manufacturer of the equipment on the date of manufacture, then this technique is considered a technique, since the release of which more than 3 years have passed.

If the manufacturer's information indicates only the year of manufacture, then the date of manufacture of the equipment is considered 1 July of the year of manufacture; if the month and year of manufacture are indicated, the date of manufacture is the 15th day of the month specified in the manufacturer's information.

4. For the purpose of classification of goods in subheading 8482 10 900 1 in the states, whose territories constitute the customs territory of the Eurasian Economic Union, when applying the term "French border of the country of importation", the country of import is understood as the customs territory of the Eurasian Economic Union.

5. For the purpose of subheading 8407 10 000 3, the term “take-off power” means the maximum power developed by an aircraft piston engine.

“Take-off power” is specified in the technical documentation and (or) accompanying documents, measured in kilowatts or horsepower (1 kW corresponds to 1.35962 hp).

6. В подсубпозиции 8421 99 000 5 термин «элементы мембранные рулонного типа для фильтрования или очистки жидкостей» означает устройства цилиндрической формы, состоящие из:

- internal plastic perforated tube on which spirally wound membrane bags;

- drainage material located between membrane bags and glued to them on three sides.

The membrane package consists of a twice folded band of membrane containing an extruded grid inside.

At the ends of the membrane roll-type element, fixing discs and sealing cuffs can be installed.

7. For the purposes of subheading 8415 20 000 2, the term “in a single enclosure” refers to air conditioning units (air conditioners) in which all the elements are combined in a single enclosure, frame or platform.

The term "in a single housing" also applies to air conditioning units (air conditioners) in which the refrigeration compressor, which is part of a given air conditioning unit (air conditioner), is located separately, that is, not combined with the rest of the elements in one housing, on one frame or on one platform.

EEC classification decisions (2)

Binding in all EAEU member states: if the goods match the description, the decision fixes the code

8467 21Decision No. 110 of Oct 3, 2024decision text → No. 110, opens in a new tab
Перфоратор
8467 21 100 0Decision No. 141 of Oct 11, 2022decision text → No. 141, opens in a new tab
Дрель-шуруповерт аккумуляторная

Classification rulings for this code (27)

Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.

A battery drill screwdriver is an electric tool designed to drill holes in wood, metal and work with fasteners.

Full description

It has a built-in electric motor and has the ability to operate without an external power source.

Technical characteristics: voltage 20 V, revolutions 0-400/0-1400, maximum torque: 35 N·m, type of cartridge: fast-clamping, number of torque stages: 22 + 1, backlight. This device is not intended for commercial use. Included: device, 2 batteries with a voltage of 20 V, charger, bit (PH2 50 mm), user manual, case

GRI 1 and 6

A battery drill screwdriver, which is a manual tool of rotational action with a built-in electric motor, designed for drilling holes in various materials (metal, wood, plastic, etc.), and for screwing (unscrewing) screws and screws.

Full description

The tool consists of the following main elements: body, electric motor, gearbox, quick-clamp cartridge, switch, sleeve switching modes and torque adjustment, speed switch, reverse switch, battery, charger, automatic lighting, handle. The tool is turned on by pressing the switch, changing the spindle speed from the minimum value to the maximum is achieved by increasing the force of pressing the switch. Drilling of materials is carried out by setting the value of the sleeve switching modes and adjusting the torque in the "drill" position.

Screwing (unscrewing) screws and screws is carried out when installed on the scale of the sleeve switching modes and adjusting the torque values from 1 to 18.

Technical characteristics: supply voltage 18 V; idling speed: 1 speed 0-350 rpm, 2 speed 0-1350 rpm; number of stages of adjustment of the timing of tightening 18; maximum torque 36 Nm; overall dimensions (DhShV) 190x75x200 mm; maximum diameter of drilling steel/wood 10/25 mm; weight not more than 0.85 kg (without battery); battery type Li-ion (battery capacity 2 Ah).

The goods are packed in a case for storage and carrying together with the operating manual, battery, power supply.

GRI 1 and 6

The battery punch is an impact drill and is a hand tool with an integrated electric motor.

Full description

The tool is designed for percussion and conventional drilling of brick, concrete and stone, as well as for non-impact drilling of wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic case, an electric DC brush motor, a cartridge, a gearbox body assembled, a barrel assembled, an inner body, a trigger switch, a reverse switch lever, a mode change lever. Drilling of impact/impactless materials is carried out by means of a drill (not included in the package). In this case, the lever for changing the mode of operation is set in the position of “perforator” or “drill”.

Implementation of the impact function of the drill without the drilling function (rotation of the cartridge) is impossible.

Technical characteristics: diameter of holes: concrete up to 16 mm, steel up to 13 mm, wood up to 24 mm, number of revolutions without load 0-1 600 rpm, number of strokes per minute 0-5 300, total length - 297 mm, nominal voltage 18 V DC. The tool comes in conjunction with an impact-resistant suitcase, side handle, restrictive stop, charger and 2x4.0Ah battery pack.

GRI 1 and 6

The battery shock drill screwdriver is a handheld tool with a built-in electric motor.

Full description

The tool is designed to drill holes with impact action in brick and stone masonry. In the mode of normal (impactless) action, you can use the tool as a screwdriver, as well as drill wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic case, an electric brushless BL motor, a gearbox, a quick-clamp cartridge with a clutch, a trigger switch, a reverse switch lever, a speed change lever, a lamp, a mode change ring, an adjustment ring. The tool provides three modes of operation: drill mode (only rotation), punch mode (rotation with impact), screwdriver mode (rotation with slipping of the clutch).

To select the mode of operation, the mark of the type of work (drill, hammer or screw), applied on the ring of changing the mode of operation, is combined with the arrow on the body of the tool. The torque of the tightening is adjusted by turning the adjustment ring (the minimum torque corresponds to position 1, the maximum - 20). To change the speed of operation, the speed lever is transferred to position 1 (for low revs) or position 2 (for high revs). Technical specifications: nominal voltage 18 V DC, overall dimensions (DhShV) 164×81×248 mm, drilling diameter (steel/wood/brick) 13/36/13 mm, maximum torque (hard/soft puff) 40/25 Nm, idling frequency (1/2 speed) 0-500/0-1700 rpm, impact frequency (1/2 speed) 0-7500/0-25500 beats/min.

The tool is packed in a cardboard box along with a bat and a belt mount clip. The battery pack is not included in the delivery package.

GRI 1 and 6

The three-mode battery perforator is an impact drill and is a hand tool with an integrated electric motor.

Full description

The tool is designed for percussion drilling and drilling of brick, concrete and stone, as well as for crushing. The tool is also suitable for non-impact drilling of wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic body, a brush electric motor, a cartridge adapted for a tailing, a gearbox assembly, a shaft, a clutch, a trigger switch, a reverse switch to change the direction of rotation, a mode change handle, a side handle. The instrument has a torque limiter. The choice of the mode of operation of the tool (“rotation with impact”, “rotation only” or “impact only”) is carried out by turning the handle of changing the mode of operation.

Technical characteristics: diameter of holes: concrete up to 20 mm, steel up to 13 mm, wood up to 26 mm, number of revolutions without load 0 - 1200 rpm, frequency of impacts 0-4000 bpm, overall dimensions (DhShV) 417 x 84 x 219 mm, impact energy 1.9 J, nominal voltage 18 V DC. The tool is packed in a cardboard box along with a depth limiter. The battery unit and battery charger are not included in the package.

GRI 1 and 6

The battery corner drill is a manual rotary action tool with a built-in electric brush AC motor.

Full description

The tool is designed for drilling wood, metal and plastic. The tool consists of the following main elements: plastic body, electric motor, drill cartridge, electronic speed adjustment, gear, electric brake, work area illumination, switch lever, reverse switch lever. Drilling of materials is carried out through the head of the drill. For installation, the drill head is inserted to the point in the drill cartridge and manually tighten the clamping cartridge. The cartridge key is inserted into each of the three holes and tightened clockwise.

All three holes of the cartridge tighten evenly. To remove the head of the drill, the cartridge key is turned counterclockwise in only one hole, then the cartridge is weakened manually.

Technical characteristics: steel/wood diameter 10/12 mm, idling frequency 0-1100 rpm, 10 mm cartridge, overall dimensions (DhShV) 332x68x86 mm, nominal voltage 12V, weight 1.3 kg. The tool is packed in a cardboard box together with a bat, fastener on the belt. The battery pack is not included in the delivery package.

GRI 1 and 6

The three-mode battery perforator is an impact drill and is a hand tool with an integrated electric motor.

Full description

The tool is designed for percussion drilling and drilling of brick, concrete and stone, as well as for crushing. The tool is also suitable for non-impact drilling of wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic case, a brushless electric motor, a cartridge adapted for a tailing, a gearbox body assembled, a spindle, a trigger switch, a reverse switch, a mode change handle, a handle. The choice of the mode of operation of the tool (“rotation with impact”, “rotation only” or “impact only”) is carried out by turning the handle of changing the mode of operation.

Technical characteristics: diameter of holes: concrete up to 24 mm, steel up to 13 mm, wood up to 27 mm, number of revolutions without load 0-950 rpm, frequency of impacts 0-4700 bpm, overall dimensions (DhShV) 328 x 85 x 213 mm, impact energy 2 J, nominal voltage 18 V DC, weight 3.3 kg. The tool is packed in a cardboard box along with a depth limiter. The battery pack is not included in the delivery package.

GRI 1 and 6

The three-mode battery perforator is an impact drill and is a hand tool with an electric brush engine built in.

Full description

The tool is designed for percussion and ordinary drilling of brick, concrete and stone, for crushing, as well as for non-impact drilling of wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic case, an electric motor with electronic speed adjustment, a cartridge adapted for a tailing, a disengagement clutch, a lamp, a gearbox body assembled, a trigger switch, a reverse switch lever, a mode change lever, a handle. Drilling of impact/impactless materials is carried out by means of a drill (not included in the package).

In this case, the lever for changing the mode of operation is set in the position of “perforator” or “drill”. Supplementation of materials is carried out when installing the lever mode of operation in the position of "perforator". Implementation of the impact function of the drill without the drilling function (rotation of the cartridge) is impossible. For smooth operation of the tool and prolongation of the operation service, a small amount of lubrication is applied to the head of the drill tail.

Technical characteristics: diameter of holes: concrete up to 26 mm, steel up to 13 mm, wood up to 32 mm, number of revolutions without load 0-1250 rpm, frequency of impacts 0-5000 bpm, overall dimensions (DhShV) 350x116x232 mm, nominal voltage 36 V DC. The tool comes together with an impact-resistant suitcase, side handle, depth limiter, lubricant for drills. The battery pack is not included in the delivery package.

GRI 1 and 6

The three-mode battery perforator is an impact drill and is a hand tool with an integrated electric brushless motor.

Full description

The tool is designed for percussion and conventional drilling of brick, concrete and stone, chisel processing, as well as for shockless drilling of wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic case, an electric motor, a cartridge adapted for a tailing, a regulating disk, a lamp, a gearbox assembly, a spindle, a trigger switch, a reverse switch lever, a mode change handle, a handle. Drilling of impact/impactless materials is carried out by means of a drill (not included in the package).

In this case, the handle for changing the mode of operation is set in the position of "perforator" or "drill". Shock action (splitting, scraping or destruction with the help of a chisel) is carried out when the handle is installed in the position of "perforator". Implementation of the impact function of the drill without the drilling function (rotation of the cartridge) is impossible. For smooth operation of the tool and prolongation of the operation service, a small amount of lubrication is applied to the head of the drill tail.

Technical characteristics: diameter of holes: concrete up to 28 mm, steel up to 13 mm, wood up to 32 mm, number of revolutions without load 0-980 rpm, frequency of impacts 0-5000 bpm, overall dimensions (DhShV) 404x134x232 mm, nominal voltage 36 V DC. The tool comes in conjunction with the Macras case, side handle, depth limiter, lubricant for the drills. The battery pack is not included in the delivery package.

GRI 1 and 6

The battery drill screwdriver is a manual rotary action tool with a built-in electric brushless motor.

Full description

The tool is designed for drilling holes in various materials (metal, wood, plastic), as well as for screwing / unscrewing screws and screws. The tool consists of the following main elements: plastic body, electric motor, electric brake, electronic speed control, aluminum gear cover, quick-clamp cartridge, torque control ring, clutch, forward/reverse rotation switch, speed change lever, rubberized handle, LED lighting, trigger switch on. Off. Drilling of materials is carried out through the head of the drill. Screwing / unscrewing of screws and screws is carried out by means of a screwdriver nozzle.

Adjustment of the torque of the tool is carried out by turning the adjustment ring. The torque is adjusted from minimum (position 1 on the adjustment scale) to maximum (position "drill" on the adjustment scale). When installed on the torque adjustment scale from 1 to 21, screws and screws are screwed, when setting the torque value in the drill position, holes are drilled. The tool has two speed modes: speed 1 - high torque at lower speed for high load work; speed 2 - low torque at high speed for low load work. The tool comes in a cardboard box together with a belt fastener, bat.

Technical characteristics: overall dimensions (DhShV) 164x86x215 mm, cartridge diameter 13 mm, maximum torque (hard/soft puff) 65/30 Nm, idling frequency 1st speed 0-600 rpm, 2nd speed 0-2200 rpm, maximum diameter of drilling steel/wood 13/38 mm, power 750 W. The battery pack is not included in the delivery package.

GRI 1 and 6

The battery shock drill screwdriver is a hand tool with an integrated electric motor.

Full description

The tool is designed to drill holes with impact action in brick and stone masonry. In the mode of normal (impactless) action, you can use the tool as a screwdriver, as well as drill wood, metal, ceramics and plastic. The tool consists of the following main elements: plastic body, electric brushless motor, gearbox, quick-clamp cartridge, trigger switch, reverse switch lever, speed change lever, lamp, ring change mode. The tool provides three modes of operation: drill mode (only rotation), punch mode (rotation with impact), screwdriver mode (rotation with slipping the clutch).

Technical specifications: nominal voltage 18V DC, overall dimensions (DhShV) 182x79x237 mm, diameter of drilling (steel/wood/brick) 13/38/13 mm, diameter of fast-clamp cartridge 13 mm, maximum torque (hard/soft puff) 50/27 Nm, idling frequency (1/2 speed) 0-500/0- 1900 rpm, frequency of impacts (1/2 speed) 0-7500/0-38500 beats/min. The tool is packed in a cardboard box together with a belt fastener, a bat. The battery pack is not included in the delivery package.

GRI 1 and 6

The battery drill screwdriver is a manual rotary action tool with a built-in electric brush motor.

Full description

The tool is designed for drilling holes in various materials (metal, wood, plastic), as well as for screwing / unscrewing screws and screws. The tool consists of the following main elements: plastic body, electric 4 pole motor, electric brake, electronic speed control, three-speed gearbox, quick-clamp cartridge, torque control ring, forward/reverse rotation switch, speed change lever, mode change lever, LED backlight, clutch, rubberized handle, trigger switch on. Off. Drilling of materials is carried out through the head of the drill.

Screwing / unscrewing of screws and screws is carried out by means of a screwdriver nozzle. Adjustment of the torque of the tool is carried out by turning the adjustment ring. When installed on the torque adjustment scale from 1 to 16, screws and screws are screwed, when setting the torque value in the drill position, holes are drilled. The instrument has three speed modes: position 1 – low speed; position 2 – average speed; position 3 – high speed. The tool comes in a plastic suitcase (case), together with a fast charger, battery, side handle, belt fastener, bat, packed in a cardboard box.

Technical specifications: overall dimensions (DhShV) 238x78x257 mm, cartridge diameter 13 mm, maximum torque: hard/soft puff 80/40 Nm, speed number 3, idling frequency: 1st speed 0-300 rpm, 2nd speed 0-600 rpm, 3rd speed 0-1700 rpm, maximum steel/wood drilling diameter of 13/65 mm rated voltage 18 V, Li-Ion battery type, 2x3.0 Ah battery capacity, net weight of 2.6 kg.

GRI 1 and 6

The battery drill screwdriver is a manual rotary action tool with a built-in electric brushless motor.

Full description

The tool is designed for drilling holes in various materials (metal, wood, plastic), as well as for screwing / unscrewing screws and screws. The tool consists of the following main elements: a plastic body, an electric motor, an aluminum reducer cover, a quick-clamp cartridge, a two-speed gearbox with metal gears, a torque adjustment ring, a clutch, a forward/reverse rotation switch, a speed change lever, a rubberized handle, double LED lights, a trigger switch on. Off. Drilling of materials is carried out through the head of the drill.

Screwing / unscrewing of screws and screws is carried out by means of a screwdriver nozzle. Adjustment of the torque of the tool is carried out by turning the adjustment ring. The torque is adjusted from minimum (position 1 on the adjustment scale) to maximum (position "drill" on the adjustment scale). When installed on the torque adjustment scale from 1 to 20, screws and screws are screwed, when setting the torque value in the drill position, holes are drilled. The tool has two speed modes: speed 1 - high torque at lower speed for high load work; speed 2 - low torque at high speed for low load work.

The tool comes in a cardboard box together with a belt fastener, bat. The battery pack is not included in the delivery package.

Technical characteristics: overall dimensions (DhShV) 150x81x232 mm, diameter of the cartridge 13 mm, maximum torque (hard/soft puff) 40/25 Nm, number of speeds - 2, idling frequency 1st speed 0-500 rpm, 2nd speed 0-1700 rpm, maximum diameter of drilling steel/wood 13/36 mm, power 410 W.

GRI 1 and 6

The battery drill screwdriver is a manual rotary action tool with a built-in electric brush motor.

Full description

The tool is designed for drilling holes in various materials (metal, wood, plastic), as well as for screwing / unscrewing screws and screws. The tool consists of the following main elements: plastic body, electric motor, quick-clamp cartridge, two-speed gearbox, torque adjustment ring, clutch, forward/reverse rotation switch, speed change lever, rubberized handle, LED backlight, trigger switch on. Off. Drilling of materials is carried out through the head of the drill. Screwing / unscrewing of screws and screws is carried out by means of a screwdriver nozzle.

The battery pack is not included in the delivery package.

Technical characteristics: overall dimensions (DhShV) 225x79x259 mm, cartridge diameter 13 mm, maximum torque hard / soft puff 91/58 Nm, number of speeds - 2, idling frequency 1st speed 0-400 rpm, 2nd speed 0-2000 rpm, maximum diameter of drilling steel / wood 13/76 mm, power supply voltage 18 V, net weight 2.3 kg.

GRI 1 and 6

Аккумуляторная дрель-шуруповерт является ручным инструментом вращательного действия со встроенным электрическим безщеточным двигателем.

Full description

Инструмент предназначен для сверления отверстий в различных материалах (металл, дерево, пластик), а также для завинчивания/отвинчивания винтов и шурупов. Инструмент состоит из следующих основных элементов: корпус из пластика, электрический двигатель, электрический тормоз, электронная регулировка оборотов, быстрозажимной патрон, двухскоростной редуктор с металлическими шестернями, кольцо регулировки крутящего момента, муфта, реверсивный переключатель вращения вперед/обратного вращения, рычаг изменения скорости, прорезиненная рукоятка, светодиодная подсветка, триггерный переключатель вкл./выкл.

Сверление материалов осуществляется посредством головки сверла. Завинчивание/отвинчивание винтов и шурупов осуществляется посредством насадки для отвертки. Регулировка крутящего момента инструмента осуществляется посредством поворота регулировочного кольца. Крутящий момент регулируется от минимального (положение 1 на шкале регулировки) до максимального (положение «сверло» на шкале регулировки). При установке на шкале регулировки значений крутящего момента от 1 до 21, осуществляется завинчивание винтов и шурупов, при установке значения крутящего момента в положение «сверло» осуществляется сверление отверстий.

Инструмент имеет два режима скорости: скорость 1 – высокий крутящий момент при меньшей скорости для работы с высокой нагрузкой; скорость 2 – низкий крутящий момент при высокой скорости для работ с малой нагрузкой. Инструмент поставляется в картонной коробке совместно с крепежом на пояс, битой. Блок аккумулятора в комплект поставки не входит.

Технические характеристики: габаритные размеры (ДхШхВ) 172х79х244 мм, диаметр патрона 13 мм, максимальный крутящий момент (твердая/мягкая затяжка) 54/30 Нм, число скоростей - 2, частота холостого хода 1-я скорость 0-500 об/мин., 2-я скорость 0-2000 об/мин., максимальный диаметр сверления сталь/дерево 133/38 мм.

GRI 1 and 6

The battery drill screwdriver is a manual rotary action tool with a built-in electric brushless motor.

Full description

The tool is designed for drilling holes in various materials (metal, wood, plastic), as well as for screwing / unscrewing screws and screws. The tool consists of the following main elements: plastic body, electric motor, quick-clamp cartridge, torque control ring, clutch, forward/reverse rotation switch, speed change lever, rubberized handle, LED lighting, trigger switch on. Off. Drilling of materials is carried out through the head of the drill. Screwing / unscrewing of screws and screws is carried out by means of a screwdriver nozzle.

The battery pack is not included in the delivery package.

Technical characteristics: overall dimensions (DhShV) 179x81x217 mm, cartridge diameter 1.5 - 13 mm, maximum torque 141 Nm, number of speeds - 2, 1st speed 0-550 rpm, 2nd speed 0-2100 rpm, maximum drilling diameter steel / wood 13/152 mm, power supply voltage 18 V, net weight 2.6 kg.

GRI 1 and 6

The battery drill screwdriver is a manual rotary action tool with a built-in electric brushless motor.

Full description

The tool is designed for drilling holes in various materials (metal, wood, plastic), as well as for screwing / unscrewing screws and screws. The tool consists of the following main elements: plastic body, electric motor, quick-clamp cartridge, torque control ring, electronic friction clutch, forward/reverse rotation switch, speed change lever, rubberized handle, LED backlight, trigger switch on. Off. The tool has two modes of operation: drill mode (only rotation), screwdriver mode (rotation with slipping of the clutch).

Drilling of materials is carried out through the head of the drill. Screwing / unscrewing of screws and screws is carried out by means of a screwdriver nozzle. The tool has two speed modes: speed 1 - high torque at lower speed for high load work; speed 2 - low torque at high speed for low load work. Adjustment of the torque of the tool is carried out by turning the adjustment ring. To adjust the tightening torque, 41 low speed positions and 21 high speed positions are provided. The tool comes in a cardboard box together with a depth limiter, a knob in the assembly, a hook, a bit holder, a bat.

Technical characteristics: overall dimensions (DhShV) 181x86x275 mm, diameter of the cartridge 13 mm, maximum torque: hard / soft puff 140/68 Nm, number of speeds - 2, 1st speed 0-650 rpm, 2nd speed 0-2600 rpm, maximum diameter of drilling steel / wood 20/76 mm, power 1000 W.

GRI 1 and 6

The battery drill screwdriver is a manual rotary action tool with a built-in electric brush motor.

Full description

The tool is designed for drilling holes in various materials (metal, wood, plastic), as well as for screwing / unscrewing screws and screws. The tool consists of the following main elements: plastic body, electric motor, electric brake, electronic speed control, two-speed gear gears, quick-clamp cartridge, torque control ring, clutch, trigger switch, speed change lever, rubberized handle. Drilling of materials is carried out through the head of the drill. Screwing / unscrewing of screws and screws is carried out by means of a screwdriver nozzle or a nest bit with a tail.

Adjustment of the torque of the tool is carried out by turning the adjustment ring. The torque is adjusted from minimum (position 1 on the adjustment scale) to maximum (position "drill" on the adjustment scale). When installed on the torque adjustment scale from 1 to 16, screws and screws are screwed, when setting the torque value in the drill position, holes are drilled. The tool has two speed modes: speed 1 - high torque at lower speed for high load work; speed 2 - low torque at high speed for low load work. The tool comes in a plastic case together with a charger, two batteries, bat, belt fastener.

Technical characteristics: overall dimensions (DhShV) 222x79x227 mm, diameter of the cartridge 13 mm, maximum torque hard/soft puff 42/27 Nm, idling frequency: 1/2 speed 0-400/0-1300 rpm, maximum drilling diameter steel/wood 13/36 mm, power voltage 18 V, battery type Li-Ion, battery capacity 2x1.5 Ah, net weight 2.0 kg.

GRI 1 and 6

The battery impact drill screwdriver is a hand tool with a built-in brushless electric motor.

Full description

The tool is designed to drill holes with impact action in brick and stone masonry. In the mode of normal (impactless) action, you can use the tool as a screwdriver, as well as drill wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic case, an electric motor, a quick-clamp cartridge, a trigger switch, a reverse switch lever, a speed change lever, an LED backlight, a ring of changing mode of operation. The tool provides three modes of operation: drill mode (only rotation), punch mode (rotation with impact), screwdriver mode (rotation with slipping the clutch).

Technical specifications: nominal voltage of 18 V DC, overall dimensions (DhShV) (without battery) 180x81x217 mm, drilling diameter (steel/brick) 13/16 mm drilling diameter (wood) screw drill/drill with automatic feed/ring saw 50/76/152 mm, diameter of quick-clamp cartridge 1.5 - 13 mm, maximum torque of 141 Nm, rotation speed without load (1/2 speed) 0-550/0- 2100 rpm, frequency of impacts (1/2 speed) 0-8250/0-31500 beats / min. The tool is packed in a cardboard box together with a side handle, belt fastener, depth limiter, bit 2 pieces.

The net weight is 2.7 kg. The battery pack is not included in the delivery package.

GRI 1 and 6

The battery shock drill screwdriver is a handheld tool with a built-in electric motor.

Full description

The tool is designed to drill holes with impact action in brick and stone masonry. In the mode of normal (impactless) action, you can use the tool as a screwdriver, as well as drill wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic body, an electric brush motor, a gearbox, a quick-clamp cartridge with a clutch, a trigger switch, a reverse switch lever, a speed change lever, a lamp, a change of mode ring, an adjustment ring. The tool provides three modes of operation: drill mode (only rotation), punch mode (rotation with impact), screwdriver mode (rotation with slipping of the clutch).

To select the mode of operation, the mark of the type of work (drill, hammer or screw), applied on the ring of changing the mode of operation, is combined with the arrow on the body of the tool. The torque of the tightening is adjusted by turning the adjustment ring (the minimum torque corresponds to position 1, the maximum - 20). To change the speed of operation, the speed lever is transferred to position 1 (for low revs) or position 2 (for high revs). Technical specifications: nominal voltage 10.8 - 12 V DC, overall dimensions (DhShV) 193x66x229 mm, drilling diameter (brick/steel/wood) 8/10/21 mm, maximum torque (soft/hard puff) 14/30 Nm, idling frequency (1/2 speed) 0-450/0-1700 rpm, impact frequency (1/2 speed) 0-6750/0-25500 beats/min.

The tool is packed in a cardboard box together with a bat and fastener on the belt. Battery unit and battery charging are not included in the package.

GRI 1 and 6

The battery shock drill screwdriver is a handheld tool with a built-in electric motor.

Full description

The tool is designed to drill holes with impact action in brick and stone masonry. In the mode of normal (impactless) action, you can use the tool as a screwdriver, as well as drill wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic body, an electric brush motor, a gearbox, a quick-clamp cartridge with a clutch, a trigger switch, a reverse switch lever, a speed change lever, a mode change ring, an adjustment ring. The tool provides three modes of operation: drill mode (only rotation), punch mode (rotation with impact), screwdriver mode (rotation with slipping of the clutch).

To select the mode of operation, the mark of the type of work (drill, hammer or screw), applied on the ring of changing the mode of operation, is combined with the arrow on the body of the tool. The torque of the tightening is adjusted by turning the adjustment ring (the minimum torque corresponds to position 1, the maximum - 16). To change the speed of operation, the speed lever is transferred to position 1 (for low revs) or position 2 (for high revs). Technical specifications: nominal voltage 14.4 V DC, overall dimensions (DhShV) 216x83x235 mm, drilling diameter (steel/wood/brick) 10/25/10 mm, maximum torque (hard/soft puff) 15/30 Nm, idling frequency (1/2 speed) 0-400/0-1400 rpm, impact frequency (1/2 speed) 0-6000/0-21000 beats/min.

The tool comes in a plastic case together with a charger (model, 14.4 B/18 B, 1.1 Ah), two batteries (lithium-ion, 14.4 V, capacity of 1.5 Ah) and a bat.

GRI 1 and 6

The three-mode battery perforator is an impact drill and is a hand tool with a built-in DC electric motor.

Full description

The tool is designed for percussion drilling and drilling of brick, concrete and stone, as well as for chiselling (treating). The tool is also suitable for non-impact drilling of wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic case, a brushless electric motor, a cartridge adapted for the SDS-PLUS tailing, a gearbox assembly, a spindle, a trigger switch, a reverse switch, a mode change handle, a handle. The choice of the mode of operation of the tool (“rotation with impact”, “rotation only” or “impact only”) is carried out by turning the handle of changing the mode of operation.

Technical characteristics: diameter of holes: concrete up to 28 mm, steel up to 13 mm, wood up to 32 mm, number of revolutions without load 0-980 rpm, frequency of impacts 0-5000 bpm, overall dimensions (DhShV) 389 x 102 x 232 mm, impact energy 2.8 J, nominal voltage 36 - 40 V DC, weight 4 kg. The tool is packed in a cardboard box together with a depth limiter and a replaceable fast-clamp cartridge. The battery pack is not included in the delivery package.

GRI 1 and 6

The three-mode battery perforator is an impact drill and is a hand tool with a built-in DC electric motor.

Full description

Technical characteristics: diameter of holes: concrete up to 28 mm, steel up to 13 mm, wood up to 32 mm, number of revolutions without load 0-980 rpm, frequency of impacts 0-5000 bpm, overall dimensions (DhShV) 458 x 101 x 234 mm, impact energy 3 J, nominal voltage 36 - 40 V DC, weight 3.8 kg. The tool is packed in a cardboard box together with a side handle, a depth limiter, a drill lubricant and a wipe. The battery pack is not included in the delivery package.

GRI 1 and 6

The three-mode battery perforator is an impact drill and is a hand tool with an integrated electric motor.

Full description

Technical characteristics: diameter of holes: concrete up to 20 mm, steel up to 13 mm, wood up to 26 mm, number of revolutions without load 0 - 1200 rpm, frequency of impacts 0-4000 bpm, overall dimensions (DhShV) 358 x 84 x 259 mm, impact energy 1.9 J, nominal voltage 18 V DC. The tool is packed in a cardboard box together with a depth limiter and a side handle. The battery unit and battery charger are not included in the package.

GRI 1 and 6

The three-mode battery perforator is an impact drill and is a hand tool with a built-in DC electric motor.

Full description

The tool is designed for percussion drilling and drilling of brick, concrete and stone, as well as for chiselling (treating). The tool is also suitable for non-impact drilling of wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic case, a brushless electric motor, a cartridge adapted for a tailing, a gearbox body assembled, a spindle, a trigger switch, a reverse switch, a mode change handle, a handle. The choice of the mode of operation of the tool (“rotation with impact”, “rotation only” or “impact only”) is carried out by turning the handle of changing the mode of operation.

Technical characteristics: diameter of holes: concrete up to 28 mm, steel up to 13 mm, wood up to 32 mm, number of revolutions without load 0-980 rpm, frequency of impacts 0-5000 beats. /min., overall dimensions (DhShV) 358 x 121 x 232 mm, impact energy 2.8 J, nominal voltage 36 - 40 V DC, weight 3.8 kg. The tool is packed in a cardboard box together with a depth limiter. The battery pack is not included in the delivery package.

GRI 1 and 6

The battery punch is a shock drill and is a hand tool with a built-in electric DC motor.

Full description

The tool is designed for percussion and ordinary drilling of brick, concrete and stone. The tool is also suitable for non-impact drilling of wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic case, a brushless electric motor, a cartridge adapted for a tailing, a gearbox assembly, a tool holder, a trigger switch, a reverse switch to change the direction of rotation, a mode change handle, a side handle, a depth meter. The tool has two modes of operation. The choice of the mode of operation of the tool (“impact drilling” or “drilling only”) is carried out by turning the handle of changing the mode of operation.

Technical characteristics: diameter of holes: concrete up to 17 mm, steel up to 10 mm, wood up to 13 mm, number of revolutions without load 0 - 680 rpm, frequency of impacts 0 - 4800 bpm, overall dimensions (DhShV) 273 x 86 x 211 mm, impact energy 1.2 J, nominal voltage 18 V DC. The tool is packed in a cardboard box together with a depth limiter and a side handle. The battery unit and battery charger are not included in the package.

GRI 1 and 6

The three-mode battery perforator is an impact drill and is a hand tool with a built-in DC electric motor.

Full description

The tool is designed for percussion drilling and drilling of brick, concrete and stone, as well as for chiselling (treating). The tool is also suitable for non-impact drilling of wood, metal, ceramics and plastic. The tool consists of the following main elements: a plastic case, a brushless electric motor, a cartridge adapted for a tailing, a gearbox body assembled, a spindle, a trigger switch, a reverse switch, a mode change handle, a handle. The choice of the mode of operation of the tool (“rotation with impact”, “rotation only” or “impact only”) is carried out by turning the handle of changing the mode of operation.

Technical characteristics: diameter of holes: concrete up to 28 mm, steel up to 13 mm, wood up to 32 mm, number of revolutions without load 0-980 rpm, frequency of impacts 0-5000 beats. /min., overall dimensions (DhShV) 358 x 102 x 232 mm, impact energy 2.8 J, nominal voltage 36 - 40 V DC, weight 3.9 kg. The tool is packed in a cardboard box along with a depth limiter of drilling, lubricant for drills and a napkin. The battery pack is not included in the delivery package.

GRI 1 and 6

What import requires

Veterinary and sanitary control

Goods fall under supervision by their type and characteristics

Sanitary and epidemiological supervision (control)
rule for the whole chapter 84
Материалы, оборудование, вещества, устройства, применяемые в сфере хозяйственно-питьевого водоснабжения и при очистке сточных вод, в плавательных бассейнах; Продукция машиностроения и приборостроения производственного, медицинского и бытового назначения, кроме запасных частей к транспортным средствам и бытовой технике (за исключением контактирующих с питьевой водой и пищевыми продуктами); Продукция, изделия, являющиеся источником ионизирующего излучения, в том числе генерирующего, а также изделия и продукция (товары), содержащие радиоактивные вещества; Строительное сырье и материалы, в которых гигиеническими нормативами регламентируется содержание радиоактивных веществ, в том числе производственные отходы для повторной переработки и использования в народном хозяйстве, лом черных и цветных металлов (металлолом); Оборудование, материалы для воздухоподготовки, воздухоочистки и фильтрации; Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры
Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

ТР ТС 010/2011Safety of machinery and equipment
- Оборудование гаражное для автотранспортных средств и прицепов — certificate of conformity (part of the heading)
- Инструмент механизированный, в том числе электрический (инструмент ручной) — certificate of conformity (part of the heading)
- Оборудование для вскрышных и очистных работ и крепления горных выработок: комбайны очистные; комплексы механизированные; крепи механизированные для лав; пневмоинструмент — certificate of conformity (part of the heading)
- Оборудование для бурения шпуров и скважин, оборудование для зарядки и забойки взрывных скважин: перфораторы пневматические (молотки бурильные); пневмоударники; станки для бурения скважин в горнорудной промышленности; установки бурильные — certificate of conformity (part of the heading)
- Оборудование и машины строительные — declaration of conformity or certificate of conformity (part of the heading)
ТР ЕАЭС 037/2016Restriction of the Use of Hazardous Substances in Electrical and Radio Electronics Products
- дрели, перфораторы, шуруповерты, гайковерты, отвертки — declaration of conformity
- инструмент ручной аккумуляторный (с зарядным устройством) — declaration of conformity
ТР ЕАЭС 043/2017About requirements to means of ensuring fire safety and fire extinguishing
- Инструмент для проведения специальных работ на пожарах (предназначенный для применения в качестве средств обеспечения пожарной безопасности и пожаротушения) — declaration of conformity
ТР ТС 020/2011Electromagnetic compatibility of technical means
- дрели, перфораторы, шуруповерты, гайковерты, отвертки — certificate of conformity

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

How it is done in practice

Valid documents in the EAEU unified register for subheading 8467 21: certificates 3,978, declarations 2,344.

By technical regulation: ТР ТС 020/20113,959ТР ТС 010/20113,939ТР ЕАЭС 037/20162,062ТР ТС 004/20112,031ТР ТС 012/20112
Schemes: 3с2,6451д1,8841с1,1654д3032д82The letter after the scheme number shows the form: certification or declaration of conformity.
Most active certification bodies: ТОО «Научно-технический центр электромагнитной совместимости и безопасности информационных систем»ООО «Гильдия Качества»ООО «ВИПТЕСТ»
Manufacturers outside the EAEU: China1,120Germany73United States23Hong Kong SAR China20Türkiye19Taiwan19

Manufacturers of these goods →Check a supplier’s document by its number →

Payments on import

Duty for this code: 8.5%. On top of the duty, on import into Russia you pay VAT of 22% of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

Import VAT in EAEU countries

Russia22%Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025)
Kazakhstan16%Tax Code of Kazakhstan, Art. 503(1), from 01.01.2026
Belarus20%Tax Code of Belarus, Art. 122
Armenia20%Tax Code of the Republic of Armenia
Kyrgyzstan12%Tax Code of the Kyrgyz Republic

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

Calculate the whole deal →Quick payment estimate →

OKPD2 code

The match is set for the whole subheading, by the first six digits of the code

28.24.11 — Инструменты ручные электрические

Correspondence keys of the Russian Ministry of Economic Development, edition of 20.07.2023. The ministry’s caveat: Ключи отражают возможные соответствия между кодами на уровне первых шести знаков ТН ВЭД ЕАЭС (основанной на ГС) и кодами ОКПД 2 (основанного на КПЕС) по состоянию на 1 января 2022 года. Предлагаемые соответствия не являются исчерпывающими и предназначены для использования в качестве вспомогательного материала для облегчения работы по установлению возможных вариантов корреляции кодов классификаторов в отношении соответствующих категорий товаров.

Настоящие переходные ключи (сопоставительные таблицы) разработаны на основе данных агентства Евростат Комиссии Европейского союза по корреляции кодов Гармонизированной системы описания и кодирования товаров (ГС) 2022 года и Статистической классификации продукции по видам экономической деятельности в Европейском союзе (КПЕС) 2008 года. Ключи отражают возможные соответствия между кодами на уровне первых шести знаков ТН ВЭД ЕАЭС (основанной на ГС) и кодами ОКПД 2 (основанного на КПЕС) по состоянию на 1 января 2022 года. Предлагаемые соответствия не являются исчерпывающими и предназначены для использования в качестве вспомогательного материала для облегчения работы по установлению возможных вариантов корреляции кодов классификаторов в отношении соответствующих категорий товаров. Услуги не являются объектом классификации в ТН ВЭД ЕАЭС и не включены в переходные ключи. По мере внесения изменений в ОКПД 2 и ТН ВЭД ЕАЭС переходные ключи при необходимости подлежат актуализации.

The right code is in the HS code search.