EAEU HS code

8467 29 200 0 — Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor: with self-contained electric motor: other: capable of operation without an external source of power

Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor: with self-contained electric motor: other: capable of operation without an external source of power

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

Duty rate

10%

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit

шт

Item

Requirements and measures

Veterinary and sanitary control1
Conformity assessment18

None: russian bans and restrictions, dual use, EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT

22%

The general import rate in Russia: Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025). This code is not named on the 10% VAT list (Decree No. 908) or the exemption list (No. 1042). The list of medical goods No. 688 is not checked here.

Where it sits in the nomenclature

Section XVI. Machinery and mechanical appliances; electrical equipment; parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles

84Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
8467Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor; parts thereof
8467 29Electromechanical tools for working in the hand, with self-contained electric motor (excl. saws and drills)
8467 29 20With self-contained electric motor: other: capable of operation without an external source of power
8467 29 200 0you are here

Explanatory notes to heading 8467 4 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

8467 Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor: – Pneumatic: 8467 11 – – Rotary type (including combined rotary-percussion) 8467 19 – – Other – With self-contained electric motor: 8467 21 – – Drills of all kinds 8467 22 – – Saws 8467 29 – – Other – Other tools: 8467 81 – – Chain saws 8467 89 – – Other – Parts: 8467 91 – – Of chain saws 8467 92 – – Of pneumatic tools 8467 99 – – Other

This heading covers tools comprising an electric motor, a compressed air engine (or a compressed air piston), an internal combustion engine or any other engine (e.g. a small hydraulic turbine); an engine powered by compressed air (a) is normally powered by an external source of compressed air, and in the case of an internal combustion engine, the batteries of the ignition system are sometimes located separately. In pneumatic instruments, the action of compressed air is sometimes supplemented by hydraulic connections. These instruments are classified in this heading only if they are hand tools. The expression "hand tools" means tools that are designed to be held in the hand during use, as well as heavier tools (such as tamping to seal the ground), which are portable, that is, can be lifted and manually carried by the operator m, especially in the process of performing work, and which are also designed to control and direct the movement of the hand during operation. To prevent fatigue during operation caused by exposure to their full weight, such tools can be used with auxiliary support devices (for example, tripods, jack racks, suspended lifting waist). However, some hand tools of this heading have devices enabling them to be temporarily fixed on the pole. When presented together with a support, such instruments are classified in this heading provided that they are in fact “hand tools” as defined above. Some instruments falling under this heading may be equipped with additional devices (e.g. a fan and a dust collector for the removal and collection of dust during operation). This heading does not include tools which, because of their mass, size, etc., are obviously not capable of being held by hand as described above. It also excludes tools (portable or non-portable) equipped with a support plate or other device for fastening on a wall, workbench, floor, etc., tools that are equipped with devices for moving on rails (for example, machines for cutting grooves in railway sleepers or drilling them), and machines moved and controlled from behind by a walking operator, or similar machines on wheels operated by hand, for example, machines for grinding floors made of concrete, marble or wood, etc. In addition, this heading does not include kits consisting of a fixture for securing a working tool with one or more working tools and a separate spark-ignition internal combustion piston engine or a separate electric motor with a flexible drive shaft; a fixture for securing a working tool is classified in heading 8466, an engine with a flexible drive shaft is classified in heading 8407 or 8501, as the case may be, and the working tools are classified in the relevant headings. The instruments of this heading include tools for the processing of various materials and are used in various branches of industry. If the above conditions are met, this heading covers, inter alia: (1) Machines for drilling, cutting threads with a meter or opening openings. (2) Drilling machines, drill hammers and the like. (3) Wrenches, screwdrivers, nuts. (4) Devices for planing, adjustment to a certain size, edges of the plane or similar devices.

(5) Sewing machines, grinding machines using abrasive stones, skins, polishing machines and the like. (6) Machines with wire brushes. (7) Circular saws, chain saws and the like. (8) Various types of hammers, e.g. cutting hammers, scale upholstery hammers, minting hammers, riveting hammers, concrete crushers. (9) Sealing type rivet hammers; rivet cutting devices and other collapsing devices. (10) Sheets for metal sheet (scissor or matrix type). (11) Tampering of molding mixture, rod knocking tool for removing rods from castings, vibrators for casting forms. (12) Tampering for soil compaction in the construction or repair of roads. (13) Automatic shovels. (14) Vibrators for concrete, facilitating its movement and laying. (15) Machines for cutting hedges. (16) Devices for removing scale from boilers having a hydraulic actuator. (17) Compressed-air lubricating pistols for garages, etc. (18) Portable machines for processing lawns, cutting grass, for example, in corners, along walls, curbs, under bushes. Such machines have a built-in motor in a light metal frame and a cutting device, usually consisting of a thin nylon thread. (19) Portable shrubs with built-in motor, drive shaft (rigid or flexible) and working tool holder, presented together with various interchangeable cutting tools, for installation in the holder of the working tool. (20) Cutting materials used in the textile industry. (21) Engraving tools. (22) Manual electric scissors, consisting of a fixed cutting blade and a movable cutting blade operated by an integrated electric motor, used in a clothing workshop, hat workshops, households, etc. PARTS Subject to the general provisions relating to the classification of parts (see the general provisions of Section XVI), this heading also includes parts (other than fixtures for securing the working tool of heading 8466) of the instruments of this heading. This heading also does not cover: (a) grinding, sharpening, polishing, cutting circles and anilological articles of stone, ceramics or agglomerated abrasives (heading 6804); (b) instruments of Chapter 82; (c) air compressors (heading 8414);

(d) appliances for spraying or atomising liquids or powders, hand-operated sprayers, sand blasting machines and similar appliances (heading 8424); (e) electric lawn mowers (heading 8433); (f) electro-mechanical domestic appliances (heading 8509); (g) electric shavers, hair clippers and hair-removing appliances of heading 8510; (h) electro-mechanical hand tools for medical or dental use (heading 9018).

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 84 — Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof 24 items

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) millstones, grinding stones or other articles of Chapter 68;

(b) equipment or devices (e.g. pumps) of ceramic materials and ceramic parts of machinery or devices of any material (Chapter 69);

(c) laboratory glassware (heading 7017); equipment, devices or other articles for technical purposes or parts thereof of glass (heading 7019 or 7020);

(d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81);

(e) vacuum cleaners of heading 8508;

(f) electromechanical household appliances of heading 8509; digital cameras of heading 8525;

(g) radiators for articles of Section XVII; or

(h) manual mechanical brushes for floor cleaning, without engine (heading 9603).

2. Subject to the provisions of Note 3 to Section XVI and Note 11 to this Chapter, a machine or device which meets the description in one or more of headings 8401 to 8424 or heading 8486 and at the same time the description in one or more headings 8425 to 8480 is included in the relevant heading of the first series of headings or in heading 8486 as the case may be, and not in the second series.

(A) However, heading 8419 does not cover:

(i) seed germination equipment, incubators or brooders (heading 8436);

(ii) machinery for wetting grains (heading 8437);

(iii) diffusion apparatus for the extraction of sugary juice (heading 8438);

(iv) equipment for the heat treatment of textile yarn, textile materials or finished textile articles (heading 8451); or

machining equipment, assemblies or laboratory equipment in which temperature change, even if necessary, is an auxiliary process.

(B) Heading 8422 does not cover:

(i) sewing machines for sewing bags or similar packagings (heading 8452); or

(ii) office equipment of heading 8472.

(i) paint-blasting printing presses (heading 8443); or

(ii) water jet cutting machines (heading 8456).

3. A machine for processing any material which corresponds to the description of heading 8456 and simultaneously to the description of heading 8457 to 8461, 8464 or 8465 is classified in heading 8456.

4. Heading 8457 covers only metalworking machines other than lathes (including multipurpose lathes) which may perform different types of machining operations by:

(a) the automatic replacement of tools from a tool store or similar device in accordance with the processing program(s);

(b) the automatic application simultaneously or sequentially of different processing heads operating at a fixed workpiece (assembly single-position machines); or

5. For the purposes of heading 8462, the term “longitudinal cutting line” for flat products means a process line consisting of a winder, a correct device, a longitudinal cutting device and a winder. The term “cross-cutting line” for flat products means a process line consisting of a unwinder, a correct device and a cutting device.

6. (A) For the purposes of heading 8471, the term “computers” means machines capable of:

(i) store the processing program or programs and at least the information currently necessary to execute the program;

(ii) be freely reprogrammable according to user requirements;

(iii) perform user-defined arithmetic calculations; and

(iv) perform, without human intervention, a processing program requiring the computer to modify its actions by making logical decisions during processing.

(B) Computing machines can be made in the form of systems consisting of a different number of individual blocks.

(C) Subject to the provisions of Notes (D) and (E) below, a block shall be treated as part of a computing system if it satisfies all of the following conditions:

(i) exclusively or principally used in a computing system;

(ii) is capable of being connected to the central processing unit either directly or through one or more other units; and

(iii) is capable of receiving or presenting information in such form (codes or signals) as may be used by the system.

Separately presented computer units are classified in heading 8471.

However, keyboards, X-Y-coordinate input devices and disk storage units which satisfy the conditions laid down in Notes (B) (ii) and (B) (iii) above are in all cases to be regarded as blocks of heading 8471.

(D) Heading 8471 does not cover the following devices, presented separately, even if they meet all the conditions of Note 6(C) above:

(i) printers, copiers, facsimile machines, combined or not;

(ii) apparatus for receiving or transmitting voice, images or other data, including apparatus for providing communications over a wired or wireless communication network (for example, on a local or wide area network);

(iii) loudspeakers and microphones;

(iv) television cameras, digital cameras and video recording cameras;

(v) monitors and projectors not combined with television reception equipment.

(E) Machines containing or working in conjunction with a computer and performing specific functions other than information processing are classified in the headings according to their specific functions or, if this is not possible, in the residual headings.

7. Heading 8482, inter alia, covers polished steel balls whose maximum and minimum diameter does not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is smaller. Other steel balls are classified in heading 7326.

8. A machine which is used for more than one purpose shall be classified as if its primary purpose were the only one.

Subject to the provisions of Note 2 to this Chapter and Note 3 to Section XVI, a machine whose primary purpose is not described in any heading or a machine in which none of its functions is primary is classified in heading 8479, unless the context otherwise provides. Heading 8479 also includes machinery for the manufacture of ropes or ropes (e.g. knitting machines) from metal wire, textile yarn or other materials or from a combination of such materials.

9. For the purposes of heading 8470, the term “pocket” applies only to devices not exceeding 170 x 100 x 45 mm.

10. For the purposes of heading 8485, the term additive manufacturing (also referred to as 3D printing) means the formation of physical objects based on a digital model by successively adding and layering, sealing and curing a material (e.g., metal, plastics or ceramics).

Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machines as described in heading 8485 are classified in that heading and no other heading of the Nomenclature.

11. (A) Notes 12(a) and 12(b) to Chapter 85 also apply to the terms “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this note and in heading 8486. However, in this note and in heading 8486, the term "semiconductor devices" also applies to photosensitive semiconductor devices and LEDs.

(B) In this note and in heading 8486, the term “plane display panel production” covers the fabrication of a flat panel of substrates. It does not cover the production of glass or the installation of printed circuit boards or other electronic components on flat panels. The term "flat display panel" does not apply to cathode ray tube technology.

(i) producing or eliminating defects in masks and patterns;

assemblies of semiconductor devices or electronic integrated circuits;

(iii) lifting, manipulating, loading or unloading boules, plates, semiconductor devices, electronic integrated circuits and flat display panels.

(D) Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machinery meeting the description in heading 8486 is classified in this heading and in no other heading of the Nomenclature.

Subheading notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. For the purposes of subheading 8465 20, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.

2. For the purposes of subheading 8471 49, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).

3. For the purposes of subheading 8481 20, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481.

4. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.

Additional notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheadings 8407 10 and 8409 10, the term “aviation engines” shall apply only to engines intended for assembly with an air or rotor.

2. В подсубпозицию 8471 70 300 0 также включаются устройства считывания компакт-дисков, являющиеся запоминающими устройствами вычислительных машин, которые предназначены для считывания сигналов с CD-ROM, аудиокомпакт-дисков и фотокомпакт-дисков и снабжены разъемом для наушников, регулятором громкости или кнопкой пуск/стоп.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheading 8482 10 900 1, the term “gross mass” means the total mass of the goods with all kinds of packaging materials and packagings ensuring their safety during storage and transport. The total weight of the goods does not include the mass of packaging materials or containers that are clearly suitable for reuse.

2. For the purposes of subheading 8415 81 001 0, the term “special production facilities” means premises in which the maintenance of precise values of temperature and humidity is due to the operational requirements of the equipment installed therein, such as machines, computers, switching equipment, surgical equipment, etc., or to the operations performed therein.

3. In subheadings 8427 20 190 1, 8427 90 000 1 and 8436 80 100 1, the date of manufacture shall be determined on the basis of the technical documentation of the manufacturer (technical passport, instruction manual) and the manufacturer's plate, which shall be fixed in a conspicuous, easily accessible place of the machinery and shall not be replaced during operation. If the manufacturer's technical documentation and the manufacturer's plate contain conflicting information about the date of manufacture or there is no information about the manufacturer of the equipment on the date of manufacture, then this technique is considered a technique, since the release of which more than 3 years have passed.

If the manufacturer's information indicates only the year of manufacture, then the date of manufacture of the equipment is considered 1 July of the year of manufacture; if the month and year of manufacture are indicated, the date of manufacture is the 15th day of the month specified in the manufacturer's information.

4. For the purpose of classification of goods in subheading 8482 10 900 1 in the states, whose territories constitute the customs territory of the Eurasian Economic Union, when applying the term "French border of the country of importation", the country of import is understood as the customs territory of the Eurasian Economic Union.

5. For the purpose of subheading 8407 10 000 3, the term “take-off power” means the maximum power developed by an aircraft piston engine.

“Take-off power” is specified in the technical documentation and (or) accompanying documents, measured in kilowatts or horsepower (1 kW corresponds to 1.35962 hp).

6. В подсубпозиции 8421 99 000 5 термин «элементы мембранные рулонного типа для фильтрования или очистки жидкостей» означает устройства цилиндрической формы, состоящие из:

- internal plastic perforated tube on which spirally wound membrane bags;

- drainage material located between membrane bags and glued to them on three sides.

The membrane package consists of a twice folded band of membrane containing an extruded grid inside.

At the ends of the membrane roll-type element, fixing discs and sealing cuffs can be installed.

7. For the purposes of subheading 8415 20 000 2, the term “in a single enclosure” refers to air conditioning units (air conditioners) in which all the elements are combined in a single enclosure, frame or platform.

The term "in a single housing" also applies to air conditioning units (air conditioners) in which the refrigeration compressor, which is part of a given air conditioning unit (air conditioner), is located separately, that is, not combined with the rest of the elements in one housing, on one frame or on one platform.

Classification rulings for this code (38)

Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.

The battery corner grinder is a manual tool with a built-in brushless electric motor, with battery power (not included in the supply).

Full description

The tool is designed for grinding, stripping and cutting materials from metals and stone without using water. Structurally consists of the following main elements: body; built-in electric motor; spindle; bearings; gearbox; spiral conical gear; sealing rings; disc casing; tool start/stop switch; side handle for ease of use. A grinding disc can be installed on the tool, as well as a cup wire brush (the brush is not included in the supply). An electric motor converts the DC electrical energy into the mechanical energy of the disc/brush rotational motion.

When working, the operator turns on the tool and presses the disk to the processed part.

Technical characteristics: supply voltage -36-40 V DC; idling frequency 3000-8500 rpm; disc diameter - 125 mm Overall dimensions (D x Sh x V): 413 x 140 x 156 mm, weight without battery - 3.0 kg. Included with the goods are: protective casing, side handle, key, disk. The goods are delivered in a cardboard box.

GRI 1 and 6

The manual tool with a built-in brush electric motor, with electricity from the 18 V DC battery unit (not included in the supply) is designed for grinding, stripping (including a wire brush), cutting holes and cutting materials from metals and stone without using water.

Full description

Structurally consists of the following main elements: rubberized ergonomic housing; built-in electric motor; spindle; bearing box; coal brush, which provides the transfer of current to the rotor of the electric motor of the tool; gearbox; spiral conical gear; sealing rings; disc casing; switch to start/stop tool; controller; indicator lamp; side handle for ease of use. Depending on the requirements of the user, a grinding disc can be installed on the tool, as well as a cup wire brush or a head for cutting holes (not included in the supply).

The electric motor converts the electrical energy of direct current into the mechanical energy of the rotational motion of the disc, brush, etc.

Technical characteristics: supply voltage -18 In direct current; idling frequency - 10000 rpm; disc diameter - 115 mm; sound pressure level - 79 dB(A); maximum spindle length - 23 mm.

Overall dimensions (D x Sh x B): 317 x 129 x 126 mm. The goods are delivered in a cardboard box. Included with the goods are: protective casing, side handle, grinding disc, key.

GRI 1 and 6

The manual tool with a built-in electric motor, with electricity from the 18V DC battery unit (not included in the supply) is designed for grinding, stripping (including a wire brush), cutting holes and cutting materials from metals and stone without using water.

Full description

Structurally consists of the following main elements: body, built-in brushless electric motor (BL-motor), bearing box, spindle, disc casing, slider switch with locking function, sensor on ADT technology (automatic speed and torque control), battery charge level sensor, removable dust cover, side handle for ease of use. Depending on the requirements of the user, a grinding disc can be installed on the tool, as well as a cup wire brush or a head for cutting holes (not included in the supply). The electric motor converts the electrical energy of direct current into the mechanical energy of the rotational motion of the disc, brush, etc.

The tool provides automatic shutdown functions for sudden recoil or disk stop (AFT technology), protection with increased resistance to dust, debris (XPT technology), protection from accidental start-up, as well as smooth start-up.

Technical characteristics: power supply voltage -18 In direct current; idle frequency - 8500 rpm; disc diameter - 125 mm; sound pressure level - 82 dB(A); sound power level - 90 dB(A); maximum spindle length -23 mm.

Overall dimensions (D x Sh x B): 362 x 140 x 145 mm. The goods are delivered in a cardboard box. Included with the goods are: protective casing, side handle, grinding disc, key.

GRI 1 and 6

Set for craftsmen in individual packaging for retail sale is a hand tool with built-in electric motor, able to work without an external power source, used mainly in tattoo parlors.

Full description

The set consists of the following main components: a rotary car - 1 pc; a power supply - 1 pc; cartridges - 20 pcs; transfer paper - 2 pcs; a mixer for mixing paint with nozzles - 1 pc; color pigments - 10 pcs.

The principle of operation: a cartridge with a needle is installed in the rotary tattoo machine, after which the master moves the machine over the human skin and applies permanent drawings by introducing pigment.

GRI 3(b) and 6

The longitudinal battery screwdriver is a manual rotary action tool with an integrated electric brush motor.

Full description

The tool is designed to screw screws into wood. Thanks to the switch, screws can be twisted. To turn on the tool, you need to press on the side A for rotation clockwise, on the side B for rotation counterclockwise. The tool consists of the following main elements: plastic housing, electric motor, gearbox, built-in lithium battery, handle in the forward and pistol position, magnetic bit holder, LED backlight of the working area, switch on. Off. The tool can be used in two ways: in direct form and in the form of a pistol, in accordance with the conditions of the place of work and the required operation.

Screwing screws is carried out by bit. The bit is inserted into the magnetic holder. The screw is placed on the tip of the bit and is brought to the surface of the processed part, which must be fixed. Then the operator presses the instrument and launches it. When the screw heads are equal to the surface being treated, the operator removes the tool and releases the switch. The tool comes in a plastic case together with a charger, USB cord, a set of bits (81 pieces).

Technical characteristics: overall dimensions (DhShV): in direct form 287x47x51 mm, in the form of a pistol 205x47x51 mm, the size of the fastener: screw Ø 3.8x32 mm, maximum torque 6 Nm, idling frequency 220 rpm, built-in battery capacity 1.5 Ah, power voltage 3.6 V, net weight 0.36 kg.

GRI 1 and 6

The manual tool with a built-in electric brushless engine, with electricity from a battery unit of 18 V DC (not included in the supply) is designed for mowing grass and small weeds.

Full description

Structurally consists of the following main elements: electric motor mounted in the body; barbells; locking sleeve; cutting (trimmer) head; unlock lever; trigger switch; speed indicator; automatic speed regulator indicator (depending on the load); power indicator; main power buttons; reverse buttons (to remove winding grass); handle; protective device (fence of the cutting assembly); protection holder; battery unit. The engine installed in the body is located in the lower part of the rod, in the upper part of the rod there is a battery block.

The torque is transmitted from the engine rotor to the spindle shaft through the gears on the rotor and spindle. A trimmer head is fastened to the spindle, consisting of a body with guides for the cord, lid, an inner bobbin with a wound trimmer of two threaded nylon cord (seal) and an impact self-release mechanism. The supply of a portion of the cord from the trimmer head is carried out due to a light impact of the trimmer head on the ground. Use, holding the tool in your hand, turns it on and moves it to the right and left, while cutting grass, weeds with the tip of the nylon cord.

Technical characteristics: supply voltage - 18 V DC; diameter of nylon cord -2.0 ÷ 2.4 mm; output power - 240 W; diameter of mowing - 300 mm. Weight: 2.8 kg.

The goods are packed in a box with identification information. Complete with the goods follow: semi-automatic trimmer head with a mounted cord, belt tooling for one shoulder, hexagon, bag for storing consumables in the form of a soft bag of synthetic fabric with a screed lace on top of the neck.

GRI 1 and 6

The manual tool with a built-in electric brushless engine, with electricity from a 36 V DC battery block (not included in the supply) is designed for mowing grass, weeds, pruning bushes and growths.

Full description

Structurally consists of the following main elements: electric motor mounted in the body; barbells; cutting trimmer head; unlock lever; trigger switch; speed indicators, power and automatic rotational frequency switching system; main power buttons, reverse (to remove winding grass); handles; protective device extension protective device (for nylon cutting head / plastic knife); fence; battery block. The engine installed in the body is located in the lower part of the bar, in the upper part of the bar there is a battery block.

The torque is transmitted from the engine rotor to the spindle shaft through the gears on the rotor and spindle. A trimmer head is attached to the spindle. The trimmer head consists of the following main components: body; cover; cutting elements - an internal reel with a wound trimmer two thread nylon cord (seal) or 3 plastic knives with teeth. Also as a cutting element can be installed two-bladed knife for grass with a diameter of 255 mm. The supply of a portion of the cord from the trimmer head is carried out due to a light impact of the head on the ground.

Use, holding the tool in your hand, turns it on and moves it to the right and left, cutting with the tip of a nylon cord, plastic knives, etc. grass, weeds. Technical specifications: supply voltage - 36 V DC; nylon cord diameter -2.0 ÷ 2.4 mm; power output - 1000 W; mowing diameter: 350 mm (when using cord)/230 mm (when using plastic knives)/255 mm (when using a two-blade knife). Weight: 5.3 kg.

The goods are packed in a box with identification information. Complete with the goods are: semi-automatic trimmer head with a nylon cord; trimmer head with plastic knives; a two-blade grass knife; belt tooling for one shoulder; combined key; bag of synthetic fabric for storing consumables with a screed lace on top of the neck.

GRI 1 and 6

The manual tool with a built-in electric brushless engine, with electricity from a 36 V DC battery block (not included in the supply) is designed for mowing grass, weeds, pruning bushes and growths.

Full description

Structurally consists of the following main elements: electric motor mounted in the body; straight-type barbells; cutting trimmer head; unlock lever; trigger switch; speed indicators, power and automatic rotational frequency switching system; main power buttons, reverse (to remove wound grass); loop-like handle; protective devices, one of which is designed for the cutting element, the other for the nylon cutting head / plastic knife; battery block. The engine installed in the body is located in the lower part of the bar, in the upper part of the bar there is a battery block.

The torque is transmitted from the engine rotor to the spindle shaft through the gears on the rotor and spindle. A trimmer head is attached to the spindle. The trimmer head consists of the following main components: body; cover; cutting elements - an internal reel with a wound trimmer two thread nylon cord (seal) or 3 plastic knives with teeth. Also as a cutting element can be installed four-bladed knife for grass with a diameter of 255 mm. The supply of a portion of the cord from the trimmer head is carried out due to a light impact of the head on the ground.

Use, holding the tool in your hand, turns it on and moves it to the right and left, cutting with the tip of a nylon cord, plastic knives, etc. grass, weeds.

Technical characteristics: supply voltage - 36 V DC; nylon cord diameter -2.0 ÷ 2.4 mm; power output - 550 W; mowing diameter: 300 mm (when using cord)/230 mm (when using plastic knives)/255 mm (when using a four-blade knife). Weight: 3.5 kg.

The goods are packed in a box with identification information. Complete with the goods follow: semi-automatic trimmer head with a nylon cord; trimmer head with plastic knives; knife for grass four-blade; belt tooling on one shoulder; combined key; universal casing for working with a cord (seal) or knife; bag for storing consumables with a screed lace on top of the neck.

GRI 1 and 6

Battery grass scissors are a hand tool with a built-in electric brush motor.

Full description

The tool is designed to prune the edges of lawns or branches of shrub and trim the hedge. It consists of the following main components: plastic body, electric motor, gearbox, controller, crank, guide plate, clamp lever, trigger switch, knife cloths (blades). The electric motor converts the electrical energy of direct current into the mechanical energy of the reciprocal movement of the blades. When working, the operator turns on the tool, holds it so that the lower part rests on the ground and then smoothly moves the tool forward.

The power of the scissors is made from a built-in electric battery (not included in the package).

Technical characteristics: supply voltage - 18 volts, maximum length of knives - 20 cm, engine speed without load - 1250 rpm.

Overall dimensions: 353 x 177 x 131 mm. Weight - 1.8 kg with battery. The package with a saw includes: a knife for grass, a container for grass, a case for a knife.

The goods are packed in a cardboard box.

GRI 1 and 6

Hycovert is a hand tool with a built-in electric motor, with a battery power source.

Full description

Hycovert is designed to unscrew and twist bolts and nuts. The tool consists of the following main elements: plastic body, electric brush motor, gearbox, ratchet head, trigger switch, reverse switch to change the direction of rotation, lamp. Before starting work, the end head corresponding to the size of the screwed nut is put on the drive of the square (heads are not included in the delivery kit). Holding the tool firmly, the operator puts the end head on the bolt / nut. Then the operator turns on the tool and makes a puff.

When the bolt/nut is fully tightened, the tool will automatically stop. Technical specifications: maximum torque - 47.5 N m; idling frequency: 0-800 rpm; nominal voltage - 18 V DC; dimensions - 350 x 79 x 67 mm; weight - 1.2-1.6 kg.

The package includes a drive square of 3/8 inches and 1/4 inches. Hycovert comes without batteries and charger. The goods are delivered in a cardboard box.

GRI 1 and 6

The battery corner grinder is a manual tool with a built-in brushless electric motor, with battery power (not included in the supply).

Full description

When working, the operator turns on the tool and presses the disk to the processed part.

Technical characteristics: supply voltage - 36-40 In direct current; idling frequency - 8500 rpm; disc diameter - 125 mm.

Overall dimensions (D x Sh x V): 398 x 140 x 156 mm, weight without battery - 3.0 kg. Included with the goods are: protective casing, side handle, key, disk. The goods are delivered in a cardboard box.

GRI 1 and 6

The battery corner grinder is a manual tool with a built-in brushless electric motor, with battery power (not included in the supply).

Full description

When working, the operator turns on the tool and presses the disk to the processed part.

Technical characteristics: supply voltage - 36-40 In direct current; idling frequency 8500 rpm; disc diameter - 150 mm.

Overall dimensions (D x Sh x V): 398 x 171 x 156 mm, weight without battery - 3.0 kg. Included with the goods are: protective casing, side handle, key, disk. The goods are delivered in a cardboard box.

GRI 1 and 6

The lawn mower is a hand tool with a built-in electric brushless DC motor.

Full description

The tool is designed to mow grass and small weeds. The tool consists of the following main elements: electric motor, trigger switch, tube (bar), handle, front handle, fencing, cutting assembly cover, ball bearings, engine body, protective cover, gear shaft, spoole with fishing line. The electric motor of the lawn mower is powered by a battery (not included in the package). The torque from the electric motor through the gear shaft is transmitted to a spoole, which is equipped with a cutting tool - a nylon fishing line.

The operator turns on the lawnmower and cuts the grass with the tip of a nylon line, moving the lawnmower to the right and left, slowly moving forward, holding the tool on his hands at an angle of 30 ° relative to the surface.

Technical characteristics: supply voltage 18 V DC, diameter of nylon line - 1.65 mm, output power 230 W, cutting diameter - 260 mm, speed of rotation without load - 7800 rpm, dimensions (DhShV): 1229-1433 x 267 x 257 mm, weight 2.6 kg Lawn mower packed in a cardboard box together with a semi-automatic trimmer head, belt fitting on one shoulder and trimmer cord 1.65 mm x 15 m.

GRI 1 and 6

The battery rivet gun is a hand tool with a built-in brushless DC electric motor.

Full description

The tool is designed to install deaf rivets. The tool consists of the following main elements: plastic housing with a DC motor, clamping cartridge, vise, pusher, compression spring, electronic board, switching unit, container for rivet rods, gear wheels, gearbox. The rotational moment of the electric motor by means of gears and gearbox is converted into the translational movement of the pusher.

Technical characteristics: supply voltage 18 V, traction force 10 kN, stroke piston 25 mm, total length 313 mm, weight 1.9 kg, rivet diameter 2.4/3.2/4.0/4.8 mm. The battery rivet gun is packed in a cardboard box together with a hook for mounting on the belt, lubricant and a set of parts for installing rivets of different diameters. Battery and battery charging are not included in the package.

GRI 1 and 6

The battery vibrator is a hand tool with a built-in DC electric motor.

Full description

The tool is designed to seal concrete mixtures, as well as to remove air bubbles from concrete mixtures during their laying. The tool consists of the following main elements: a plastic housing with a DC motor, an eccentric shaft, a flexible drive shaft, a flexible hose, bearings. Consolidation of concrete and removal of air bubbles occurs due to mechanical vibrations that create the working organ of the tool (vibrobula), immersed in the concrete mixture.

Technical characteristics: dimensions 1438x93x250 mm, nominal voltage 18V DC, length of flexible shaft 1200 mm, vibration frequency of vibrobulava 13000 rpm, diameter of vibrobulava 25 mm, weight 3.3 kg. The battery vibrator is packed in a cardboard box. Battery and battery charging are not included in the package.

GRI 1 and 6

The battery pin pistol is a hand tool with a built-in DC electric motor.

Full description

The tool is designed to fasten parts from soft wood with pins (nails). The tool consists of the following main elements: a plastic case with a DC motor, a guide bolt, springs, a hammer, a shock absorber, gears, levers.

Technical characteristics: dimensions of 257x94x228 mm, nominal voltage of 18 V DC, pins of length 15, 20, 25, 30, 35 mm, pin diameter 1.05 mm, store capacity - 100 pcs, weight 2.1 kg are used. The battery pin pistol is packed in a cardboard box along with a hook for mounting on the belt and a set of pins. Battery and battery charging are not included in the package.

GRI 1 and 6

The battery shrub cutter is a hand tool with a built-in electric DC brush motor.

Full description

The tool is designed for cutting a hedge and consists of the following main elements: a plastic case, an electric motor, a straight-toothed gear, a set of knives, a controller, handles, a switch, filters, dust reflectors, a handle cover. The electric motor converts the electrical energy of direct current into the mechanical energy of the reciprocating movement of the blades of the knife cutter.

Technical characteristics: knife length - 520 mm, speed of rotation without load - 1350 rpm, distance between blades - 26 mm, width of blade opening - 15 mm, dimensions (DhShV): 938x195x193 mm, weight - 3.4 kg. Custodian is packed in a cardboard box along with protective glasses and a case.

GRI 1 and 6

The battery carver of threaded studs is a hand tool with a built-in electric brushless DC motor.

Full description

The tool is designed for cutting threaded studs and consists of the following main elements: plastic body, electric motor, hook, semiconductor switch, planetary gearbox, fixed mandrel, movable mandrel, cutting pads (knives), trigger switch, reverse switch lever, clamp screw, cover. The rotor of the electric motor transfers torque to the planetary gearbox, then the torque is transferred to a movable plate, which cuts off part of the material from the threaded stud being processed. Technical specifications: diameter of handled studs: M6-M10; cutting speed for stud M10 - 3.0 sec; minimum cutting length - 20 mm; overall dimensions (DhShV): 199x103x308 mm, weight - 3.2 kg.

Delivery kit: battery carver of threaded studs, case made of plastic, set of cutting knives, bolt, cover, depth limiter, hexagonal key.

GRI 1 and 6

The manual battery tool with a built-in electric motor is designed to drive pin nails into building materials, such as wood.

Full description

The tool works from a mechanical drive with a shock spring and a drummer. The impact mechanism is lifted into the working position using a built-in 12-volt collector electric motor that is powered by the battery. To hammer the nail, the operator presses the trigger switch to stop. To score the next nail, you need to remove your finger from the trigger switch and then press it again. The tool uses a pin nail - a stud without a hat with a diameter of 0.6 mm. The pin nails are refueled into a 120-nail store that is inserted into the tool.

The number of pin nails remaining in the tool can be checked using a viewing window. The kit with the tool includes a belt hook. The tool is packed in a cardboard box, which has markings. The tool comes in assembled form. Tool dimensions: 231 mm x 80 mm x 226 mm.

GRI 1 and 6

The manual tool with a built-in electric motor, with power from a 36 V battery block (not included in the supply) is designed for grinding, stripping (including a wire brush), cutting holes and cutting materials from metals and stone without using water.

Full description

The tool consists of the following main elements: body, brushless electric motor, bearing box, spindle, shaft locker, unlock lever, switch lever, shaft locker, disc casing, mode indicator, side handle for ease of use, battery protection. Depending on the requirements of the user, a grinding disc, a cup wire brush or a hole-cutting head can be installed on the tool (not included in the supply). The electric motor converts the electrical energy of the current into the mechanical energy of the rotational movement of the disk, brush, etc.

The tool provides “high speed mode” (electronic speed adjustment) and “high torque mode”, which automatically change depending on the load.

Technical characteristics: supply voltage - 2 x 18 V; idling frequency - 6000 rpm; disc diameter - 230 mm; sound pressure level - 88 dB(A).

Overall dimensions (D x Sh x B): 499 x 250 x 158 mm. The goods are delivered in a cardboard box. Included with the goods are: casing, key, side handle.

GRI 1 and 6

Shock screw is a hand tool with a built-in electric motor, with a battery power source.

Full description

Technical characteristics: Max. torque (at the turn) - 285 N·m., max. steep. torque (on breakage) - 500 N·m., 3 modes of adjustment of impact - 80/175/280 N·m., idling frequency 0-2800/0-2100/0-1600 rpm./min., frequency of impacts - 0-3500/0-2600/0-1800 bpm., nominal voltage - 18 V DC., dimensions -147 x 79 x 249 mm, weight 1.5 - 1.8 kg. The set of goods includes fasteners on the belt. Hycovert comes without batteries and charger. The goods are delivered in a cardboard box.

GRI 1 and 6

Shock screw is a hand tool with a built-in electric motor, with a battery power source.

Full description

Technical characteristics: torque (at the turn) 190 N·m, idling frequency 0–2300 rpm, frequency of impacts 0–3000 bpm, nominal voltage – 18 V DC, dimensions – 176 x 79 x 237 mm, weight – 1.4–1.7 kg. The set of goods includes fasteners on the belt. Hycovert comes without batteries and charger. The goods are delivered in a cardboard box.

GRI 1 and 6

Shock screw is a hand tool with a built-in electric motor, with a battery power source.

Full description

Hycovert is designed to unscrew and twist bolts and nuts with impact action. The tool consists of the following main elements: a plastic case, an electric brushless motor, a gearbox, a tailing, a trigger switch, a reverse switch to change the direction of rotation, a battery. Before starting work, a head corresponding to the size of the twisted nut is put on the tailing of the nut (heads are not included in the delivery kit). The operator controls the screwdriver while working with one hand and holds it on weight. Technical specifications: max. torque (at the turn) - 285 N·m, max. steep. torque (on break) -500 N·m, 4 modes of adjustment of impact Hard/Normal/Medium/Soft., idling frequency (Hard/Normal/Medium/Soft) 0–3200/2600/1800/1000 rpm, frequency of impacts (Hard/Normal/Medium/Soft) 0–4000/3400/2600/1800 beats/min, nominal voltage - 18 V of direct current, dimensions - 144 x 81 x 228 mm, weight of 1.5 - 1.8 kg, The set of goods includes fasteners on the belt.

Hycovert comes without batteries and charger. The goods are delivered in a cardboard box.

GRI 1 and 6

The battery impact screwdriver is a manual rotary action tool with a built-in electric brushless motor.

Full description

The tool is designed to twist screws into wood, metal and plastic. Thanks to the reverse switch, screws can be twisted. The tool consists of the following main elements: plastic body, electric motor, electric brake, fast change button, sleeve, spindle, reverse switch to change the direction of rotation, LED front lamp, trigger switch on. Off. The tool is equipped with an improved impact mechanism with 8 modes of operation: mode for working with wood, mode for working with bolts (mode "Bolt"), two modes for working with thin or thick metal - modes T (1) and T (2), four modes of adjusting the torque, allowing you to choose the appropriate tightening mode - 4 (maximum), 3 (high), 2 (medium) and 1 (small).

The tool has a programmable preset mode. The application mode is a variant of impacts and rotation for screwing with predetermined tool parameters. Having saved a certain mode of application in the tool memory, it is possible to switch to the saved mode with one click of the quick switching button. The tool provides an assistance function that allows you to use several convenient application modes for controlled screw twisting. Screw screws is carried out by means of a screwdriver nozzle or nest bits with a tail. The tool comes in a cardboard box together with a belt fastener, bat.

The charger is not included in the package. Technical specifications: overall dimensions (DhShV) 114x81x189 mm, size of fastener: screw/standard bolt, high-strength bolt, screw (tree) 22-125 mm, cartridge diameter of 6.35 mm, maximum torque of 180 Nm, idling frequency (maximum/high/medium/low power mode) 0-3600/0-3200/0-2100/0-1100 rpm, frequency of impacts (maximum/high/medium/low power mode) 0-3800/0-3600/0-2600/0-1100 beats/min, nominal voltage of 18 V DC, 290 watts.

GRI 1 and 6

The hand tool with a built-in electric motor, with power from the battery unit (not included in the supply) is designed for grinding large surfaces of wood, plastic, metal materials, painted surfaces.

Full description

Structurally consists of the following main components: body; built-in brush DC motor; switch; start/speed control button; battery unit; round support plate to which the abrasive disc is attached; bearing boxes; spindle; rings (brake and lock); controller unit; abrasive disc; fan. The goods are equipped with a dust collector. The product provides for electronic adjustment of the number of engine speeds, the choice of rotation speed. The axis of the electric motor is the axis of the working part of the tool. The tool drives an electric motor that transmits rotational motion to a support plate with an abrasive disk installed, which rotates around its axis during the grinding of the surface.

The dust is sucked by means of a fan through holes in the abrasive disc into the dust collector.

Technical characteristics: supply voltage - 18 V DC; diameter of abrasive disk - 125 mm; amplitude of oscillations - 2.8 mm; idling frequency - 7000/9500/11000 rpm, frequency of oscillations - 14000/19000/22000 oscillations / min.

Overall dimensions: 175x123x153 mm. The goods are delivered in a cardboard box. Included with the goods are: abrasive disk, dust collector.

GRI 1 and 6

The manual tool with a built-in electric motor, with power from the battery unit (not included in the supply) is designed for grinding large surfaces of wood, plastic, metal materials, painted surfaces.

Full description

Structurally consists of the following main components: a complex body with a handle; a built-in brushless DC electric motor (BL motor); a base (support plate) of a rectangular shape to which the grinding paper is attached; a perforated plate; clamps; installation slats; bearings; fan; switch; controller. The goods are equipped with a dust collector with a bag for collecting dust and a front handle for the convenience of the consumer. It is possible to adjust the speed (3 positions). On the basis, a sheet of grinding paper is fixed with a clip, a perforated plate is installed.

Next, you need to press on the perforated plate so that holes for dust absorption are formed in the paper. The tool is driven by an electric motor that transmits vibrational motion to the base. Grinding is carried out by reciprocating movements of the base with fixed grinding paper. The dust is sucked by a fan through holes in the grinding paper into the dust collector.

Technical characteristics: supply voltage - 18 V DC; base size - 93 x 185 mm; grinding paper size - 93x228 mm, oscillation amplitude - 2.0 mm; speed - 4000/8000/12000 rpm.

Overall dimensions (D x V W, mm): 336 (front handle) x 92 x 158. The goods are delivered in a cardboard box. Complete with the goods follow: dust collector with a dust bag, perforated plate, grinding paper.

GRI 1 and 6

Shock screw is a hand tool with a built-in electric motor, with a battery power source.

Full description

Technical characteristics: maximum torque (at a turn) - 210 N m; 2 modes of adjustment of impact - Hard/Soft; frequency of idling Hard/Soft: 0-2400/0-1300 rpm; frequency of impacts Hard/Soft: 0-3600/0-2000 bpm; nominal voltage - 18 V DC; dimensions - 151 x 79 x 235 mm; weight - 1.2-1.5 kg. The set of goods includes fasteners on the belt. Hycovert comes without batteries and charger. The goods are delivered in a cardboard box.

GRI 1 and 6

Full description

Structurally consists of the following main elements: body; built-in brushless electric motor (BL-motor); gearbox; bearing box; spindle; switch (wide key); disc casing; two dust covers (right, left); antivibration side handle for ease of use. Depending on the requirements of the user, a grinding disc can be installed on the tool, as well as a cup wire brush or a head for cutting holes (not included in the supply). The electric motor converts the electrical energy of direct current into the mechanical energy of the rotational motion of the disc, brush, etc.

The tool provides automatic shutdown functions during jamming (AFT technology), ADT speed and torque control technology, dust and moisture protection technology (XPT technology).

Technical characteristics: supply voltage -18 V DC; rotation frequency (rpm) - 3000 ÷ 8500 (manual adjustment); disc diameter - 125 mm; sound pressure level - 83 dB(A); sound power level - 91 dB(A). The goods are delivered in a cardboard box. Included with the goods are: protective casing, antivibration side handle, grinding disc.

GRI 1 and 6

Shock screw is a hand tool with a built-in electric motor, with a battery power source.

Full description

Technical characteristics: max. torque (at the turn) 230 N·m., idling frequency 0 - 2100 rpm. / min., frequency of impacts 0 - 3200 beats / min., voltage - 18 V DC, dimensions - 165 x 79 x 234 mm. Weight 1.5 - 1.8 kg. The set of goods includes fasteners on the belt. Hycovert comes without batteries and charger. The goods are delivered in a cardboard box.

GRI 1 and 6

The battery barbell is a hand tool with a built-in electric DC brush motor.

Full description

The tool is designed for cutting a hedge and consists of the following main elements: a plastic case, an electric motor, a gearbox, a crank mechanism, a cutter blade (knife), a controller, a trigger switch, a swivel head, a locking lever, an angle adjustment mechanism, handles (front, rear), tubes, a switch, a handle cover. The electric motor converts the electrical energy of direct current into the mechanical energy of the reciprocating movement of the blades of the knife cutter. Technical specifications: nominal power supply voltage 18 V DC, output power 250 W, knife length - 460 mm, speed of rotation without load - 1800 rpm, distance between blades - 28 mm, blade opening width 18 mm, cutting blade angle 135 ° (up 60 °, down 75 °), telescopic bar extends by 62 cm, dimensions (DhShV): 1889-2511 x 87 x 134 mm.

Custodian is packed in a cardboard box together with a protective casing and belt tooling.

GRI 1 and 6

The battery shrub cutter is a hand tool with a built-in electric brushless DC motor.

Full description

The tool is designed to trim the hedge and consists of the following main elements: plastic body, electric motor, gearbox, connective traction, friction plates, knife cloths (blades), ball bearings, controller, locking lever, locking lever, damper, handles, trigger switch. The electric motor converts the electrical energy of direct current into the mechanical energy of the reciprocating movement of the blades of the knife cutter. Technical specifications: nominal power supply voltage 18 V DC, output power 520 W, knife length - 600 mm, speed of rotation without load 1000 - 2200 rpm, distance between blades - 35 mm, blade opening width 21.5 mm, dimensions (DhShV): 1121 x 225 x 192 mm.

The battery and battery charger are not included in the package. Custodian is packed in a cardboard box together with a protective casing.

GRI 1 and 6

The battery shrub cutter is a hand tool with a built-in electric brushless DC motor.

Full description

The tool is designed to trim the hedge and consists of the following main elements: plastic body, electric motor, gearbox, connective traction, friction plates, knife cloths (blades), ball bearings, controller, locking lever, locking lever, damper, handles, trigger switch. The electric motor converts the electrical energy of direct current into the mechanical energy of the reciprocating movement of the blades of the knife cutter. Technical specifications: nominal power supply voltage 18 V DC, output power 520 W, knife length - 500 mm, speed of rotation without load 1000 - 2200 rpm, distance between blades - 35 mm, blade opening width 21.5 mm, dimensions (DhShV): 1016 x 225 x 192 mm.

The battery and battery charger are not included in the package. Custodian is packed in a cardboard box together with a protective casing.

GRI 1 and 6

The battery vibration grinder is a hand tool with a built-in DC electric motor.

Full description

The tool is designed for grinding large surfaces of wood, plastic, metal materials, painted surfaces. The tool consists of the following main elements: plastic case with brushless DC motor, switch unit, impeller, fan guide, pulley, spindle, belt, grinding paper clamping, rectangular base, rectangular support plate, balancer, eccentric, ball bearings. The axis of the engine coincides with the axis of the working tool. Adjustment of the engine speed (high / low) is provided.

Principle of operation: a sheet of grinding paper is fixed on the support plate. The vibration grinder is driven by an electric motor that transmits through the eccentric the oscillatory movement to the support plate. The dust is sucked by means of the fan impeller through holes in the grinding paper into the dust collector.

Technical characteristics: maximum power of 210 W, nominal voltage of 18 V DC, grinding paper size 114 x 140 mm, oscillation amplitude of 1.5 mm, oscillation frequency 11 000 - 14 000 rpm, idling frequency 22 000 - 28 000 oscillations / min. The grinder is packed in a cardboard box together with a dust collector with a dust bag, a triangular support plate, a perforation plate, grinding paper.

GRI 1 and 6

The battery mill is a hand tool with a built-in DC electric motor.

Full description

The tool is designed for cleaning and profiling wood, plastic and similar materials. The tool consists of the following main elements: plastic / aluminum housing with a built-in electric brushless DC motor, start/stop button, swivel speed regulator, lock lever, adjusting screw, scale regulator, shaft locker, tsang nut, pulley, base plate, work area lighting, belt, milling cutter. The operator sets the base of the tool on the processed part so that the cutter does not touch the part. Next, the operator turns on the tool and moves the base of the tool, pressing it against the surface of the part until the cutting process is completed.

The cutter in the process of processing the part carries out rotational movements.

Technical characteristics: nominal voltage 18 V DC, dimensions (DhShV) 134×89×226 mm, number of revolutions without load 10 000 - 30 000 rpm, size of tsang cartridge 6/8 mm, milling depth: with submersible base 0-35 mm, edge base 0-40 mm, net weight 2.1 kg. The miller is packed in a cardboard box together with a edge vertical base, a guide in the assembly, a dust collector pipe, a copying bushing 10, a tsang clamp of 8 mm, wrenches 13/22.

GRI 1 and 6

The battery impact screwdriver is a manual rotary action tool with a built-in electric brushless motor.

Full description

The tool is designed to twist screws into wood, metal and plastic. Thanks to the reverse switch, screws can be twisted. The tool consists of the following main elements: plastic body, electric motor, cartridge, electric brake, sleeve, spindle, gear, reverse switch to change the direction of rotation, LED front lamp, trigger switch on. Off. The tool is equipped with a shock mechanism with 3 modes of operation: high power mode (Solid mode - puff in cases where large effort and speed are required), low power mode (Soft mode - puff with less effort to avoid damage to the screw thread), mode A (assistance mode - improved control of the screw tightening process).

In this mode, the tool begins to twist the screw with low speed, then the impact action is activated, the speed increases and reaches its maximum. Screw screws is carried out by means of a screwdriver nozzle or nest bits with a tail. To install the nozzle, the clutch is shifted and the nozzle is inserted into the clutch to the point, then the clutch is lowered to fix the nozzle. To remove the nozzle, you need to pull the clutch on yourself and pull the nozzle. To begin work, you need to firmly take up the tool, insert the tip of the screwdriver nozzle into the screwdriver head.

Next, press the tool to such an extent that the nozzle does not slip off the screw and turn on the tool for work. The torque of the tightening may vary depending on the type and size of the screw (screw / bolt), the material of the fixed working part. The tool comes in a cardboard box together with a plastic case, a fast charger (type of Li-Ion batteries, 2x5.0Ah capacity), belt fastener, bat. Technical specifications: overall dimensions (DhShV) 133x81x185 mm, size of fastener: standard bolt M5-M14. high-strength bolt M5-M12. 22-90 mm screw, diameter of the cartridge (hexagon) 6.35 mm, maximum torque of 140 Nm, idling frequency (low/high power mode) 0-300/0-3000 rpm, frequency of impacts (high/low power mode) 0-2000/0-4100 beats / min, nominal voltage of 18 V DC, 240 watts, net weight of 1.5 kg.

GRI 1 and 6

The battery impact screwdriver is a manual rotary action tool with a built-in electric brushless motor.

Full description

The tool is designed to twist screws into wood, metal and plastic. Thanks to the reverse switch, screws can be twisted. The tool consists of the following main elements: plastic body, electric motor, cartridge, electric brake, electronic speed adjustment, clutch, spindle, reverse switch to change the direction of rotation, bushing, LED illumination of the working area, trigger switch on. Off. Screw screws is carried out by means of a screwdriver nozzle or nest bits with a tail. To install the screwdriver nozzle, the clutch is shifted and the nozzle is inserted into the clutch to the point.

To remove the nozzle, you need to pull the clutch on yourself and pull the nozzle. To begin work, you need to firmly grasp the tool, insert the tip of the screwdriver nozzle into the screwhead (screw, bolt). Next, press the tool to such an extent that the nozzle does not slip off the screw (screw, bolt) and turn on the tool for work. The torque of the tightening may vary depending on the type and size of the screw (screw / bolt), the material of the fixed working part. The tool comes in a cardboard box together with a belt fastener.

The charger is not included in the package.

Technical characteristics: overall dimensions (DhShV) 126x79x238 mm, fastener size: screw/standard bolt M4-M8/M5-M16, high-strength bolt M5-M14, screw 22-125 mm, cartridge diameter 6.35 mm, maximum torque 170 Nm, idling frequency 0-3400 rpm, frequency of impacts 0-3600 bpm, nominal voltage 18 V DC.

GRI 1 and 6

A hand tool with a built-in electric brushless DC motor is designed for sawing and cutting wood, plastic, plaster, non-ferrous metals and fastening elements (for example, nails and brackets).

Full description

With it, you can also perform work with soft wall tiles, dry grinding and cleaning small surfaces. The tool is multifunctional, none of the types of work is the main one. The tool consists of the following main elements: body, lock lever, fixing bolt, flange of tool for fixing tool, electric motor, crank case, slider switch, regulator with scale, front lamp.

Principle of operation: one of the elements of the tool is installed on the flange of the tool by means of the locking lever: a segmented saw disc, a shaber, a grinding plate, a triangular sandpaper, a triangular piece of polishing felt (not included in the delivery kit). The operator activates the instrument. As a result, the material is processed. The main technical parameters: nominal voltage 18 V DC, the number of oscillations per minute: 10 000 – 20 000, the angle of oscillation 1.8 ° (full 3.6 °), the type of fastening of the STARLOCK PLUS / STARLOCK MAX tooling, maximum performance 370 W, overall dimensions (DhShV) 305×95×125 mm, net weight 2 kg.

The tool comes assembled in a cardboard box.

GRI 1, 3(c) and 6

The battery corner grinder is a manual tool with a built-in brushless electric motor, with battery power (not included in the supply).

Full description

The tool is designed for grinding, stripping and cutting materials from metals and stone without using water. Structurally consists of the following main elements: body; built-in electric motor; spindle; bearings; gearbox; spiral conical gear; sealing rings; disc casing; tool start/stop switch (type of switch - wide key); side handle for ease of use. A grinding disc can be installed on the tool, as well as a cup wire brush (the brush is not included in the supply). An electric motor converts the DC electrical energy into the mechanical energy of the disc/brush rotational motion.

When working, the operator turns on the tool and presses the disk to the processed part.

Technical characteristics: power supply voltage - 36-40 V DC; idling frequency 3000-8500 rpm; disc diameter - 125 mm Overall dimensions (D x Sh x V): 413 x 140 x 156 mm, weight without battery - 3.0 kg. Included with the goods are: protective casing, side handle, key, disk. The goods are delivered in a cardboard box.

GRI 1 and 6

What import requires

Veterinary and sanitary control

Goods fall under supervision by their type and characteristics

Sanitary and epidemiological supervision (control)
rule for the whole chapter 84
Материалы, оборудование, вещества, устройства, применяемые в сфере хозяйственно-питьевого водоснабжения и при очистке сточных вод, в плавательных бассейнах; Продукция машиностроения и приборостроения производственного, медицинского и бытового назначения, кроме запасных частей к транспортным средствам и бытовой технике (за исключением контактирующих с питьевой водой и пищевыми продуктами); Продукция, изделия, являющиеся источником ионизирующего излучения, в том числе генерирующего, а также изделия и продукция (товары), содержащие радиоактивные вещества; Строительное сырье и материалы, в которых гигиеническими нормативами регламентируется содержание радиоактивных веществ, в том числе производственные отходы для повторной переработки и использования в народном хозяйстве, лом черных и цветных металлов (металлолом); Оборудование, материалы для воздухоподготовки, воздухоочистки и фильтрации; Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры
Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

ТР ТС 010/2011Safety of machinery and equipment
- Оборудование гаражное для автотранспортных средств и прицепов — certificate of conformity (part of the heading)
- Инструмент механизированный, в том числе электрический (инструмент ручной) — certificate of conformity (part of the heading)
- Оборудование для вскрышных и очистных работ и крепления горных выработок: комбайны очистные; комплексы механизированные; крепи механизированные для лав; пневмоинструмент — certificate of conformity (part of the heading)
- Оборудование для бурения шпуров и скважин, оборудование для зарядки и забойки взрывных скважин: перфораторы пневматические (молотки бурильные); пневмоударники; станки для бурения скважин в горнорудной промышленности; установки бурильные — certificate of conformity (part of the heading)
- Оборудование и машины строительные — declaration of conformity or certificate of conformity (part of the heading)
ТР ЕАЭС 043/2017About requirements to means of ensuring fire safety and fire extinguishing
- Инструмент для проведения специальных работ на пожарах (предназначенный для применения в качестве средств обеспечения пожарной безопасности и пожаротушения) — declaration of conformity
ТР ТС 004/2011Safety of low-voltage equipment
- газонокосилки, триммеры (для стрижки газонов и живой изгороди) — certificate of conformity
ТР ТС 020/2011Electromagnetic compatibility of technical means
- газонокосилки, триммеры (для стрижки газонов и живой изгороди) — certificate of conformity
- дрели, перфораторы, шуруповерты, гайковерты, отвертки — certificate of conformity
- шлифовальные машины (в том числе угловые), полировальные машины — certificate of conformity
- ножницы — certificate of conformity
- инструменты ручные аккумуляторные (с зарядным устройством) — certificate of conformity
ТР ЕАЭС 037/2016Restriction of the Use of Hazardous Substances in Electrical and Radio Electronics Products
- для садово-огородного хозяйства: газонокосилки, триммеры (для стрижки газонов и живой изгороди) — declaration of conformity
- дрели, перфораторы, шуруповерты, гайковерты, отвертки — declaration of conformity
- шлифмашины, в том числе угловые, полировальные машины — declaration of conformity
- ножницы — declaration of conformity
- инструмент ручной аккумуляторный (с зарядным устройством) — declaration of conformity
ТР ЕАЭС 050/2021About safety of products intended for civil defense and protection from emergency situations of natural and man-made character
- ножницы механизированные для резки металлоконструкций — certificate of conformity

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

How it is done in practice

Valid documents in the EAEU unified register for subheading 8467 29: certificates 9,073, declarations 7,358.

By technical regulation: ТР ТС 010/20119,624ТР ТС 020/20119,582ТР ЕАЭС 037/20166,032ТР ТС 004/20113,976ТР ТС 012/20118
Schemes: 1д6,2533с4,7181с4,0524д4493д330The letter after the scheme number shows the form: certification or declaration of conformity.
Most active certification bodies: АО Региональный орган по сертификации и тестированиюТОО «Научно-технический центр электромагнитной совместимости и безопасности информационных систем»ООО «Гильдия Качества»
Manufacturers outside the EAEU: China2,211Germany180United States58Italy52Taiwan43Hong Kong SAR China34

Manufacturers of these goods →Check a supplier’s document by its number →

Payments on import

Duty for this code: 10%. On top of the duty, on import into Russia you pay VAT of 22% of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

Import VAT in EAEU countries

Russia22%Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025)
Kazakhstan16%Tax Code of Kazakhstan, Art. 503(1), from 01.01.2026
Belarus20%Tax Code of Belarus, Art. 122
Armenia20%Tax Code of the Republic of Armenia
Kyrgyzstan12%Tax Code of the Kyrgyz Republic

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

Calculate the whole deal →Quick payment estimate →

The right code is in the HS code search.