EAEU HS code

8467 29 510 0 — Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor: with self-contained electric motor: other: other: grinders and sanders: angle grinders

Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor: with self-contained electric motor: other: other: grinders and sanders: angle grinders

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

Duty rate

10%

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit

шт

Item

Requirements and measures

Veterinary and sanitary control1
Conformity assessment8

None: russian bans and restrictions, dual use, EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT

22%

The general import rate in Russia: Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025). This code is not named on the 10% VAT list (Decree No. 908) or the exemption list (No. 1042). The list of medical goods No. 688 is not checked here.

Where it sits in the nomenclature

Section XVI. Machinery and mechanical appliances; electrical equipment; parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles

84Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof
8467Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor; parts thereof
8467 29Electromechanical tools for working in the hand, with self-contained electric motor (excl. saws and drills)
8467 29 51With self-contained electric motor: other: other: grinders and sanders: angle grinders
8467 29 510 0you are here

Explanatory notes to heading 8467 4 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

8467 Tools for working in the hand, pneumatic, hydraulic or with self-contained electric or non-electric motor: – Pneumatic: 8467 11 – – Rotary type (including combined rotary-percussion) 8467 19 – – Other – With self-contained electric motor: 8467 21 – – Drills of all kinds 8467 22 – – Saws 8467 29 – – Other – Other tools: 8467 81 – – Chain saws 8467 89 – – Other – Parts: 8467 91 – – Of chain saws 8467 92 – – Of pneumatic tools 8467 99 – – Other

This heading covers tools comprising an electric motor, a compressed air engine (or a compressed air piston), an internal combustion engine or any other engine (e.g. a small hydraulic turbine); an engine powered by compressed air (a) is normally powered by an external source of compressed air, and in the case of an internal combustion engine, the batteries of the ignition system are sometimes located separately. In pneumatic instruments, the action of compressed air is sometimes supplemented by hydraulic connections. These instruments are classified in this heading only if they are hand tools. The expression "hand tools" means tools that are designed to be held in the hand during use, as well as heavier tools (such as tamping to seal the ground), which are portable, that is, can be lifted and manually carried by the operator m, especially in the process of performing work, and which are also designed to control and direct the movement of the hand during operation. To prevent fatigue during operation caused by exposure to their full weight, such tools can be used with auxiliary support devices (for example, tripods, jack racks, suspended lifting waist). However, some hand tools of this heading have devices enabling them to be temporarily fixed on the pole. When presented together with a support, such instruments are classified in this heading provided that they are in fact “hand tools” as defined above. Some instruments falling under this heading may be equipped with additional devices (e.g. a fan and a dust collector for the removal and collection of dust during operation). This heading does not include tools which, because of their mass, size, etc., are obviously not capable of being held by hand as described above. It also excludes tools (portable or non-portable) equipped with a support plate or other device for fastening on a wall, workbench, floor, etc., tools that are equipped with devices for moving on rails (for example, machines for cutting grooves in railway sleepers or drilling them), and machines moved and controlled from behind by a walking operator, or similar machines on wheels operated by hand, for example, machines for grinding floors made of concrete, marble or wood, etc. In addition, this heading does not include kits consisting of a fixture for securing a working tool with one or more working tools and a separate spark-ignition internal combustion piston engine or a separate electric motor with a flexible drive shaft; a fixture for securing a working tool is classified in heading 8466, an engine with a flexible drive shaft is classified in heading 8407 or 8501, as the case may be, and the working tools are classified in the relevant headings. The instruments of this heading include tools for the processing of various materials and are used in various branches of industry. If the above conditions are met, this heading covers, inter alia: (1) Machines for drilling, cutting threads with a meter or opening openings. (2) Drilling machines, drill hammers and the like. (3) Wrenches, screwdrivers, nuts. (4) Devices for planing, adjustment to a certain size, edges of the plane or similar devices.

(5) Sewing machines, grinding machines using abrasive stones, skins, polishing machines and the like. (6) Machines with wire brushes. (7) Circular saws, chain saws and the like. (8) Various types of hammers, e.g. cutting hammers, scale upholstery hammers, minting hammers, riveting hammers, concrete crushers. (9) Sealing type rivet hammers; rivet cutting devices and other collapsing devices. (10) Sheets for metal sheet (scissor or matrix type). (11) Tampering of molding mixture, rod knocking tool for removing rods from castings, vibrators for casting forms. (12) Tampering for soil compaction in the construction or repair of roads. (13) Automatic shovels. (14) Vibrators for concrete, facilitating its movement and laying. (15) Machines for cutting hedges. (16) Devices for removing scale from boilers having a hydraulic actuator. (17) Compressed-air lubricating pistols for garages, etc. (18) Portable machines for processing lawns, cutting grass, for example, in corners, along walls, curbs, under bushes. Such machines have a built-in motor in a light metal frame and a cutting device, usually consisting of a thin nylon thread. (19) Portable shrubs with built-in motor, drive shaft (rigid or flexible) and working tool holder, presented together with various interchangeable cutting tools, for installation in the holder of the working tool. (20) Cutting materials used in the textile industry. (21) Engraving tools. (22) Manual electric scissors, consisting of a fixed cutting blade and a movable cutting blade operated by an integrated electric motor, used in a clothing workshop, hat workshops, households, etc. PARTS Subject to the general provisions relating to the classification of parts (see the general provisions of Section XVI), this heading also includes parts (other than fixtures for securing the working tool of heading 8466) of the instruments of this heading. This heading also does not cover: (a) grinding, sharpening, polishing, cutting circles and anilological articles of stone, ceramics or agglomerated abrasives (heading 6804); (b) instruments of Chapter 82; (c) air compressors (heading 8414);

(d) appliances for spraying or atomising liquids or powders, hand-operated sprayers, sand blasting machines and similar appliances (heading 8424); (e) electric lawn mowers (heading 8433); (f) electro-mechanical domestic appliances (heading 8509); (g) electric shavers, hair clippers and hair-removing appliances of heading 8510; (h) electro-mechanical hand tools for medical or dental use (heading 9018).

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 84 — Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof 24 items

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) millstones, grinding stones or other articles of Chapter 68;

(b) equipment or devices (e.g. pumps) of ceramic materials and ceramic parts of machinery or devices of any material (Chapter 69);

(c) laboratory glassware (heading 7017); equipment, devices or other articles for technical purposes or parts thereof of glass (heading 7019 or 7020);

(d) articles of heading 7321 or 7322 or similar articles of other base metals (Chapters 74 to 76 or 78 to 81);

(e) vacuum cleaners of heading 8508;

(f) electromechanical household appliances of heading 8509; digital cameras of heading 8525;

(g) radiators for articles of Section XVII; or

(h) manual mechanical brushes for floor cleaning, without engine (heading 9603).

2. Subject to the provisions of Note 3 to Section XVI and Note 11 to this Chapter, a machine or device which meets the description in one or more of headings 8401 to 8424 or heading 8486 and at the same time the description in one or more headings 8425 to 8480 is included in the relevant heading of the first series of headings or in heading 8486 as the case may be, and not in the second series.

(A) However, heading 8419 does not cover:

(i) seed germination equipment, incubators or brooders (heading 8436);

(ii) machinery for wetting grains (heading 8437);

(iii) diffusion apparatus for the extraction of sugary juice (heading 8438);

(iv) equipment for the heat treatment of textile yarn, textile materials or finished textile articles (heading 8451); or

machining equipment, assemblies or laboratory equipment in which temperature change, even if necessary, is an auxiliary process.

(B) Heading 8422 does not cover:

(i) sewing machines for sewing bags or similar packagings (heading 8452); or

(ii) office equipment of heading 8472.

(i) paint-blasting printing presses (heading 8443); or

(ii) water jet cutting machines (heading 8456).

3. A machine for processing any material which corresponds to the description of heading 8456 and simultaneously to the description of heading 8457 to 8461, 8464 or 8465 is classified in heading 8456.

4. Heading 8457 covers only metalworking machines other than lathes (including multipurpose lathes) which may perform different types of machining operations by:

(a) the automatic replacement of tools from a tool store or similar device in accordance with the processing program(s);

(b) the automatic application simultaneously or sequentially of different processing heads operating at a fixed workpiece (assembly single-position machines); or

5. For the purposes of heading 8462, the term “longitudinal cutting line” for flat products means a process line consisting of a winder, a correct device, a longitudinal cutting device and a winder. The term “cross-cutting line” for flat products means a process line consisting of a unwinder, a correct device and a cutting device.

6. (A) For the purposes of heading 8471, the term “computers” means machines capable of:

(i) store the processing program or programs and at least the information currently necessary to execute the program;

(ii) be freely reprogrammable according to user requirements;

(iii) perform user-defined arithmetic calculations; and

(iv) perform, without human intervention, a processing program requiring the computer to modify its actions by making logical decisions during processing.

(B) Computing machines can be made in the form of systems consisting of a different number of individual blocks.

(C) Subject to the provisions of Notes (D) and (E) below, a block shall be treated as part of a computing system if it satisfies all of the following conditions:

(i) exclusively or principally used in a computing system;

(ii) is capable of being connected to the central processing unit either directly or through one or more other units; and

(iii) is capable of receiving or presenting information in such form (codes or signals) as may be used by the system.

Separately presented computer units are classified in heading 8471.

However, keyboards, X-Y-coordinate input devices and disk storage units which satisfy the conditions laid down in Notes (B) (ii) and (B) (iii) above are in all cases to be regarded as blocks of heading 8471.

(D) Heading 8471 does not cover the following devices, presented separately, even if they meet all the conditions of Note 6(C) above:

(i) printers, copiers, facsimile machines, combined or not;

(ii) apparatus for receiving or transmitting voice, images or other data, including apparatus for providing communications over a wired or wireless communication network (for example, on a local or wide area network);

(iii) loudspeakers and microphones;

(iv) television cameras, digital cameras and video recording cameras;

(v) monitors and projectors not combined with television reception equipment.

(E) Machines containing or working in conjunction with a computer and performing specific functions other than information processing are classified in the headings according to their specific functions or, if this is not possible, in the residual headings.

7. Heading 8482, inter alia, covers polished steel balls whose maximum and minimum diameter does not differ from the nominal diameter by more than 1% or by more than 0.05 mm, whichever is smaller. Other steel balls are classified in heading 7326.

8. A machine which is used for more than one purpose shall be classified as if its primary purpose were the only one.

Subject to the provisions of Note 2 to this Chapter and Note 3 to Section XVI, a machine whose primary purpose is not described in any heading or a machine in which none of its functions is primary is classified in heading 8479, unless the context otherwise provides. Heading 8479 also includes machinery for the manufacture of ropes or ropes (e.g. knitting machines) from metal wire, textile yarn or other materials or from a combination of such materials.

9. For the purposes of heading 8470, the term “pocket” applies only to devices not exceeding 170 x 100 x 45 mm.

10. For the purposes of heading 8485, the term additive manufacturing (also referred to as 3D printing) means the formation of physical objects based on a digital model by successively adding and layering, sealing and curing a material (e.g., metal, plastics or ceramics).

Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machines as described in heading 8485 are classified in that heading and no other heading of the Nomenclature.

11. (A) Notes 12(a) and 12(b) to Chapter 85 also apply to the terms “semiconductor devices” and “electronic integrated circuits”, respectively, as used in this note and in heading 8486. However, in this note and in heading 8486, the term "semiconductor devices" also applies to photosensitive semiconductor devices and LEDs.

(B) In this note and in heading 8486, the term “plane display panel production” covers the fabrication of a flat panel of substrates. It does not cover the production of glass or the installation of printed circuit boards or other electronic components on flat panels. The term "flat display panel" does not apply to cathode ray tube technology.

(i) producing or eliminating defects in masks and patterns;

assemblies of semiconductor devices or electronic integrated circuits;

(iii) lifting, manipulating, loading or unloading boules, plates, semiconductor devices, electronic integrated circuits and flat display panels.

(D) Subject to the provisions of Note 1 to Section XVI and Note 1 to Chapter 84, machinery meeting the description in heading 8486 is classified in this heading and in no other heading of the Nomenclature.

Subheading notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. For the purposes of subheading 8465 20, the term ‘machining centres’ applies only to machine-tools for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, which can carry out different types of machining operations by automatic tool change from a magazine or the like in conformity with a machining programme.

2. For the purposes of subheading 8471 49, the term ‘systems’ means automatic data-processing machines whose units satisfy the conditions laid down in note 6(C) to Chapter 84 and which comprise at least a central processing unit, one input unit (for example, a keyboard or a scanner), and one output unit (for example, a visual display unit or a printer).

3. For the purposes of subheading 8481 20, the expression ‘valves for oleohydraulic or pneumatic transmissions’ means valves which are used specifically in the transmission of ‘fluid power’ in a hydraulic or pneumatic system, where the energy source is supplied in the form of pressurized fluids (liquid or gas). These valves may be of any type (for example, pressure-reducing type, check type). Subheading 8481 20 takes precedence over all other subheadings of heading 8481.

4. Subheading 8482 40 applies only to bearings with cylindrical rollers of a uniform diameter not exceeding 5 mm and having a length which is at least three times the diameter. The ends of the rollers may be rounded.

Additional notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheadings 8407 10 and 8409 10, the term “aviation engines” shall apply only to engines intended for assembly with an air or rotor.

2. В подсубпозицию 8471 70 300 0 также включаются устройства считывания компакт-дисков, являющиеся запоминающими устройствами вычислительных машин, которые предназначены для считывания сигналов с CD-ROM, аудиокомпакт-дисков и фотокомпакт-дисков и снабжены разъемом для наушников, регулятором громкости или кнопкой пуск/стоп.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheading 8482 10 900 1, the term “gross mass” means the total mass of the goods with all kinds of packaging materials and packagings ensuring their safety during storage and transport. The total weight of the goods does not include the mass of packaging materials or containers that are clearly suitable for reuse.

2. For the purposes of subheading 8415 81 001 0, the term “special production facilities” means premises in which the maintenance of precise values of temperature and humidity is due to the operational requirements of the equipment installed therein, such as machines, computers, switching equipment, surgical equipment, etc., or to the operations performed therein.

3. In subheadings 8427 20 190 1, 8427 90 000 1 and 8436 80 100 1, the date of manufacture shall be determined on the basis of the technical documentation of the manufacturer (technical passport, instruction manual) and the manufacturer's plate, which shall be fixed in a conspicuous, easily accessible place of the machinery and shall not be replaced during operation. If the manufacturer's technical documentation and the manufacturer's plate contain conflicting information about the date of manufacture or there is no information about the manufacturer of the equipment on the date of manufacture, then this technique is considered a technique, since the release of which more than 3 years have passed.

If the manufacturer's information indicates only the year of manufacture, then the date of manufacture of the equipment is considered 1 July of the year of manufacture; if the month and year of manufacture are indicated, the date of manufacture is the 15th day of the month specified in the manufacturer's information.

4. For the purpose of classification of goods in subheading 8482 10 900 1 in the states, whose territories constitute the customs territory of the Eurasian Economic Union, when applying the term "French border of the country of importation", the country of import is understood as the customs territory of the Eurasian Economic Union.

5. For the purpose of subheading 8407 10 000 3, the term “take-off power” means the maximum power developed by an aircraft piston engine.

“Take-off power” is specified in the technical documentation and (or) accompanying documents, measured in kilowatts or horsepower (1 kW corresponds to 1.35962 hp).

6. В подсубпозиции 8421 99 000 5 термин «элементы мембранные рулонного типа для фильтрования или очистки жидкостей» означает устройства цилиндрической формы, состоящие из:

- internal plastic perforated tube on which spirally wound membrane bags;

- drainage material located between membrane bags and glued to them on three sides.

The membrane package consists of a twice folded band of membrane containing an extruded grid inside.

At the ends of the membrane roll-type element, fixing discs and sealing cuffs can be installed.

7. For the purposes of subheading 8415 20 000 2, the term “in a single enclosure” refers to air conditioning units (air conditioners) in which all the elements are combined in a single enclosure, frame or platform.

The term "in a single housing" also applies to air conditioning units (air conditioners) in which the refrigeration compressor, which is part of a given air conditioning unit (air conditioner), is located separately, that is, not combined with the rest of the elements in one housing, on one frame or on one platform.

Classification rulings for this code (21)

Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.

The manual tool with a built-in brush electric motor and power supply from the electric network with a voltage of 230 V / 50-60 Hz AC is designed for grinding, stripping (including a wire brush), cutting holes and cutting materials from metal and stone without using water.

Full description

Structurally consists of the following main elements: complex body with ventilation holes; built-in electric brush engine; bearing unit; rotating spindle; fan to remove debris and dust that arise in the process of work; switch; shaft lock; disc casing; power cord. For the convenience of the user, the product is equipped with a side handle. Depending on the requirements of the user, the tool can be installed: abrasive cutting or diamond discs, cup or disk wire brushes, a head for cutting holes (not included in the supply).

The axis of the electric motor is located at an angle of 90° relative to the axis of the working part of the tool (disk, brush, etc.). The electric motor converts the electrical energy of alternating current into the mechanical energy of the movement of the disc, brush.

Technical characteristics: supply voltage - 230 V/50-60 Hz; power consumption - 2700 W; sound pressure level - 95 dB(A); sound power level - 103 dB(A); speed without load - 6600 rpm; maximum spindle length - 26 mm; disc diameter -230 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x B): 461 x 250 x 144 mm. The goods are delivered in a cardboard box. Included with the goods are: key, protective casing, side handle.

GRI 1 and 6

The manual tool with a built-in brush electric AC motor and power supply from the 230 V/50-60 Hz electrical network is designed for grinding, stripping (including a wire brush), cutting holes and cutting materials from metal and stone without using water.

Full description

Structurally consists of the following main elements: complex body; built-in electric brush engine; bearing unit; rotating spindle; fan to remove debris and dust that occur during operation; switch; lock lever; shaft locker; protective cover of the disc; power cord. For the convenience of the user, the product is equipped with a side handle, which is installed in three positions. Depending on the requirements of the user, the tool can be installed: abrasive cutting or diamond discs, cup or disk wire brushes, a head for cutting holes (not included in the supply).

The axes of the electric motor and the working part of the tool (disc, brush, etc.) are located at an angle of 90° relative to each other. The electric motor converts the electrical energy of alternating current into the mechanical energy of the movement of the disc, brush.

Technical characteristics: supply voltage - 230 V/50-60 Hz; power consumption - 2000 W; sound pressure level - 97 dB(A); sound power level - 105 dB(A); speed without load - 8500 rpm; maximum spindle length - 26 mm; disc diameter - 180 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x V): 432 x 200 x 132 mm. The goods are delivered in a cardboard box. Included with the goods are: key, protective casing, side handle.

GRI 1 and 6

The manual tool with a built-in brush electric AC motor and power supply from the electric network with a voltage of 230÷240 V / 50-60 Hz is designed for grinding, stripping and cutting materials from metal and stone without using water.

Full description

Structurally consists of the following main elements: complex body with holes; built-in electric brush engine; bearing unit; rotating spindle; fan to remove debris and dust that occur during operation; slider switch; lever; shaft retainer; protective cover of the disk; power cord. For the convenience of the user, the product is equipped with a side handle. Depending on the requirements of the user, the tool can be installed: a diamond (grinding) disc, as well as an abrasive cutting disc, disk or cup wire brushes (not included in the supply).

The tool provides a smooth start function. The axes of the electric motor and the working part of the tool (disc, brush, etc.) are located at an angle of 90° relative to each other. The electric motor converts the electrical energy of alternating current into the mechanical energy of the movement of the disc, brush.

Technical characteristics: supply voltage - 230÷240 V/50-60 Hz; power consumption - 720 W; sound pressure level - 85 dB(A); sound power level - 96 dB(A); speed without load - 11000 rpm; disc diameter - 125 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x V): 266 x 140 x 108 mm. Weight: 1.8 kg. The goods are delivered in a cardboard box. Complete with the goods follow: key, protective casing, side handle, grinding disc.

GRI 1 and 6

The manual tool with a built-in brush electric AC motor and power supply from the electric network with a voltage of 230÷240 V / 50-60 Hz is designed for grinding, stripping (including a wire brush), cutting holes and cutting materials from metal and stone without using water.

Full description

Structurally consists of the following main elements: complex body; built-in electric brush engine; bearing unit; spindle; fan; trigger switch; lock lever; shaft locker; protective cover disc; power cord. For the convenience of the user, the product is equipped with a side handle. Depending on the requirements of the user, the tool can be installed: a diamond (grinding) disc, as well as an abrasive cutting disc, a disk wire brush or a head for cutting holes (not included in the supply). The axes of the electric motor and the working part of the tool (disc, brush, etc.) are located at an angle of 90° relative to each other.

The electric motor converts the electrical energy of the alternating current into the mechanical energy of the disk movement.

Technical characteristics: supply voltage - 230÷240 V/50-60; power consumption - 1450 W; speed without load - 10000 rpm. /min; maximum spindle length - 23 mm; disc diameter - 125 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x V): 390 x 139 x 120 mm. The goods are delivered in a cardboard box. Complete with the goods follow: key, protective casing, side handle, grinding disc.

GRI 1 and 6

Full description

The electric motor converts the electrical energy of the alternating current into the mechanical energy of the disk movement.

Technical characteristics: supply voltage - 230÷240 V/50-60; power consumption - 1050 W; speed without load - 12000 rpm. /min; maximum spindle length - 23 mm; disc diameter - 125 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x V): 384 x 139 x 120 mm. The goods are delivered in a cardboard box. Complete with the goods follow: key, protective casing, side handle, grinding disc.

GRI 1 and 6

Full description

Structurally consists of the following main elements: complex body; built-in electric brush engine; bearing assembly; fan; spindle; switch; unlock lever; shaft lock; disc protective cover; power cord. For the convenience of the user, the product is equipped with a side handle. Depending on the requirements of the user, the tool can be installed: an abrasive cutting disc or a grinding disc. The axes of the electric motor and the working part of the tool (disk) are located at an angle of 90° relative to each other. The electric motor converts the electrical energy of the alternating current into the mechanical energy of the disk movement.

Technical characteristics: supply voltage - 230÷240 V/50-60; power consumption - 720 W; speed without load - 11000 rpm; disc diameter - 115 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x V): 265 x 128 x 103 mm. The goods are delivered in a cardboard box. Complete with the goods follow: key, protective casing, side handle, grinding disc.

GRI 1 and 6

The manual tool with a built-in brush electric AC motor and power supply from the electric network with a voltage of 230-240 V /50-60 Hz, is designed for grinding, stripping and cutting materials from metal and stone without using water.

Full description

Structurally consists of the following main elements: complex body with holes; built-in electric brush engine; bearing unit; rotating spindle; shaft locker; locking lever; trigger switch; protective cover of the disc; power cord. For the convenience of the user, the product is equipped with an elongated side handle. The tool provides a smooth start function and constant speed control under load. Depending on the requirements of the user, the tool can be installed: a diamond (grinding) disc, as well as an abrasive cutting disc, disk or cup wire brushes (not included in the supply).

Technical characteristics: power consumption - 1450 W; sound pressure level - 90 dB(A); sound power level - 101 dB(A); speed without load - 9000 rpm; disc diameter - 150 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x V): 390 x 169 x 120 mm. The goods are delivered in a cardboard box. Complete with the goods follow: key, protective casing, side handle, grinding disc.

GRI 1 and 6

The manual tool with a built-in brush electric AC motor and power from the AC electrical network is designed for grinding, stripping and cutting materials from metal and stone without using water.

Full description

Structurally consists of the following main elements: complex body; built-in electric brush engine; bearing unit; spindle; fan to remove debris and dust that occur during operation; trigger switch; lock lever; shaft locker; disc casing; power cord. For the convenience of the user, the product is equipped with a side handle. Depending on the user's requirements, the tool can be installed: abrasive cutting disc, diamond disc, grinding disc, cup or disk wire brushes (not included in the supply). The axes of the electric motor and the working part of the tool (disc, brush, etc.) are located at an angle of 90° relative to each other.

The electric motor converts the electrical energy of alternating current into the mechanical energy of the movement of the disc, brush.

Technical characteristics: power consumption - 2800 W; sound pressure level - 91 dB(A); sound power level - 102 dB(A); speed without load - 6600 rpm; disc diameter - 230 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x B): 506 x 250 x 146 mm. The goods are delivered in a cardboard box. Included with the goods are: key, protective casing, side handle.

GRI 1 and 6

Full description

Structurally consists of the following main elements: complex body with ventilation holes; built-in electric brush engine; bearing unit; rotating spindle; fan to remove debris and dust that occur during operation; switch; shaft locker; protective cover disc; power cord. For the convenience of the user, the product is equipped with a side handle. Depending on the requirements of the user, the tool can be installed: abrasive cutting or diamond discs, cup or disk wire brushes, a head for cutting holes (not included in the supply).

Technical characteristics: supply voltage - 230 V/50-60 Hz; power consumption - 2700 W; sound pressure level - 94 dB(A); sound power level - 102 dB(A); speed without load - 8500 rpm; maximum spindle length - 26 mm; disc diameter - 180 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x B): 461 x 200 x 144 mm. The goods are delivered in a cardboard box. Included with the goods are: key, protective casing, side handle.

GRI 1 and 6

Full description

Technical characteristics: supply voltage - 230÷240 V/50-60 Hz; power consumption - 720 W; sound pressure level - 85 dB(A); sound power level -96 dB(A); speed without load - 11000 rpm; disc diameter - 115 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x B): 266 x 128 x 103 mm. Weight: 1.8 kg. The goods are delivered in a cardboard box. Complete with the goods follow: key, protective casing, side handle, grinding disc.

GRI 1 and 6

The manual tool with a built-in brush electric AC motor and power from the AC electrical network is designed for grinding, stripping and cutting materials from metal and stone without using water.

Full description

Structurally consists of the following main elements: complex body; built-in electric brush engine; bearing unit; spindle; fan to remove debris and dust that occur during operation; trigger switch; lock lever; shaft locker; disc casing; power cord. For the convenience of the user, the product is equipped with an anti-vibration side handle, which can be installed in three positions. Depending on the user's requirements, the tool can be installed, for example, an abrasive cutting disc, diamond disc, grinding disc, cup or disk wire brushes (not included in the supply).

Overall dimensions (D x Sh x B): 506 x 250 x 146 mm. The weight of the goods excluding the delivery kit is 6.3 kg; the weight taking into account the delivery kit in the box is 8.5 kg. The goods are delivered in a cardboard box with identification information. Included with the goods are: protective casing, closed type protective casing, key, anti-vibration side handle.

GRI 1 and 6

The manual tool with a built-in brush electric AC motor and power supply from the 230 V/50-60 Hz electrical network is designed for grinding, stripping and cutting materials from metal and stone without using water.

Full description

Structurally consists of the following main elements: complex body with ventilation holes; built-in electric brush engine; bearing unit; rotating spindle; fan to remove debris and dust that arise in the process of work; trigger switch; lock lever; shaft locker; disc casing; power cord. For the convenience of the user, the product is equipped with a side handle. Depending on the requirements of the user, the tool can be installed: abrasive or cutting discs, a round wire brush (not included in the supply). The tool provides a smooth start function.

Technical characteristics: supply voltage - 230 V/50-60 Hz; power consumption - 2200 W; sound pressure level - 90 dB(A); sound power level - 103 dB(A); speed without load - 6600 rpm; disc diameter - 230 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x V): 473 x 249 x 140 mm. The goods are delivered in a cardboard box. Included with the goods are: key, protective casing, side handle.

GRI 1 and 6

Full description

Structurally consists of the following main elements: complex body with holes; built-in electric brush engine; bearing unit; rotating spindle; shaft locker, switch lever; protective casing of the disc; power cord. For the convenience of the user, the product is equipped with a side handle located at an angle of 20 °. Depending on the requirements of the user, the tool can be installed: a diamond (grinding) disc, as well as an abrasive cutting disc, disk or cup wire brushes (not included in the supply). The axes of the electric motor and the working part of the tool (disc, brush, etc.) are located at an angle of 90° relative to each other.

The electric motor converts the electrical energy of alternating current into the mechanical energy of the movement of the disc, brush.

Technical characteristics: supply voltage 230-240 V/50-60; power consumption - 720 W; sound pressure level - 86 dB(A); sound power level - 97 dB(A); speed without load - 11000 rpm; disc diameter - 125 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x V): 273 x 139 x 106 mm. Weight: 1.9 kg. The goods are delivered in a cardboard box. Complete with the goods follow: key, protective casing, side handle, grinding disc.

GRI 1 and 6

The manual tool with a built-in brush electric AC motor and power supply from the electric network voltage of 230 V/50-60 Hz is designed for grinding, stripping and cutting materials from metals and stone without using water.

Full description

Structurally consists of the following main elements: complex body with ventilation holes; built-in electric brush engine; bearing assembly; spindle; trigger switch; lock lever; shaft lock; protective cover of the disc; power cord. For the convenience of the user, the product is equipped with a side handle, which can be installed in 3 positions. Depending on the requirements of the user, the tool can be installed: an abrasive cutting / grinding disc, a cup or disk wire brush (not included in the delivery). The axes of the electric motor and the working part of the tool (disk, brush) are located at an angle of 90° relative to each other.

The electric motor converts the electrical energy of the alternating current into the mechanical energy of the movement of the disc, brush, etc.

Technical characteristics: supply voltage - 230 V/50-60; power consumption - 2000 W; speed without load - 6600 rpm; disc diameter - 230 mm; spindle thread - M14; length of power cord - 2.5 m.

Overall dimensions (D x Sh x V): 458 x 250 x 139 mm. The goods are delivered in a cardboard box. Included with the goods are: key, protective casing, side handle.

GRI 1 and 6

Full description

Structurally consists of the following main elements: complex body; built-in electric brush engine; bearing unit; rotating spindle; fan to remove debris and dust that occur during operation; switch; lock lever; shaft locker; protective cover of the disc; power cord. For the convenience of the user, the product is equipped with a side handle. Depending on the requirements of the user, the tool can be installed: abrasive cutting or diamond discs, cup or disk wire brushes, a head for cutting holes (not included in the supply).

Technical characteristics: supply voltage - 230 V/50-60 Hz; power consumption - 2000 W; sound pressure level - 97 dB(A); sound power level - 105 dB(A); speed without load - 6600 rpm; maximum spindle length - 26 mm; disc diameter - 230 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x V): 432 x 250 x 132 mm. The goods are delivered in a cardboard box. Included with the goods are: key, protective casing, side handle.

GRI 1 and 6

The manual tool with a built-in brush electric AC motor and power supply from the electric network with a voltage of 220÷240 V / 50÷60 Hz is designed for grinding, stripping (including a wire brush), cutting holes and cutting materials from metals and stone without the use of water.

Full description

Structurally consists of the following main elements: complex housing with ventilation holes; built-in electric brush engine; bearing assembly; spindle; shaft locker; slider switch with locker for continuous use; protective cover of the disc; power cord. For the convenience of the user, the product is equipped with a side handle, which can be installed on both sides. Depending on the requirements of the user, the tool can be installed: an abrasive cutting / diamond disc, a cup or disk wire brush, a head for cutting holes (not included in the supply).

The axes of the electric motor and the working part of the tool (disk, brush) are located at an angle of 90° relative to each other. The electric motor converts the electrical energy of alternating current into the mechanical energy of the movement of the disc, brush, head for cutting holes, etc.

Technical characteristics: supply voltage - 220÷240 V/50÷60 Hz; power consumption - 840 W; speed of rotation without load - 11000 rpm; disc diameter - 125 mm.

Overall dimensions (total length): 271 mm. The goods are delivered in a cardboard box. Included with the goods are: key, protective casing, side handle.

GRI 1 and 6

The manual tool with a built-in brush electric AC motor and power from the electric network voltage of 230-240 V /50-60 Hz, is designed for grinding, stripping, cutting holes and cutting materials from metal and stone without using water.

Full description

Structurally consists of the following main elements: complex housing with holes; built-in electric brush engine; bearing unit; rotating spindle; frequency regulator; shaft lock; slider switch; indicator lamp; lever; protective cover of the disc; power cord. For the convenience of the user, the product is equipped with an anti-vibration side handle. Depending on the requirements of the user, the tool can be installed: a diamond (grinding) disc, as well as an abrasive cutting disc, disk or cup wire brushes (not included in the supply).

The tool provides a function of smooth start and maintain the number of set turns under load. The axes of the electric motor and the working part of the tool (disc, brush, etc.) are located at an angle of 90° relative to each other. The electric motor converts the electrical energy of alternating current into the mechanical energy of the movement of the disc, brush.

Technical characteristics: power consumption - 1900 W; sound pressure level - 93 dB(A); sound power level - 101 dB(A); speed without load - 11500 rpm; grinding disc diameter - 125 mm; power cord length - 4.0 m.

Overall dimensions (D x Sh x B): 326 x 130 x 123 mm. The goods are delivered in a cardboard box. Complete with the goods follow: key, protective casing, side handle, grinding disc.

GRI 1 and 6

Full description

Structurally consists of the following main elements: complex body with holes; built-in electric brush engine; bearing unit; rotating spindle; shaft locker, switch lever; protective casing of the disc; power cord. For the convenience of the user, the product is equipped with a side handle. Depending on the requirements of the user, the tool can be installed: a diamond (grinding) disc, as well as an abrasive cutting disc, disk or cup wire brushes (not included in the supply). The tool provides a smooth start and an eyelet for fastening the cable.

Technical characteristics: power consumption - 1300 W; sound pressure level - 91 dB(A); sound power level - 102 dB(A); speed without load - 11000 rpm; disc diameter - 125 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x B): 325 x 140 x 117 mm. The goods are delivered in a cardboard box. Included with the goods are: key, protective casing (without a key), side handle, grinding disc.

GRI 1 and 6

Full description

Structurally consists of the following main elements: complex body with ventilation holes; built-in electric brush engine; bearing unit; rotating spindle; fan to remove debris and dust that occur during operation; trigger switch; lock lever; shaft lock; protective cover of the disc; power cord. For the convenience of the user, the product is equipped with a side handle. Depending on the requirements of the user, the tool can be installed: abrasive or cutting discs, a round wire brush (not included in the supply). The tool provides a smooth start function.

Technical characteristics: supply voltage - 230 V/50-60 Hz; power consumption - 2200 W; sound pressure level - 90 dB(A); sound power level - 103 dB(A); speed without load - 8500 rpm; disc diameter - 180 mm; length of power cord - 2.5 m.

Overall dimensions (D x Sh x V): 473 x 200 x 140 mm. Weight: 4.7 kg. The goods are delivered in a cardboard box. Included with the goods are: key, protective casing, side handle.

GRI 1 and 6

Full description

Structurally consists of the following main elements: complex housing with holes; built-in electric brush engine; bearing unit; rotating spindle; slider switch; indicator lamp; lever; protective cover of the disc; power cord. For the convenience of the user, the product is equipped with an anti-vibration side handle. Depending on the requirements of the user, the tool can be installed: a diamond (grinding) disc, as well as an abrasive cutting disc, disk or cup wire brushes (not included in the supply). The tool provides a smooth start function.

Overall dimensions (D x Sh x B): 326 x 140 x 123 mm. The goods are delivered in a cardboard box. Complete with the goods follow: key, protective casing, side handle, grinding disc.

GRI 1 and 6

Full description

Structurally consists of the following main elements: complex housing with holes; built-in electric brush engine; bearing unit; rotating spindle; shaft locker; trigger switch; indicator lamp; lock lever; protective cover of the disk; power cord. For the convenience of the user, the product is equipped with an elongated side handle. Depending on the requirements of the user, the tool can be installed: a diamond (grinding) disc, as well as an abrasive cutting disc, disk or cup wire brushes (not included in the supply).

The tool provides an SJS system to protect against jerks, ensuring smooth operation. The axes of the electric motor and the working part of the tool (disc, brush, etc.) are located at an angle of 90° relative to each other. The electric motor converts the electrical energy of alternating current into the mechanical energy of the movement of the disc, brush.

Technical characteristics: power consumption - 1050 W; sound pressure level - 89 dB(A); sound power level - 100 dB(A); speed without load - 10000 rpm; grinding disc diameter - 150 mm; power cord length - 2.5 m.

Overall dimensions (D x Sh x V): 384 x 172 x 120 mm. The goods are delivered in a cardboard box. Complete with the goods follow: key, protective casing, side handle, grinding disc.

GRI 1 and 6

What import requires

Veterinary and sanitary control

Goods fall under supervision by their type and characteristics

Sanitary and epidemiological supervision (control)
rule for the whole chapter 84
Материалы, оборудование, вещества, устройства, применяемые в сфере хозяйственно-питьевого водоснабжения и при очистке сточных вод, в плавательных бассейнах; Продукция машиностроения и приборостроения производственного, медицинского и бытового назначения, кроме запасных частей к транспортным средствам и бытовой технике (за исключением контактирующих с питьевой водой и пищевыми продуктами); Продукция, изделия, являющиеся источником ионизирующего излучения, в том числе генерирующего, а также изделия и продукция (товары), содержащие радиоактивные вещества; Строительное сырье и материалы, в которых гигиеническими нормативами регламентируется содержание радиоактивных веществ, в том числе производственные отходы для повторной переработки и использования в народном хозяйстве, лом черных и цветных металлов (металлолом); Оборудование, материалы для воздухоподготовки, воздухоочистки и фильтрации; Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры
Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

ТР ТС 010/2011Safety of machinery and equipment
- Оборудование гаражное для автотранспортных средств и прицепов — certificate of conformity (part of the heading)
- Инструмент механизированный, в том числе электрический (инструмент ручной) — certificate of conformity (part of the heading)
- Оборудование для вскрышных и очистных работ и крепления горных выработок: комбайны очистные; комплексы механизированные; крепи механизированные для лав; пневмоинструмент — certificate of conformity (part of the heading)
- Оборудование для бурения шпуров и скважин, оборудование для зарядки и забойки взрывных скважин: перфораторы пневматические (молотки бурильные); пневмоударники; станки для бурения скважин в горнорудной промышленности; установки бурильные — certificate of conformity (part of the heading)
- Оборудование и машины строительные — declaration of conformity or certificate of conformity (part of the heading)
ТР ЕАЭС 043/2017About requirements to means of ensuring fire safety and fire extinguishing
- Инструмент для проведения специальных работ на пожарах (предназначенный для применения в качестве средств обеспечения пожарной безопасности и пожаротушения) — declaration of conformity
ТР ТС 020/2011Electromagnetic compatibility of technical means
- шлифовальные машины (в том числе угловые), полировальные машины — certificate of conformity
ТР ЕАЭС 037/2016Restriction of the Use of Hazardous Substances in Electrical and Radio Electronics Products
- шлифмашины, в том числе угловые, полировальные машины — declaration of conformity

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

How it is done in practice

Valid documents in the EAEU unified register for subheading 8467 29: certificates 9,073, declarations 7,358.

By technical regulation: ТР ТС 010/20119,624ТР ТС 020/20119,582ТР ЕАЭС 037/20166,032ТР ТС 004/20113,976ТР ТС 012/20118
Schemes: 1д6,2533с4,7181с4,0524д4493д330The letter after the scheme number shows the form: certification or declaration of conformity.
Most active certification bodies: АО Региональный орган по сертификации и тестированиюТОО «Научно-технический центр электромагнитной совместимости и безопасности информационных систем»ООО «Гильдия Качества»
Manufacturers outside the EAEU: China2,211Germany180United States58Italy52Taiwan43Hong Kong SAR China34

Manufacturers of these goods →Check a supplier’s document by its number →

Payments on import

Duty for this code: 10%. On top of the duty, on import into Russia you pay VAT of 22% of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

Import VAT in EAEU countries

Russia22%Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025)
Kazakhstan16%Tax Code of Kazakhstan, Art. 503(1), from 01.01.2026
Belarus20%Tax Code of Belarus, Art. 122
Armenia20%Tax Code of the Republic of Armenia
Kyrgyzstan12%Tax Code of the Kyrgyz Republic

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

Calculate the whole deal →Quick payment estimate →

The right code is in the HS code search.