8543 70 800 0 — Electrical machines and apparatus, having individual functions, not specified or included elsewhere in this Chapter: other machines and apparatus: other
Electrical machines and apparatus, having individual functions, not specified or included elsewhere in this Chapter: other machines and apparatus: other
Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it
EEC Council Decision No. 80 of 14.09.2021
None: russian bans and restrictions, trade defence measures — duty on top of the tariff, tariff quota.
Whether a measure applies to your goods depends on their characteristics and the shipping documents
Exempt if it is a medical device on the exemption list. Otherwise 22%.
Where it sits in the nomenclature
Section XVI. Machinery and mechanical appliances; electrical equipment; parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
- 85Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles
- 8543Electrical machines and apparatus, having individual functions, n.e.s. in chapter 85 and parts thereof
- 8543 70Electrical machines and apparatus, having individual functions, n.e.s. in chapter 85
- 8543 70 800 0you are here
Explanatory notes to heading 8543 4 paragraphs
Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.
8543 Electrical and apparatus having individual functions, not elsewhere specified or included in this Chapter: 8543 10 – particle accelerators 8543 20 – signal generators 8543 30 – machines and apparatus for electroplating, electrolysis or electrophoresis 8543 70 – machines and apparatus other 8543 90 – parts
This heading covers all electrical appliances and apparatus not falling within any other heading of this Chapter, not more specifically described in any heading of any other group of the Nomenclature, and not excluded by a note to Section XVI or to this Chapter. Essential electrical goods, more specifically described in other groups,
Electrical equipment of Chapter 84 and certain instruments and apparatus of Chapter 90. The electrical equipment and apparatus of this heading shall have individual functions. The provisions of the Explanatory Note to heading 8479 in respect of machinery and mechanical appliances having individual functions are applicable, mutatis mutandis, to the equipment and apparatus of this heading. Most of the equipment of this heading consists of the assembly of electrical goods or parts (electronic lamps, transformers, capacitors, throttles, resistors, etc.) operating entirely on the principle of electricity. However, this heading also includes electrical goods containing mechanical features, provided that such features supplement the electrical function of the machine or equipment. This heading covers, inter alia: (1) Particle accelerators. They are devices for imparting large kinetic energy to charged particles (electrons, protons, etc.). Particle accelerators are used mainly in nuclear research, but they are also used in the manufacture of radioactive materials, in medical and industrial radiography, for the sterilization of certain products, etc. Particle accelerators usually consist of large installations (the weight of which can reach several thousand tons). These include a particle source, an accelerator chamber, and devices for producing high-frequency voltages, flux changes, or radio frequencies that are used to accelerate particles. They may contain one target or more. Acceleration, focusing and deflection of particles are achieved by electrostatic or electromagnetic devices that are powered by high-voltage or high-frequency generators. The accelerator and generators are often enclosed in a radiation shield. The particle accelerators covered by this heading include van de Graaf accelerators, Cockcroft and Walton accelerators, linear accelerators, cyclotrons, betatrons, synchrocyclotrons, synchrotrons, etc. Betatrons and other particle accelerators specially adapted for generating X-rays, including those capable of generating either beta rays or gamma rays, as appropriate, are classified in heading 9022. (2) Signal generators. They are apparatus for obtaining electrical signals of known shape and magnitude at a given frequency (for example, high or low frequency). These include, inter alia, pulse generators, reference generators, swing frequency generators (span generators). (3) Mine detectors, the principle of operation of which is based on a change in the magnetic flux formed in the equipment when approaching a metal object. Similar detectors are used, for example, to detect foreign metal bodies in packages of tobacco, food, forest, etc. and to localize buried pipes. (4) Mixing devices used in sound recording to combine output from two or more microphones; they are sometimes combined with an amplifier. Mixer consoles and equalizers are also included in this heading. But mixing devices specially designed for cinematography are not included in this heading (heading 9010). (5) Noise reduction devices used with sound recording equipment.
(6) De-icers and demisters with electric resistors, for aircraft, vessels, trains or other vehicles (other than cycles or motor vehicles of heading 8512). (7) Synchronisers used where several generators feed a common circuit. (8) Electric mine detonators consisting of a hand generator (self-excited generator) and a capacitor. (9) High or intermediate frequency amplifiers (including measuring amplifiers and aerial amplifiers). (10) Machines and apparatus for electroplating, electrolysis or electrophoresis (other than machines and apparatus of heading 8486 and electrophoresis instruments of heading 9027). (11) Ultra-violet radiation equipment for general industrial use. (12) Electrical equipment for generating and diffusing ozone, for non-therapeutic purposes (e.g., for industrial use, for ozonising premises). (13) Electronic musical modules for incorporation in a wide variety of consumer or other goods, e.g., wrist-watches, cups and greeting cards. These modules generally consist of an electronic integrated circuit, a resistor, a loudspeaker and a mercury cell. They contain fixed musical programmes. (14) Electric fence energisers. (15) Wireless infra-red devices for the remote control of television receivers, video recorders or other electrical equipment. (16) Electroluminescent devices, generally in the form of strips, plates or panels, based on an electroluminescent substance (e.g., zinc sulphide) placed between two layers of conductive material. (17) Digital flight data recorders (black boxes) in the form of a fireproof, shock-resistant electronic device for the continuous recording during flight of specific flight data. The heading excludes: (a) ion implanters for doping semiconductor materials or flat panel materials (heading 8486); (b) apparatus for the physical vapour deposition of metals for the manufacture of semiconductor wafers, semiconductor devices, electronic integrated circuits or flat panel displays (heading 8486); (c) "smart cards" (including cards or tags bearing special markings whose operation is based on proximity), referred to in Note 5 (b) to this Chapter (heading 8523). PARTS Subject to the general provisions regarding the classification of parts (see the General Explanatory Note to Section XVI), parts of the goods of this heading are also classified in this heading.
Official text adopted by a Recommendation of the EEC Board
Notes to chapter 85 — Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles 22 items
Notes
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
1. This group does not include:
(a) blankets, mattresses, pillows, foot warmers, electrically heated or similar articles; clothing, shoes or headphones or other electrically heated articles used by a person;
(b) glass articles of heading 7011;
(c) machinery and apparatus of heading 8486;
(d) vacuum apparatus used in the medical, surgical, dental or veterinary fields of science (heading 9018); or
(e) Electrically heated furniture of Chapter 94.
2. Headings 8501 to 8504 do not cover the goods of heading 8511, 8512, 8540, 8541 or 8542.
However, mercury arc rectifiers with metal reservoirs are classified in heading 8504.
3. For the purposes of heading 8507, the term “electrical accumulators” applies to electric accumulators presented with additional components that contribute to the storage and supply of energy to the battery or protect it from damage, such as electrical connectors, thermostats (e.g., thermistors) and protective devices. They may also include a portion of the protective casing of the goods in which they will be used.
4. Heading 8509 covers only the following types of electromechanical machinery commonly used in household use:
(a) canvases, food grinders, mixers and juicers for fruits or vegetables of any mass;
(b) other machines weighing not more than 20 kg.
Однако данная товарная позиция не включает вентиляторы или вентиляционные или рециркуляционные вытяжные колпаки или шкафы с вентилятором, с фильтрами или без фильтров (товарная позиция 8414), центробежные сушилки для белья (товарная позиция 8421), посудомоечные машины (товарная позиция 8422), бытовые стиральные машины (товарная позиция 8450), валковые или другие гладильные машины (товарная позиция 8420 или 8451), швейные машины (товарная позиция 8452), электрические ножницы (товарная позиция 8467) или электронагревательные приборы (товарная позиция 8516).
5. For the purposes of heading 8517, the term “smartphones” means telephones for cellular communication networks equipped with a mobile operating system designed to perform computer functions, such as the downloading and simultaneous operation of several applications, including third-party applications, whether or not other components, such as digital cameras and navigation systems, are embedded therein.
6. In heading 8523:
(a) “solid state-of-the-art non-volatile storage devices” (e.g., “flash memory cards” or “electronic flash memory cards”) mean connector storage devices comprising one or more flash memory devices (e.g., “Flash ES ROMs”) in the form of integrated circuits installed on a printed circuit board. They may include an integrated circuit controller and discrete passive components such as capacitors and resistors.
(b) the term “smart cards” means cards that have one or more electronic integrated circuits (a microprocessor, randomly sampled memory (ROM) or permanent memory (ROM)) in the form of crystals. These cards may have contacts, a magnetic strip, or a built-in antenna, but they do not contain any other active or passive elements.
7. For the purposes of heading 8524, the expression “flat display panel modules” refers to display devices or apparatus equipped with at least a display screen which are designed to be incorporated into the articles of other headings before use. In shape, the display screens of such modules can be flat, curved, flexible, folding, stretching or other shapes. Flat display panel modules may include additional components, including those necessary for receiving video signals and distributing them across screen pixels. Heading 8524, however, does not include display modules equipped with components for converting video signals (e.g., a video format conversion integrated circuit, a decoder integrated circuit or an application processor) or otherwise having assumed the character of articles of other headings.
In classifying the flat panel modules referred to in this note, heading 8524 takes precedence over any other heading of the Nomenclature.
8. For the purposes of heading 8534, the term “printed circuits” means circuits made by forming on an insulating substrate by any printing process (e.g., electroplating, etching) or by “film” technology of conductors, contacts, or other printed elements (e.g., inductances, resistors, capacitors) individually or in a particular order, with the exception of elements which are capable of producing, straightening, modulating, or amplifying an electrical signal (e.g., semiconductor elements).
The term "printed circuits" does not include circuits combined with elements other than those obtained in the printing process, as well as individual discrete resistors, capacitors or inductors. Printed circuits, however, may be equipped with connecting elements manufactured by a technology other than printing.
Thin or thick-film circuits employing passive and active elements obtained in the same process are classified in heading 8542.
9. For the purposes of heading 8536, the term “connectors for fibers of optical, fiber-optic harnesses or cables” means connectors which simply mechanically connect the ends of optical fibers in a digital link system. They do not perform any other function, such as amplifying, restoring, or changing a signal.
10. Heading 8537 excludes wireless infrared devices for remote control of television receivers or other electrical equipment (heading 8543).
11. For the purposes of heading 8539, the expression “LED light sources” covers:
(a) "LED modules" are electric light sources based on LEDs connected in electrical circuits and containing additional components such as electrical, mechanical, thermal or optical elements. For supply or control of power, these modules also contain discrete active elements, discrete passive elements or articles of heading 8536 or 8542. LED modules (LED) are not equipped with a cap, facilitating installation or replacement in the lamp, and providing mechanical and electrical contact;
(b) "LED lamps" are electrical light sources containing one or more LED modules containing additional components such as electrical, mechanical, thermal or optical elements. The difference between LED modules (LED) and LED lamps (LED) is that the latter have a cap that facilitates installation or replacement in the lamp, and provides mechanical and electrical contact.
12. In headings 8541 and 8542:
(a) (i) “semiconductor devices” means semiconductor devices whose operation is based on a change in their resistance under the action of an electric field or semiconductor-based transducers.
Semiconductor devices may also comprise an assembly of multiple elements, regardless of whether the devices are provided with active and passive auxiliary functions or not.
For the purposes of this definition, “semiconductor-based transducers” are semiconductor-based sensors, semiconductor-based actuators, semiconductor-based resonators, and semiconductor-based generators that are varieties of discrete semiconductor-based devices that perform a given function and are capable of converting any physical or chemical phenomenon or effect into an electrical signal, or an electrical signal into some physical phenomenon or action.
All elements of transducers based on semiconductors are inextricably combined with each other, and can contain inseparably attached to them materials necessary for their design or functioning.
The following expressions have the following meanings:
(1) “semiconductor-based” means created or manufactured on a semiconductor substrate or made of semiconductor materials, in a semiconductor technology in which a semiconductor substrate or material plays an essential and irreplaceable role in the performance by a converter of its function, the operation of which is based on the properties of the semiconductor, including physical, electrical, chemical and optical properties;
(2) “physical or chemical phenomena” refers to phenomena such as pressure, acoustic waves, acceleration, vibration, motion, orientation, stress, magnetic field strength, electric field strength, light, radioactivity, humidity, flow rate, concentration of chemicals, etc.;
(3) "semiconductor-based sensor" is a type of semiconductor device consisting of microelectronic or mechanical structures that are created in the mass or on the surface of the semiconductor and having the function of determining the values of physical or chemical action and their conversion into electrical signals caused by a change in electrical properties or displacement of the mechanical structure.
(4) "semiconductor-based drive" is a type of semiconductor device consisting of microelectronic or mechanical structures that are created in the mass or on the surface of the semiconductor and having the function of converting electrical signals into physical motion;
(5) "semiconductor-based resonator" is a type of semiconductor device consisting of microelectronic or mechanical structures that are created in the mass or on the surface of the semiconductor, and having the function of generating mechanical or electrical oscillations of a given frequency, depending on the physical geometry of these structures responding to an external input signal;
(6) "semiconductor-based generator" is a type of semiconductor device consisting of microelectronic or mechanical structures that are created in the mass or on the surface of the semiconductor and having the function of generating mechanical or electrical oscillations of a given frequency, depending on the physical geometry of these structures;
(ii) "LEDs (LEDs)" are semiconductor devices based on semiconductor materials that convert electrical energy into visible, infrared or ultraviolet radiation, whether electrically connected or unconnected, combined with protective diodes or not combined. The LEDs of heading 8541 do not contain components intended to provide power supply or control power supply.
(b) "electronic integrated circuits":
(i) monolithic integrated circuits in which circuit elements (diodes, transistors, resistors, capacitors, inductances, etc.) are carried out in mass (mainly) and on the surface of a semiconductor or complex semiconductor material (for example, doped silicon, gallium arsenide, silicohermanium, indium phosphide) and are inseparably linked;
(ii) hybrid integrated circuits in which passive elements (resistors, capacitors, inductances, etc.) made by thin- or thick-film technology processes and active elements (diodes, transistors, monolithic integrated circuits, etc.) obtained by semiconductor technology processes are connected into a single inseparable whole by interconnections or connecting cables on a single insulating substrate (glass, ceramics, etc.). Such circuits may also contain discrete components;
(iii) multi-crystal integrated circuits consisting of two or more interconnected monolithic integrated circuits, inseparably combined into a single whole, located or not located on one or more insulating substrates, having or not having a frame with terminals, but containing no other active or passive elements;
(iv) multi-component integrated circuits consisting of one or more monolithic, hybrid or multi-crystal integrated circuits combined with at least one of the following components: silicon-based sensors, silicon-based actuators, silicon-based generators, silicon-based resonators or combinations thereof, or components performing the functions of articles classified in headings 8532, 8533, 8541, or inductors classified in heading 8504, inseparably combined in a single integrative form of a single integrated circuit, carried by means of a connection with a printed terminal or other terminal.
In this definition:
(1) “Components” may be discrete, produced independently, then installed on the rest of the multi-component integrated circuit, or integrated into other components;
(2) “Silicon-based” means that they are made on a silicon substrate, or are made of silicon, or are made on an integrated circuit chip;
(3)(a) “silicon-based sensors” consist of microelectronic or mechanical structures that are created in the mass or on the surface of the semiconductor and have the function of detecting physical or chemical phenomena and converting them into electrical signals caused by a change in electrical properties or displacement of the mechanical structure. “Physical or chemical phenomena” refer to phenomena such as pressure, acoustic waves, acceleration, vibration, motion, orientation, stress, magnetic field strength, electric field strength, light, radioactivity, humidity, flow rate, concentration of chemicals, etc.;
(b) “silicon-based actuators” consist of microelectronic and mechanical structures that are created in the mass or on the surface of the semiconductor and that have the function of converting electrical signals into physical motion;
(c) “silicon-based resonators” are components that consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating mechanical or electrical oscillations of a given frequency depending on the physical geometry of these structures responding to an external input signal;
(d) “silicon-based generators” are active components that consist of microelectronic or mechanical structures that are created in the mass or on the surface of a semiconductor and that have the function of generating mechanical or electrical oscillations of a given frequency depending on the physical geometry of those structures.
In classifying the articles referred to in this note, headings 8541 and 8542 shall take precedence over any other heading of the Nomenclature which may include those articles in accordance with, in particular, their function, with the exception of heading 8523.
Subheading notes
English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.
1. Subheading 8525 81 covers only high-speed television cameras, digital cameras and video camera recorders having one or more of the following characteristics: - writing speed exceeding 0,5 mm per microsecond; - time resolution 50 nanoseconds or less; - frame rate exceeding 225 000 frames per second.
2. In respect of subheading 8525 82, radiation-hardened or radiation-tolerant television cameras, digital cameras and video camera recorders are designed or shielded to enable operation in a high-radiation environment. These cameras are designed to withstand a total radiation dose of at least 50 × 103 Gy(silicon) (5 × 106 RAD (silicon)), without operational degradation.
3. Subheading 8525 83 covers night vision television cameras, digital cameras and video camera recorders which use a photocathode to convert available light to electrons, which can be amplified and converted to yield a visible image. This subheading excludes thermal imaging cameras (generally subheading 8525 89).
4. Subheading 8527 12 covers only cassette-players with built-in amplifier, without built-in loudspeaker, capable of operating without an external source of electric power and the dimensions of which do not exceed 170 mm × 100 mm × 45 mm.
5. For the purposes of subheadings 8549 11 to 8549 19, ‘spent primary cells, spent primary batteries and spent electric accumulators’ are those which are neither usable as such because of breakage, cutting-up, wear or other reasons, nor capable of being recharged.
Additional notes
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
1. Subheadings 8519 20 100 0, 8519 30 000 0 and 8519 89 110 0 do not include sound-reproducing apparatus with a laser reading system.
2. Примечание к субпозиции 4 применимо при внесении соответствующих изменений к подсубпозициям 8519 81 150 0 и 8519 81 650.
3. For the purposes of subheadings 8528 71 150 0 and 8528 71 910 0 only, the term “modem” means devices or equipment which modulate outgoing and demodulate incoming signals, such as V.90 modems or cable modems and other devices which use similar technologies to access the Internet via WLAN, ISDN and Ethernet. Access to the Internet may be limited by the service provider.
The apparatus of these subheadings shall provide for a bidirectional communication process or a bidirectional flow of information in order to facilitate the interactive exchange of information.
Additional notes of the Eurasian Economic Union
Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.
1. For the purposes of subheading 8542 31 100 1, the term “process not exceeding 32 nanometers” means a process for the manufacture of electronic integrated circuits in accordance with the technological standards of which the gates of the logical transistors of a microprocessor do not exceed 32 nanometers. Logical transistors are the main computational elements of a microprocessor that implement all arithmetic and logical operations. The gate is the control element of the transistor. Data on the technological process of manufacturing microprocessors are given in the manufacturer's technical documentation, which may be submitted by its authorized representative in the member states of the Eurasian Economic Union.
2. For the purposes of subheading 8535 90 000 1, the term “passage insulators” means devices attached to the flanges of the compartments of modules forming part of a complete switchgear of an elegasic unit (CSG) and intended to separate gas volumes between these compartments or to combine the various CSG modules into a single gas volume, as well as connections through the electrodes of conductors of the CSGM modules built into the passage insulators among themselves during the assembly of the CSGM. Passage insulators are gas dense and non-gas dense. With the help of gas-dense insulators, the gas volumes of KREE are separated. With the help of non-gas-dense insulators, various CSRE modules are combined into one gas volume. Passage insulators consist of a flange ring, a cast insulator and electrodes poured into the insulator.
EEC classification decisions (2)
Binding in all EAEU member states: if the goods match the description, the decision fixes the code
Портативное устройство для чтения книг в электронном формате
Светодиодная лента (светодиодная планка) ( внесены изменения Решением Коллегии Евразийской экономической комиссииот № 160 от 29.11.2021 )
Classification rulings for this code (42)
Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: voltage - 3 x 660~690 V ± 10%; nominal current - 90 A; nominal power - 75 kW; overall dimensions (W x V x G): 300 x 300 x 510 mm.
The goods are packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: voltage - 3 x 660~690 V ± 10%; nominal current - 130 A; power - 110 kW;
Overall dimensions (W x V x G): 360 x 340 x 490 mm.
The goods are packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: voltage - 3 x 660~690 V ± 10%; nominal current - 70 A; nominal power - 55 kW;
Overall dimensions (W x V x G): 300 x 300 x 500 mm.
The goods are packed in a plywood box.
GRI 1 and 6
Устройство для защиты электрических цепей на напряжение не более 1000 В (параметры: напряжение питания 230 (220)
Full descriptionCollapse description
В, рабочее напряжение 250 – 265 В, максимальная сила тока 15А), представляющее собой устанавливаемый на входе электрической схемы (цепи) стиральной машины сетевой фильтр, изготовленный путем монтажа катушки индуктивности (1 шт.), конденсаторов (3 шт.), резистора (1 шт.), предохранителя (1 шт.), варистора (1 шт.) на печатной плате, помещенной затем в полимерный корпус и залитой компаундом; для подсоединения проводов к фильтру в его конструкции имеются два разъема. Резонансная схема вара, которую образуют дроссели (катушки индуктивности), конденсаторы и резистор, защищает электрическую цепь стиральной машины от высокочастотных помех из питающей сети, а также питающую сеть (как следствие, электрические цепи работающих вблизи электроприборов) от возникающих при работе электродвигателя стиральной машины высокочастотных помех (гармоник), отрицательное воздействие которых на электрические цепи происходит в виде скачков, перепадов и резкого падения напряжения.
Сетевой фильтр стиральных машин, выполняя функцию защиты электрических цепей от указанных всплесков напряжения, обеспечивает нормальные процессы работы как стиральной машины, так и иных функционирующих вблизи электроприборов. Плавкий предохранитель в составе фильтра разрывает электрическую цепь питающего напряжения при аварийном режиме в электрической цепи машины.
GRI 1 and 6
Устройство для защиты электрических цепей на напряжение не более 1000 В (параметры: напряжение питания 230 (220)
Full descriptionCollapse description
В, рабочее напряжение 250 – 265 В, максимальная сила тока 15А), представляющее собой устанавливаемый на входе электрической схемы (цепи) стиральной машины сетевой фильтр, изготовленный путем монтажа катушки индуктивности (1 шт.), конденсаторов (3 шт.), резистора (1 шт.), предохранителя (1 шт.), варистора (1 шт.) на печатной плате, помещенной затем в полимерный корпус и залитой компаундом; для подсоединения проводов к фильтру в его конструкции имеются два разъема. Резонансная схема вара, которую образуют дроссели (катушки индуктивности), конденсаторы и резистор, защищает электрическую цепь стиральной машины от высокочастотных помех из питающей сети, а также питающую сеть (как следствие, электрические цепи работающих вблизи электроприборов) от возникающих при работе электродвигателя стиральной машины высокочастотных помех (гармоник), отрицательное воздействие которых на электрические цепи происходит в виде скачков, перепадов и резкого падения напряжения.
Сетевой фильтр стиральных машин, выполняя функцию защиты электрических цепей от указанных всплесков напряжения, обеспечивает нормальные процессы работы как стиральной машины, так и иных функционирующих вблизи электроприборов. Плавкий предохранитель в составе фильтра разрывает электрическую цепь питающего напряжения при аварийном режиме в электрической цепи машины.
GRI 1 and 6
Устройство для защиты электрических цепей на напряжение не более 1000 В (параметры: напряжение питания 230 (220)
Full descriptionCollapse description
В, рабочее напряжение 250 – 265 В, максимальная сила тока 15А), представляющее собой устанавливаемый на входе электрической схемы (цепи) стиральной машины сетевой фильтр, изготовленный путем монтажа катушки индуктивности (1 шт.), конденсаторов (3 шт.), резистора (1 шт.), предохранителя (1 шт.), варистора (1 шт.) на печатной плате, помещенной затем в полимерный корпус и залитой компаундом; для подсоединения проводов к фильтру в его конструкции имеются два разъема. Резонансная схема вара, которую образуют дроссели (катушки индуктивности), конденсаторы и резистор, защищает электрическую цепь стиральной машины от высокочастотных помех из питающей сети, а также питающую сеть (как следствие, электрические цепи работающих вблизи электроприборов) от возникающих при работе электродвигателя стиральной машины высокочастотных помех (гармоник), отрицательное воздействие которых на электрические цепи происходит в виде скачков, перепадов и резкого падения напряжения.
Сетевой фильтр стиральных машин, выполняя функцию защиты электрических цепей от указанных всплесков напряжения, обеспечивает нормальные процессы работы как стиральной машины, так и иных функционирующих вблизи электроприборов. Плавкий предохранитель в составе фильтра разрывает электрическую цепь питающего напряжения при аварийном режиме в электрической цепи машины.
GRI 1 and 6
Устройство для защиты электрических цепей на напряжение не более 1000 В (параметры: напряжение питания 230 (220)
Full descriptionCollapse description
В, рабочее напряжение 250 – 265 В, максимальная сила тока 15А), представляющее собой устанавливаемый на входе электрической схемы (цепи) стиральной машины сетевой фильтр, изготовленный путем монтажа катушки индуктивности (1 шт.), конденсаторов (3 шт.), резистора (1 шт.), предохранителя (1 шт.), варистора (1 шт.) на печатной плате, помещенной затем в полимерный корпус и залитой компаундом; для подсоединения проводов к фильтру в его конструкции имеются два разъема. Резонансная схема вара, которую образуют дроссели (катушки индуктивности), конденсаторы и резистор, защищает электрическую цепь стиральной машины от высокочастотных помех из питающей сети, а также питающую сеть (как следствие, электрические цепи работающих вблизи электроприборов) от возникающих при работе электродвигателя стиральной машины высокочастотных помех (гармоник), отрицательное воздействие которых на электрические цепи происходит в виде скачков, перепадов и резкого падения напряжения.
Сетевой фильтр стиральных машин, выполняя функцию защиты электрических цепей от указанных всплесков напряжения, обеспечивает нормальные процессы работы как стиральной машины, так и иных функционирующих вблизи электроприборов. Плавкий предохранитель в составе фильтра разрывает электрическую цепь питающего напряжения при аварийном режиме в электрической цепи машины.
GRI 1 and 6
Устройство для защиты электрических цепей на напряжение не более 1000 В (параметры: напряжение питания 230 (220)
Full descriptionCollapse description
В, рабочее напряжение 250 – 265 В, максимальная сила тока 15А), представляющее собой устанавливаемый на входе электрической схемы (цепи) стиральной машины сетевой фильтр, изготовленный путем монтажа катушки индуктивности (1 шт.), конденсаторов (3 шт.), резистора (1 шт.), предохранителя (1 шт.), варистора (1 шт.) на печатной плате, помещенной затем в полимерный корпус и залитой компаундом; для подсоединения проводов к фильтру в его конструкции имеются два разъема. Резонансная схема вара, которую образуют дроссели (катушки индуктивности), конденсаторы и резистор, защищает электрическую цепь стиральной машины от высокочастотных помех из питающей сети, а также питающую сеть (как следствие, электрические цепи работающих вблизи электроприборов) от возникающих при работе электродвигателя стиральной машины высокочастотных помех (гармоник), отрицательное воздействие которых на электрические цепи происходит в виде скачков, перепадов и резкого падения напряжения.
Сетевой фильтр стиральных машин, выполняя функцию защиты электрических цепей от указанных всплесков напряжения, обеспечивает нормальные процессы работы как стиральной машины, так и иных функционирующих вблизи электроприборов. Плавкий предохранитель в составе фильтра разрывает электрическую цепь питающего напряжения при аварийном режиме в электрической цепи машины.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: voltage - 3 x 660~690 V ± 10%; nominal current - 350 A; power - 280/315 kW;
Overall dimensions (W x V x G): 420 x 440 x 520 mm.
The goods are packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The main components of the goods are inductive (L) and capacitive (C) elements installed in the housing. The elements are selected at the nominal current of the frequency converter in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The inductive resistance of the coil is directly proportional to the frequency of the current passing through it, and the higher the frequency of the current, the more resistance it exerts to the current, i.e. it delays alternating currents at higher frequencies and more easily passes currents with lower frequencies.
The condenser, on the contrary, the higher the frequency of the current, the easier the current passes through it, and the lower the frequency of the current, the greater the obstacle to the passage of current it is. Thus, due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range - 3 x 380~480 V - 15% / + 10%; network frequency - 50/60 Hz ± 5%; nominal current - 38 A; inductance (total) - 1.42 mGN; capacity (total) - 10 μF.
Overall dimensions (width x height x depth, in mm): 240 x 269 x 150. Weight: 19 kg. The goods are delivered packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The main components of the goods are inductive (L) and capacitive (C) elements installed in the housing. The elements are selected at the nominal current of the frequency converter in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The inductive resistance of the coil is directly proportional to the frequency of the current passing through it, and the higher the frequency of the current, the more resistance it exerts to the current, i.e. it delays alternating currents at higher frequencies and more easily passes currents with lower frequencies.
The condenser, on the contrary, the higher the frequency of the current, the easier the current passes through it, and the lower the frequency of the current, the greater the obstacle to the passage of current it is. Thus, due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range - 3 x 380~480 V - 15% / + 10%; network frequency - 50/60 Hz ± 5%; nominal current - 48 A; inductance (total) - 1.13 mGN; capacity (total) - 15 μF.
Overall dimensions (width x height x depth, in mm): 240 x 269 x 160. Weight: 20 kg. The goods are delivered packed in a plywood box.
GRI 1 and 6
A device designed to change the pulsed form of the output voltage signal of the frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The main components of the goods are inductive (L) and capacitive (C) elements installed in the housing. The elements are selected at the nominal current of the frequency converter in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The inductive resistance of the coil is directly proportional to the frequency of the current passing through it, and the higher the frequency of the current, the greater the resistance to the current it exerts, i.e., it delays alternating currents at higher frequencies and more easily passes currents with lower frequencies.
The condenser, on the contrary, the higher the frequency of the current, the easier the current passes through it, and the lower the frequency of the current, the greater the obstacle to the passage of current it is. Thus, due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range - 3 x 380~480 V -15% / + 10%; network frequency - 50/60 Hz ± 5%; nominal current - 17 A; inductance (total) - 3 mGN; capacity (total) - 10 μF.
Overall dimensions (width x height x depth): 180 x 230 x 103 mm Mass: 8 kg. The goods are delivered packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The main components of the goods are inductive (L) and capacitive (C) elements installed in the housing. The elements are selected at the nominal current of the frequency converter in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The inductive resistance of the coil is directly proportional to the frequency of the current passing through it, and the higher the frequency of the current, the more resistance it exerts to the current, i.e. it delays alternating currents at higher frequencies and more easily passes currents with lower frequencies.
The condenser, on the contrary, the higher the frequency of the current, the easier the current passes through it, and the lower the frequency of the current, the greater the obstacle to the passage of current it is. Thus, due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range - 3 x 380~480 V - 15% / + 10%; network frequency - 50/60 Hz ± 5%; nominal current - 4.5 A; inductance (total) - 10.61 mG; capacity (total) - 3 μF.
Overall dimensions (width x height x depth, in mm): 150 x 192 x 85. Weight 3.1 kg. The goods are delivered packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The main components of the goods are inductive (L) and capacitive (C) elements installed in the housing. The elements are selected at the nominal current of the frequency converter in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The inductive resistance of the coil is directly proportional to the frequency of the current passing through it, and the higher the frequency of the current, the more resistance it exerts to the current, i.e. it delays alternating currents at higher frequencies and more easily passes currents with lower frequencies.
The condenser, on the contrary, the higher the frequency of the current, the easier the current passes through it, and the lower the frequency of the current, the greater the obstacle to the passage of current it is. Thus, due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range - 3 x 380~480 V - 15% / + 10%; network frequency - 50/60 Hz ± 5%; nominal current - 32 A; inductance (total) - 1.42 mGN; capacity (total) - 10 μF.
Overall dimensions (width x height x depth, in mm): 200 x 290 x 190. Weight: 11 kg. The goods are delivered packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The main components of the goods are inductive (L) and capacitive (C) elements installed in the housing. The elements are selected at the nominal current of the frequency converter in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The inductive resistance of the coil is directly proportional to the frequency of the current passing through it, and the higher the frequency of the current, the more resistance it exerts to the current, i.e. it delays alternating currents at higher frequencies and more easily passes currents with lower frequencies.
The condenser, on the contrary, the higher the frequency of the current, the easier the current passes through it, and the lower the frequency of the current, the greater the obstacle to the passage of current it is. Thus, due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range - 3 x 380~480 V -15% / + 10%; network frequency - 50/60 Hz ± 5%; nominal current - 8 A; inductance (total) - 5.97 mGN; capacity (total) - 7 μF.
Overall dimensions (width x height x depth, in mm): 150 x 190 x 90. Weight is 6 kg. The goods are delivered packed in a plywood box.
GRI 1 and 6
An electrical device designed to change the pulsed form of the voltage output signal of a frequency converter into a smooth sine waveform of a signal entering the windings of a connected electric motor in order to protect its isolation, increase its service life, and reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The product is equipped with a housing, is an LC-chain, in which the main components are inductive (L) and capacitive (C) elements, selected according to the value of the nominal current of the frequency converter, i.e. depending on its type size.
The principle of operation of goods is based on the properties of inductances and containers to behave differently in AC circuits. The reactive resistance of inductance is directly proportional to the frequency of the flowing alternating current, and the higher the frequency of the current, the greater the resistance of inductance it exerts, delaying currents at higher frequencies and more easily passing currents with lower frequencies. The condenser, on the contrary, the higher the frequency of the current, the easier it is for a given current to flow through it, and the lower the frequency of the current, the greater the obstacle to the flow of current it is.
Due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a smooth sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range (T4) - 3 x 380~480 V -15% / + 10%; network frequency -50/60 Hz ± 5%; current - 260 A; total inductance -0.214 mG; total capacity - 108 μF.
Overall dimensions (width x height x depth, in mm): 360 x 320 x 345. Weight - 110 kg. The goods are delivered packed in a plywood box.
GRI 1 and 6
An electrical device designed to change the pulsed form of the voltage output signal of a frequency converter into a smooth sine waveform of a signal entering the windings of a connected electric motor in order to protect its isolation, increase its service life, and reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The product is equipped with a housing, is an LC-chain, in which the main components are inductive (L) and capacitive (C) elements, selected according to the value of the nominal current of the frequency converter, i.e. depending on its type size.
The principle of operation of goods is based on the properties of inductances and containers to behave differently in AC circuits. The reactive resistance of inductance is directly proportional to the frequency of the flowing alternating current, and the higher the frequency of the current, the greater the resistance of inductance it exerts, delaying currents at higher frequencies and more easily passing currents with lower frequencies. The condenser, on the contrary, the higher the frequency of the current, the easier it is for a given current to flow through it, and the lower the frequency of the current, the greater the obstacle to the flow of current it is.
Due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a smooth sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range (T4) - 3 x 380~480 V -15% / +10%; network frequency -50/60 Hz ± 5%; current - 115 A; total inductance -0.471 mG; total capacity - 50 μF.
Overall dimensions (width x height x depth, in mm): 300 x 365 x 237. Weight - 60 kg. The goods are delivered packed in a plywood box.
GRI 1 and 6
An electrical device designed to change the pulsed form of the voltage output signal of a frequency converter into a smooth sine waveform of a signal entering the windings of a connected electric motor in order to protect its isolation, increase its service life, and reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The main components of the product are inductive (L) and capacitive (C) elements, which are selected according to the value of the nominal current of the frequency converter, i.e. depending on its type size.
The principle of operation of goods is based on the properties of inductive and capacitive elements to behave differently in AC circuits. The reactive resistance of inductance is directly proportional to the frequency of the flowing alternating current, and the higher the frequency of the current, the greater the resistance to the flowing current, the inductance exerts, i.e. it delays currents at higher frequencies and more easily passes currents with lower frequencies. The capacitive element (capacitor) in AC circuits behaves differently, i.e. the higher the frequency of the current, the easier it is for this current to flow through it, and the lower the frequency of the current, the greater the obstacle to the flow of current is the capacitive element.
Due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a smooth sine waveform signal at the output of the device. The product is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range (T4) - 3 x 380~480 V -15% / +10%; network frequency -50/60 Hz ± 5%; current - 62 A; total inductance - 0.873 mH; total capacity -25 μF.
Overall dimensions (width x height x depth, in mm): 300 x 285 x 232. The goods are delivered in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: output voltage - 3 x 380~480 V -15% / +10% V; nominal current - 660 A; inductance - 0,096 mG; capacity - 216 μF.
Overall dimensions (W x V x G): 480 x 455 x 466 mm.
The goods are packed in a plywood box.
GRI 1 and 6
An electrical device designed to change the pulsed form of the voltage output signal of a frequency converter into a smooth sine waveform of a signal entering the windings of a connected electric motor in order to protect its isolation, increase its service life, and reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The product is equipped with a housing, is an LC-chain, in which the main components are inductive (L) and capacitive (C) elements, selected according to the value of the nominal current of the frequency converter, i.e. depending on its type size.
The principle of operation of goods is based on the properties of inductances and containers to behave differently in AC circuits. The reactive resistance of inductance is directly proportional to the frequency of the flowing alternating current, and the higher the frequency of the current, the greater the resistance of inductance it exerts, delaying currents at higher frequencies and more easily passing currents with lower frequencies. The condenser, on the contrary, the higher the frequency of the current, the easier it is for a given current to flow through it, and the lower the frequency of the current, the greater the obstacle to the flow of current it is.
Due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a smooth sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range (T4) - 3 x 380~480 V -15% / +10%; network frequency -50/60 Hz ± 5%; current - 72 A; total inductance -0.752 mH; total capacity - 19 μF.
Overall dimensions (width x height x depth, in mm): 300 x 300 x 232. Weight: 36 kg. The goods are delivered packed in a plywood box.
GRI 1 and 6
An electrical device designed to change the pulsed form of the voltage output signal of a frequency converter into a smooth sine waveform of a signal entering the windings of a connected electric motor in order to protect its isolation, increase its service life, and reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The product is equipped with a housing, is an LC-chain, in which the main components are inductive (L) and capacitive (C) elements, selected according to the value of the nominal current of the frequency converter, i.e. depending on its type size.
The principle of operation of goods is based on the properties of inductances and containers to behave differently in AC circuits. The reactive resistance of inductance is directly proportional to the frequency of the flowing alternating current, and the higher the frequency of the current, the greater the resistance of inductance it exerts, delaying currents at higher frequencies and more easily passing currents with lower frequencies. The condenser, on the contrary, the higher the frequency of the current, the easier it is for a given current to flow through it, and the lower the frequency of the current, the greater the obstacle to the flow of current it is.
Due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a smooth sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range (T4) - 3 x 380~480 V -15% / + 10%; network frequency -50/60 Hz ± 5%; current - 24 A; the value of the total inductance -2.12 mG; the value of the total capacity - 10 μF.
Overall dimensions (width x height x depth, in mm): 180 x 230 x 122. Weight - 11 kg. The goods are delivered packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: output voltage - 3 x 380~480 V -15% / +10% V; nominal current - 410 A; inductance - 0.145 mG; capacity - 144 μF.
Overall dimensions (W x V x G): 430 x 415 x 390 mm.
The goods are packed in a plywood box.
GRI 1 and 6
An electrical device designed to change the pulsed form of the voltage output signal of a frequency converter into a smooth sine waveform of a signal entering the windings of a connected electric motor in order to protect its isolation, increase its service life, and reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The product is equipped with a housing, is an LC-chain, in which the main components are inductive (L) and capacitive (C) elements, selected according to the value of the nominal current of the frequency converter, i.e. depending on its type size.
The principle of operation of goods is based on the properties of inductances and containers to behave differently in AC circuits. The reactive resistance of inductance is directly proportional to the frequency of the flowing alternating current, and the higher the frequency of the current, the greater the resistance of inductance it exerts, delaying currents at higher frequencies and more easily passing currents with lower frequencies. The condenser, on the contrary, the higher the frequency of the current, the easier it is for a given current to flow through it, and the lower the frequency of the current, the greater the obstacle to the flow of current it is.
Due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a smooth sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range (T4) - 3 x 380~480 V-15% / + 10%; network frequency -50/60 Hz ± 5%; current - 1200A; total inductance - 0.065 mGN; total capacity - 400 μF.
Overall dimensions (width x height x depth, in mm): 620 x 690 x 542. The goods are delivered packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: output voltage - 3 x 380~480 V -15% / +10% V; nominal current - 480 A; inductance - 0.126 mG; capacity - 144 μF.
Overall dimensions (W x V x G): 430 x 420 x 410 mm.
The goods are packed in a plywood box.
GRI 1 and 6
An electrical device designed to change the pulsed form of the voltage output signal of a frequency converter into a smooth sine waveform of a signal entering the windings of a connected electric motor in order to protect its isolation, increase its service life, and reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The product is equipped with a housing, is an LC-chain, in which the main components are inductive (L) and capacitive (C) elements, selected according to the value of the nominal current of the frequency converter, i.e. depending on its type size.
The principle of operation of goods is based on the properties of inductances and containers to behave differently in AC circuits. The reactive resistance of inductance is directly proportional to the frequency of the flowing alternating current, and the higher the frequency of the current, the greater the resistance of inductance it exerts, delaying currents at higher frequencies and more easily passing currents with lower frequencies. The condenser, on the contrary, the higher the frequency of the current, the greater the resistance of inductance it exerts, delaying currents at higher frequencies and more easily passing currents with lower frequencies.
The condenser, on the contrary, the higher the frequency of the current, the easier it is for a given current to flow through it, and the lower the frequency of the current, the greater the obstacle to the flow of current it is. Due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a smooth sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range (T4) - 3 x 380~480 V -15% / + 10%; network frequency - 50/60 Hz ± 5%; current - 880A; the value of the total inductance - 0.08 mH; the value of the total capacity - 288 μF.
Overall dimensions (width x height x depth, in mm): 530 x 490 x 533. The goods are delivered packed in a plywood box.
GRI 1 and 6
The electrical device is used during manicure work to cure the UV-curing composition in the form of a gel applied to the nail plates.
Full descriptionCollapse description
The device consists of the following main elements: a rectangular ABS plastic case with smoothed shape angles and a hole for placing inside the hand; a panel with ultraviolet diodes placed in the inner cavity of the device; a segmental LED display; control/power switching buttons; a removable metal bottom; magnets for mounting a removable metal bottom; an electronic control board (integral control circuit, transistors, capacitors, resistors, piezoelectric sound emitter); an infrared power sensor; a timerator; an indoor device.
Principle of operation: diodes convert electrical energy into ultraviolet radiation, under the action of which the reaction of photopolymerization (hardening) of the gel applied to the nail plates, containing special photoinitiators that react to ultraviolet radiation, is launched.
The main technical characteristics: the number of LEDs 36 pcs., power voltage 100-240 V, current frequency 50/60 Hz, current strength 1 A, rated power 36 W; wavelength of UV radiation 365 nm and 400 nm, UV radiation intensity 17450 μW / cm2, weight 650 g., coating curing timer 10/30/60/90 seconds, dimensions 220x220x85.5 mm. It comes in an individual cardboard box with user instructions and guidance.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: output voltage - 3 x 380~480 V; nominal current - 180 A; inductance - 0.327 mG; capacity - 0.000075 NF.
Overall dimensions (D x Sh x G): 360 x 315 x 300 mm Weight - 77 kg. The goods are delivered packed in a plywood box.
GRI 1 and 6
The electrical device is used in manicure and pedicure work to cure the UV-curing composition in the form of a gel (varnish) applied to the nail plates.
Full descriptionCollapse description
The device operates from an alternating current electrical network. If necessary, the device can operate from a built-in battery. The device consists of the following main elements: a rectangular ABS plastic case with smoothed shape angles and niches for the arrangement of the hand / foot; a panel with ultraviolet diodes placed in the inner cavity of the device; a segmental LED display; control buttons / power on; a removable metal bottom; magnets for fastening the removable metal bottom; an electronic control board (integral control circuit, transistors, capacitors, resistors, piezoelectric power supply device); a battery-infring device (infring device); a timeration device);
Principle of operation: diodes convert electrical energy into ultraviolet radiation, under the action of which the reaction of photopolymerization (hardening) of the gel (varnish) applied to the nail plates, containing special photoinitiators that react to ultraviolet radiation, is launched.
Main technical characteristics: number of LEDs 36 pcs, rated power of 36 W, peak wavelength 365 nm + 405 nm intensity of UV radiation 17450 μW/cm2, weight 890 grams, timer curing the coating 10/30/60/90 seconds, dimensions 220x220x85.5 mm, for the power adapter(s): AC input voltage 100-240 V, 50/60 Hz, 0.8 A/DC output voltage 18 V, 1.33 A, battery voltage 16.8 V DC, battery capacity 2600 mAh (4 units 2600 mAh, 4.2 V), battery life up to 3.5 hours, Charging time is about 2 hours. It comes in an individual cardboard box with a user guide and a warranty card.
GRI 1 and 6
The electrical device is used in manicure and pedicure work to cure the UV-curing composition in the form of a gel (varnish) applied to the nail plates.
Full descriptionCollapse description
The device operates from an AC electrical network and consists of the following main elements: a rectangular ABS plastic body with smoothed shape angles and a niche for the location of the hand / foot; a panel with ultraviolet diodes placed in the inner cavity of the device; a segment LED display; control buttons / power on; a removable metal bottom; magnets for fastening the removable metal bottom; an electronic control board (integrated control circuit, transistors, capacitors, resistors; an infrared power transmitter; a timerator / power sensor);
Principle of operation: diodes convert electrical energy into ultraviolet radiation, under the action of which the reaction of photopolymerization (hardening) of the gel (varnish) applied to the nail plates, containing special photoinitiators that react to ultraviolet radiation, is launched.
Main technical characteristics: number of LEDs 36 pcs., rated power 36 W; peak wavelength 365 nm + 405 nm, intensity of UV radiation 17450 μW / cm2, weight 650 g., timer curing coating 10/30/60/90 seconds, dimensions 220x220x85.5 mm, for adapter (block) power: input voltage alternating current 100-240 V, 50/60 Hz, 1 A / output voltage of direct current 24 V, 1.5 A. It comes in an individual cardboard box with a user guide and a warranty card.
GRI 1 and 6
Machine for applying a thin coating on glass by vacuum (magnetron) spraying.
Full descriptionCollapse description
The machine consists of the following components: router, water cooling system (including cooling tower), water treatment system (demineralization), ACS (control system). In the router, a thin coating on the glass is applied by vacuum (magnetron) spraying. The water cooling system is designed to remove heat generated in the coating chamber through the aqueous medium and complete the cooling process outside the chamber. The water treatment (demineralization) system is designed to maintain a certain water-chemical regime and prevent negative effects on devices and pipelines.
Automatic control of the machine is carried out by a single control system. The machine is supplied in disassembled form with a set of fasteners, mounting elements, electrical connections necessary for installation. The package does not include spare parts and tools.
GRI 1, 2(a) and 6
A harmonic filter is a device that includes passive elements (coils of inductance and capacitors) in a metal housing, without the use of measuring devices.
Full descriptionCollapse description
Designed to reduce the current of harmonics transmitted to the supply network by a frequency converter with a 6-pulse rectifier, which is a nonlinear load. Reducing the current of harmonics helps to reduce the content of higher harmonics of current in the supply network and ensure the shape of the consumed current, more close to the sinusoidal, which is aimed at reducing voltage distortion to protect electrical equipment from the negative effects of harmonics created by nonlinear loads. The principle of the harmonic filter is based on the frequency dependence of the reactive resistance of inductive and capacitive elements.
The inductive resistance of the coil increases with increasing frequency: the higher the frequency of the current, the greater the resistance inductance exerts on its passage. The capacitor, on the contrary, has a capacitive resistance, which decreases with increasing frequency: high-frequency components of the current pass through it more easily than low-frequency ones. Thus, due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a sinusoidal signal at the output of the device.
Supplied in assembled form.
The package includes a harmonic filter and a packaging box. Upon request, a manual and technical passport are provided electronically. It is installed stationaryly in the electrical circuit between the feeding three-phase network of industrial frequency and the input power terminals of the frequency converter. Installation is carried out inside the distribution cabinet or in the immediate vicinity of the frequency converter in a well-ventilated room provided for by the power supply project.
Technical characteristics: operating voltage range - 380-415 V; network frequency - 50 Hz, ±2.5%; power 5.5 kW, input current 12.6 A, nominal current 14 A.
Overall dimensions: height 376 mm, width 190.5 mm, depth 205 mm. Weight 21 kg.
GRI 1 and 6
A remote control is an electronic device in a plastic case designed to transmit predefined control commands to television media centers.
Full descriptionCollapse description
Instructions are transmitted via an infrared interface with a carrier frequency of 38 kHz or via Bluetooth in the 2.4 GHz band, both interfaces are used as alternative technical methods for transmitting the same button commands. The controls are made in the form of a fixed set of buttons, each of which corresponds to a predetermined remote control command. The product performs the functions of switching on / off the media center, navigation on the screen, volume control, channel switching, voice commands transmission through a built-in microphone.
The remote consists of a case with a keyboard, printed circuit board, microcontroller, built-in microphone, infrared emitter, Bluetooth module and power source.
Technical characteristics: the number of buttons - 30 pcs, LED, the number of batteries - 2 pcs, standard AAA 1.5 V, there is a learning function - trainable buttons four: TV, Mute, Volume +, Volume -. The product is not intended for general purpose wireless communication, transfer of user files, text data, general purpose audio and video streams or exchange of information between devices. The remote is placed in a package size of 7.2 x 21 cm. Then it is packed in a cardboard box with separators of 120 pieces in one box.
Box sizes: D 591(±2) mm, Sh 290(±2) mm, B 230(±2) mm.
GRI 1 and 6
A remote control is an electronic device in a plastic case designed to transmit predetermined remote control commands to television media centers.
Full descriptionCollapse description
Instructions are transmitted via an infrared interface with a carrier frequency of 38 kHz or via Bluetooth in the range of 2.4-2.4835 GHz, both interfaces are used as alternative technical methods for transmitting the same button commands. The controls are made in the form of a fixed set of buttons, each of which corresponds to a predetermined remote control command. The product performs the functions of switching on / off the media center, navigation on the screen, volume control, channel switching, calling service functions, playback control.
The remote consists of a case with a keyboard, printed circuit board, microcontroller, infrared emitter, Bluetooth module and power source. Technical specifications: the number of buttons – 45 pcs, LED, the number of batteries – 2 pcs, standard AAA 1.5 V, there is a training function. The product is not intended for general purpose wireless communication, transfer of user files, data, audio and video streams or exchange of information between devices. The remote is placed in a package size of 7.2 x 21 cm. Then it is packed in a cardboard box with separators of 120 pieces in one box.
Box sizes: D 591(±2) mm, Sh 290(±2) mm, B 230(±2) mm.
GRI 1 and 6
The electrical device is designed to reduce the current of harmonics and bring it closer to the sinusoidal form.
Full descriptionCollapse description
The device is a passive electrical filter, does not change the main frequency and rated voltage of the network. The transformation consists in changing the harmonic composition of the current by arresting and selective absorption (bypass) of currents of higher frequencies (harmonics). The product is a device of passive elements (coils of inductance and capacitors) in a metal case, does not contain measuring devices. The principle of the passive harmonic filter is based on the frequency dependence of the reactive resistance of inductive and capacitive elements.
The inductive resistance of the coil increases with increasing frequency: the higher the frequency of the current, the greater the resistance inductance exerts on its passage. The capacitor, on the contrary, has a capacitive resistance, which decreases with increasing frequency: high-frequency components of the current pass through it more easily than low-frequency ones. Due to this, harmonics effectively “closed” through the filter elements, without entering the feeding network. The parameters of this circuit depend on the frequency of the supply network for which the harmonic filter is intended, so the parameters of the circuit for a 50 Hz network differ from the parameters of the circuit for a 60 Hz network.
The filter is installed between the power supply and the frequency converter of the control electric motor.
Technical characteristics: nominal voltage - 3 x 400 (380-415) V; frequency - 50 Hz; nominal current - 3A; total coefficient of harmonic distortion - 10%.
Overall dimensions (W x V x G): 378 x 568.5 x 275 mm. The goods are packaged in a cardboard box.
GRI 1 and 6
The electrical device is designed to reduce the current of harmonics and bring it closer to the sinusoidal form.
Full descriptionCollapse description
The device is a passive electrical filter, does not change the main frequency and rated voltage of the network. The transformation consists in changing the harmonic composition of the current by arresting and selective absorption (bypass) of currents of higher frequencies (harmonics). The product is a device of passive elements (coils of inductance and capacitors) in a metal case, does not contain measuring devices. The principle of the passive harmonic filter is based on the frequency dependence of the reactive resistance of inductive and capacitive elements.
The inductive resistance of the coil increases with increasing frequency: the higher the frequency of the current, the greater the resistance inductance exerts on its passage. The capacitor, on the contrary, has a capacitive resistance, which decreases with increasing frequency: high-frequency components of the current pass through it more easily than low-frequency ones. Due to this, harmonics effectively “closed” through the filter elements, without entering the feeding network. The parameters of this circuit depend on the frequency of the supply network for which the harmonic filter is intended, so the parameters of the circuit for a 50 Hz network differ from the parameters of the circuit for a 60 Hz network.
The filter is installed between the power supply and the frequency converter of the control electric motor.
Technical characteristics: nominal voltage - 3 x 400 (380-415) V; frequency - 50 Hz; nominal current - 3A; total coefficient of harmonic distortion - 10%.
Overall dimensions (W x V x G): 378 x 568.5 x 275 mm. The goods are packaged in a cardboard box.
GRI 1 and 6
Ультрафиолетовая установка для обеззараживания (дезинфекции) воды небытового (промышленного) назначения предназначена для физического обеззараживания воды потокового типа в небытовых системах водоподготовки (системы водоподготовки плавательных бассейнов и СПА, предварительная дезинфекция воды в коммунальном хозяйстве, промышленные системы оборотного водоснабжения, обеззараживание воды в пищевой и фармацевтической промышленности, где требуется снижение хлорирования).
Full descriptionCollapse description
Основная функция - уничтожение патогенных микроорганизмов (бактерий, вирусов, грибов, спор) с помощью ультрафиолетового излучения спектра - C (UV - C). Установка состоит из следующих основных элементов: корпус (материал изготовления нержавеющая стальL, внутренняя поверхность полированная), UV-C-лампа, кварцевый защитный чехол (трубка), держатель лампы, уплотняющие кольца, муфта, электронный блок управления, сетевой кабель с вилкой. Принцип работы: установка присоединяется к трубопроводу. Вода протекает через корпус, внутри которого находится амальгамная UV-C лампа в кварцевом защитном чехле.
Излучение с длиной волны 253.7 нм разрушает ДНК/РНК микроорганизмов, делая их нежизнеспособными. Процесс является физическим, без добавления химических реагентов. Основные технические параметры: УФ-лампа мощностью 120 Вт, амальгамного типа; рекомендуемый расход воды 22 м³/ч (для достижения УФ-дозы 30 мДж/см²); максимальный расход воды 28 м³/ч; УФ-доза при рекомендованном расходе 47 мДж/см²; максимальное рабочее давление 3.0 бар (0.3 МПа); габаритные размеры: 960 мм (длина) x 88.9 мм (диаметр корпуса); вес (нетто) 4.5 кг; электропитание 230 В, 50/60 Гц, переменный ток.
Комплект поставки: установка в сборе с электронным пультом управления, комплект для монтажа (зажимы, крепеж), инструкция по монтажу и эксплуатации.
GRI 1 and 6
An electrical device designed to change the pulsed form of the voltage output signal of a frequency converter into a smooth sine waveform of a signal entering the windings of a connected electric motor in order to protect its isolation, increase its service life, and reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
The product is equipped with a housing, is an LC-chain, in which the main components are inductive (L) and capacitive (C) elements, selected according to the value of the nominal current of the frequency converter, i.e. depending on its type size.
The principle of operation of goods is based on the properties of inductances and containers to behave differently in AC circuits. The reactive resistance of inductance is directly proportional to the frequency of the flowing alternating current, and the higher the frequency of the current, the greater the resistance of inductance it exerts, delaying currents at higher frequencies and more easily passing currents with lower frequencies. The condenser, on the contrary, the higher the frequency of the current, the easier it is for a given current to flow through it, and the lower the frequency of the current, the greater the obstacle to the flow of current it is.
Due to the combination of inductive and capacitive elements with certain technical characteristics, the higher harmonics of current and voltage are suppressed, which provides a smooth sinusoidal signal at the output of the device. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: operating voltage range (T4) - 3 x 380~480 V-15% / +10%; network frequency -50/60 Hz ± 5%; current - 750A; total inductance - 0.081 mH; total capacity - 288 μF.
Overall dimensions (width x height x depth, in mm): 525 x 455 x 492. The goods are delivered packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: voltage - 3 x 660~690 V ± 10%; nominal current - 700 A; power - 630 kW;
Overall dimensions (W x V x G): 480 x 610 x 720 mm.
The goods are packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: voltage - 3 x 660~690 V ± 10%; nominal current - 170 A; power - 132 kW;
Overall dimensions (W x V x G): 360 x 340 x 500 mm.
The goods are packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: voltage - 3 x 660~690 V ± 10%; nominal current - 30 A; power - 22 kW;
Overall dimensions (W x V x G): 280 x 280 x 340 mm.
The goods are packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: voltage - 3 x 660~690 V ± 10%; nominal current - 110 A; power - 90 kW;
Overall dimensions (W x V x G): 360 x 330 x 510 mm.
The goods are packed in a plywood box.
GRI 1 and 6
A sinusoidal electric filter is an electrical device designed to change the pulsed form of the output voltage signal of a frequency converter into a smooth sinusoidal form of the voltage signal entering the windings of the connected electric motor in order to protect its isolation, increase its service life, reduce the acoustic noise of the electric motor.
Full descriptionCollapse description
Structurally, it is a housing in which its main components are installed - inductive (L) and capacitive (C) elements. The principle of the filter is based on the properties of inductances and containers to behave differently in AC circuits. The elements are selected in such a way as to suppress unwanted higher harmonics of current and voltage, which create additional losses. The filter is installed between the frequency converter and the electric motor.
Technical characteristics: voltage - 3 x 660~690 V ± 10%; nominal current - 60 A; power - 45 kW;
Overall dimensions (W x V x G): 280 x 280 x 370 mm.
The goods are packed in a plywood box.
GRI 1 and 6
What import requires
Veterinary and sanitary control
Goods fall under supervision by their type and characteristics
Sanitary and epidemiological supervision (control)
rule for the whole chapter 85Материалы, оборудование, вещества, устройства, применяемые в сфере хозяйственно-питьевого водоснабжения и при очистке сточных вод, в плавательных бассейнах; Продукция машиностроения и приборостроения производственного, медицинского и бытового назначения, кроме запасных частей к транспортным средствам и бытовой технике (за исключением контактирующих с питьевой водой и пищевыми продуктами); Материалы, изделия и оборудование, контактирующие с пищевыми продуктами; Оборудование, материалы для воздухоподготовки, воздухоочистки и фильтрации; Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные мерыРешение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154
Conformity assessment
May applyWhether the goods fall under a regulation depends on their name and characteristics. Check them against the list
- Постановление № 2425Единый перечень продукции: сертификация и декларирование в РФ
- Реакторы, включая реакторы токоограничивающие бетонные — declaration of conformity (part of the heading) · ГОСТ 14794-79
- Электрооборудование рудничное нормальное — certificate of conformity (part of the heading) · ГОСТ 30852.20-2002
- ТР ТС 002/2011Safety of high-speed rail transport
- Дешифраторы и блоки дешифраторов числовой кодовой автоблокировки — certificate of conformity
- Устройства защиты станций стыкования электрифицированных железных дорог — certificate of conformity
- ТР ТС 003/2011Safety of railway transport infrastructure
- Дешифраторы и блоки дешифраторов числовой кодовой автоблокировки — certificate of conformity
- Устройства защиты тяговых подстанций, станций стыкования электрифицированных железных дорог — certificate of conformity
- ТР ТС 004/2011Safety of low-voltage equipment
- электроприборы для уничтожения насекомых и грызунов — certificate of conformity
- ТР ТС 020/2011Electromagnetic compatibility of technical means
- электроприборы для уничтожения насекомых и грызунов — certificate of conformity
- ТР ЕАЭС 043/2017About requirements to means of ensuring fire safety and fire extinguishing
- Оповещатели пожарные — certificate of conformity
Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.
How it is done in practice
Valid documents in the EAEU unified register for subheading 8543 70: certificates 1,181, declarations 8,607.
- By technical regulation
- ТР ТС 020/20118,340ТР ТС 004/20115,430ТР ЕАЭС 037/20161,518ТР ТС 010/2011457ТР ТС 012/201192
- Schemes
- 1д7,0372д1,0543с6751с4293д236The letter after the scheme number shows the form: certification or declaration of conformity.
- Most active certification bodies
- ООО «Тех-Эксперт»РУП «Белорусский государственный институт метрологии»ООО «Гарант Плюс»
- Manufacturers outside the EAEU
- China3,030Germany286United States268Italy116United Kingdom97South Korea89
Manufacturers of these goods →Check a supplier’s document by its number →
Dual use
Expert review neededGoods fall under control by their technical characteristics, regardless of the code. Supplying without a licence when one is required is a criminal offence
Раздел 1 · Категория 1. Специальные материалы и связанные с ними оборудование и снаряжение
- Системы, оборудование и компоненты → Оборудование и устройства, специально разработанные для инициации зарядов и устройств, содержащих энергетические материалы, воздействием электричества:1.1.7.1 Запускающие устройства (запальные системы), разработанные для приведения в действие детонаторов взрывчатого вещества, определенных в пункте 1.1.7.2;
Раздел 1 · Категория 3. Электроника
- Системы, оборудование и компоненты → Электронные изделия:3.1.1.4 Электронные приборы и схемы, содержащие компоненты, изготовленные из сверхпроводящих материалов, специально разработанные для работы при температурах ниже критической температуры хотя бы одной из сверхпроводящих составляющих, и имеющие любое из следующего:
Раздел 5 · ввоз по соображениям национальной безопасности · Категория 4. Взрывчатые материалы промышленного назначения
- Средства применения взрывчатых веществ4.2.3 Устройства инициирования подрыва (запальные системы), разработанные для приведения в действие электродетонаторов, определенных в пункте 4.2.2;
Checked: one control list of six: dual-use goods (Russian Government Decree No. 1299 of 19.07.2022). The other five lists (nuclear, nuclear dual-use, missile, chemical, biological) are not checked here.
EAEU non-tariff regulation
Unified list of non-tariff measures (EEC Board Decision No. 30 of 21.04.2015). List entries selected by code
- 2.16licensing regimeon import and exportpartial match
Радиоэлектронные средства и (или) высокочастотные устройства гражданского назначения, в том числе встроенные либо входящие в состав других товаров
1 list entryвключающие в себя высокочастотные генераторы
- 2.19licensing regimeon import and exportpartial match
Шифровальные (криптографические) средства
1 list entryПрочие машины электрические и аппаратура, имеющие индивидуальные функции, содержащие
Tariff preferences
The code is on the EAEU list of preferential goods: for goods originating in a beneficiary country the duty is lower
46 countries
Burkina Faso, Guinea, Eritrea, Congo - Kinshasa, Timor-Leste, Afghanistan, Mauritania, Yemen, Cambodia, Lesotho, Laos, Bangladesh, Nepal, Tanzania, Palestinian Territories, Angola, Benin, Burundi, Haiti, Gambia, Guinea-Bissau, Djibouti, Zambia, Kiribati, Liberia, Madagascar, Malawi, Mali, Mozambique, Niger, Rwanda, Senegal, Myanmar (Burma), Sudan, Sierra Leone, Uganda, Chad, South Sudan, Syria, Solomon Islands, Comoros, Togo, Tuvalu, Ethiopia, Somalia, Central African Republic
The preference requires a document of origin and compliance with the direct consignment rule; customs checks the right to it at declaration.
Payments on import
Duty for this code: 0%. On top of the duty, on import into Russia you pay VAT of 22% (unless the goods are VAT-exempt) of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.
Import VAT in EAEU countries
- Russia22%Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025)
- Kazakhstan16%Tax Code of Kazakhstan, Art. 503(1), from 01.01.2026
- Belarus20%Tax Code of Belarus, Art. 122
- Armenia20%Tax Code of the Republic of Armenia
- Kyrgyzstan12%Tax Code of the Kyrgyz Republic
Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all
May be VAT-exempt
The exemption under list No. 1042 applies if the goods match the description and are registered as a medical device:
- 8543 — Приборы и аппараты для диагностики (кроме измерительных). 94 4200 (диоптриметры); приборы эндоскопические и увеличительные; аппараты рентгеновские медицинские диагностические; приборы радиодиагностические; приборы офтальмологические; приборы для аускультации (выслушивания); очки корригирующие (для коррекции зрения), приборы для функциональной диагностики прочие)
- 8543 70 800 0 — Оборудование санитарно-гигиеническое, средства перемещения и перевозки 94 5100 (оборудование дезинфекционное; оборудование стерилизационное; оборудование моечное, оборудование для санитарной обработки; оборудование для очистки и обогащения воздуха; средства перемещения и перевозки медицинские (носилки, тележки и другие)
- 8543 70 800 0 — Специальные средства для контроля и управления бытовой техникой, которые могут быть использованы только для профилактики инвалидности или реабилитации инвалидов (в том числе переключатели, педали, рукоятки с дистанционным управлением)
OKPD2 code
The match is set for the whole subheading, by the first six digits of the code
- 27.90.40 — Машины электрические и аппаратура специали Оборудование электрическое прочее, не включенное в другие группировки (включая магниты электрические; муфты и тормоза электромагнитные; захваты подъемные электромагнитные; ускорители частиц электрические; генераторы сигналов электрические)
Correspondence keys of the Russian Ministry of Economic Development, edition of 20.07.2023. The ministry’s caveat: Ключи отражают возможные соответствия между кодами на уровне первых шести знаков ТН ВЭД ЕАЭС (основанной на ГС) и кодами ОКПД 2 (основанного на КПЕС) по состоянию на 1 января 2022 года. Предлагаемые соответствия не являются исчерпывающими и предназначены для использования в качестве вспомогательного материала для облегчения работы по установлению возможных вариантов корреляции кодов классификаторов в отношении соответствующих категорий товаров.
Настоящие переходные ключи (сопоставительные таблицы) разработаны на основе данных агентства Евростат Комиссии Европейского союза по корреляции кодов Гармонизированной системы описания и кодирования товаров (ГС) 2022 года и Статистической классификации продукции по видам экономической деятельности в Европейском союзе (КПЕС) 2008 года. Ключи отражают возможные соответствия между кодами на уровне первых шести знаков ТН ВЭД ЕАЭС (основанной на ГС) и кодами ОКПД 2 (основанного на КПЕС) по состоянию на 1 января 2022 года. Предлагаемые соответствия не являются исчерпывающими и предназначены для использования в качестве вспомогательного материала для облегчения работы по установлению возможных вариантов корреляции кодов классификаторов в отношении соответствующих категорий товаров. Услуги не являются объектом классификации в ТН ВЭД ЕАЭС и не включены в переходные ключи. По мере внесения изменений в ОКПД 2 и ТН ВЭД ЕАЭС переходные ключи при необходимости подлежат актуализации.
The right code is in the HS code search.