Skip to content
IMEXP.RU
EAEU HS code

8705 90 800 5 — Special purpose motor vehicles (for example, breakdown lorries, crane lorries, fire-fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile workshops, mobile radiological units), other than those used for the transport of persons or goods: other: other: other: new

Special purpose motor vehicles (for example, breakdown lorries, crane lorries, fire-fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile workshops, mobile radiological units), other than those used for the transport of persons or goods: other: other: other: new

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

Duty rate
5%

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit
шт
Item
Requirements and measures
8

None: russian bans and restrictions, dual use, EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT
22%

The general import rate in Russia: Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025). This code is not named on the 10% VAT list (Decree No. 908) or the exemption list (No. 1042). The list of medical goods No. 688 is not checked here.

Where it sits in the nomenclature

Section XVII. Vehicles, aircraft, vessels and associated transport equipment

  1. 87Vehicles other than railway or tramway rolling stock, and parts and accessories thereof
  2. 8705Special purpose motor vehicles (other than those principally designed for the transport of persons or goods), e.g. breakdown lorries, crane lorries, fire fighting vehicles, concrete-mixer lorries, road sweeper lorries, spraying lorries, mobile workshops and mobile radiological units
  3. 8705 90Special purpose motor vehicles (other than those principally designed for the transport of persons or goods and excl. concrete-mixer lorries, fire fighting vehicles, mobile drilling derricks and crane lorries)
  4. 8705 90 80Other: other
  5. 8705 90 800 5you are here

Compare the description of your goods with the neighbouring codes on the subheading line above.

Explanatory notes to heading 8705 4 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

8705 Special purpose motor vehicles (e.g. emergency trucks, cranes, fire trucks, concrete mixers, road cleaners, washing machines, car repair shops, X-ray machines) other than those used for the carriage of passengers or goods (+): 8705 10 – cranes 8705 20 – drilling vehicles 8705 30 – fire trucks 8705 40 – concrete mixers 8705 90 – other Motor vehicles specially designed or adapted for the transport of various devices which are not intended for the transport of goods or for the purpose of transport of certain goods.

This heading includes: (1) Emergency trucks, which are car chassis with or without a floor and equipped with lifting devices such as non-reversible cranes, goats, blocks or winches, and designed to lift and tow vehicles in emergency condition. (2) Pumping vehicles equipped with a pump, usually powered by a motor vehicle (e.g. fire trucks). (3) Trucks equipped with ladders or lifting platforms for the repair of contact hanging networks, street lighting, etc.; trucks with adjustable boom and platform ("crane") for filming or television equipment. (4) Trucks used for cleaning streets, sewage ditches, airfield runways, etc. (e.g. sweeping, watering and combined sweeping and washing cars, sewage cars). (5) Snow purifiers are plow and rotary with built-in equipment; that is, cars designed exclusively for snow removal and usually equipped with turbines, rotating blades, etc., with drive either from the car engine or from a separate engine. In all cases, interchangeable plow or rotary snow blowers of all types are not included in this heading (heading 8430), whether or not they are mounted on a motor vehicle. (6) Trucks-distributors of all kinds, equipped with heating equipment or not, as well as equipment for the distribution of tar or gravel, for agricultural purposes, etc. (7) Cranes, not intended for the carriage of goods, consisting of an automobile chassis on which the cab and the rotary crane are permanently mounted. However, trucks with self-loading devices are not classified in this heading (heading 8704). (8) Truck drilling (i.e. trucks equipped with a tower assembled with a crane, winches and other drilling devices, etc.). (9) Trucks equipped with stack-layers (i.e., a movable platform on a vertical base, which, as a rule, is driven by the engine of the car). However, this heading does not include self-loading motor vehicles equipped with winches, lifting devices, etc., but intended mainly for the carriage of goods (heading 8704). (10) Concrete mixers consisting of a cab and an automobile chassis on which a concrete mixer adapted both for the manufacture and transportation of concrete is permanently mounted. (11) Mobile electric generator units consisting of a truck on which an electric generator unit is mounted, with a drive either from the car engine or from a separate engine. (12) Cars with radiological installations (e.g. equipped with a medical office, a darkened room and a full set of radiological equipment).

(13) Mobile clinics (medical or dental) with an operating theatre, anaesthetising equipment and other surgical apparatus. (14) Searchlight lorries, having a searchlight mounted on the vehicle, the power usually being supplied by a generator driven by the engine of the motor vehicle. (15) Vans for outside radio broadcasting. (16) Telegraph, radio-telegraph or radio-telephone vans, receiving and transmitting; mobile radar installations. (17) Racecourse vans equipped with calculating machines for the automatic totalling of winnings on races. (18) Mobile laboratories (e.g., for checking the performance of agricultural machinery). (19) Test lorries with recording instruments for determining the tractive effort of the motor vehicles towing them. (20) Mobile bakeries, fully equipped (dough kneader, oven, etc.); field kitchens. (21) Workshop vehicles equipped with various machine-tools and hand tools, welding appliances, etc. (22) Mobile banks, mobile libraries and mobile showrooms for the display of goods. The heading also excludes: (a) self-propelled road rollers (heading 8429); (b) agricultural rollers (heading 8432); (c) small mobile appliances, pedestrian-controlled and equipped with an auxiliary motor (e.g., appliances for sweeping parks, squares, etc., and appliances for applying road markings) (heading 8479); (d) vehicles equipped for habitation (heading 8703). MOTOR VEHICLE CHASSIS OR LORRIES WITH WORKING EQUIPMENT It should be noted that, to fall in this heading, a vehicle fitted with lifting or handling equipment, levelling, excavating or boring equipment, etc., must in fact constitute an essentially complete motor vehicle chassis or lorry, i.e., it must comprise at least the following mechanical features: propelling engine, gear box and controls for gear-changing, and steering and braking facilities. On the other hand, self-propelled machines (e.g., cranes, excavators) in which one or more of the propelling or central control elements listed above are located in the cab of the working machine mounted on a wheeled or tracked chassis, whether or not the machine as a whole is capable of moving on the road under its own power, are classified, for example, in heading 8426, 8429 or 8430. Similarly, this heading excludes self-propelled wheeled machines in which the chassis and the working equipment are specially adapted to each other and form an integral mechanical unit (e.g., self-propelled motor graders). In this case the equipment is not simply mounted on a motor vehicle chassis, but is completely integrated with it; the chassis cannot be used for other purposes and may have the essential characteristics of a motor vehicle indicated above.

It should be noted, however, that self-propelled snow-ploughs or snow-clearing vehicles with built-in equipment are always classified in this heading. Subheading Explanatory Note. Subheading 8705 10 See the Explanatory Note to heading 8705, Item (7).

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 87 — Vehicles other than railway or tramway rolling stock, and parts and accessories thereof 15 items

Notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. This chapter does not cover railway or tramway rolling stock designed solely for running on rails.

2. For the purposes of this chapter, ‘tractors’ means vehicles constructed essentially for hauling or pushing another vehicle, appliance or load, whether or not they contain subsidiary provision for the transport, in connection with the main use of the tractor, of tools, seeds, fertilisers or other goods. Machines and working tools designed for fitting to tractors of heading 8701 as interchangeable equipment remain classified in their respective headings even if presented with the tractor, and whether or not mounted on it.

3. Motor chassis fitted with cabs fall in headings 8702 to 8704, and not in heading 8706.

4. Heading 8712 includes all children's bicycles. Other children's cycles fall in heading 9503.

Subheading note

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. Subheading 8708 22 covers:

(a) front windshields, rear windows and other framed windows; and

(b) front windshields, rear windows and other windows, whether or not framed, containing heating or other electrical or electronic devices;

used exclusively or mainly with motor vehicles of headings 8701 to 8705.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of headings 8701, 8702, 8703, 8704, 8705 and 8716, the term “in service” applies to vehicles which have been in service for 3 years or more, irrespective of the mileage of the motor vehicle.

In the absence of documentary confirmation of the moment of release, that is, the date of manufacture of the vehicle, the year of release is determined by the manufacturing code specified in the identification number of the vehicle, while the full year of release is calculated from July 1 of the year of manufacture.

2. For the purposes of headings 8702 and 8703, the term “vehicles specially designed for medical purposes” means motor vehicles bearing special markings, audible and light-signalling equipment equipped with stretchers for the transport of the patient, devices for fixing stretchers during transport and ensuring the transport of the patient on stretchers installed therein.

3. In the supplementary note of the Eurasian Economic Union 6 to this chapter and heading 8704, the term "total vehicle mass" means the road mass specified by the manufacturer as the maximum design vehicle mass equal to the sum of the vehicle's own mass, the maximum load mass, the driver's mass and the mass of the full fuel tank.

4. For the purposes of subheadings 8716 39 300 1, 8716 39 500 2, 8716 39 800 3 and 8716 39 800 6, the term “total mass” means the road mass specified by the manufacturer as the maximum design mass of the semi-trailer or trailer equal to the sum of the proper mass of the semi-trailer or trailer and the maximum load mass.

5. In this chapter, the term "ecological class" means the classification code characterizing motor vehicles according to the level of emissions of harmful (polluting) substances, which are the exhaust gases of internal combustion engines and evaporation of motor vehicles fuel containing harmful (polluting) substances (carbon monoxide, hydrocarbons, nitrogen oxides and particulates).

6. For the purpose of heading 8703, the term “road vehicles” means motor vehicles satisfying all the following conditions:

(a) the gross mass of the vehicle is less than 5000 kg;

(b) a single enclosed interior space consists of a zone for the driver and one or two passengers in a row with the driver (zone 1) and an area that can be used for the transport of both people and goods (zone 2);

(c) both areas are equipped with permanent anchorages and fittings for the installation of seats and safety devices for each person, the seats may be fixed, folding or removable;

(d) the number of seats that can be installed in two zones shall allow the carriage of no more than 9 persons, including the driver;

(e) the side walls of zone 2 are equipped with windows;

(f) Area 2 has at least one door equipped with a window, side wall or rear;

(g) the ground clearance (including adjustable) provided by the vehicle manufacturer is not less than 210 mm;

(h) there is an all-wheel drive switchable to 2 wheels or non-switchable.

7. For subheadings 8703 21 109 1, 8703 40 109 1, 8703 40 109 2, 8703 60 109 1, 8703 60 109 2:

(а) термин «моторные транспортные средства повышенной проходимости» применяется к моторным транспортным средствам, не предназначенным для движения по дорогам общего пользования;

(b) the term “off-road tyres” means tyres with a rated pressure of not more than 100 kPa when driving off-road, having a tread pattern consisting of tracks of the same or different configuration separated by recesses.

8. In this chapter, any reference to an “electric motor” also applies to several electric motors.

9. In this chapter, the term "maximum 30-minute power of an electric motor" means the maximum load power that an electric motor can continuously provide for a 30-minute time period specified in the vehicle type approval. If there are several electric motors in a motor vehicle that drive it, their maximum 30-minute power is added.

10. For the purposes of headings 8703 80 000 3 and 8703 80 000 5, the term "passenger cars of category M1 or M1G" means motor vehicles used for the carriage of passengers and having, in addition to the driver's seat, not more than 8 seats. The category of motor vehicle shall be indicated in the type approval of the vehicle.

Classification rulings for this code (11)

Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.

Моторное транспортное средство новое (дата выпуска - июнь 2026 г.), оснащенное телескопическим подъемником с платформой (корзиной), предназначено для подъема персонала в шахтах и подземных горных выработках с целью осуществления высотных работ (заряжания шпуров и скважин взрывчатыми веществами, оборки кровли, осмотра, ремонта и технического обслуживания шахтной крепи и подземных коммуникаций).

Full description

Не используется для перевозки пассажиров или грузов. Транспортное средство оснащено четырёхтактным четырехцилиндровым дизельным двигателем, коробкой передач (передачи: три вперёд, одна назад), кабиной (на 2 человек, включая водителя) с органами управления (рулевое колесо, многофункциональный дисплей, рычаг переключения передач, педаль газа и тормоза), полноприводным шарнирно-сочлененным колесным шасси с двумя ведущими мостами, гидродинамической трансмиссией с электронным управлением, гидравлической тормозной системой и системой рулевого управления.

Основными элементами телескопического подъёмника с гидравлическим приводом являются: платформа (корзина), телескопическая стрела, гидравлическая система, система управления (пульт управления расположен в корзине под основным защитным козырьком), ограждения и блокировки. Основные характеристики: двигатель дизельный (объем 4764 см³, мощность 120 кВ), максимальная скорость транспортного средства 25 км/ч, масса без нагрузки 13920 кг, грузоподъемность 300 кг; максимальная высота подъема рабочей платформы 6,4 м. Машина оснащена системой пожаротушения, автоматической системой смазки, камерой заднего вида, комплектом инструментов и расходных материалов в количестве необходимом для первого пуска машины.

Габаритные размеры ДхШхВ: 9900x2140x2400 мм.

GRI 1 and 6

Моторное транспортное средство новое 2026 г. выпуска на базе полноприводного автомобильного шасси с колёсной формулой 8х8, со стационарно установленной, специально сконструированной установкой для подъёма, освоения, текущего и капитального ремонта скважин.

Full description

Автомобильное шасси оборудовано кабиной водителя с органами управления движения (тормозной системой и системой рулевого управления), дизельным ходовым двигателем, используемым как для движения, так и для обеспечения работы установки, механической 16-ступенчатой коробкой переключения передач, раздаточной коробкой. Установка состоит из следующих основных компонентов: вышка двухсекционная, телескопическая мачтового типа с системой подъёма и системой выдвижения; лебёдка тросовая четырехскоростная, однобарабанная с гидравлическим приводом; редуктор лебедки; кронблок с крюкоблоком; механизм неподвижной ветви талевого канат; вспомогательная лебедка; гидравлическая система (гидропривод лебедки, насос аксиально-поршневой нерегулируемый, бак масляный); пневматическая система (от ресиверов шасси); аутригеры (выносные опоры 4 шт.); гидрораскрепитель резьбовых соединений; электрооборудование.

Установка не оснащена оборудованием для проведения буровых работ (вращательная система, циркуляционная система, противовыбросовая система).

Основные технические характеристики: максимальная мощность двигателя 265 кВт. (360 л/с); рабочий объем привода лебёдки 160 см3, мощность 132 кВт, скорость подъема 1,0 м/с; максимальный крутящий момент редуктора лебёдки 28000 Нм., максимальное число оборотов 300 об/мин; тяговое усилие механизма неподвижной ветви талевого каната 130,4 кН., грузоподъёмность вспомогательной лебёдки 3 (тс), скорость подъёма 0-30 м/мин., рабочее давление пневматической системы 0,8 МПа; ход штока гидрораскрепителя резьбовых соединений 1000 мм, номинальное давление 12 МПа, тяговое усилие 8,4 (тс); напряжение электрооборудования 24 и 380 В; высота мачты от земли до оси кронблока 22 м; габаритные размеры ДхШхВ:11000х3000х229900 мм, масса 25120 кг.

GRI 1 and 6

Motor vehicle, new (year of release - 2025) on the basis of a three-axle frame chassis (with a wheel formula 6x4), equipped with a diesel engine, a driver's cab with controls (wheel, gearbox, brake pedal, accelerator pedal, fuel level indicator, indicator of the level of cooling fluid), headlights, position lights, moving scrapers, auger for manure supply, lifting lever, storage capacity (body).

Full description

The machine is designed to collect, transport and remove the remains of livestock.

Principle of operation: with the help of folding mobile scrapers, manure is fed to a manure collection device - a screw, which is driven by a hydraulic cylinder. The screw applies manure to the blades, which are located inside the lifting lever. They provide manure through an open hatch to move the contents. The loading level is controlled by the camera, the image from which is displayed on the operator’s display. The loading masses shall be evenly distributed over the body by means of an internal auger. After filling the container, the car follows to the place to unload the manure - the body is raised and the rear panel is automatically opened.

Technical characteristics: body capacity - 17 cubic meters, body size - 5x2.3x1.5 m, maximum speed - 30 km / h, weight without load - 11650 kg, permitted maximum weight - 17000 kg.

Overall dimensions of DhShV: 7580x2500x3030 mm.

GRI 1 and 6

Моторное транспортное средство новое 2026 г.в., оснащенное телескопическим подъемником с платформой, предназначено для подъема персонала и оборудования при проведении ремонтных работ в шахтах подземных выработках на разной высоте (например, для заряжание шпуров и скважин взрывчатыми веществами, осмотр шахтной крепи, технического обслуживания и т.д.).

Full description

Не используется для перевозки пассажиров или грузов. Машина оснащена турбированным четырехцилиндровым дизельным двигателем, кабиной (на 2 чел.) с органами управления (рулевое колесо, многофункциональный дисплей, рычаг переключения передач, педаль газа и тормоза), полноприводным шарнирно-сочлененным колесным шасси с двумя ведущими мостами, гидродинамической трансмиссией с электронным управлением, гидравлической тормозной системой и системой рулевого управления. Основными элементами телескопического подъёмника с гидравлическим приводом являются: рычажный механизм, платформа, гидравлическая система, система управления, ограждения и блокировки.

Основные характеристики: двигатель дизельный (объем 4764 см³, мощность 120 кВ), максимальная скорость транспортного средства 25 км/ч, масса без нагрузки 13600 кг., допустимая максимальная масса 14100 кг., грузоподъемность 500 кг; максимальная высота подъема рабочей платформы 9 м. Машина оснащена системой пожаротушения, автоматической системой смазки, камерой заднего вида, комплектом инструментов и расходных материалов в количестве необходимом для первого пуска машины.

Габаритные размеры ДхШхВ:10500х2300х2470 мм.

GRI 1 and 6

Self-propelled underground installation with mounting cradle, which is a motor vehicle (hereinafter - the vehicle), specially designed to accommodate a boom with a basket.

Full description

The main components: the frame of the articulated design, consisting of two half frames: the front, where the closed cabin and power plant are located, and the rear, where the arrow with a basket for lifting personnel is located. The rotation of the vehicle is carried out by moving the half frames in the horizontal plane. The vehicle is equipped with a 4-cylinder engine, 4-wheel drive, consisting of 4 hydraulic motors and a pump, brakes. Main characteristics: lift load 400 kg, maximum lifting height of the platform 8.5 m, speed of movement of the vehicle up to 15 km / h, total weight of the vehicle 16 500 kg, production date June 2025

GRI 1 and 6

Самоходный пассажирский трап на базе нового (2026 г.в.) моторного транспортного средства, предназначен для посадки и высадки пассажиров из гражданских пассажирских воздушных судов на территории аэропорта.

Full description

Трап установлен на специальное автомобильное шасси с колёсной формулой 4х2, оборудованное закрытой кабиной водителя в которой размещены органы обеспечивающие управление и движение (рулевое управление, тормозная система, педали газ/тормоз, управление переключением передач, контрольные приборы). Трап оборудован приборами световой и звуковой сигнализации, на крыше кабины установлен проблесковый маяк оранжевого цвета. Лестничная секция представляет собой стальную раму с алюминиевыми внешними панелями. Диапазон обслуживаемых высот от 2200 мм до 5800 мм.

Панель управления всеми функциями лестничной секции размещена на верхней платформе. Трап оснащён: дизельным двигателем объёмом 2800 см³, мощностью 54 кВт при 2500 об/мин, автоматической трансмиссией с 2 передачами вперёд и 1 передачей назад.

Габаритные размеры (ДхШхВ) 8350х2400х3720 мм, колёсная база 3250 мм, вес 7600 кг.

GRI 1 and 6

Моторное транспортное средство новое (2026 г.в.) на базе автомобиля повышенной пpоходимости, колёсной формулой типа 4х4, оснащённое двухдверной двухместной кабиной с органами управления движением (рулевой механизм, тормозная система, управление переключением скоростей, приборы со световыми и звуковыми сигнализаторами) и грузовой платформой, на которой установлены: сварочный агрегат с генератором мощностью 22/25 кВт, с приводом от дизельного двигателя и вспомогательные системы (топливный бак, АКБ, система фильтрации и охлаждения); гидравлическая система; выносные опоры.

Full description

Так же на платформе смонтирована краноманипуляторная установка (КМУ) стрелового типа с одной гидравлической и одной механической стрелой, грузоподъёмностью до 990 кг, предназначенная для строительно-монтажных работ. Работа КМУ осуществляется от двигателя, который подключается к сварочному агрегату через привод насоса посредством рабочей жидкости гидросистемы. Транспортное средство не предназначено для перевозки людей или грузов.

Основные технические характеристики: двигатель, рабочий объем двигателя 2693 см³, коpобка пеpедач механическая, пятиступенчатая, масса снаpяженного автомобиля (базы) 2065 кг, технически допустимая максимальная масса машины 3,5 т, габаритные размеры: ДхШхВ:5562х1990х3005 мм.

GRI 1 and 6

The coltubing unit stationaryly placed on a new (from the release date of less than 3 years) motor vehicle based on an all-wheel drive five-axle automobile chassis is designed to carry out descent-lifting and technological operations using a non-clutch long-dimensional pipe (BDT) during capital, current repair and intensification of oil and gas wells without silencing them on a sealed estuary.

Full description

The chassis is equipped with a driver's cab with traffic controls, 5 leading axles on the wheel formula - 10x10, a diesel running engine used both for movement and to ensure the operation of the coltubing installation. Coltubing installation mounted on the car chassis consists of the following functional units: hydraulic system, the operator's cabin of the installation with a control panel, the speaker system, the BDT winding unit, the installation of the manifold of the external and internal, the depth indication system, the electric system, the guide trough, the installation of the drums of the winding of the high pressure sleeve, the injector (mechanism for descent and lifting the BDT into the well), the installation of the injector poles, the BDT lubrication system, the drive of the pumps, the mechanism for the operation of the sensor, the installation of the setup of the operating device in the operating position of the sensor.

The main technical parameters: engine power 309 (420) kW (hp), total weight not more than 75200 kg., maximum traction force of the injector 450 kN, BDT diameter not more than 50.8 mm., maximum length of BDT with a diameter of 44.45 mm. - 7000 m., with a diameter of 50.8 mm. - 5400 m., overall dimensions of length, width, height not more than 16200x2550x4500 mm., maximum speed of movement 50 km / h.

GRI 1 and 6

Моторное транспортное средство новое 2026 г.в.

Full description

(далее – машина), оснащенное ножничным подъемником, не используется для перевозки пассажиров или грузов. Машина предназначена для подъема и обеспечения стабильности и безопасности персонала и оборудования при проведении ремонтных работ в шахтах и подземных выработках на разной высоте (например, ремонт шахтных электросетей, замена световых и звуковых сигнализаций, обслуживание световых приборов и т.д.). Машина оснащена четырехтактным четырехцилиндровым двигателем, кабиной с органами управления, полноприводным шарнирно-сочлененным колесным шасси с двумя ведущими мостами, гидродинамической трансмиссией с электронным управлением, гидравлической тормозной системой и системой рулевого управления.

Основными элементами ножничного подъёмника с гидравлическим приводом являются: рычажный механизм, платформа, гидравлическая система, система управления, ограждения и блокировки. Основные характеристики: тип двигателя – дизельный, объем двигателя – 4764 см³; максимальная скорость – 25 км/ч; масса без нагрузки – 11700 кг; грузоподъемность – 1500 кг; допустимая максимальная масса – 13200 кг; максимальная высота подъема рабочей платформы – 3 м. Машина оснащена системой пожаротушения, автоматической системой смазки, камерой заднего вида, комплектом инструментов и расходных материалов в количестве необходимом для первого пуска машины.

GRI 1 and 6

Шахтный самоходный шиномонтажный манипулятор предназначен для монтажа/демонтажа при помощи стрелы-манипулятора шин шахтной техники в условиях узкого пространства шахт и туннелей, а также для доставки целых и неисправных демонтированных колес к месту проведения ремонта и обратнок ремонтному боксу.

Full description

Представляет собой моторное транспортное средство (далее - ТС), оснащенное двигателем внутреннего сгорания (далее - ДВС), установленным на шарнирно-сочлененной раме, имеющее кабину с органами управления, полноприводное колесное шасси с четырьмя колесами и двумя ведущими мостами, гидротрансформатором коробки передач, оснащенное тормозной системой и системой рулевого управления. На задней раме ТС расположена стрела-манипулятор для захвата и перемещения колес, гидравлические домкраты стабилизации машины во время работы и платформа для транспортировки колес.

Основные характеристики: тип ДВС: дизельный, четырехтактный, рядный, четырехцилиндровый, объем ДВС: 4.5 л., мощность ДВС: 97 КВт., грузоподъемность ТС до 1000 кг., полная масса ТС: 11500 кг., максимальная скорость ТС: 25 км/ч., число мест ТС в кабине, включая водителя: 2 места,объем бака: 170 л., габаритные размеры 7265х2020х2233 мм., момент выпуска ТС: март 2025 г.

GRI 1 and 6

The high-pressure pumping unit on the basis of a new (from the release date of less than 3 years) three-axle automobile chassis is designed for dewaxing, cleaning of frozen pressure lines and other technological operations requiring injection of heated process fluids, for blowing pressure lines, washing sand and paraffin stoppers, cementing works, insulation of water inflows, acid treatment and other repair works at wells of all types.

Full description

It is not designed to carry people or goods. The chassis is equipped with a cabin in which the motion controls are located (steering and brake systems, speed switching lever, pedal, dashboard), a diesel engine with a capacity of 315 kW (430 hp), a mechanical, ten-speed gearbox. On the chassis is mounted a superframe on which are placed: the operator's cabin with a pump control unit; high pressure pump (HVD); installation of a heater; installation of a feed pump; recharge capacity; low pressure manifold; electrical system; high pressure manifold; driveshafts; reducer; pneumosystem, hydraulic system; hydraulic pumps.

The NVD drive is carried out from the chassis engine through the transfer case, gearbox and driveshafts.

Technical characteristics of NVD: maximum power of 600 hp (447 kW), maximum revolutions of the input shaft 2100 rpm, dimensions (DhShV) 1276x1344x607 mm, dry weight 2086 kg. Total vehicle weight 28000 kg, overall dimensions (DhShV) 11000x2550x4000 mm.

GRI 1 and 6

What import requires

Veterinary and sanitary control

Goods fall under supervision by their type and characteristics

  • Sanitary and epidemiological supervision (control)

    rule for the whole chapter 87
    Продукция (товары) для детей: игры и игрушки, постельное белье, одежда, обувь, учебные пособия, мебель, коляски, сумки (ранцы, рюкзаки, портфели и т. п.), дневники и аналогичные изделия, тетради, прочая канцелярская продукция (товары) из бумаги и картона, принадлежности канцелярские или школьные искусственные полимерные и синтетические материалы для изготовления продукции (товаров) детского ассортимента; Продукция, изделия, являющиеся источником ионизирующего излучения, в том числе генерирующего, а также изделия и продукция (товары), содержащие радиоактивные вещества; Строительное сырье и материалы, в которых гигиеническими нормативами регламентируется содержание радиоактивных веществ, в том числе производственные отходы для повторной переработки и использования в народном хозяйстве, лом черных и цветных металлов (металлолом); Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры

    Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

  • ТР ТС 010/2011Safety of machinery and equipment
    • Оборудование нефтепромысловое, буровое геолого-разведочное — declaration of conformity or certificate of conformity (part of the heading)
    • Машины дорожные, оборудование для приготовления строительных смесей — declaration of conformity or certificate of conformity (part of the heading)
    • Машины и оборудование для коммунального хозяйства — declaration of conformity or certificate of conformity (part of the heading)
  • ТР ТС 018/2011Safety of wheeled vehicles
    • Транспортные средства, используемые для перевозки грузов - автомобили грузовые и их шасси (категория N) (в том числе:) — certificate of conformity (part of the heading)
  • ТР ЕАЭС 043/2017About requirements to means of ensuring fire safety and fire extinguishing
    • Автомобили связи и освещения — declaration of conformity
    • Автомобили газодымозащитной службы — declaration of conformity
  • ТР ЕАЭС 050/2021About safety of products intended for civil defense and protection from emergency situations of natural and man-made character
    • автомобили-фургоны для перевозки спасательных формирований, пострадавших, спасательных средств, диагностической аппаратуры, спасательного инструмента и оборудования, снего- и болотоходы, транспортеры и амфибии — certificate of conformity

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

How it is done in practice

Valid documents in the EAEU unified register for subheading 8705 90: certificates 599, declarations 35,777.

By technical regulation
ТР ТС 018/201135,587ТР ТС 010/2011737ТР ТС 020/2011133ТР ТС 004/201115ТР ТС 012/20113
Schemes
7д31,4021д4,0331с2923д1739с71The letter after the scheme number shows the form: certification or declaration of conformity.
Most active certification bodies
ООО Агентство по экспертизе и испытаниям продукцииБишкекский Центр испытаний сертификации и метрологии при Центре стандартизации и метрологии при Министерстве экономики и коммерции Кыргызской РеспубликиОС «ИНСАТ» НП «Институт сертификации автомототехники»
Manufacturers outside the EAEU
China168Türkiye11Germany10Italy5South Korea5Netherlands5

Manufacturers of these goods →Check a supplier’s document by its number →

Tariff reliefs

List of goods exempt from import duty (section 7.1 of Customs Union Commission Decision No. 130 of 27.11.2009). Not everyone qualifies: each item has its own conditions, and the item is quoted in full

  • Item 7.1.2
    Моторные транспортные средства товарных позиций 8701, 8702, 8704, 8705 ТН ВЭД ЕАЭС, произведенные хозяйствующими субъектами государств- членов с применением понятия "промышленная сборка", при выполнении условий, определяемых отдельным решением Комиссии;

Payments on import

Duty for this code: 5%. On top of the duty, on import into Russia you pay VAT of 22% of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

Import VAT in EAEU countries

  • Russia22%
  • Kazakhstan16%
  • Belarus20%
  • Armenia20%
  • Kyrgyzstan12%

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

The right code is in the HS code search.