EAEU HS code

8708 50 990 9 — Parts and accessories of the motor vehicles of headings 8701 – 8705: drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof: other: parts: other: other: other

Parts and accessories of the motor vehicles of headings 8701 – 8705: drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof: other: parts: other: other: other

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

Duty rate

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit

Not applicable

Requirements and measures

Veterinary and sanitary control1
Conformity assessment3

None: russian bans and restrictions, dual use, EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT

VAT-exempt or 22%

Exempt if it is a medical device on the exemption list. Otherwise 22%.

Where it sits in the nomenclature

Section XVII. Vehicles, aircraft, vessels and associated transport equipment

87Vehicles other than railway or tramway rolling stock, and parts and accessories thereof
8708Parts and accessories for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles of heading 8701 to 8705, n.e.s.
8708 50Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, and parts thereof, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s.
8708 50 99Parts for drive-axles with differential, whether or not provided with other transmission components, for tractors, motor vehicles for the transport of ten or more persons, motor cars and other motor vehicles principally designed for the transport of persons, motor vehicles for the transport of goods and special purpose motor vehicles, n.e.s. (excl. those for the industrial assembly of certain motor vehicles of subheading 8708.50.20, for non-driving axles and of closed-die forged steel)
8708 50 990 9you are here

Compare the description of your goods with the neighbouring codes on the subheading line above.

Explanatory notes to heading 8708 4 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

8708 Parts and accessories of the motor vehicles of headings 8701 – 8705: 8708 10 – bumpers and parts thereof – other parts and accessories of bodies (including cabs): 8708 21 – – safety seat belts 8708 29 – – other 8708 30 – brakes and servo-brakes; parts thereof 8708 40 – gear boxes and parts thereof 8708 50 – drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof 8708 70 – road wheels and parts and accessories thereof 8708 80 – suspension systems and parts thereof (including shock-absorbers) – other parts and accessories: 8708 91 – – radiators and parts thereof 8708 92 – – silencers and exhaust pipes; parts thereof 8708 93 – – clutches and parts thereof 8708 94 – – steering wheels, steering columns and steering boxes; parts thereof 8708 95 – – safety airbags with inflater system; parts thereof 8708 99 – – other

This heading covers parts and accessories of motor vehicles of headings 8701 to 8705, provided that such parts and accessories simultaneously meet the following two requirements: (i) they must be identifiable as being suitable for use exclusively or principally with the said vehicles; and (ii) they must not be excluded by the provisions of the notes to Section XVII (see the relevant general provisions). Parts and accessories of this heading contain: (A) Chassis frames of motor vehicles assembled (whether they are equipped with wheels or not, but without engines) and parts thereof (rangers, stretchers, crossbars; mounting elements of suspensions; support elements and brackets for body parts, engine, footrests, batteries or fuel tanks, etc.).

(B) Parts of bodies and associated fittings, e.g., floor panels, sides, front or rear panels, luggage compartments, etc.; doors and parts thereof; bonnets; framed windows, windows fitted with heating resistors and electrical connectors, window frames; running-boards; wings, mudguards; instrument panels; radiator grilles; number-plate brackets; bumpers and bumper guards; steering column brackets; exterior luggage racks; visors; non-electrical heaters and defrosters which utilise heat produced by the vehicle's engine; safety seat belts designed to be permanently fixed in the vehicle for the protection of persons; floor mats (other than of textile materials or of unhardened vulcanised rubber), etc. Assemblies (including unit-construction chassis-bodies) not yet having the character of incomplete bodies, e.g., not yet fitted with doors, wings, bonnets and boot lids, etc., fall in this heading and not in heading 8707. (C) Clutches (cone, plate, hydraulic, automatic, etc., but not electro-magnetic clutches of heading 8505), clutch casings, clutch plates and levers, and mounted linings. (D) Gear boxes of all types (mechanical, overdrive, pre-selector, electro-mechanical, automatic, etc.); torque converters; gear box casings; shafts (other than internal parts of engines or motors); gear pinions; direct-drive dog-clutches, selector rods, etc. (E) Drive-axles with differential; non-driving axles (front or rear); differential casings; sun and planet gear wheels; hubs, stub-axles, stub-axle brackets. (F) Other transmission parts and components (e.g., propeller shafts, half-shafts; gear wheels, gearing; plain shaft bearings; reduction gear assemblies; universal joints). But the heading excludes internal engine parts such as the connecting rods, push rods and valve tappets of heading 8409, and the crankshafts, camshafts and flywheels of heading 8483. (G) Steering gear parts (e.g., steering columns, tie rods and levers, track rods of the steering knuckles; casings; rack-and-pinion mechanisms; power steering units). (H) Brakes (drum, sector, disc, etc.) and parts thereof (discs, drums, brake cylinders, mounted brake linings, reservoirs for hydraulic brakes, etc.); servo-brake systems and parts thereof. (IJ) Suspension shock-absorbers (friction, hydraulic, etc.) and other suspension parts (other than springs), torsion bars. (K) Road wheels (pressed steel, wire-spoked, etc.), whether or not fitted with tyres; tracks and sets of track rollers for tracked vehicles; rims, wheel discs, hub caps and spokes. (L) Control equipment, e.g., steering wheels, steering columns and steering boxes, steered axles; gear change levers and hand-brake levers; accelerator controls, brake pedals and clutch pedals; linkages for brakes and clutches. (M) Radiators, silencers and exhaust pipes, fuel tanks, etc.

(N) Clutch control cables, brakes, accelerator and similar cables consisting of a flexible outer shell and a movable inner cable. They are presented in the form of segments of the desired length and have end elements of fastening. (O) Airbags of all types with an inflating system (for example, airbags on the driver's side, passenger airbags for installation in door panels to protect against side impacts or airbags for installation in the ceiling of the car for additional head protection) and parts thereof. The inflating system includes an igniter and a container with a propellant to directly direct the gas into the air cushion. Telemetry sensors and electronic regulators are not included in this heading as they are not considered to be parts of an inflating system. This heading does not cover hydraulic or pneumatic cylinders of heading 8412.

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 87 — Vehicles other than railway or tramway rolling stock, and parts and accessories thereof 15 items

Notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. This chapter does not cover railway or tramway rolling stock designed solely for running on rails.

2. For the purposes of this chapter, ‘tractors’ means vehicles constructed essentially for hauling or pushing another vehicle, appliance or load, whether or not they contain subsidiary provision for the transport, in connection with the main use of the tractor, of tools, seeds, fertilisers or other goods. Machines and working tools designed for fitting to tractors of heading 8701 as interchangeable equipment remain classified in their respective headings even if presented with the tractor, and whether or not mounted on it.

3. Motor chassis fitted with cabs fall in headings 8702 to 8704, and not in heading 8706.

4. Heading 8712 includes all children's bicycles. Other children's cycles fall in heading 9503.

Subheading note

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. Subheading 8708 22 covers:

(a) front windshields, rear windows and other framed windows; and

(b) front windshields, rear windows and other windows, whether or not framed, containing heating or other electrical or electronic devices;

used exclusively or mainly with motor vehicles of headings 8701 to 8705.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of headings 8701, 8702, 8703, 8704, 8705 and 8716, the term “in service” applies to vehicles which have been in service for 3 years or more, irrespective of the mileage of the motor vehicle.

In the absence of documentary confirmation of the moment of release, that is, the date of manufacture of the vehicle, the year of release is determined by the manufacturing code specified in the identification number of the vehicle, while the full year of release is calculated from July 1 of the year of manufacture.

2. For the purposes of headings 8702 and 8703, the term “vehicles specially designed for medical purposes” means motor vehicles bearing special markings, audible and light-signalling equipment equipped with stretchers for the transport of the patient, devices for fixing stretchers during transport and ensuring the transport of the patient on stretchers installed therein.

3. In the supplementary note of the Eurasian Economic Union 6 to this chapter and heading 8704, the term "total vehicle mass" means the road mass specified by the manufacturer as the maximum design vehicle mass equal to the sum of the vehicle's own mass, the maximum load mass, the driver's mass and the mass of the full fuel tank.

4. For the purposes of subheadings 8716 39 300 1, 8716 39 500 2, 8716 39 800 3 and 8716 39 800 6, the term “total mass” means the road mass specified by the manufacturer as the maximum design mass of the semi-trailer or trailer equal to the sum of the proper mass of the semi-trailer or trailer and the maximum load mass.

5. In this chapter, the term "ecological class" means the classification code characterizing motor vehicles according to the level of emissions of harmful (polluting) substances, which are the exhaust gases of internal combustion engines and evaporation of motor vehicles fuel containing harmful (polluting) substances (carbon monoxide, hydrocarbons, nitrogen oxides and particulates).

6. For the purpose of heading 8703, the term “road vehicles” means motor vehicles satisfying all the following conditions:

(a) the gross mass of the vehicle is less than 5000 kg;

(b) a single enclosed interior space consists of a zone for the driver and one or two passengers in a row with the driver (zone 1) and an area that can be used for the transport of both people and goods (zone 2);

(c) both areas are equipped with permanent anchorages and fittings for the installation of seats and safety devices for each person, the seats may be fixed, folding or removable;

(d) the number of seats that can be installed in two zones shall allow the carriage of no more than 9 persons, including the driver;

(e) the side walls of zone 2 are equipped with windows;

(f) Area 2 has at least one door equipped with a window, side wall or rear;

(g) the ground clearance (including adjustable) provided by the vehicle manufacturer is not less than 210 mm;

(h) there is an all-wheel drive switchable to 2 wheels or non-switchable.

7. For subheadings 8703 21 109 1, 8703 40 109 1, 8703 40 109 2, 8703 60 109 1, 8703 60 109 2:

(а) термин «моторные транспортные средства повышенной проходимости» применяется к моторным транспортным средствам, не предназначенным для движения по дорогам общего пользования;

(b) the term “off-road tyres” means tyres with a rated pressure of not more than 100 kPa when driving off-road, having a tread pattern consisting of tracks of the same or different configuration separated by recesses.

8. In this chapter, any reference to an “electric motor” also applies to several electric motors.

9. In this chapter, the term "maximum 30-minute power of an electric motor" means the maximum load power that an electric motor can continuously provide for a 30-minute time period specified in the vehicle type approval. If there are several electric motors in a motor vehicle that drive it, their maximum 30-minute power is added.

10. For the purposes of headings 8703 80 000 3 and 8703 80 000 5, the term "passenger cars of category M1 or M1G" means motor vehicles used for the carriage of passengers and having, in addition to the driver's seat, not more than 8 seats. The category of motor vehicle shall be indicated in the type approval of the vehicle.

Classification rulings for this code (24)

Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.

The product in the form of a hub of a curly-shaped car with a roller bearing pressed by the method of press landing so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a flange for mounting the product on the fist / turning fist of the leading axle of the car. The product is mounted on one side on the fist/turning fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product with the help of bolts, which are included in the delivery, brake and wheel discs of the car are installed (not included in the delivery kit). The product has a sealing system (layers of thin sheet metal, rubber sealing edges).

The main technical parameters: hub diameter - 148 mm, centering diameter - 68 mm, width - 69 mm, number of fastening holes: on the hub - 6, on the flange - 4. Designed for use in brand cars... The product is equipped with six M12x1.25 bolts for fastening the brake and wheel discs, four M12x1.25 bolts for fastening to the fist/turning fist of the leading axle of the car, splint, packed in cardboard packaging indicating the article number and information for the consumer.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a flange for mounting the product on the rotary fist of the leading axle of the car. The product is mounted on one side on the swivel fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product with the help of five bolts, which are included in the package, brake and wheel discs of the car are installed (not included in the package). The product contains lubrication, has a sealing system (sheet metal gaskets and rubber sealing edges), a magnetic encoder for the ABS sensor.

The main technical parameters: the diameter of the wheel hub is 136.0 mm, the diameter of the centering is 68.0 mm, the width is 40.7 mm, the number of fastening holes: 5 on the hub, 4 on the flange. The product is equipped with M12x1.25 bolts with a shoulder under the head (head type - internal 6-face) for fastening to the rotary fist of the leading axle of the car (4 pcs.), bolts with a rolling M12x1.25 (for fastening the brake and wheel discs) (5 pcs.), splint (1 pcs.). Designed for use in vehicles of the brand ...

Packed in cardboard packaging with the article number and information for the consumer.

GRI 1 and 6

The product in the form of a flange shaped with four holes under the bolts and pressed by the method of press landing ball bearing so that the flange is the outer ring of the bearing.

Full description

The product by one side through a flange is installed on the fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product is connected by pressing with the hub of the car (not included in the delivery), on which brake and wheel discs are mounted (not included in the delivery kit). In this case, the drive shaft of the car is mounted in the inner ring of the hub pressed with the product. The product has a sealing system (layers of thin sheet metal, rubber sealing edges) and a magnetic encoder for the ABS sensor.

The main technical parameters: external diameter - 92 mm, internal diameter - 44 mm, width - 67 mm. Designed for use in cars of the brand ..., ... The product is equipped with four M12x1.25 bolts, a flange gasket, a sealing ring, a seal shaft, a locking ring, packed in cardboard packaging with an indication of the article number and information for the consumer.

GRI 1 and 6

The product in the form of a flange shaped with four holes under the bolts and pressed by the method of press landing ball bearing so that the flange is the outer ring of the bearing.

Full description

The product by one side through a flange is installed on the fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product is connected by pressing with the hub of the car (not included in the delivery), on which brake and wheel discs are mounted (not included in the delivery kit). At the same time, the drive shaft of the car enters the inner ring of the hub pressed with the product, and is fixed by a nut, which is included in the delivery kit.

The product has a sealing system (layers of thin sheet metal, rubber sealing edges) and a magnetic encoder for the ABS sensor. The main technical parameters: external diameter - 92 mm, internal diameter - 49 mm, width - 41.2 mm. Designed for use in brand cars... It is equipped with four bolts M12x1.5 and a nut M27x1.5, packed in cardboard packaging indicating the article number and information for the consumer.

GRI 1 and 6

The product in the form of a flange shaped with four holes under the bolts and pressed by the method of press landing ball bearing so that the flange is the outer ring of the bearing.

Full description

GRI 1 and 6

The product in the form of a flange shaped with four holes under the bolts and pressed by the method of press landing ball bearing so that the flange is the outer ring of the bearing.

Full description

The product by one side through a flange is installed on the fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product is connected by pressing with the hub of the car (not included in the delivery), on which brake and wheel discs are mounted (not included in the delivery kit). At the same time, the drive shaft of the car is mounted in the inner ring of the hub pressed with the product, and is fixed by a nut that is included in the delivery kit.

The product has a sealing system (layers of thin sheet metal, rubber sealing edges). The main technical parameters: external diameter - 92 mm, internal diameter - 49 mm, width - 38 mm. Designed for use in brand cars... It is equipped with four bolts M10x1.5 and a nut M26x1.5, packed in cardboard packaging indicating the article number and information for the consumer.

GRI 1 and 6

The product in the form of a flange shaped with four holes under the bolts and pressed by the method of press landing ball bearing so that the flange is the outer ring of the bearing.

Full description

The product by one side by means of a flange is installed on the swivel fist of the leading axle of the car to a specially designated place using four bolts. On the other hand, the product is connected by pressing with the hub of the car (not included in the delivery), on which brake and wheel discs are mounted (not included in the delivery kit). At the same time, the drive shaft of the car enters the inner ring of the hub pressed with the product, is fixed by a nut (not included in the delivery kit) and a splint. The product has a sealing system (layers of thin sheet metal, rubber sealing edges).

The main technical parameters: outer diameter - 84 mm, inner diameter - 40 mm, width - 42.9 mm. Designed for use in brand cars... It is equipped with four M12x1.25 bolts and a splint, packed in cardboard packaging indicating the article number and information for the consumer.

GRI 1 and 6

The product in the form of a flange shaped with four holes under the bolts and pressed by the method of press landing roller bearing so that the flange is the outer ring of the bearing.

Full description

The main technical parameters: outer diameter - 95.95 mm, inner diameter - 54 mm, width - 50.9 mm. Designed for use in vehicles of the brand ... It is equipped with four M12x1.25 bolts, a sealing ring, a sealing ring for the shaft, a splint and a locking ring, packed in cardboard packaging with an indication of the article number and information for the consumer.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a figure-shaped flange for mounting the product on the fist of the leading axle of the car. The product is mounted on one side on the fist of the leading axle of the car to a specially designated place with the help of four bolts and a nut, which are included in the delivery kit. On the other hand, the product with the help of three bolts, which are not included in the delivery kit, brake and wheel discs of the car are installed (not included in the delivery kit). The product contains lubrication, has a sealing system (sheet metal gaskets and sealing edges from a rubber mixture).

The main technical parameters: the diameter of the wheel hub is 133.50 mm, the centering diameter is 58.00 mm, the width is 54.00 mm. The product is equipped with bolts M10 x 1.5 - 4 pcs. and M16 x 1.5 - 1 pcs. for fastening the product in the assembly, the number of fastening holes: on the hub - 3, on the flange - 4. Designed for use in brand cars...

Packed in cardboard packaging with the article number.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a flange for mounting the product on the fist of the leading bridge of the car. The product is mounted on one side on the fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product with the help of five bolts, which are included in the package, brake and wheel discs of the car are installed (not included in the package). The product contains lubricant and has a sealing system (sheet metal gaskets and rubber mixture sealing edges).

The main technical parameters: the diameter of the wheel hub is 125.0 mm, the diameter of the centering is 55.0 mm, the width is 42.0 mm, the number of fastening holes: 5 on the hub, 4 on the flange. The product is equipped with M12x1.25 bolts with a shoulder under the head (head type - external 6-facet) for fastening to the fist of the leading axle of the car (4 pcs.), bolts with a rolling M12x1.5 (for fastening the brake and wheel discs) (5 pcs.), a nut M22x1.5 12-face (for centering and connection) (1 pcs.). Designed for use in brand cars...

Packed in cardboard packaging with the article number and information for the consumer.

GRI 1 and 6

Product in the form of a hub of a round car with a roller bearing pressed by the method of press landing so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a flange for mounting the product on the rotary fist of the leading axle of the car. The product is mounted on one side on the swivel fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product with the help of bolts, which are included in the delivery, brake and wheel discs of the car are installed (not included in the delivery kit). The product has a sealing system (layers of thin sheet metal, rubber sealing edges), a magnetic encoder for the ABS sensor and an ABS sensor.

The main technical parameters: hub diameter - 140 mm, centering diameter - 68 mm, width - 46 mm, number of fastening holes: on the hub - 6, on the flange - 4. Designed for use in brand cars... The product is equipped with six M12x1.25 bolts for fastening the brake and wheel discs, four M12x1.25 bolts for fastening to the rotary fist of the leading axle of the car, a splint, packed in cardboard packaging with an indication of the articular number and information for the consumer.

GRI 1 and 6

The product in the form of a flange shaped with four holes under the bolts and pressed by the method of press landing ball bearing so that the flange is the outer ring of the bearing.

Full description

The product by one side through a flange is installed on the swivel fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery. On the other hand, the product is connected by pressing with the hub of the car (not included in the delivery), on which brake and wheel discs are mounted (not included in the delivery kit). At the same time, the hub of the car is fixed on the axis of the bridge using a nut, which is included in the delivery kit. The product has a sealing system (layers of thin sheet metal, rubber sealing edges) and a magnetic encoder for the ABS sensor.

The main technical parameters: outer diameter - 84 mm, inner diameter - 42 mm, width - 37 mm. Designed for use in cars of the brand ..., ... Completed with four bolts M10x1.25 and a nut M24x1.5, packed in cardboard packaging indicating the article number and information for the consumer.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

The product on one side with a flange outer ring is mounted on the rotary fist of the leading axle of the car by press landing, followed by fixing on the axis of the rotary fist with a threaded nut, which is included in the delivery kit. On the outer ring, a locking ring is fixed for reliable fastening in the turning fist. On the other hand, the product with the help of five bolts (not included in the delivery kit) is installed brake and wheel discs of the car (not included in the delivery kit). The product contains lubrication, has a sealing system (sheet metal gaskets and rubber mixture sealing edges) and is equipped with a magnetic encoder for the ABS sensor.

Main technical parameters: outer diameter - 126.8 mm, width 74.5 mm. The product is equipped with a nut M16x1.5 (for centering and connection to the axis) (1 pcs), a dust protection ring (1 pcs). Designed for use in cars of the brand ..., ..., ..., ... the Goods are packed in cardboard packaging with the indication of the article number and information for the consumer.

GRI 1 and 6

The product in the form of a hub of a curly-shaped car with a ball bearing pressed by the method of press landing so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a flange for mounting the product on the fist / turning fist of the leading axle of the car. The product is mounted on one side on the fist/turning fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product with the help of five bolts that are not included in the delivery set, brake and wheel discs of the car are installed (not included in the delivery kit). The product contains lubrication, has a sealing system (sheet metal gaskets and rubber mixture sealing edges) and is equipped with a magnetic encoder for the ABS sensor.

The main technical parameters: the diameter of the wheel hub is 138.8 mm, the diameter of the centering is 67 mm, the width is 44 mm. The product is equipped with bolts M12x1.25 (for fastening the product in the assembly) (4 pieces) and a bolt M16x1.15 (for centering and connecting to the axis) (1 pieces), the number of fastening holes: on the hub - 5, on the flange - 4. Designed for use in brand cars...

Packed in cardboard packaging with the article number and information for the consumer.

GRI 1 and 6

The hub of the wheel in the form of a circular flange with five holes under the bolts and pressed ball bearing so that the hub is the inner ring of the bearing.

Full description

The product is attached with an external ring to the swivel fist of the leading axle of the car by press landing. On the outer ring, a locking ring is fixed for reliable fastening in the turning fist. The hub of the wheel (internal ring) is designed to attach the brake and wheel discs and connect to the drive shaft. The product has a sealing system (layers of thin sheet metal, rubber sealing edges) and a magnetic encoder for the ABS sensor. The main technical parameters: outer diameter - 126.8 mm, width - 74.5 mm. Designed for use in cars of the brand ..., ...

The product is equipped with a nut M 16 x 1.5 - 1 pcs. and packed in cardboard packaging with an indication of the article number.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a figure-shaped flange for mounting the product on the rotary fist of the leading axle of the car. The product is mounted on one side on the swivel fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product with the help of five bolts, which are included in the package, brake and wheel discs of the car are installed (not included in the package). The product contains lubrication, has a sealing system (sheet metal gaskets and rubber mixture sealing edges) and is equipped with a magnetic encoder for the ABS sensor.

The main technical parameters: the diameter of the wheel hub is 136 mm, the diameter of the centering is 68 mm, the width is 40.70 mm. The product is equipped with bolts M12 x 1.25 - 5 pcs. for fastening the brake and wheel discs, M12 x 1.25 - 4 pcs. for fastening the mounting flange, splint - 1 pcs., the number of fastening holes: on the hub - 5, on the flange - 4. Designed for use in brand cars...

Packed in cardboard packaging with the article number.

GRI 1 and 6

The product in the form of a hub of a curly-shaped car with a ball bearing pressed by the method of press landing so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a figure-shaped flange for mounting the product on the fist of the leading axle of the car. The product is mounted on one side on the fist of the leading axle of the car to a specially designated place with the help of four bolts and a nut, which are included in the delivery kit. On the other hand, the product with the help of five bolts, which are included in the package, brake and wheel discs of the car are installed (not included in the package). The product contains lubrication, has a sealing system (sheet metal gaskets and rubber mixture sealing edges) and is equipped with a magnetic encoder for the ABS sensor.

The main technical parameters: the diameter of the wheel hub is 152.00 mm, the centering diameter is 62.00 mm, the width is 60.00 mm. The product is equipped with bolts M12 x 1.5 - 5 pcs. and M12 x 1.25 - 4 pcs., as well as a nut M22 x 1.5 - 1 pcs., the number of fastening holes: on the hub - 5, on the flange - 4. Designed for use in vehicles of the brand ...

Packed in cardboard packaging with the article number.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a figure-shaped flange for mounting the product on the fist of the leading axle of the car. The product is mounted on one side on the fist of the leading axle of the car to a specially designated place with the help of four bolts and a nut, which are included in the delivery kit. On the other hand, the product with the help of five bolts, which are included in the package, brake and wheel discs of the car are installed (not included in the package). The product contains lubrication, has a sealing system (sheet metal gaskets and rubber mixture sealing edges) and is equipped with a magnetic encoder for the ABS sensor.

The main technical parameters: the diameter of the wheel hub is 124.00 mm, the centering diameter is 58.00 mm, the width is 65.50 mm. The product is equipped with bolts M12 x 1.25 - 5 pcs., M12 x 1.25 - 4 pcs. and a nut M22 x 1.5 - 1 pcs., the number of fastening holes: on the hub - 5, on the flange - 4. Designed for use in brand cars...

Packed in cardboard packaging with the article number.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a figure-shaped flange for mounting the product on the rotary fist of the leading axle of the car. The product is mounted on one side on the swivel fist of the leading axle of the car to a specially designated place with the help of four bolts and a nut, which are included in the delivery kit. On the other hand, the product with the help of four bolts that are not included in the delivery set, brake and wheel discs of the car are installed (not included in the delivery kit).

The product contains lubrication, has a sealing system (sheet metal gaskets and rubber mixture sealing edges) and is equipped with a magnetic encoder for the ABS sensor. The main technical parameters: the diameter of the wheel hub is 137.50 mm, the centering diameter is 64.00 mm, the width is 44.00 mm. The product is equipped with bolts M10 x 1.5 - 4 pcs. and a nut M22 x 1.5 - 1 pcs. for fastening the product in the assembly, the number of fastening holes: on the hub - 4, on the flange - 4. Designed for use in brand cars...

Packed in cardboard packaging with the article number.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a figure-shaped flange for mounting the product on the fist of the leading axle of the car. The product is mounted on one side on the fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product with the help of five bolts that are not included in the delivery set, brake and wheel discs of the car are installed (not included in the delivery kit). The product contains lubrication, has a sealing system (sheet metal gaskets and rubber mixture sealing edges) and is equipped with a magnetic encoder for the ABS sensor.

The main technical parameters: the diameter of the wheel hub is 136.00 mm, the centering diameter is 68.00 mm, the width is 59.00 mm. The product is equipped with bolts M12 x 1.75 - 4 pcs. (for mounting flange) and M16 x 1.5 - 1 pcs. (fixes the product on the axle), the number of fastening holes: on the hub - 5, on the flange - 4. Designed for use in brand cars...

Packed in cardboard packaging with the article number.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a flange for mounting the product on the rotary fist of the leading axle of the car. The product is mounted on one side on the swivel fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product with the help of five bolts, which are included in the package, brake and wheel discs of the car are installed (not included in the package). The product contains lubrication, has a sealing system (sheet metal gaskets and rubber mixture sealing edges) and is equipped with a magnetic encoder for the ABS sensor.

The main technical parameters: the diameter of the wheel hub is 139.0 mm, the diameter of the centering is 62.0 mm, the width is 47.5 mm, the number of fastening holes: 5 on the hub, 4 on the flange. The product is equipped with M12x1.25 bolts with a shoulder under the head (head type - external 6-face) for fastening to the fist of the leading axle of the car (4 pcs.), bolts with a rolling M12x1.5 (for fastening the brake and wheel discs) (5 pcs.), a nut M22x1.5 with a flange, 12-face (for centering and connection)

(1 pcs.). Designed for use in vehicles of the brand ...

Packed in cardboard packaging with the article number and information for the consumer.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a flange for mounting the product on the rotary fist of the leading axle of the car. The product is mounted on one side on the swivel fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product with the help of bolts that are not included in the delivery set, brake and wheel discs of the car are installed (not included in the delivery kit). The product contains lubrication, has a sealing system (sheet metal gaskets and rubber mixture sealing edges) and is equipped with a magnetic encoder for the ABS sensor.

The main technical parameters: the diameter of the wheel hub is 137.5 mm, the diameter of the centering is 64.0 mm, the width is 44.0 mm, the number of fastening holes: 5 on the hub, 4 on the flange. The product is equipped with M10x1.5 bolts with a shoulder under the head (head type - external 6-face) for fastening to the fist of the leading axle of the car (4 pcs), a nut M22x1.5 6-facet (for centering and connection) (1 pcs). Designed for use in brand cars...

Packed in cardboard packaging with the article number and information for the consumer.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

At the same time, the outer ring of the bearing is a flange for mounting the product on the fist of the leading bridge of the car. The product is mounted on one side on the fist of the leading axle of the car to a specially designated place using four bolts that are included in the delivery kit. On the other hand, the product with the help of bolts that are not included in the delivery set, brake and wheel discs of the car are installed (not included in the delivery kit). The product contains lubricant and has a sealing system (sheet metal gaskets and rubber mixture sealing edges).

The main technical parameters: the diameter of the wheel hub is 133.5 mm, the diameter of the centering is 58.0 mm, the width is 54.0 mm, the number of fastening holes: 3 on the hub, 4 on the flange. The product is equipped with M10x1.5 bolts with a shoulder under the head (head type - external 6-face) for fastening to the fist of the leading axle of the car (4 pcs), a bolt M16x1.5 with a flange, an external 12-face (for centering and connection) (1 pc). Designed for use in brand cars...

Packed in cardboard packaging with the article number and information for the consumer.

GRI 1 and 6

Product in the form of a hub of a round car with a ball bearing pressed by the method of press fitting so that the hub is the inner ring of the bearing.

Full description

The main technical parameters: the diameter of the wheel hub is 136.0 mm, the diameter of the centering is 63.5 mm, the width is 63.0 mm, the number of fastening holes: 5 on the hub, 4 on the flange. The product is equipped with M12x1.25 bolts with a shoulder under the head (head type - internal 6-facet) for fastening to the fist of the leading axle of the car (4 pcs.), bolts with a rolling M12x1.5 (for fastening the brake and wheel discs) (5 pcs.), M22x1.5 nut with flange, 6 facets (for centering and connection) (1 pcs.).

Designed for use in brand cars...

Packed in cardboard packaging with the article number and information for the consumer.

GRI 1 and 6

What import requires

Veterinary and sanitary control

Goods fall under supervision by their type and characteristics

Sanitary and epidemiological supervision (control)
rule for the whole chapter 87
Продукция (товары) для детей: игры и игрушки, постельное белье, одежда, обувь, учебные пособия, мебель, коляски, сумки (ранцы, рюкзаки, портфели и т. п.), дневники и аналогичные изделия, тетради, прочая канцелярская продукция (товары) из бумаги и картона, принадлежности канцелярские или школьные искусственные полимерные и синтетические материалы для изготовления продукции (товаров) детского ассортимента; Продукция, изделия, являющиеся источником ионизирующего излучения, в том числе генерирующего, а также изделия и продукция (товары), содержащие радиоактивные вещества; Строительное сырье и материалы, в которых гигиеническими нормативами регламентируется содержание радиоактивных веществ, в том числе производственные отходы для повторной переработки и использования в народном хозяйстве, лом черных и цветных металлов (металлолом); Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры
Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

ТР ТС 018/2011Safety of wheeled vehicles
- Узлы и детали рулевого управления автомобилей: рулевые колеса; рулевые механизмы; рулевые усилители; гидронасосы; распределители и силовые цилиндры рулевых усилителей; колонки рулевого управления; угловые редукторы; рулевые валы; рулевые тяги; промежуточные опоры рулевого привода и рычаги; шкворни поворотных цапф — certificate of conformity
- Световозвращающие приспособления (световозвращатели) — certificate of conformity
- Мосты ведущие с дифференциалом в сборе и полуоси — certificate of conformity

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

How it is done in practice

Valid documents in the EAEU unified register for subheading 8708 50: certificates 612, declarations 145.

By technical regulation: ТР ТС 018/2011730ТР ТС 010/201120ТР ТС 020/20112
Schemes: 11с2733с1491д1051с1029с36The letter after the scheme number shows the form: certification or declaration of conformity.
Most active certification bodies: ООО «Центр Сертификации и Испытаний»ОС Сертификат ПлюсООО «АКАДЕМ-СЕРТ»
Manufacturers outside the EAEU: China313Türkiye47Germany39South Korea20Japan19Italy16

Manufacturers of these goods →Check a supplier’s document by its number →

Tariff preferences

The code is on the EAEU list of preferential goods: for goods originating in a beneficiary country the duty is lower

Least developed countrieszero rate0%

46 countries

Burkina Faso, Guinea, Eritrea, Congo - Kinshasa, Timor-Leste, Afghanistan, Mauritania, Yemen, Cambodia, Lesotho, Laos, Bangladesh, Nepal, Tanzania, Palestinian Territories, Angola, Benin, Burundi, Haiti, Gambia, Guinea-Bissau, Djibouti, Zambia, Kiribati, Liberia, Madagascar, Malawi, Mali, Mozambique, Niger, Rwanda, Senegal, Myanmar (Burma), Sudan, Sierra Leone, Uganda, Chad, South Sudan, Syria, Solomon Islands, Comoros, Togo, Tuvalu, Ethiopia, Somalia, Central African Republic

The preference requires a document of origin and compliance with the direct consignment rule; customs checks the right to it at declaration.

Payments on import

Duty for this code: 5%. On top of the duty, on import into Russia you pay VAT of 22% (unless the goods are VAT-exempt) of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

Import VAT in EAEU countries

Russia22%Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025)
Kazakhstan16%Tax Code of Kazakhstan, Art. 503(1), from 01.01.2026
Belarus20%Tax Code of Belarus, Art. 122
Armenia20%Tax Code of the Republic of Armenia
Kyrgyzstan12%Tax Code of the Kyrgyz Republic

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

May be VAT-exempt

The exemption under list No. 1042 applies if the goods match the description and are registered as a medical device:

8708 — Автомобили с ручным управлением и оборудование к ним (в том числе механизмы для погрузки кресла-коляски, поворотные сиденья, приспособления для закрепления кресла-коляски), устройства для ручного управления (в том числе механические, электрические, пневмогидравлические) и для переоборудования автомобилей)

Calculate the whole deal →Quick payment estimate →

The right code is in the HS code search.