Skip to content
IMEXP.RU
EAEU HS code

9403 70 000 8 — Other furniture and parts thereof: furniture of plastics: other: other

Other furniture and parts thereof: furniture of plastics: other: other

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

Duty rate
10% + EUR 0.075/kg

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit
Not applicable
Requirements and measures
13

None: russian bans and restrictions, dual use, EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT
VAT-exempt or 22%

Exempt if it is a medical device on the exemption list. Otherwise 22%.

Where it sits in the nomenclature

Section XX. Miscellaneous manufactured articles

  1. 94Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like; prefabricated buildings
  2. 9403Furniture and parts thereof, n.e.s. (excl. seats and medical, surgical, dental or veterinary furniture)
  3. 9403 70Furniture of plastics (excl. medical, dental, surgical or veterinary, and seats)
  4. 9403 70 00Furniture of plastics
  5. 9403 70 000 8you are here

Compare the description of your goods with the neighbouring codes on the subheading line above.

Explanatory notes to heading 9403 4 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

9403 Other furniture and parts thereof: 9403 10 – metal furniture used in institutions 9403 20 – metal furniture

9403 30 – wooden furniture type used in institutions 9403 40 – wooden furniture type kitchen 9403 50 – wooden furniture type bedroom 9403 60 – wooden furniture other 9403 70 – furniture made of plastic – furniture made of other materials, including reed, willow, bamboo or similar materials: 9403 82 – from bamboo 9403 83 – from rattan 9403 89 – – – other 9403 90 – parts of rattan

This heading covers furniture and parts thereof, not covered by the previous headings. It includes furniture for general use (e.g., cupboards, show-cases, tables, telephone stands, writing-desks, escritoires, book-cases and other shelved furniture (including single shelves presented with supports for fixing them to the wall), etc.), and also furniture for special uses. The heading includes furniture for: (1) Private dwellings, hotels, etc., such as: glazed cabinets, linen chests, bread bins, chests of drawers, tallboys; pedestals (floor stands), plant stands; dressing-tables; pedestal desks; wardrobes, linen presses; hall stands, umbrella stands; side-boards, dressers, buffets; food-safes; bedside tables; beds (including wardrobe beds, folding beds, camp-beds, cots, etc.); needlework tables; stools and foot-stools (whether or not rocking) designed to rest the feet, fire screens; draught-screens; pedestal ashtrays; music cabinets, music desks (for sheet music); play-pens; serving trolleys (whether or not fitted with a hot plate). (2) Offices, such as: clothes lockers, filing cabinets, filing trolleys, card-index furniture, etc. (3) Schools, such as: school desks, teachers' desks, easels (for blackboards, etc.). (4) Churches, such as: altars, confessionals, pulpits, pews, lecterns, etc. (5) Shops, stores, workshops, etc., such as: counters; dress racks; shelving units; compartment and drawer cupboards; tool cabinets, etc.; special furniture (with cases or drawers) for printing works. (6) Laboratories or technical offices, such as: microscope tables; laboratory benches (whether or not with glass cases, gas burners, water taps, etc.); fume-cupboards; unequipped drawing tables. The heading excludes: (a) trunks, suitcases and similar articles which are not furniture (heading 4202);

(b) ladders and step-ladders, trestles, work benches and similar articles which are not furniture; these are classified according to their constituent material (headings 4421, 7326, etc.); (c) builders' components (e.g., frames, doors and shelves) for cupboards, etc., built into the wall (heading 4418 if of wood); (d) waste-paper baskets (of plastics, heading 3926; baskets of plaiting materials, heading 4602; of base metal, headings 7326, 7419, etc.); (e) hammocks (generally heading 5608 or 6306); (f) mirrors designed to be placed on the floor or on the ground, and mirrors on a movable frame, or cheval-glasses, i.e., revolving mirrors, sliding mirrors for shoe shops, tailors' shops, etc. (heading 7009); (g) armoured or reinforced safes (heading 8303). On the other hand, fire-resisting and impact-resistant containers, the walls of which in particular do not offer reliable resistance to attempts to break them open by drilling or cutting, fall in this heading; (h) refrigerators, ice-boxes, etc. (i.e., cabinets, etc., having the appearance of furniture but equipped either with a refrigerating unit or with an evaporator of a refrigerating unit, or designed to receive such equipment) (heading 8418) (see Note 1 (e) to this Chapter). However, ice-cream boxes, ice-cream chests and similar articles, and insulated cabinets not equipped with an active refrigerating element and not designed to be so equipped, but insulated with glass fibre, cork, wool, etc., are included in this heading; (ij) furniture specially designed to house sewing machines or to serve as stands for them, whether or not it has an additional function as ordinary furniture when the machine is not in use; protective covers, drawers and extension leaves, and other constituent parts of such furniture (heading 8452); (k) furniture specially constructed as part of the apparatus of heading 8518 (heading 8518), of heading 8519 or 8521 (heading 8522) or of headings 8525 – 8528 (heading 8529); (l) drawing tables fitted with instruments such as pantographs (heading 9017); (m) dental spittoons (heading 9018); (n) mattress supports (heading 9404); (o) standard lamps and other lamps and lighting fittings (heading 9405); (p) billiard tables or other furniture specially constructed for games of heading 9504, conjuring tables of heading 9505.

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 94 — Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated nameplates and the like; prefabricated buildings 6 items

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) inflatable or water mattresses, cushions or sofa cushions of Chapter 39, 40 or 63;

(b) mirrors intended to be placed on the floor or ground (e.g., mirrors on a movable frame (psyche – rotating mirrors)) of heading 7009;

(c) articles of Chapter 71;

(d) parts of general use referred to in Note 2 to Section XV of base metals (Section XV) or similar articles of plastics (Chapter 39) or safes of heading 8303;

(e) furniture specially designed as parts of refrigeration or freezer equipment of heading 8418; furniture specially designed for sewing machines (heading 8452);

(f) lamps or light sources and parts thereof of Chapter 85;

(g) furniture specially constructed as parts of equipment of heading 8518 (heading 8518), of heading 8519 or 8521 (heading 8522), or of headings 8525 to 8528 (heading 8529);

(h) articles of heading 8714;

(и) стоматологические кресла со встроенным стоматологическим оборудованием товарной позиции 9018 или стоматологическими плевательницами (товарная позиция 9018);

(k) Articles of Chapter 91 (e.g. watches and watch cases);

(l) toy furniture or toy lamps and toy lighting equipment (heading 9503), billiard tables or other furniture specially designed for games (heading 9504), articles for tricks or decorations (other than light garlands), such as Chinese lanterns (heading 9505); or

(m) monopores, bipeds, tripods and similar articles (heading 9620).

2. Articles (other than parts thereof) of headings 9401 to 9403 are classified in these headings only if they are intended to be placed on the floor or on the ground.

However, the following articles fall under the headings above, even if they are intended to be hung, fixed to a wall or mounted on top of each other:

(a) wardrobes and bookcases, other furniture with shelves (including separate shelves presented with fasteners for fixing them on the wall) and sectional furniture;

(b) furniture for sitting and bed.

3. (A) In headings 9401 to 9403 references to parts of goods do not include references to sheets or plates (carved or not cut in shape but not joined to other parts) of glass (including mirrors), marble or other stones or of other materials specified in Chapter 68 or 69.

(B) Articles of heading 9404 presented separately shall not be classified in heading 9401, 9402 or 9403 as parts of the goods.

4. For the purpose of heading 9406, the term “prefabricated constructions” means buildings wholly manufactured in an establishment or supplied as a set of locally assembled elements, for example: dwellings or industrial premises, offices, schools, shops, sheds, garages or similar buildings.

“Prefabricated constructions” include “modular building blocks” of steel, usually having the size and shape of a standard shipping container, mainly or fully pre-equipped with internal equipment. Such modular building blocks are usually designed to be assembled with each other, resulting in stationary structures.

Additional notes of the Eurasian Economic Union

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. For the purposes of subheadings 9403 50 000 1, 9403 60 100 1, 9403 60 900 1, the term “gross mass” means the total mass of the goods with all kinds of packaging materials and packagings ensuring their safety during storage and transport. The total weight of the goods does not include the mass of packaging materials or containers that are clearly suitable for reuse.

2. For the purpose of classification of goods in subheadings 9403 50 000 1, 9403 60 100 1, 9403 60 900 1 in the states whose territories constitute the customs territory of the Eurasian Economic Union, when applying the term "franco-border of the country of importation", the country of import is understood as the customs territory of the Eurasian Economic Union.

EEC classification decisions (2)

Binding in all EAEU member states: if the goods match the description, the decision fixes the code

Classification rulings for this code (9)

Machine translation from Russian. The original is the Russian wording of the ruling, and customs goes by it; this translation is for understanding only and has no legal force.

The oval-shaped plastic cabinet is permanently installed on the floor of the passenger cabin of the helicopter and is designed to store soft drinks, documents (newspapers, magazines, booklets with information), as well as personal belongings of passengers.

Full description

The tube has the following equipment: four cup holders on the upper part of the cabinet (two on the right and left side); two upper drawers with lodgings for bottles (one at the front / back of the front side of the cabinet); two lower drawers with lodgings for bottles (one at the front / back of the front side of the cabinet); two side lower drawers (one on the left/right side of the tube); two side folding pencil (pocket) for documents (one on the left/right side of the cabinet); four sections with a swinging door (two on the right and left side on each side of the cabinet); electric vertical lifting mechanism, equipped with two rectangular metal brackets for two displays; two identical LCD color image displays with a diagonal size of 17.5 inches, installed on the lifting mechanism inside the tube (each display is attached to the bracket of the lifting mechanism by means of six screws).

The cabinet has overall dimensions: length - 96 cm, width - 50.5 cm, height - 56.5 cm. Details of the cabinet (walls, boxes, front panels of boxes, inner beds, box covers) are made by vacuum infusion (impregnation of fiberglass with epoxy resin under the action of vacuum in the form). The parts of the cabinet have a surface finish: the visible surfaces are painted with paint and varnish (the upper surface of the cabinet), covered with natural leather (front surfaces of the cabinet, side pockets); hidden surfaces (lower, inner surfaces of the cabinet parts, lodgings) are painted with soil/paint, covered with flox (pink), laminated.

Visible fittings: handles and locks of drawers, cup holders are made of aluminum with a decorative coating. Hidden fittings: mounting of cabinet parts (connection), rails of drawers, vertical lifting mechanism of displays are made of aluminum with protective coating. The cabinet is attached by means of six screws (not included in the delivery) from the bottom to the previously installed guide on the floor of the passenger cabin and six screws (not included in the delivery) to the holes on the floor of the passenger cabin of the helicopter.

The cabinet in assembled form is packed in a wooden box.

GRI 3(b) and 6

The plastic cabinet is permanently installed on the floor of the passenger cabin of the helicopter and is designed to store soft drinks, documents, as well as personal belongings of passengers.

Full description

The cabinet has overall dimensions: length - 79 cm, width - 40 cm, height - 55 cm. The cabinet has the following equipment: a liquid crystal display of a color image, with a diagonal size of 17 inches, installed inside the cabinet and equipped with a spring vertical lifting mechanism; a retractable upper decorative panel; two retractable top box with decorative handles on the front side of the cabinet (upper and lower), including: in the upper drawer with the possibility of storing glasses, CD/DVD discs and IR remote control of the DVD player, a built-in magnetic box on the upper side of the side of the phone, a side of the container with a remote storage device, two box from the side of the side of the plate box: Parts of the cabinet (side and back walls, boxes, front panels of boxes, internal lodgings, box covers) are made by vacuum infusion (impregnation of fiberglass with epoxy resin under the influence of vacuum in the form).

Percentage ratio of materials for the manufacture of cabinet parts: fiberglass - 30%, epoxy resin - 70%. Details of the cabinet have a surface finish: the visible surfaces are painted with paint and varnish (the upper surface of the cabinet, the front panels of the drawers), covered with natural leather (the front and side surfaces of the tube); hidden surfaces (the lower, rear, inner surfaces of the cabinet details) are painted with soil / paint, covered with flux (pal), laminated. Visible fittings: decorative handles, inserts, locks of retractable compartments are made of aluminum with a decorative coating.

Hidden fittings for fixing the cabinet parts, rails of drawers are made of aluminum with a protective coating. The cabinet is mounted with four screws (not included in the delivery) from the bottom to the previously installed guides on the floor of the passenger cabin and two screws (not included in the delivery) on the brackets from the back of the cabinet to the front partition. The cabinet in assembled form is packed in a wooden box.

GRI 3(b) and 6

The plastic cabinet is permanently installed on the floor of the passenger cabin of the helicopter and is designed to store soft drinks, documents (newspapers, magazines, booklets with information), as well as personal belongings and phones of passengers.

Full description

The cabinet has the following equipment: four cup holders on the upper part of the cupboard (two on the right and left side); two drawers with a folding cover (one on the right and left side); two drawers with a drawer for bottles with soft drinks (one on the right and left side); two side pockets for documents; two LED lamps located in the upper part of the side pockets (one on each of the pockets); an electric vertical lifting mechanism equipped with a housing for two displays and liquid boxes (two on the left-mounted lamps from the display boxes, two lamps from the left-mounting device, two in the same size of the lamps from the display boxes of the displays of 19; two lamps for the lamps from the lamps mounted on the displays.

The cabinet has overall dimensions: width - 108 cm, length - 34 cm, height - 56 cm. Parts of the cabinet (side and back walls, boxes, front panels of boxes, internal lodgings, box covers) are made by vacuum infusion (impregnation of fiberglass with epoxy resin under the influence of vacuum in the form). The parts of the cabinet have a surface finish: the visible surfaces are painted with paint and varnish (front panels of the boxes, upper, front and rear surfaces of the cabinet), covered with natural leather (front and back surfaces of the cabinet, side pockets); hidden surfaces (lower, inner surfaces of the cabinet parts, pawns) are painted with soil/paint, covered with flox (ship), laminated.

Visible fittings: handles and locks of drawers, handles of drawers with a folding lid, cup holders are made of aluminum with a decorative coating. Hidden fittings for fixing the cabinet parts, guiding the drawers, the vertical lifting mechanism of the displays are made of aluminum with a protective coating. The cabinet is attached by means of eight screws (not included in the delivery) from the bottom to the previously installed guide on the floor of the passenger cabin and eight screws (not included in the delivery) to the holes on the floor of the passenger cabin of the helicopter.

GRI 3(b) and 6

The plastic cabinet is permanently installed on the floor of the helicopter passenger cabin between two passenger seats.

Full description

The cabinet has overall dimensions: length - 60 cm, width - 19 cm, height - 60 cm. The cabinet has a frame, assembled from cellular panels, fastened together with brackets, corners and fasteners. Tumba is equipped with two (left and right) armchair mini-tables for passengers. Mini-tables are removed into two niches available in the cabinet. Inside the bench there is a rotary bracket that provides fastening, movement, fixing, folding / unfolding of armchair mini-tables, which are taken and removed by the passenger manually.

Niches cabinets with removed mini-tables are closed with armrest covers on hinges. On the back panel of the cabinet there is a box-pencil with a lodging for a bottle of water up to 1 liter. On the front panel of the bench there is a box-pencil with a lodgement for storing two tablets (not included in the delivery), connectors for charging them, two USB connectors for charging phones and a socket for 220 V. On the back of the cabinet there are two connectors for connecting headphones-headsets. On the top panel there is an emergency light switch.

Wires and cables, And they connect the connectors, The sockets and the switch are assembled in two electric lights in a span, Those who connect to the connectors, placed in the floor panel. The cabinet parts (frame panels, side, front and rear walls, box walls, front decorative panels, interior paddings, decorative linings, armrest covers) are made by vacuum infusion (impregnation of fiberglass with epoxy resin under the influence of vacuum in the form). Percentage ratio of materials for the manufacture of cabinet parts: fiberglass - 30%, epoxy resin - 70%.

The fittings and fastenings (connections) of the cabinet parts, the details of the mechanism for fastening mini-tables and the mini-tables themselves are made of aluminum alloy. Details of the cabinet have a surface finish: visible surfaces paint and varnish (front, rear, upward surface of the front panels of the cabinet, lining), natural skin tightening in the color of the seats (side panels of the cabinet, armrest covers); hidden surfaces (lower, inner surfaces of the cabinet parts, pads) color with soil / paint, visible internal surfaces of the boxes with floc treatment (boat), lamination.

The cabinet is mounted with four screws (not included in the package) to the floor panel. The cabinet in assembled form is packed in a wooden box.

GRI 1 and 6

Plastic cabinet is designed to store documents (newspapers, magazines, booklets with information), as well as personal belongings of passengers.

Full description

The cabinet has overall dimensions: width - 93 cm, height - 48.5 cm, depth - 10.5 cm and is equipped with a folding cover, under which there is a niche for storage. The cabinet parts (front and back walls, front surface of the cover) are made by vacuum infusion (impregnation of fiberglass with epoxy resin under the action of vacuum in the form). Percentage ratio of materials for the manufacture of cabinet parts: fiberglass - 30%, epoxy resin - 70%. The cabinet details have a surface finish: the front surface of the cover is painted with paint and varnish, the front surface of the cabinet is covered with natural leather; the hidden surfaces (lower, rear, inner surfaces of the cabinet details) are painted with soil / paint.

The fittings and fasteners are made of aluminum alloy. The cabinet has a folding cap handle, magnetic locks - 2 pcs., rotary hinges of the folding cover - 2 pcs. The cabinet is attached with four screws (not included in the delivery) to the rear wall of the passenger cabin of the helicopter in specially provided for installation of the response technological holes. The cabinet in assembled form is packed in a wooden box.

GRI 1 and 6

The plastic cabinet is permanently installed on the floor of the passenger cabin of the helicopter and is designed to store dishes, soft drinks, documents (newspapers, magazines, booklets with information), a multimedia control system (not included in the delivery kit), personal belongings and phones of passengers.

Full description

The cabinet has overall dimensions: width - 48 cm, height - 56 cm, depth - 70 cm and is equipped with three drawers, a compartment with a transparent cover for storing the multimedia control system, upper drawer, two side pockets on the left and right side of the cabinet (for documents), a cooler with an electric fan to cool the lower drawer. There are no refrigeration components. The inner parts of the lower and middle drawers are equipped with bottle lodgings. Inside the top drawer there is a lodging for dishes. Parts of the cabinet (side and back walls, boxes, front panels of boxes, internal lodgings, box covers) are made by vacuum infusion (impregnation of fiberglass with epoxy resin under the influence of vacuum in the form).

Percentage ratio of materials for the manufacture of cabinet parts: fiberglass - 30%, epoxy resin - 70%. The cabinet details have a surface finish: the front panels of the boxes are painted with paint and varnish, the side surfaces of the cabinet are covered with natural leather; the hidden surfaces (lower, rear, inner surfaces of the cabinet details, pawns) are painted with soil / paint, covered with floc (pil), laminated. The fittings and fasteners are made of aluminum alloy. The cabinet is fixed with two mounts (not included in the delivery) on the right and left sides to the guides installed on the floor of the passenger cabin.

The cabinet in assembled form is packed in a wooden box.

GRI 1 and 6

The body of the switchboard, hinged, is made of durable plastic and is designed to install modular equipment.

Full description

The goods are used in rooms with high levels of dust and moisture, in garages, production facilities, basements, car washes and warehouses, as well as in open areas. The goods are equipped with a protective front panel that prevents free access to live parts. The necessary electrical equipment is installed on the DIN-rail. Supply kit: shield body, DIN-rail, 10 N and 10 PE tires, installation kit.

Technical characteristics: the maximum number of modules is 12, the installation method is external, a high degree of dust and moisture protection, has markup for cable inputs.

Overall dimensions - 259x319x144 mm, weight - 1.4 kg.

The goods are packed in a cardboard box.

GRI 1 and 6

The casing of the distribution box, hinged, made of durable plastic, is designed to install modular equipment: automatic switches, RCD, timers, electricity meters, as well as for placing cables, auxiliary elements (not included in the delivery kit).

Full description

It is used for electrical installation in residential, administrative, commercial premises. The box is equipped with a protective operational panel that prevents free access to live parts. The necessary electrical equipment is installed on the DIN-rail. Supply package: plastic shield (box), DIN-rail, tire bar, tire - 2 pieces, installation kit.

Technical characteristics: the number of modules - 18, 1 bus (8 screws), 1 bus (10 screws), has stamped cable inputs. Net weight - 1.24 kg Overall dimensions: VhSHG (body) - 200x362x100 mm.

The goods are packed in a cardboard box.

GRI 1 and 6

The plastic cabinet is permanently installed on the floor of the passenger cabin of the helicopter and is designed to store soft drinks, documents, as well as personal belongings of passengers.

Full description

The cabinet has overall dimensions: width - 84 cm, height - 50 cm, length - 40 cm. The cabinet has the following equipment: two drawers with push buttons (the left drawer is equipped with a bottle pad). The right drawer has a cooling function and a folding cover inside; a cooling radiator with an electric fan for cooling the right drawer (refrigeration equipment components are absent); a panel with a folding cover on the upper surface of the bench with a USB port for charging mobile devices and an HDMI port for transferring digital audio and video files; a retractable lounge on the upper surface of the bench; a section with three USB ports for charging mobile devices and transferring data from a USB carrier to a liquid storage medium on the other side, with a digital display port on the top of the display with a digital tube and a video display on the display on the top of a 24-inch;

The cabinet in the upper rear has special technological grooves and cutouts for landing installation supports; a built-in DVD player with a control panel on the upper surface of the cabinet; a ventilation grille on the side surface of the cabinet. Parts of the cabinet (side and back walls, boxes, front panels of boxes, internal lodgings, box covers) are made by vacuum infusion (impregnation of fiberglass with epoxy resin under the influence of vacuum in the form). Details of the cabinet have a surface finish: the visible surfaces are painted with paint and varnish (the upper surface of the cabinet, the front panels of the drawers), covered with natural leather (front and side surfaces of the tube); hidden surfaces (lower, rear, inner surfaces of the cabinet details, pawns) are painted with soil / paint, covered with flox (volt), laminated.

Visible fittings: buttons and locks of drawers are made of aluminum with decorative coating. Hidden fittings for fixing the cabinet parts, rails of drawers are made of aluminum with a protective coating. The cabinet is mounted from above with supports using four screws (not included in the delivery) to the brackets of the front partition of the passenger cabin of the helicopter and through eight screws (not included in the delivery) from below to the previously installed guides on the floor of the passenger cabin of the helicopter.

The cost of the cabinet without taking into account the liquid crystal display and DVD player is ". The cost of a liquid crystal display is ". The price of the DVD player is ". The cabinet in assembled form is packed in a wooden box.

GRI 3(b) and 6

What import requires

Veterinary and sanitary control

Goods fall under supervision by their type and characteristics

  • Sanitary and epidemiological supervision (control)

    rule for the whole chapter 94
    Продукция (товары) для детей: игры и игрушки, постельное белье, одежда, обувь, учебные пособия, мебель, коляски, сумки (ранцы, рюкзаки, портфели и т. п.), дневники и аналогичные изделия, тетради, прочая канцелярская продукция (товары) из бумаги и картона, принадлежности канцелярские или школьные искусственные полимерные и синтетические материалы для изготовления продукции (товаров) детского ассортимента; Полимерные, синтетические и иные материалы, предназначенные для применения в строительстве, на транспорте, а также для изготовления мебели и других предметов домашнего обихода; мебель; текстильные швейные и трикотажные материалы, содержащие химические волокна и текстильные вспомогательные вещества; искусственные и синтетические кожи и текстильные материалы для изготовления одежды и обуви; Продукция машиностроения и приборостроения производственного, медицинского и бытового назначения, кроме запасных частей к транспортным средствам и бытовой технике (за исключением контактирующих с питьевой водой и пищевыми продуктами); Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры

    Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

  • ТР ТС 025/2012Safety of furniture products
    • мебель лабораторная, за исключением мебели медицинской лабораторной — declaration of conformity
    • мебель для учебных заведений — certificate of conformity
    • мебель для дошкольных учреждений — certificate of conformity
    • мебель для предприятий торговли, общественного питания и бытового обслуживания — declaration of conformity
    • мебель для гостиниц, здравниц и общежитий — declaration of conformity
    • мебель для театрально-зрелищных предприятий и учреждений культуры — declaration of conformity
    • мебель для административных помещений — declaration of conformity
    • мебель для вокзалов, финансовых учреждений и предприятий связи — declaration of conformity
    • мебель для судовых помещений (кают, кают-компаний, ходового мостика, центрального поста управления, помещений для отдыха, столовой, амбулатории) — declaration of conformity
    • столы (обеденные, письменные, туалетные, журнальные, компьютерные, столы для теле-, радио-, видеоаппаратуры, для телефонов, для террас и прихожих и другие изделия) — declaration of conformity
    • шкафы, тумбы, стеллажи, секретеры, комоды, трюмо, трельяжи и прочие изделия (сундуки, этажерки, ширмы, подставки, вешалки, ящики, полки и другие изделия) — declaration of conformity
    • мебель детская (столы, стулья, кровати, манежи, ящики для игрушек, кресла, диваны, шкафы, тумбы, табуреты, скамьи, матрацы, диван-кровати и другие изделия) — certificate of conformity

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

How it is done in practice

Valid documents in the EAEU unified register for subheading 9403 70: certificates 524, declarations 3,183.

By technical regulation
ТР ТС 025/20123,411ТР ТС 008/2011189ТР ТС 020/201175ТР ТС 004/201152ТР ЕАЭС 037/201614
Schemes
3д2,2281д5911с2864д2613с218The letter after the scheme number shows the form: certification or declaration of conformity.
Most active certification bodies
ТОО «КазСертик-А»ТОО «Текс»ОС Сертификат Плюс
Manufacturers outside the EAEU
China1,963Italy475Türkiye363Germany105Poland89United States73

Manufacturers of these goods →Check a supplier’s document by its number →

Payments on import

Duty for this code: 10% + EUR 0.075/kg. On top of the duty, on import into Russia you pay VAT of 22% (unless the goods are VAT-exempt) of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

Import VAT in EAEU countries

  • Russia22%
  • Kazakhstan16%
  • Belarus20%
  • Armenia20%
  • Kyrgyzstan12%

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

May be VAT-exempt

The exemption under list No. 1042 applies if the goods match the description and are registered as a medical device:

  • 9403 — Оборудование для кабинетов и палат, оборудование для лабораторий и аптек 94 5200 (термостаты электрические; установки стоматологические универсальные; оборудование кабинетов и палат; оборудование стоматологическое, зубопротезное, оториноларингологическое; оборудование рентгенологическое, радиологическое и равматологическое; оборудование лабораторное и аптечное; оборудование и агрегаты медицинские разные)
  • 9403 — Трости, костыли, опоры (в том числе ходунки, манежи, палки-опоры) 93 9670
  • 9403 — Специальные средства для самообслуживания и ухода за инвалидами (в том числе подушки и матрацы профилактические, противопролежневые и ортопедические, кровати медицинские с подъемными приспособлениями, фиксаторами, стулья и кресла функциональные, на колесиках, со съемными элементами, поручни, оборудование для подъема и перемещения, специальные приспособления для пользования средствами личной гигиены), специальные средства при нарушениях функции выделения (в том числе уропрезервативы, мочеприемники, мешки для сбора мочи, катетеры, ремни для крепления мешков для сбора мочи, вешалки-крючки для крепления мочеприемников, калоприемники, мешки, пластины и фильтры к калоприемникам, кольца защитные и эластичные полукольца, стержни для стомы, очистители для кожи, нейтрализаторы запаха, анальные тампоны, тампоны для стомы, ирригационные системы и рукава для стомы, пояса крепления калоприемников)
  • 9403 — Технические средства для оборудования помещений, используемые только для профилактики инвалидности или реабилитации инвалидов, включая обучение (в том числе адаптированные для инвалидов специальная мебель, осветительные приборы, специальные доски, лупы электронные, аудиоклассы, компьютерные классы, классы для слепоглухих, классы для занятий в положении лежа, подставки для учебников, приспособления для переворачивания страниц)

May be subject to 10% VAT

The 10% rate applies if the goods match a description from list No. 908:

  • 9403 70 000 8 из из из — Манежи детские
  • 9403 70 000 8 из из из из из из — Кровати детские
Calculate the whole deal →Quick payment estimate →

OKPD2 code

The match is set for the whole subheading, by the first six digits of the code

  • 31.09.14 — Мебель из пластмасс или прочих материалов (тростника, лозы или бамбука)

Correspondence keys of the Russian Ministry of Economic Development, edition of 20.07.2023. The ministry’s caveat: Ключи отражают возможные соответствия между кодами на уровне первых шести знаков ТН ВЭД ЕАЭС (основанной на ГС) и кодами ОКПД 2 (основанного на КПЕС) по состоянию на 1 января 2022 года. Предлагаемые соответствия не являются исчерпывающими и предназначены для использования в качестве вспомогательного материала для облегчения работы по установлению возможных вариантов корреляции кодов классификаторов в отношении соответствующих категорий товаров.

Настоящие переходные ключи (сопоставительные таблицы) разработаны на основе данных агентства Евростат Комиссии Европейского союза по корреляции кодов Гармонизированной системы описания и кодирования товаров (ГС) 2022 года и Статистической классификации продукции по видам экономической деятельности в Европейском союзе (КПЕС) 2008 года. Ключи отражают возможные соответствия между кодами на уровне первых шести знаков ТН ВЭД ЕАЭС (основанной на ГС) и кодами ОКПД 2 (основанного на КПЕС) по состоянию на 1 января 2022 года. Предлагаемые соответствия не являются исчерпывающими и предназначены для использования в качестве вспомогательного материала для облегчения работы по установлению возможных вариантов корреляции кодов классификаторов в отношении соответствующих категорий товаров. Услуги не являются объектом классификации в ТН ВЭД ЕАЭС и не включены в переходные ключи. По мере внесения изменений в ОКПД 2 и ТН ВЭД ЕАЭС переходные ключи при необходимости подлежат актуализации.

The right code is in the HS code search.