9007 20 000 0 — Cinematographic cameras and projectors, whether or not incorporating sound recording or reproducing apparatus: projectors

9007 Film cameras and film projectors containing or not containing sound recording or sound reproduction devices: 9007 10 – film cameras 9007 20 – film projectors – parts and accessories: 9007 91 – for film cameras 9007 92 – for film projectors

This heading covers: (A) Film cameras (including microfilm cameras). They are similar in principle to cameras of heading 9006, but contain specialized means for making a series of pictures in rapid succession. (B) Film cameras for recording both image and sound on the same film. (C) Film projectors, which are stationary or portable devices for the diascopic projection of moving images, having or not having an audio track on the same film. They have an optical system that is based on a light source, reflector, capacitor and projection lens. Projectors also have a mechanism, usually consisting of an obturator for transporting the film, which intermittently extends the film behind the optical system, usually at the same speed as the film was shot, and the light source closes as the film moves through the film channel. The light source in movie projectors is usually an electric arc lamp, but some projectors may use incandescent lamps. Cinemas can be equipped with a film rewinding device and a fan. Some projectors can be equipped with a two-circuit water cooling system. This heading covers special types of film projectors, for example projectors, which project images enlarged to varying degrees onto an optically flat surface, enabling scientific investigations of the phenomena photographed. "Frames" can be studied one at a time or continuously at different number of frames per second. On the other hand, in-movement viewing devices specially designed for film editing do not fall under this heading (heading 9010). Film projectors can be combined with sound recording or sound reproduction equipment, which is equipped with a reader,

including a photoelectric sound head and a charge-coupled device. The soundtracks of most commercial films are printed in dual format, that is, analog and digital. Analog audio tracks are printed between frames and perforations, while digital audio tracks are printed either at the edges of the film, outside the perf oration, or between perforation holes. Some commercial films are printed with analog audio track and digital synchronizing information only at the edges of the film, since the digital audio track is not printed on film, but recorded separately on a CD. When the film passes through the reader, the photoelectric sound head reads the analog audio track, and the charge-coupled device reads the digital audio track or, in the latter case, synchronizing information to ensure the synchronization of sound from the CD and the projected movie. Printing audio tracks in a double format makes it possible to reproduce sound if one of the sound tracks is damaged, or the equipment that reproduces sound does not have the ability to read the double format. Other film projectors may be equipped with a photovoltaic or magnetic sound head, depending on the process used to record the sound track, or sound heads of both types for alternate use. This heading covers film cameras, etc., both for the film industry and for use by amateurs. It also includes special camera types, for example, cameras designed for installation on airplanes (aerok imaging); waterproof cameras for underwater filming; cameras and projectors for shooting color, three-dimensional (stereoscopic) or “panoramic” films. Film equipment presented without optical parts falls within this heading. Subject to the provisions of Notes 1 and 2 to this Chapter (see general provisions), this heading also includes parts and accessories of the goods of that heading. Such parts and accessories include: housings, racks; ball and socket tripod heads; casings ("mufflers") intended to eliminate engine noise (other than those made of textile materials; they fall in heading 5911); boxes for portable film projectors intended to be used as racks for projectors; devices for cleaning tape (other than such devices for laboratory apparatus; they fall in heading 9010); multi-tiered film coils designed to supply film to a film projector with simultaneous winding of film. However, monopores, bipeds, tripods and the like are excluded (heading 9620). For instruments and apparatus (e.g., microscopes, strobes) equipped to record kines by matographic means, see the relevant part of the Explanatory Note to heading 9006. This heading also excludes: (a) lifting or handling equipment (e.g. cranes for moving a camera) of Chapter 84; (b) microphones, loudspeakers and electric amplifiers of sound frequency, other than those supplied with any of the instruments of this heading and forming an integral part thereof (heading 8518);

(c) sound recording or reproducing apparatus and video recording or reproducing apparatus (heading 8519 or 8521); d) photo-electric sound-heads (heading 8522); (e) television cameras (heading 8525); (f) video projectors (heading 8528); (g) apparatus and equipment for cinematographic laboratories, e.g., splicing presses, editing tables for processing film, etc. (heading 9010); (h) toy cinematographic projectors (heading 9503).

Notes

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. This group does not include:

(a) articles used in machinery, appliances or for other technical purposes, made of vulcanised rubber other than hard rubber (heading 4016), natural or composite leather (heading 4205) or textile material (heading 5911);

(b) support belts or other supporting articles of textile materials, the purposeful effect of which on the supported or fixed organ is only due to their elasticity (for example, bandages for pregnant women, chest bandages, abdominal bandages, joint or muscle locks) (Section XI);

(c) refractory articles of heading 6903; ceramic articles for laboratory, chemical or other technical purposes of heading 6909;

(d) optically raw glass mirrors of heading 7009 or of base or precious metal mirrors other than optical elements (heading 8306 or Chapter 71);

(e) the goods of heading 7007, 7008, 7011, 7014, 7015 or 7017;

(f) parts of general use referred to in Note 2 to Section XV of base metals (Section XV) or similar products of plastics (Chapter 39); however, articles specifically intended for use exclusively in implants used in medicine, surgery, dentistry or veterinary medicine are to be classified in heading 9021;

(ж) насосы с измерительными приборами товарной позиции 8413; счетное или контрольное оборудование, приводимое в действие силой тяжести взвешиваемого груза, или поставляемые отдельно разновесы для весов (товарная позиция 8423); подъемное или погрузочно-разгрузочное оборудование (товарные позиции 8425 – 8428); машины всех видов для резки бумаги или картона (товарная позиция 8441); приспособления для регулирования положения обрабатываемых деталей или инструмента на станках или водоструйных резательных машинах товарной позиции 8466, включая приспособления с оптическими элементами для считывания показаний приборов (например, «оптические» делительные головки), но за исключением тех устройств, которые сами по себе являются исключительно оптическими приборами (например, юстировочные телескопы); счетные машины (товарная позиция 8470); клапаны и другая арматура товарной позиции 8481; машины и аппаратура (включая аппаратуру для проецирования или нанесения рисунка маски на сенсибилизированные полупроводниковые материалы) товарной позиции 8486;

(з) прожекторы или фары, используемые на велосипедах или моторных транспортных средствах (товарная позиция 8512); портативные электрические фонари товарной позиции 8513; кинематографические аппараты для записи, воспроизведения или повторной записи звука (товарная позиция 8519); звуковые головки (товарная позиция 8522); телевизионные камеры, цифровые камеры и записывающие видеокамеры (товарная позиция 8525); радиолокационная аппаратура, радионавигационная аппаратура или радиоаппаратура дистанционного управления (товарная позиция 8526); соединители для волокон оптических, волоконно-оптических жгутов или кабелей (товарная позиция 8536); цифровые аппараты управления товарной позиции 8537; лампы герметичные направленного света товарной позиции 8539; волоконно-оптические кабели товарной позиции 8544;

(ij) floodlights or headlights of heading 9405;

(k) articles of Chapter 95;

(l) monopores, bipeds, tripods and similar articles of heading 9620;

(m) volume measuring tanks classified by the material from which they are made; or

(n) coils, reels or similar carriers (which are to be classified according to the material of which they are made, for example, in heading 3923 or in section XV).

2. Subject to the provisions of Note 1, parts and accessories to machinery, apparatus, tools or articles in this Chapter shall be classified according to the following rules:

(a) parts and accessories which are goods falling in one of the headings of this Chapter or of Chapter 84, 85 or 91 (other than heading 8487, 8548 or 9033) are in all cases classified in the relevant headings;

(b) other parts and accessories intended to be used exclusively or principally in a particular type of machine, tool or apparatus or in several machines, tools or apparatus falling under the same heading (including machinery, tools or apparatus of heading 9010, 9013 or 9031) are included with those machines, tools or apparatus;

(c) all other parts and accessories fall in heading 9033.

3. Notes 3 and 4 to section XVI also apply to this chapter.

4. Heading 9005 does not include telescopic sights for mounting weapons, telescopic periscopes for submarines or tanks, or sight-tubes fitted to machines, devices, instruments or apparatus of this Chapter or Section XVI; such telescopic sights and sight-tubes are classified in heading 9013.

5. Measuring or control optical devices, devices or machines which, but for this note, could be included in both heading 9013 and heading 9031 are classified in heading 9031.

6. For the purposes of heading 9021, the term “orthopedic devices” means devices for:

prevention or correction of bodily deformities; or

Supporting or fixing body parts after illness, surgery, or injury.

Orthopedic appliances include shoes and special insoles made for the correction of orthopedic conditions, provided that they are either (1) made to order standards, or (2) mass-produced, represented by one object and not in pairs and designed to be equally suitable for any foot.

7. Heading 9032 covers only:

(a) instruments and devices for the automatic control of the flow rate, level, pressure or other variable parameters of liquids or gases, or for the automatic control of temperature, whether or not their action is based on an electrical phenomenon varying according to the parameter to be regulated, which are designed to bring this parameter to the desired value and to keep it stable against disturbances, constantly or periodically measuring the actual value; and

(b) automatic regulators of electrical quantities and devices or devices for the automatic regulation of non-electrical quantities, the operation of which is based on an electrical phenomenon varying depending on the parameter to be regulated, which are designed to bring this parameter to the desired value and keep it stable from disturbances, constantly or periodically measuring the actual value.

Additional note

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. Термин «электронные» в подсубпозициях 9015 10 100 0, 9015 20 100 0, 9015 30 100 0, 9015 40 100 0, 9015 80 110 0, 9015 80 190 0, 9024 10 110 0, 9024 10 130 0, 9024 10 190 0, 9024 80 110 0, 9024 80 190 0, 9025 19 200 0, 9025 80 400 0, 9026 10 210 0, 9026 10 290 0, 9026 20 200 0, 9026 80 200 0, 9027 10 100 0, 9030 20 910 0, 9030 33 100 0, 9030 89 300 0, 9031 80 320 0, 9031 80 340 0, 9031 80 380 0 и 9032 10 200 0 означает приборы и аппараты, которые включают в себя одно или несколько изделий товарной позиции 8540, 8541 или 8542. Однако это не должно относиться к изделиям товарной позиции 8540, 8541 или 8542, функцией которых является исключительно выпрямление тока или которые входят в состав блока питания приборов или аппаратов.