Skip to content
IMEXP.RU
EAEU HS code

7301 20 000 0 — Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel: angles, shapes and sections

Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel: angles, shapes and sections

Names come in English where the EU Combined Nomenclature publishes them — chapters, headings and subheadings, whose first six digits are the same Harmonized System; deeper EAEU detail is a machine translation, marked as such. Official texts — tariff notes, measures, lists and classification rulings — are the original: customs and your broker go by that wording. Where we show a machine translation of them, it is marked; where our quality check rejected one, the Russian stays.

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

Duty rate
10%

This is the base rate. A tariff quota, a preference for the country of origin and a tariff exemption lower it; anti-dumping and special duties are paid on top of it

EEC Council Decision No. 80 of 14.09.2021

Supplementary unit
Not applicable
Requirements and measures
2

None: russian bans and restrictions, mandatory labelling, recycling fee, export control, EAEU non-tariff regulation, trade defence measures — duty on top of the tariff, tariff quota.

Whether a measure applies to your goods depends on their characteristics and the shipping documents

VAT
22%

The general import rate in Russia: Tax Code of Russia, Art. 164(3) (Federal Law No. 425-FZ of 28.11.2025). This code is not named on the 10% VAT list (Decree No. 908) or the exemption list (No. 1042). The list of medical goods No. 688 is not checked here.

Product reference in Word (in Russian)

Duties, taxes, fees, bans, permits and controls in one free file.

Import into Russia

Import reference

Export from Russia

Export reference

Import into Russia

Payments on import

Duty for this code: 10%. On top of the duty, on import into Russia you pay VAT of 22% of the customs value including the duty (Article 160 of the Tax Code) and the customs processing fee — a fixed amount by value band. Customs value: the price of the goods, delivery to the border, local costs.

CCT rate: the EAEU CCT as amended by Решение Совета ЕЭК № 80 от 14.09.2021, from 01.01.2022; our register has no later decisions on the rate for this code.

Customs fee scale by customs value, 2026
  • from 0 to 200,000 ₽1,231 ₽
  • from 200,000 to 450,000 ₽2,462 ₽
  • from 450,000 to 1,200,000 ₽4,924 ₽
  • from 1,200,000 to 2,700,000 ₽13,541 ₽
  • from 2,700,000 to 4,200,000 ₽18,465 ₽
  • from 4,200,000 to 5,500,000 ₽21,344 ₽
  • from 5,500,000 to 10,000,000 ₽49,240 ₽
  • over 10,000,000 ₽73,860 ₽

Fee per declaration. Russian Government Resolution No. 1637 of 28.11.2024 as amended by Resolution No. 1638 of 23.10.2025.

Import VAT in EAEU countries

  • Russia22%
  • Kazakhstan16%
  • Belarus20%
  • Armenia20%
  • Kyrgyzstan12%

Standard rate; each country has reduced rates and exemptions for some goods. The duty for the code above is the union one, the same for all

Customs declaration fee

  • Kazakhstan6 MCI per goods declaration, KZT 25,950 in 2026
  • BelarusBYN 50 for goods of chapter 73from Jan 1, 2027: BYN 55
  • ArmeniaAMD 3,500 for clearanceinspection and recording: AMD 1,000 per consignment up to 1 t and AMD 300 per each additional tonne
  • Kyrgyzstan0.4% of the customs valuenot less than 5 and not more than 2,500 calculation units
Calculate the whole deal →Quick payment calculation →

Documents required

A summary across all the lists we check: the document, its legal basis and whether it covers the whole code. Details are in the sections below.

Export ban

applies to goods bought in that country or from its companies

  • EUРегламент Совета ЕС № 833/2014, приложение XXIII (промышленные товары)
  • United KingdomРегламент Великобритании о санкциях против России 2019 года, приложение 3E (товары зависимости G7)
  • USAПравила экспортного контроля США (EAR), часть 746, дополнение № 4 (промышленные товары)

Goods in customs transit may be tracked with a navigation seal: this depends on the route and procedure, not on the code (EAEU Agreement of 19.04.2022, EEC Board Decision No. 84).

Customs declaration hints

Boxes 33, 36, 44, 47

Which codes go into the boxes of the goods declaration for this product. The codes come from the classifiers of Customs Union Commission Decision No. 378. Reliefs, document types and excise depend on the shipment, so such lines carry a condition.

Box 33 · Commodity code

  • 7301200000
  • Сin the second subdivision, if the goods do not fall under the bans and restrictions that apply to the code
  • Оin the second subdivision, if goods with different names are declared under one code

Box 36 · Preference

  • ОООО-ООFees, duty, excise, VAT: no relief claimed, no excise (dash)

Box 44 · Documents produced

  • 01408Документ об оценке соответствия, предусмотренный законодательством государства – члена Евразийского экономического союза, на территории которого продукция (товар) помещается под таможенные процедуры · Постановление № 2425

Box 47 · Calculation of payments

  • 1010Таможенные сборы за совершение таможенных операций (за таможенное оформление товаров, за таможенное декларирование товаров, за таможенные операции)
  • 2010Ввозная таможенная пошлина (иные пошлины, налоги и сборы, имеющие эквивалентное действие), обязанность по уплате которой возникла с 1 сентября 2010 г.
  • 5010Налог на добавленную стоимость

Completion rules and classifiers: Решение Комиссии Таможенного союза от 20.05.2010 № 257; классификаторы — Решение Комиссии Таможенного союза от 20.09.2010 № 378

Each requirement in detailParallel import · Veterinary, plant quarantine and sanitary control · Conformity assessment · How it is certified

Parallel import

The code falls under the list of Order No. 2701 of the Russian Ministry of Industry and Trade: goods put on the market abroad by the right holder or with its consent may be imported without the right holder's consent, but only under the trademarks of the item.

  • Item 208 · 73

    ACURA, AE, ALFA ROMEO, ASTON MARTIN, AUDI, BENTLEY, BERAL, BERU, BLUEPRINT, BMW, BORGWARNER, BOSCH, BREMBO, BUGATTI, CADILLAC, CHAMPION, CHEVROLET, CHRYSLER, CONTITECH, DAEWOO, DAF TRUCKS, DAIHATSU, DAIMLER, DATSUN, DAYCO, DELPHI, DENSO, DODGE, elring, FAG, FEBI, FEDERAL MOGUL, FERODO, FERRARI, FIAT, FILTRON, FP DIESEL, FRAM, FREIGHTLINER, GATES, GENERAL MOTORS (GM), GLYCO, GMC, GOETZE, GSP, HELLA, HONDA, HUMMER, HYUNDAI, INA, INFINITI, JAGUAR, JEEP, KENWORTH, KIA, KYB, LAMBORGHINI, LAND ROVER, LEMFÖRDER, LESJÖFORS, LEXUS, LINCOLN, LUK, MACK TRUCKS, MAHLE, MANN, MASERATI, MAYBACH, MERCEDES-BENZ, MINI, MITSUBISHI, MOOG, NARVA, NEOLUX, NGK, NTK, NISSAN, NISSENS, NTN SNR, NURAL, OSRAM, PAYEN, PETERBILT, PHILIPS, PORSCHE, ROLLS-ROYCE, ROVER, SAAB, SACHS, SCANIA, SEAT, SIEMENS, ŠKODA, SMART, SUBARU, SUZUKI, SWAG, TESLA, TOYOTA, TRW, VICTOR REINZ, VOLKSWAGEN, VOLVO, WABCO, WABTEC, WAGNER

Veterinary, plant quarantine and sanitary control

Goods fall under supervision by their type and characteristics

  • Sanitary and epidemiological supervision (control)

    rule for the whole chapter 73
    Материалы, изделия и оборудование, контактирующие с пищевыми продуктами; Иная продукция (товары), в отношении которой одним из государств – членов Евразийского экономического союза введены временные санитарные меры

    Решение Коллегии Евразийской экономической комиссии от 17.09.2019 № 154

Conformity assessment

May apply

Whether the goods fall under a regulation depends on their name and characteristics. Check them against the list

  • Постановление № 2425Единый перечень продукции: сертификация и декларирование в РФ
    • Средства индивидуальной защиты (бронеодежда) — certificate of conformity (part of the heading) · ГОСТ 34286-2017

Checked: the consolidated list of Government Decree No. 2425 and the lists of 42 technical regulations out of 52 adopted. The others have no list by HS code, so see the full list of regulations.

How it is certified

Valid documents in the EAEU unified register for subheading 7301 20: certificates 0, declarations 2.

By technical regulation
ТР ТС 010/20111ТР ТС 018/20111
Schemes
1д2The letter after the scheme number shows the form: certification or declaration of conformity.
Manufacturers outside the EAEU
China2

Manufacturers of these goods →Check a supplier’s document by its number →

Export from Russia

Documents required

A summary across all the lists we check: the document, its legal basis and whether it covers the whole code. Details are in the sections below.

Our lists contain no bans, permits or special documents for exporting this code.

Import ban

applies to sales to that country

  • EUРегламент Совета ЕС № 833/2014, приложение XVII (чёрные металлы)
  • United KingdomРегламент Великобритании о санкциях против России 2019 года, приложение 3B (чёрные металлы)

Customs declaration hints

Boxes 33, 47

Which codes go into the boxes of the goods declaration for this product. The codes come from the classifiers of Customs Union Commission Decision No. 378. Reliefs, document types and excise depend on the shipment, so such lines carry a condition.

Box 33 · Commodity code

  • 7301200000
  • Оin the second subdivision, if goods with different names are declared under one code

Box 47 · Calculation of payments

  • 1010Таможенные сборы за совершение таможенных операций (за таможенное оформление товаров, за таможенное декларирование товаров, за таможенные операции)

Completion rules and classifiers: Решение Комиссии Таможенного союза от 20.05.2010 № 257; классификаторы — Решение Комиссии Таможенного союза от 20.09.2010 № 378

Classification

Where it sits in the nomenclature

Section XV. Base metals and articles of base metal

  1. 73Articles of iron or steel
  2. 7301Sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements; welded angles, shapes and sections, of iron or steel
  3. 7301 20Angles, shapes and sections, of iron or steel, welded
  4. 7301 20 00Angles, shapes and sections
  5. 7301 20 000 0you are here

Explanatory notes to heading 7301 2 paragraphs

Machine translation from Russian. The original is the EEC explanatory note, and that is what a classification dispute is argued from; the translation is for understanding and has no legal force.

7301 Structures of ferrous metals, drilled or undrilled, perforated or non-perforated, monolithic or made of prefabricated elements; corners, shaped and special profiles welded, of ferrous metals: 7301 10 – constructions of scab 7301 20 – corners, shaped and special profiles

Sheet piling consists of sections obtained by rolling, drawing, extrusion, bending on presses or on roll-forming machines, or by assembling rolled parts (e.g., by riveting, welding, crimping). These sections can be joined to one another either simply by interlocking or by overlapping their longitudinal edges. For this purpose both types of such piling have, at least on the longitudinal edges, joining devices (e.g., grooves, flanges, tongues). This heading includes: (1) Corner or ribbed parts of sheet piling, which are sections designed to form corners; for this purpose either bent sections are used, or sections cut along their entire length, the parts so obtained then being welded or riveted at an angle to each other. (2) Junction sections of sheet piling with three or four branches for forming partition walls. (3) Junction sections of sheet piling whose shape enables them to be used for joining different types of sheet piling. (4) Channel sheet piling and columns which are driven into the ground in such a way that they are joined without positive interlocking. Channel sheet piling is corrugated in shape. Sheet piling columns are made of two sections welded together. Sheet piling is used mainly for building walls in sandy, water-saturated or submerged soils for civil engineering works such as dams, dikes or trenches. This heading also covers welded angles, shapes and sections. The Explanatory Note to heading 7216 applies, mutatis mutandis, to sections obtained by welding. The heading excludes: (a) Welded hollow profiles (heading 7306). (b) Sheet piling assembled into piles, which has no "locks" for external joining (heading 7308).

Official text adopted by a Recommendation of the EEC Board

Notes to chapter 73 — Articles of iron or steel 3 items

Notes

English text as published in Annex I to Regulation (EU) 2021/1832 (Combined Nomenclature). The EAEU tariff and the EU nomenclature copy these notes from the same convention. For a Russian declaration the binding version is the Russian one: Annex to Decision No 80 of the EEC Council of 14 September 2021.

1. In this chapter, the expression ‘cast iron’ applies to products obtained by casting in which iron predominates by weight over each of the other elements and which do not comply with the chemical composition of steel as defined in note 1(d) to Chapter 72.

2. In this chapter, the word ‘wire’ means hot- or cold-formed products of any cross-sectional shape, of which no cross-sectional dimension exceeds 16 mm.

Additional note

Machine translation. The original is the Russian text of the EAEU tariff, and customs goes by it; this translation is for understanding only and has no legal force.

1. Drilling pipes are used for descent into a borehole and lifting a rock-destroying tool, transferring rotation, creating an axial load on the tool, supplying a washing fluid or compressed air to the bottom. There are ordinary, weighted and leading drill pipes.

Ordinary drill pipes (heading 7304) - usually one-piece round cross-section, are connected by means of drill locks or semi-locks with special large conical threads.

Weighted drill pipes (heading 8431) are usually round or square cross-sections with an increased wall thickness; they are also connected by thread and serve to increase the stiffness of the lower part of the column and to place a load on the rock-destroying tool.

Leading drill pipes (heading 8431) - multifaceted cross-section, are placed at the top of the column of drill pipes and transmit it rotation from the rotator of the drilling rig.

The right code is in the HS code search.